Note: Closed. Problem solved by flashing newer version of country radio.
Hey guys,
I am running PA 4.4Final with the stock kernel. The radio was working perfectly fine for 2 hours on roaming, but then randomly stopped working for the past 2 days. I am now back on my home city network and the issue remains.
The cell phone is receiving a healthy signal and even identifying available networks. But for some reason, any manually selected network isn't "available", and if I keep the setting to automatic selection, I get only emergency calls status. The service status is also "out of service" ?!
I'm attaching thumbnails for your benefit. WiFi and other wireless services are working fine. Is this a Samsung problem, or a software one?
Partial fix: I flashed the new Indian modem. Now I am getting signal and network. But I cannot hear anything on calls. =/
Related
Hello,
I installed then new ROM 2.11.255.1 on an English TyTN. Now it shows a specific icon when it's connected thru GPRS, EDGE, 3G or HSDPA, and it's cool.
Well, I noticed that when it's connected to data network and it shows the H icon of HSDPA, any attempt to make a phone call fails.
The issue appears also if the device is connected but it's not transmitting or receiving data.
Disconnecting the data connection fixes the problem, making me able to make phone calls again, but this is not a workaround when Direct Push is enabled, because when I disconnect the data connection it tries to immediately reconnect...
Does anybody has the same issue?
My provider is Telecom Italia Mobile.
Thanks!
Hi!
I have the same issue! this is extremely annoying, and sofar i dont know any workaround then to turn off push and disconnect the data session. In hoping the official WM6 rom with its upgrades will take care of this issue...
In Holland a similar problem was found by several users. It turned out to be a problem of the service provider (KPN), some problems with their hardware. The issue should be fixed later this year. You should check if more customers of the service provider have the same issues, as it might not be your phone or rom version that causes the problems.
Depends of you network ...its nothing related with your phone or radio version. Just disable hspda.
Hi all,
I've got a problem and can't get my head around it!
I upgraded to the offical Tmobile (UK) WM6, and whilst I love it (much more stable) I just can not connect to the Web 'n' Walk service via 3G. I have no problems on GPRS, and I have no problems with texting and making calls on 3G. Can anyone offer any help?
I've tried all the operator settings available from this group, but haven't tried a different radio rom yet - I'm still on 1.50.
Another thing I have noticed is that if someone sends me a MMS, I get a pop up box saying I have to close the current connection and then download it. This didn't happen before on WM5. If I go back on the net after downloading a MMS, then I get the "connecting" pop up showing again.
Any help much appreciated!
Regards,
Towser
I sort of had this same problem with 3G
I upgraded to Schap's 4.31 with 1.50 radio. At first it worked fine at my home address. About a month ago reception started to get really bad i was getting text messages and calls only when i left the area. I phoned T-mobile and they said that there were no problems in the area. Connecting via GPRS was fine but 3G messed up my phone. After a trip to Hertford and then back home (Leicester) my phone has started working properly again.
Try T-Mobile and see what they say.
BTW i'm using Radio 1.47 as recommended by mrvanx
I have T-Mobile version of this phone but I use it with Mobilicity.
Any time I go into a place that has no reception I obviously lose signal and both the bars and the 3G icon disappear.
However, when I leave that area and come back to the area where I had reception, the 3G icon never comes back. When I attempt to make a call I a get a message saying "not registered on network". If i go to wireless settings and try to manually search for a provider, the phone will only find Roaming.
The only thing that solves the problem is rebooting the phone.
I have Bionix 1.9 rom but this issue happened on stock as well. It also happens to another guy that has Vibrant9 rom.
On the other hand, other phones like the old samsung galaxy doesn't have that issue.
Any ideas. Am I missing some settings option?
Thanks...
I can only tell you I have exactly the same problem. Using it with Mobilicity.
Let's hope someone will come up with a fix.
A guess is that it has to do with the order in which it is searching to network operators after it loses signal. I am not sure how the phone is hard coded, but it is possible that upon reboot, it checks the SIM for which network to lock on to, but without a reboot it is looking for T-Mobile, because that is hard coded into the phone.
This is all a guess, but perhaps setting it to Manual network selection instead of automatic would help lock it on your network.
^yes, I think if you take it off the auto setting in your mobile network, that may solve the problem. Even though I'm with TMO we had a 3g outage and while it was on auto the same message came up for me, even after the outage was over. Set it to wcdma only, and I was able to make calls and get back on the network.
Setting it to Manual will just force us to do it manually every time it gets disconnected.
Not a solution, unfortunately.
Thanks guys,
Is there an application perhaps that will search for available networks and register on the network of your choosing once found?
Orochi77 said:
I have T-Mobile version of this phone but I use it with Mobilicity.
Any time I go into a place that has no reception I obviously lose signal and both the bars and the 3G icon disappear.
However, when I leave that area and come back to the area where I had reception, the 3G icon never comes back. When I attempt to make a call I a get a message saying "not registered on network". If i go to wireless settings and try to manually search for a provider, the phone will only find Roaming.
The only thing that solves the problem is rebooting the phone.
