i tried installing several rom's on my yp-g70cb int and it starts reading zip file and gives error message device is "herring" instalation failure status 7
help please
Gingerbread: cwm 5.0.27
Jelly bean: cwm 6.0.32
Jelly bean 4.3x: cwm 6.0.4.6
KitKat: cwm 6.0.49
This means if your trying to go to kitkat or jelly bean, then you need to go in that order to go to your ROM.
Sent from my YP-G70 using XDA Free mobile app
Related
This is my first Droid and I'm trying to put in cm10 custom ROM, jellybean 4.2.2 on my t879 note. I am pretty much following the directions but to no avail. I have a note t879, cmw 5.3 i believe, cm10 ROM, and the gapps.
The errors I'm getting is the no data error when finding the ROM in recovery or the series 7 error when installing and it aborts. Please help me with this process.
This forum is for the i717
Sent from my SAMSUNG-SGH-I717 using xda premium
Hi to all,
I am newbee to android. After using HTC One V for few months I purchased Samsung Galaxy S2 GT-I9100 from UAE. It was running Jellybean 4.1.2 having Modem XXLS8. On a fine day for the requirement of built in call recording I rooted my phone and managed to install Omega Rom V23.
All went smooth. But next day I realised that Hindi fonts are not properly displaying and I made a big mistake to flash Omega Rom again. This time I stucked in BootLoop . Everything tried. Finally I gave up
I thought flashing back may work so I flashed available stock Gingerbird rom via odin. Now system is back running Stock Gingerbird Android with modem XXKI4. Then I tried to update GB to JB via OTA and Kies, But OTA and kies refused to update software.
Please give me any solution to get back my 4.1.2 version or tell me any idea to get Custom Rom Omega V23. Will it safe to flash Omega V23 4.1.2 directly on current 2.3.6 rom with Philz latest kernels?
Sent from my GT-I9100 using xda app-developers app
Yes you can, you're gonna have to root it tho.
Sent from my GT-I9100 using xda app-developers app
Thanks. Can I root present 2.3.6 Gingerbird and Install Custom Rom Omega v23 4.1.2 directly? Or I have to reinstall stock version 4.1.2 over current 2.3.6 Gingerbird?
Sent from my GT-I9100 using xda app-developers app
Well, the latest CMW version might be better, is not mandatory to go 4.1.2 tho.
Sent from my GT-I9100 using xda app-developers app
gastonw said:
Well, the latest CMW version might be better, is not mandatory to go 4.1.2 tho.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I am not getting it. Please spoon feed me. I will be in debt.
I tried following steps:
I download Omega V23 custom rom and kernel - PhilZ-cwm6-XWLSN-OXX-4.93.6-signed and placed it on SDCard. After going into stock recovery I applied Philz Kernel via Stock Recovery. But getting error in red-
E:Failed to verify whole file signature
E:Signature verification failed
Please give me any solution. I dont have enough previlage to post into Android Development Forum as I am newbee here.
Sent from my GT-I9100 using xda app-developers app
dg081081 said:
Hi to all,
I am newbee to android. After using HTC One V for few months I purchased Samsung Galaxy S2 GT-I9100 from UAE. It was running Jellybean 4.1.2 having Modem XXLS8. On a fine day for the requirement of built in call recording I rooted my phone and managed to install Omega Rom V23.
All went smooth. But next day I realised that Hindi fonts are not properly displaying and I made a big mistake to flash Omega Rom again. This time I stucked in BootLoop . Everything tried. Finally I gave up
I thought flashing back may work so I flashed available stock Gingerbird rom via odin. Now system is back running Stock Gingerbird Android with modem XXKI4. Then I tried to update GB to JB via OTA and Kies, But OTA and kies refused to update software.
