Please someone advise
I have read about a million threads and am unable to find the answer
My SE x10 mini e10i is in a constant boot loop showing the SE logo
I have tried using SEUS and it worked first time around,but after having tried a different rom to flash again with same problem
This time around it wont repair saying that the version is up to date
Also same with PC companion
First time around Flashtool did not work when I had my phone in USB debugging mode and started to flash it put USB debugging mode off and rebooted the phone. The only ftf that worked was nAa-08 - 2.6.29.6 loader and kernel. The rest of them it gave me the error of USB debugging turned off.
Now it doesn't even want to pass the logo and there is not CWM or xrecovery on the phone. When i try to flash it,the phone resets out of Flash mode and says USB debugging if off please turn on
Please if someone can advise. I even tried updating USB drivers,changing admin rights ex.
Damion1983 said:
Please someone advise
I have read about a million threads and am unable to find the answer
My SE x10 mini e10i is in a constant boot loop showing the SE logo
I have tried using SEUS and it worked first time around,but after having tried a different rom to flash again with same problem
This time around it wont repair saying that the version is up to date
Also same with PC companion
First time around Flashtool did not work when I had my phone in USB debugging mode and started to flash it put USB debugging mode off and rebooted the phone. The only ftf that worked was nAa-08 - 2.6.29.6 loader and kernel. The rest of them it gave me the error of USB debugging turned off.
Now it doesn't even want to pass the logo and there is not CWM or xrecovery on the phone. When i try to flash it,the phone resets out of Flash mode and says USB debugging if off please turn on
Please if someone can advise. I even tried updating USB drivers,changing admin rights ex.
Click to expand...
Click to collapse
bad luck 4 u......
i have this problem like this x10mini(my friend phone).....seus not work....flashtool say usb debugging if off...
but PC companion work for me...
SE X10mini with GINGER-DX
HAAHAHAH!!!
Can't believe it,after no sleep and lots of coffee
Got it working,plus flashed GingerDx which is one awesome amazing rom
The whole problem was with Windows 7
After extensive googling, I came across information that Windows 7 compatibility has issues with USB Debugging drivers
Had to set restrictions within Windows and then force install specified drivers
I used Flashtool with admin rights and first tried to flash a whole .ftf but did not succeed
The only .ftf that flashed was the E10_nAa-08_2.6.29.6-nAa-08.ftf
but that only includes a kernel and loader (but which helped me to be able to enter recovery
This is where i copied the Gingerdx.zip file on my SD card and tried to install
Did not work thou,baseband issue like before
So I took a chance,went back to Flashtool and tried to flash another .ftf file
2 of them failed due to the USB debugging issue. I un-installed the USB driver from computer manager,set Flashtool to only install baseband files and then hooked my phone up in flashmode plugged it in and wola,the driver like before installed (correct one for flash and not mass storage)
Thus from here did the whole .ftf flash and then in recovery mode installed the GingerDx.zip which worked now due to the baseband being correct
Thank you coffee,screw you Windows 7 (PS : also being 64bit)
And thank you for one awesome O/S stelios97
Sir I have encountered problem like yours, but with SE WT19i Live,
Please Elaborate this one..
Flashtool to only install baseband files and then hooked my phone up in flashmode plugged it in and wola,the driver like before installed (correct one for flash and not mass storage)
Related
I Bricked my x10 earlier, so i tried using the flashtool to sort it out but it wont flash it because USB Debugging isnt on and i cant turn it on (because it just stops booting at the SE boot logo)? i do really think ive bricked it this time ? does anyone know how to flash it with out USB debugging on ?
minipotts said:
I Bricked my x10 earlier, so i tried using the flashtool to sort it out but it wont flash it because USB Debugging isnt on and i cant turn it on (because it just stops booting at the SE boot logo)? i do really think ive bricked it this time ? does anyone know how to flash it with out USB debugging on ?
Click to expand...
