Guys this is my 1st post ,
i do have the Stock rom and the Kernel wth me but when i try to connect into FLASHMODE it doesnt install the drivers, it gives errors sometime SEMC or SOMC didnt install and the component has been corrupted, it shows me as S1 Boot Download with a yellow exclamation mark, i tried SEUS PC Companion, Restoring the OS, uninstalling all drivers and reinstalling, updating the bios changing usb ports, chaged the usb cable, but nothing is gettng this S1 BOOT DOWNLOAD driver installed, iam stuck at this point and i cant flash my stock kernel,
Please if you have any other way or solution please help me
Which windows version are you using?
Did you try this with other computer? If not try in a computer where windows 7 installed.... It will automatically install all the drivers for both flashmode as well as for fastboot... If you are on win8 or 8.1 let me know I will get you the solution
Related
Hello, it's my first post here at XNAdevelopers. I have a problem with my x10i: when i flashed my x10i to the 2.3.3 GB prerooted, i wanted to have xrecovery (don't know why it wasn't installed) , so i opened the flashtool and connected my x10i to the PC via USB cable, turned on USB debugging mode and after that my PC (Win7) showed me that the drivers were not installed. So the Flashtool does not detect my x10i. What should i do to get it working?
I have just installed the right drivers, please delete the theme.
did u install the correct drivers ??? and did u connect ur phone in debugging mode and applied the drivers ???
mate even i m facing same issue. help help.. and what it mean by correct drivers.. wich one shuld i install
Hello,
i got a little Problem with my X10 (2.3.3 - rooted) and my Notebook (Acer - Win 7 64 bit).
I tried all ways to install the driver to use USB-Debugging but it won't install. The Device-Manager still tells me SEMC USB as unknown
I tried the usual way, start the phone with holding 'back', install the drivers manually...
Are there any other ways to get it working ?
Same goes for me,
Device manager states that the device is unknown, flashtool not working, PC companion no hope (connected to different USB ports including those of the motherboard).
it used to work but no chance now.
it charges normally from the USB (Orange LED) but would not connect to the PC.
Details:
Windows 7 x64
Gigabyte X58A-UD3R
Bootloader Unlocked Xperia X10 with 2.3.3 ROM and Doom's Kernel (the latest one)
The guy here says it is related to either windows windows update or faulty cable
http://android.modaco.com/topic/347751-flash-mode-not-working/
Didn't help...
But installing PC Companion did it
PC Companion install drivers automaticlly,that is the best solution.
RQ-1 said:
Didn't help...
But installing PC Companion did it
Click to expand...
Click to collapse
Sent from my xperia "z10i"
I tried removing and installing PC Companion but it didn't work either.
Any help guys?
Changing the computer had no effect as well
You must install SEUS ( Sony Ericsson Update Service ). Only SEUS will install right driver. Problem with SEUS is that when you look on SE official site, they tell you that SEUS for X10 no longer persist, and they guide you to PC companion which is crap.
Try this: try to connect your phone with PC, in flash mode. PC will try to install your phone driver but it can't find it. Then in Action Centar, on PC, (a small flag in sys tray, right down corner of a screen) find solution for this problem, and windows will automatically find SEUS over net. Install and enjoy.
from X10i via XDA premium
tried that but no luck as well (even in flash mode SEUS can not detect the device)
Thank you
hello i found a way and it worked for me download flash tool and extract it look for a folder called drivers in there u will find something called ggsetup-2.2.0.10
run this install it and all done
@huzi7868 thank you for your help
However, that didn't succeed and I reinstalled windows and drivers again, but still not working
Even no luck when the phone is in flashmode
Just tried it on a third Computer and checked the cable but the cable is working on another HTC Desire but not on my Xperia X10 (I mean my X10 cable), however they are both charging
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
a.monteiro said:
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
Click to expand...
Click to collapse
I agree, I also have solved in this way.
Download the latest version of Flashtool and after installing it you will find in the "drivers" folder the file "Flashtool-Drivers.exe".
Run it and select the drivers you need. Then connect again your Xperia X10
I really appreciate your help, but I had done that 3 times and on different computers but "USB Device not recognized"
As I sad before, use SEUS to install SEMC USB DRIVER. I have win 7 64bit, and I install driver on it. First, install Update service. When its finished, start Update Service and follow instruction (check "Licence Agree" button, and click next, then pick your phone, X10i I suppose, be carefull there is two X10, One is X10, and other is X10 SO-01b. I pick X10 for myself, and press NEXT. Turn off your phone, press and hold BACK button on phone while connecting with PC via USB. HOLD till you see message to release BACK button. Till then your driver will be installed.
Download SEUS from here http://www.megaupload.com/?d=SBDVZ3DG
@Dzufa Thank you, but I had done that before and tried it again, whenever I connect the phone pressing the back button the green LED illuminates and "USB device is not recognized" appears and nothing happen after that, SEUS just behaves like nothing is connected.
Try with this one. And I think you must be online, because SEUS must download some files.