Please give me any solution to get back my 4.1.2 version or tell me any idea to get Custom Rom Omega V23. Will it safe to flash Omega V23 4.1.2 directly on current 2.3.6 rom with Philz latest kernels?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I guess you did not make backup of your original ROM... i would recommend that you install ics first before installing jb or custom jb roms... you can get stock ones samfilmware.. when try installing omega ROM again make sure you back your ROM this time so will not start all over again if a problem occurs at any time had same problem bootloop because of the kernel that was installed just did a full wipe fixed it for me and reinstall over again
slimlo said:
I guess you did not make backup of your original ROM... i would recommend that you install ics first before installing jb or custom jb roms... you can get stock ones samfilmware.. when try installing omega ROM again make sure you back your ROM this time so will not start all over again if a problem occurs at any time had same problem bootloop because of the kernel that was installed just did a full wipe fixed it for me and reinstall over again
Click to expand...
Click to collapse
Yepp..You are not getting it. System is running GingerBread with Stock Recovery. I can make backup in CWM recovery only. But right now my problem is that Philz Kernel is not installing. It will give me CWM Recovery and it will root the device. Any solution for above error??
Sent from my GT-I9100 using xda app-developers app
philz does not work on gingerbread ------------->>>> Philz
slimlo said:
philz does not work on gingerbread ------------->>>> Philz
Click to expand...
Click to collapse
Then I have to flash stock 4.1.2 firmware via Odin Am I right?
Sent from my GT-I9100 using xda app-developers app
I'm Running STock rom with CWM v5.5 now. Need a custom ROM 4.2 for my device Symphony w125. Anybody who using custom on this device please share this with me
how to install cwm for symphony w125 anybody help me
need a custom ROM 4.2 for my device Symphony w125. Anybody who using cwm on this device please share this with me
please help me
yea me too
I am also using cwm 5.5 any 4.3 or 4.2 ROMs?? The previous xolo q800 ROMs don't work! So we couldn't get the taste of or hard work!
I can't install any custom ROM from SD card....when I go to TWR/CWR recovery mode and select "install zip from SD card" and select the ROM on that time show this message "installation abroted" Please give me a solution..........
Sent from my W125 using xda app-developers app
I have some questions about my phone. I want to install JB and now i have ICS 4.0.3. The problem is that i can't install JB because i have Insane chip. Some people say that, if I install Siyah Kernel(safe kernel) i can install JB without any problems. But after i try to install Siyah 5(with CWM), i get a message like "Installation aborted".Also this phone is rooted, have a stock ROM and have CWM v3.15. How i can install JB(i want Slimbean)?
Grab a official fb firmware and flash it with odin then install philz kernel (odin version) cuz it dont change binary counter (no yellow triangle)
After that go in recovery and flash slim bean zip file and gapps (optionally)
Sent from my GT-I9100 using XDA Premium 4 mobile app
krazy1101 said:
Grab a official fb firmware and flash it with odin then install philz kernel (odin version) cuz it dont change binary counter (no yellow triangle)
After that go in recovery and flash slim bean zip file and gapps (optionally)
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah siyah is absolutely safer way to start after flashing it through odin grab a stock or custom jb rom and flash it
also check for the latest version of the cwm
Installations get aborted mainly due to the older versions of cwm
Gud luck mate
rxgamer said:
I have some questions about my phone. I want to install JB and now i have ICS 4.0.3. The problem is that i can't install JB because i have Insane chip. Some people say that, if I install Siyah Kernel(safe kernel) i can install JB without any problems. But after i try to install Siyah 5(with CWM), i get a message like "Installation aborted".Also this phone is rooted, have a stock ROM and have CWM v3.15. How i can install JB(i want Slimbean)?
Click to expand...
Click to collapse
As you can see siyah has last update on feb. So it's better to use different kernel instead of siyah.
Sent from my iPhone using Tapatalk - now Free
I was using http://forum.xda-developers.com/showthread.php?t=1290468 rom.
Now while trying to install
http://forum.xda-developers.com/showthread.php?t=2580489
http://forum.xda-developers.com/showthread.php?t=1436854
Both give status 7 error while in cwm recovery
older roms such as rootbox v3.7.1 and jellybam v6.0.0 are installing fine.
Are the above stated roms not suitable for sgs2 i9100i
Probably you should first read the instructions before starting to flash ...
You need CWM recovery > 6.0.4.x otherwise it will not flash.
Sent from my Nexus 7 using xda app-developers app