Click to collapse
the actual flash process does not require usb debugging on, as long as the phone enters flashmode(hold back and then insert usb cable) the flash shud work, when the phone turns on and has been setup then u shud do as flashtool says and tick usb debugging on
so just to reiterate, open flashtool, press flash select ur desired firmware, press flash, flashtool prompts u to enter flashmode(hold back button then insert usb), flash will automatically begin, once flash is complete unplug usb turn phone on, wait till its booted up and gone thru setup NOW u can selct usb debugging and unknown sources
Hi,
i have the same problem here, it's been a week since i started trying to flash this bloody X10a. Still no success, i can't even turn it on! Everytime i try flashing, i get this:
20/006/2011 16:06:55 - ERROR - (X10flash.java:260) - Error flashing. Aborted
20/006/2011 16:06:55 - INFO - (FlasherGUI.java:826) - Now unplug the device and power it on
20/006/2011 16:06:55 - INFO - (FlasherGUI.java:827) - Then go to application settings
20/006/2011 16:06:55 - INFO - (FlasherGUI.java:828) - turn on Unknown Sources and Debugging
So, my question is: Is it possible to turn on Unknown Sources and Debugging with a phone that won't do anything else than get into flashmode after 20-30 minutes of USB Charging and back button holding. The phone won't charge the battery either.
C'mon guys..no matter what is up with your phone you can repair it with pccompanion....
gregbradley said:
C'mon guys..no matter what is up with your phone you can repair it with pccompanion....
Click to expand...
Click to collapse
I tried PC Companion and SEUS, i tried to do it with another computer but still..!
i am now trying yo do it under Ubuntu, wish me luck..
PC companion is only solution guys,connect ur phone and repair..
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
tlkh said:
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
Click to expand...
Click to collapse
Repair it using PCCompanion
Adding to that, you may also find it easier to do it on a windows-based pc.
This is caused by did the full wipe and then reboot the phone. At this time, there is no system files in the phone so it won't boot. Need to repair using PC Companion or SEUS or Flash Tool.
Sent from Xperia X10 Self-modded
Hi,I am this friend who cleverly full wiped with xRecovery.However, my windows7 computer still cant detect my phone,and proves to be a problem.Anyone can help me by giving me a step by step in getting my phone back into flashable mode? or help fix this?
Same kind of problem here with a friend's phone I usualy use a htc desire.
He updated hi X10i (stock, not rooted), since then there's no boot, only exclamation mark for a few secs, and no usb.
I tried "<="+usb/power on -> exclamation mark, no recovery.
It's not detected in any way by my pc (installed sony tools etc...), windows or linux (no kernel message at all), same usb port, same cable, my htc phone works in both.
What can I do ?
Thanks !
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
mugsy730 said:
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thank you, i read a little about this but i'm affraid my problem is "before" any software since my phone is not detected by my system, neither running windows 7 nor linux.
It does not turn on when pushing "<-" and pluging usb.
9andar said:
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
Click to expand...
Click to collapse
hey i tried to installed the rom you are currently using and i have my bootloader locked and when i was promted to setup the installation the touch on my phone was not responding and it seems that i just clicked on next and also appears that because of that my phone not is just stuck at logo, hope you can give a tip on how to instal this rom
I've flashed a few different roms (trying to get around this), and i can't get flashtool (latest version, just downloaded yesterday) to recognize that my phone is in debugging mode. it flashes fine, no issues, then i disconnect, restart the phone, turn on USB debugging and allow non-market apps.
then i reconnect, and flashtool always says debugging is off, when the phone says debugging is on. i turn off the phone, and reconnect while it's booting, and i get the same result. i can flash all i want, but i can't get flashtool to root the phone, or install xrecovery.
i've searched, and can't find a solution. any ideas?
- Trying Open Flashtool with the phone connected.
- Uninstall flashtool and install an old version of the program
- if does not work, change the cable (I've had a similar problem, I bought a new cable...)
Same issue found my solution
Hey I had the exact same issue but I found a solution.
My device is SE x10i 2.3.3 Generic
What I did was accidental.
I tried the old method of routing gingerbread which was too downgrade using "X10_aZuZu_Kernel_Downgrade_Generic.ftf"
but wat I also did was extract the load & kernal from the original ftf that I used to flash my phone with in the first place and put them into their own bundle so I could restore them.
After Flashing with the aZuZu downgrade
I disconnected the phone and turned it on it was stuck at the load screen where it says Sony Ericsson so I connected it again and my pc started downloading drivers.