I really did that and of course updated SEUS, as I said green LED illuminates and nothing happens even in flash tool (it used to work for ages but suddenly it stopped, it only charges)
BTW, I had flashed many kernels and ROMs before it happened so I am quite familiar with flashtool and SEUS, I unlocked the bootloader using 9lucas method and it worked after that I installed XSP ROM and the USB worked as well, however after 2 weeks or so, one day I left it connected it to the PC and I found that the phone turned off and refused to power on, I left it for a while in the charger then powered it on and it powered on, then it has refused to connect to the PC through USB since then.
Please someone advise
I have read about a million threads and am unable to find the answer
My SE x10 mini e10i is in a constant boot loop showing the SE logo
I have tried using SEUS and it worked first time around,but after having tried a different rom to flash again with same problem
This time around it wont repair saying that the version is up to date
Also same with PC companion
First time around Flashtool did not work when I had my phone in USB debugging mode and started to flash it put USB debugging mode off and rebooted the phone. The only ftf that worked was nAa-08 - 2.6.29.6 loader and kernel. The rest of them it gave me the error of USB debugging turned off.
Now it doesn't even want to pass the logo and there is not CWM or xrecovery on the phone. When i try to flash it,the phone resets out of Flash mode and says USB debugging if off please turn on
Please if someone can advise. I even tried updating USB drivers,changing admin rights ex.
Damion1983 said:
Please someone advise
I have read about a million threads and am unable to find the answer
My SE x10 mini e10i is in a constant boot loop showing the SE logo
I have tried using SEUS and it worked first time around,but after having tried a different rom to flash again with same problem
This time around it wont repair saying that the version is up to date
Also same with PC companion
First time around Flashtool did not work when I had my phone in USB debugging mode and started to flash it put USB debugging mode off and rebooted the phone. The only ftf that worked was nAa-08 - 2.6.29.6 loader and kernel. The rest of them it gave me the error of USB debugging turned off.
Now it doesn't even want to pass the logo and there is not CWM or xrecovery on the phone. When i try to flash it,the phone resets out of Flash mode and says USB debugging if off please turn on
Please if someone can advise. I even tried updating USB drivers,changing admin rights ex.
Click to expand...
Click to collapse
bad luck 4 u......
i have this problem like this x10mini(my friend phone).....seus not work....flashtool say usb debugging if off...
but PC companion work for me...
SE X10mini with GINGER-DX
HAAHAHAH!!!
Can't believe it,after no sleep and lots of coffee
Got it working,plus flashed GingerDx which is one awesome amazing rom
The whole problem was with Windows 7
After extensive googling, I came across information that Windows 7 compatibility has issues with USB Debugging drivers
Had to set restrictions within Windows and then force install specified drivers
I used Flashtool with admin rights and first tried to flash a whole .ftf but did not succeed
The only .ftf that flashed was the E10_nAa-08_2.6.29.6-nAa-08.ftf
but that only includes a kernel and loader (but which helped me to be able to enter recovery
This is where i copied the Gingerdx.zip file on my SD card and tried to install
Did not work thou,baseband issue like before
So I took a chance,went back to Flashtool and tried to flash another .ftf file
2 of them failed due to the USB debugging issue. I un-installed the USB driver from computer manager,set Flashtool to only install baseband files and then hooked my phone up in flashmode plugged it in and wola,the driver like before installed (correct one for flash and not mass storage)
Thus from here did the whole .ftf flash and then in recovery mode installed the GingerDx.zip which worked now due to the baseband being correct
Thank you coffee,screw you Windows 7 (PS : also being 64bit)
And thank you for one awesome O/S stelios97
Sir I have encountered problem like yours, but with SE WT19i Live,
Please Elaborate this one..
Flashtool to only install baseband files and then hooked my phone up in flashmode plugged it in and wola,the driver like before installed (correct one for flash and not mass storage)
Hello everyone,
Yesterday I have bricked my Sony Ericsson Xperia Neo (MT15i, Stock ICS .431 kernel). I was ready to install a custom ROM from CWM, I wiped the battery status, I made a factory reset, then I tried to install the ROM from SD card, but the ROM wasn't there because I am dumb and I forgot to put it in SD. So I restarted my phone and discovered that my phone was bricked.
It freeze at Sony logo (it doesn't make a bootloop) and I can't enter in CWM. It was not the first time when I bricked my phone, so I knew that I have to reflash the original kernel. I opened FlashTool but it says it needs the drivers installed, so I installed them from Flashtool/drivers folder but I get the same message. I tried to install also the adb drivers and the drivers from Sony's site but nothing changes.
The problem is that I can't use flashtool.
Some aditional informations:
- my phone was rooted ;
- my phone had the bootloader unlocked ;
- my phone was running the Stock Android ICS firmware (.431) ;
- my phone was rooted and bootloader-unlocked from the same PC, but a different OS ;
- the adb drivers were not installed on my current PC (I have reinstalled Windows so I don't have the drivers installed) ;
Is there any solution for me to unbrick my Xperia Neo?