But I installed the SEMC USB driver in the first place so I was wounder wth was goin on.
It turns out that in order for this to run smoothly you must make sure ALL DRIVERS are installed I personnally thought there was only one driver lol.
So you need to download the SEMC MASS STORAGE driver and 2 others (can't remember the names) perhaps the easiest way would be to just install the latest pc companion not sure but anyways this worked for me.
hope this helps
Hello,
i got a little Problem with my X10 (2.3.3 - rooted) and my Notebook (Acer - Win 7 64 bit).
I tried all ways to install the driver to use USB-Debugging but it won't install. The Device-Manager still tells me SEMC USB as unknown
I tried the usual way, start the phone with holding 'back', install the drivers manually...
Are there any other ways to get it working ?
Same goes for me,
Device manager states that the device is unknown, flashtool not working, PC companion no hope (connected to different USB ports including those of the motherboard).
it used to work but no chance now.
it charges normally from the USB (Orange LED) but would not connect to the PC.
Details:
Windows 7 x64
Gigabyte X58A-UD3R
Bootloader Unlocked Xperia X10 with 2.3.3 ROM and Doom's Kernel (the latest one)
The guy here says it is related to either windows windows update or faulty cable
http://android.modaco.com/topic/347751-flash-mode-not-working/
Didn't help...
But installing PC Companion did it
PC Companion install drivers automaticlly,that is the best solution.
RQ-1 said:
Didn't help...
But installing PC Companion did it
Click to expand...
Click to collapse
Sent from my xperia "z10i"
I tried removing and installing PC Companion but it didn't work either.
Any help guys?
Changing the computer had no effect as well
You must install SEUS ( Sony Ericsson Update Service ). Only SEUS will install right driver. Problem with SEUS is that when you look on SE official site, they tell you that SEUS for X10 no longer persist, and they guide you to PC companion which is crap.
Try this: try to connect your phone with PC, in flash mode. PC will try to install your phone driver but it can't find it. Then in Action Centar, on PC, (a small flag in sys tray, right down corner of a screen) find solution for this problem, and windows will automatically find SEUS over net. Install and enjoy.
from X10i via XDA premium
tried that but no luck as well (even in flash mode SEUS can not detect the device)
Thank you
hello i found a way and it worked for me download flash tool and extract it look for a folder called drivers in there u will find something called ggsetup-2.2.0.10
run this install it and all done
@huzi7868 thank you for your help
However, that didn't succeed and I reinstalled windows and drivers again, but still not working
Even no luck when the phone is in flashmode
Just tried it on a third Computer and checked the cable but the cable is working on another HTC Desire but not on my Xperia X10 (I mean my X10 cable), however they are both charging
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
a.monteiro said:
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
Click to expand...
Click to collapse
I agree, I also have solved in this way.
Download the latest version of Flashtool and after installing it you will find in the "drivers" folder the file "Flashtool-Drivers.exe".
Run it and select the drivers you need. Then connect again your Xperia X10
I really appreciate your help, but I had done that 3 times and on different computers but "USB Device not recognized"
As I sad before, use SEUS to install SEMC USB DRIVER. I have win 7 64bit, and I install driver on it. First, install Update service. When its finished, start Update Service and follow instruction (check "Licence Agree" button, and click next, then pick your phone, X10i I suppose, be carefull there is two X10, One is X10, and other is X10 SO-01b. I pick X10 for myself, and press NEXT. Turn off your phone, press and hold BACK button on phone while connecting with PC via USB. HOLD till you see message to release BACK button. Till then your driver will be installed.
Download SEUS from here http://www.megaupload.com/?d=SBDVZ3DG
@Dzufa Thank you, but I had done that before and tried it again, whenever I connect the phone pressing the back button the green LED illuminates and "USB device is not recognized" appears and nothing happen after that, SEUS just behaves like nothing is connected.
Try with this one. And I think you must be online, because SEUS must download some files.