I couldn't find any way to unbrick it.
I put some screenshots to see what I see.
Since you have unlocked bootloader you can flash a kernel so that you will get cwm back... From there install rom you wanted...
Or try using flashtool from a different computer...
Sent from my Xperia Neo V using xda app-developers app
R: [Q] I can't use Flashtool to unbrick my Xperia Neo
If you have done what you have writtten it should be not bricked, just phone cannot load system because you have erased it with factory reset.
So now if you have bl unlocked the fastesr way is to get a kernel with cwm inside to install a rom compatible with that kernel (try suave v6 or lupus or night elf for ICS). To flash kernel you have to get fastboot drivers then use flashtool or command line.
The other way is to flash a whole stock firmware with flashtool in flash mode, then do what you want.
The flashtool problem seems to be missing drivers, so my hints are:
-try to change usb port
-try to change usb cable
-try to reinstall flashtool flashing drivers (you should find it into flashtool folders, if you can't then search over the internet)
-try to reinstall fastboot drivers (when you have drivers you need to disable windows driver signature check to install it, search the internet how).
Are you trying to flash a firmware connecting phone in fastboot mode (blue light)? If so you are wrong, to flash a firmware you need to enter in flash mode (green light). I'm saying this because I see S1tool driver in windows and that is shown (as I know) when you connect phone in fastboot mode.
If this is not working I don't know how to help you.
Sent from my MT15i using xda app-developers app
Solved!
Bertellio said:
The flashtool problem seems to be missing drivers, so my hints are:
-try to change usb port
-try to change usb cable
-try to reinstall flashtool flashing drivers (you should find it into flashtool folders, if you can't then search over the internet)
-try to reinstall fastboot drivers (when you have drivers you need to disable windows driver signature check to install it, search the internet how).
Click to expand...
Click to collapse
Thanks man, I really really wouldn't understand how to fix my phone without your help
Here is what I did and what happened:
1) I installed the following drivers from Flashtool/drivers/Flashtool-drivers.exe
- Sony Ericsson Xperia arc, neo etc. ;
- Flashmode Drivers ;
- Fastboot Drivers ;
2) I chose "MT15_4.1.B.0.431_Global.ftf", the stock ICS kernel from Sony ;
Connected in flashmode (GREEN LED) ;
Windows updated automatically S1Fastboot ;
Flashing failed!
3) Chose "MT15_4.1.B.0.431_Global.ftf" (the same kernel) ;
Connected in flashmode (GREEN LED) ;
Flashing succeeded!
4) Boot up - finaly see the XPERIA logo.
I solved it in 10-15 minutes, the first boot took like 3 minutes. So simple!
The flashmode and fastboot drivers were missing.
I lost my root and I have relocked my bootloader during this but it's not a big deal, I can anytime get them back. Also I had a ROM backup in SD card, made with CWM, so I can get them back.
Hope someone with the same problem will see!
Thanks again Bertellio!
Hello, I´ve searched for solution of my problem all day, but cannot find way to solve that..
I have xperia PRO MK16i and I wanted to update it on Jelly Bean with Pacman Custom ROM. But in recovery mode, when I was updating, it suddenly aborted.. it wrote something with "status 7, update aborted" ...and now I can´t do anything with it, phone doesn´t boot and it´s stucked in SONY logo..
So I wanted to return back to previous firmware (ICS 4.0.4) via flashtool, but I have another problem.. when I plug the device in fastboot mode, pc doesn´t recognize it and flashtool is always showing that window with process that I should power off device, plug usb cabel into pc with fastboot mode.. device has blue led next to hdmi port, but regardless of it nothing happens...
I installed SDK manager with hope I can repair it but still have the same issue... adb drivers don´t seem to work..
Every help will be appreciated.. btw, sorry for my english, I´m not from english speaking country, but I hope u understand my problem :/
PS: have windows 8 (x64) on my laptop
pilli_sk said:
Hello, I´ve searched for solution of my problem all day, but cannot find way to solve that..
I have xperia PRO MK16i and I wanted to update it on Jelly Bean with Pacman Custom ROM. But in recovery mode, when I was updating, it suddenly aborted.. it wrote something with "status 7, update aborted" ...and now I can´t do anything with it, phone doesn´t boot and it´s stucked in SONY logo..
So I wanted to return back to previous firmware (ICS 4.0.4) via flashtool, but I have another problem.. when I plug the device in fastboot mode, pc doesn´t recognize it and flashtool is always showing that window with process that I should power off device, plug usb cabel into pc with fastboot mode.. device has blue led next to hdmi port, but regardless of it nothing happens...
I installed SDK manager with hope I can repair it but still have the same issue... adb drivers don´t seem to work..
Every help will be appreciated.. btw, sorry for my english, I´m not from english speaking country, but I hope u understand my problem :/
PS: have windows 8 (x64) on my laptop
Click to expand...
Click to collapse
Probably its some Windowsish mess. I would try other operating system, you can download live CD for any linux and try to run it there. Should work like charm.