I really did that and of course updated SEUS, as I said green LED illuminates and nothing happens even in flash tool (it used to work for ages but suddenly it stopped, it only charges)
BTW, I had flashed many kernels and ROMs before it happened so I am quite familiar with flashtool and SEUS, I unlocked the bootloader using 9lucas method and it worked after that I installed XSP ROM and the USB worked as well, however after 2 weeks or so, one day I left it connected it to the PC and I found that the phone turned off and refused to power on, I left it for a while in the charger then powered it on and it powered on, then it has refused to connect to the PC through USB since then.
Hi, can anybody help me. I just flashed my locked bootloader x10i with Feralab kernel- [LB]FeraKernel-v15.1-GB just like it instructed ( at this point it is still fine).Then i flashed the Feralab rom -FeraLab_v30.5_Final through CWM ,After that, i try to reboot it ,but the phone just stuck at the sony ericsson text .
When i want to flash it back to stock with flashtool, it wont detect my phone ,it say error , flashing aborted .When i try to flash it to stock with Flashtool 0,291 , it says ERROR - USB\VID_0FCE&PID_ADDE\5&1E642C5D&0&1 and my computer says USB DEVICE CANT BE RECOGNIZED ,I think this is driver related problem cause when I check through Device Manager , I can see a yellow warning mark beside
SEMC Flash Device(it says "A request for the USB BOS descriptor failed." ) and USB Mass Storage Device .I already reinstall PC companion in my windows 8 computer but the problem still persist.
Can anyone help me with this , I mean i cant even get it into flash mode after doing the pressing back while connecting the USB thing to flash it back to stock.
pulldtrigger said:
Hi, can anybody help me. I just flashed my locked bootloader x10i with Feralab kernel- [LB]FeraKernel-v15.1-GB just like it instructed ( at this point it is still fine).Then i flashed the Feralab rom -FeraLab_v30.5_Final through CWM ,After that, i try to reboot it ,but the phone just stuck at the sony ericsson text .
When i want to flash it back to stock with flashtool, it wont detect my phone ,it say error , flashing aborted .When i try to flash it to stock with Flashtool 0,291 , it says ERROR - USB\VID_0FCE&PID_ADDE\5&1E642C5D&0&1 and my computer says USB DEVICE CANT BE RECOGNIZED ,I think this is driver related problem cause when I check through Device Manager , I can see a yellow warning mark beside
SEMC Flash Device(it says "A request for the USB BOS descriptor failed." ) and USB Mass Storage Device .I already reinstall PC companion in my windows 8 computer but the problem still persist.
Can anyone help me with this , I mean i cant even get it into flash mode after doing the pressing back while connecting the USB thing to flash it back to stock.
Click to expand...
Click to collapse
The bootloader should be unlocked first if am not wrong.
ronaksworld said:
The bootloader should be unlocked first if am not wrong.
Click to expand...
Click to collapse
Really , well I thought you can flash Feralab even on locked bootloader Well I guess I get that part wrong . Do you have any idea how to fix the problem above
Solved!
Well guess what , I finally able to flash my phone. First, I detect the all the driver that related with x10i and uninstall its driver completely. Then, I install the driver by disabling driver signature enforcement in windows 8.After that , the usual flashing to stock.
pulldtrigger said:
Well guess what , I finally able to flash my phone. First, I detect the all the driver that related with x10i and uninstall its driver completely. Then, I install the driver by disabling driver signature enforcement in windows 8.After that , the usual flashing to stock.
Click to expand...
Click to collapse
Maybe ask someone in ***FeraLab*** Official - Break The Limits. threat?
http://forum.xda-developers.com/showthread.php?t=1458001
as even am new around here i would suggest you to make at least 10 post then u can visit the above link and ask for help in that threat.
as you said the boot loader was locked and the flashing failed and you are stuck at sony erricson screen, i think you can use Sony PC Suite and restore it to factory (consult someone else too or search in the forums),
BLU in the Flash Tool is the one you should use first to Unlock bootloader, before that backup the device,
Advance\Trim Area\S1 and Raw Device., i did both the methods and i didnt knew what was the best
This [ROM] AOSP JB 4.2.2 - Unlock Bootloader Only, is the one i used and works perfectly fine on my xperia x10i :victory:
http://forum.xda-developers.com/showthread.php?t=2197387