I have Bionix 1.9 rom but this issue happened on stock as well. It also happens to another guy that has Vibrant9 rom.
On the other hand, other phones like the old samsung galaxy doesn't have that issue.
Any ideas. Am I missing some settings option?
Thanks...
Click to expand...
Click to collapse
Where you able to find a solution to this problem? I'm having the same problem. Let me know. Thanks.
+1111111.... i meant plus 1... but yeah ...i'm having the same problem... Vibrant on Mobilicity w/ Froyo Rom from Axurus <-- i think thats how u spell it
Anyways, this happends while im at home, sitting on the same chair as i was when i had the 3G...and then boom..............3g just disappears and doesn't come back til' i restart....
Have you tried setting the mobile network to "WCDMA Only" ?
Mobilicity doesnt have a GSM network.
ive been using the phone for a few weeks now and it was fine until today, i cant connect to the internet via edge . ive tweaked with all the settings but nothing seems to work. everything else is fine . ie i can make calls and send text's but i cant connect to the internet. i checked under the status and it shows the mobile network state is disconnected. i have no clue as to wat this is since im new to android.
pls help!
Have you turned MOBILE DATA off via the power on/off menu .
jje
ive checked that too.
Go to Settings- Wireless and Network- Mobile Networks- Access Point Names and see if the APN is ticked or not or the correct APN is ticked.
everything is back to normal again,it connected to the internet, by itself . must be a random bug in the os
problem solved. peace
I have experienced the same thing with my phone, except that it shows "activated". After a while it just started working again.
I've had the phone for a couple of months now and everything has worked fine till now, a little bugs here and there but no issues. A few weeks back (on android 2.3.3) I was unable to make or receive calls, but surprisingly was able to make text messages. I tried everything, turning flight mode on/off; the phone on/off; etc. I was on the verge of contacting Samsung but then suddenly the thing started working once I came back home from the office.
There has been no problems till then but today suddenly (now on android 2.3.6) the outgoing calls no longer work, same for outgoing text message; but I still get incoming calls and messages.
Just to be sure that this wasn't a SIM or service issue, I tried changing SIM's (different SIM did not work on the phone) and used my SIM on different phone (where it worked).
Also 3G doesn't work as well, but connection here is spotty so I wouldn't trust that. The only message I see different on the 'About Phone' tab is 'Mobile State-Disconnected'. I have full signal strength and all that.
My thoughts are that it was, or rather is a phone specific issue and would appreciate someone else's thoughts on the matter. As to my problem I assume it will sort itself out in a little while.
FYI: Samsung Galaxy S2; Android 2.3.6; NOT rooted; Indian version; On Airtel Mobile Network.
Mobile network state disconnected.
Hi guys, I have the same problem with my network connection also my 3g does not work anymore, I`m play with some secret codes like a ##72786# on my epic 4g touch sprint phone flashed to metro pcs and now I have no 3G service. In the setting menu under network status say Sprint. How can I get my 3g back?. The mobile net. 3G is on and the wifi is off. I need to change the network to metro pcs in the status setting and how can do that? Thanks for your help and sorry for my bad English.
I picked up an unlocked TMo One in New York last week. I used it there with my Norwegian SIM with no problems.
Back home, I get "No Service" using the exact same SIM-card. Using the *#*#INFO#*#*-menu, I can see the SIM-card is recognised because it displays my carrier in the "Current Network" field. I am suspecting the TMo-infused Sense OS to reject my card, since to my understanding the phone is compatible with EU networks. Will i be fine if i flash another ROM, like the stock GPe, and get rid of the TMo-stuff altogheter, or is there another rock in the road here?
I used my Tmobile HTC One with the stock ROM in Norway using a Telenor SIM and in Greece using a Vodafone SIM.
I would make sure you have the proper APN info (I can't remember the appropriate one for the Norwegian carriers). I believe it should work without issues (mine did). If it worked with that SIM card already, it's not locked and it's not rejecting it.
Also, I found that when I returned home to the US, I had to choose Settings -> Mobile Data -> Network Operators and choose Select Automatically (even though it was already chosen). Maybe you need to do that too.
Currently I am running Android Revolution and that also works fine with my Norwegian and TMOUS SIM cards.
Good luck!
Thanks! I've at least made some progress. I tried setting Network Selection to automatic, and got reception, however only for about half a minute. I then tried adding my provider's APN info. This has given me permanent data connection, but still no GSM reception for texts and phone calls. I do get 2g data when in low coverage areas. I am finding this weird. Can anyone shed some light?
Okay. Just wanted to post my latest findings - if others are experiencing the same issue. I've flashed the latest Google Edition RUU, to see if the TMo ROM was causing it. But i still don't get GSM coverage. Data still connected on both 2G and 3G (haven't been within 4G coverage yet..)
When flashing I also updated firmware to latest.
Phone info says Current network: "NetCom" (my home network) GSM service: "Emergency Calls only" (I tested this, and I am able to place the call to emergency services) and GPRS service: "Connected" (I am typing this on my data connection via WiFi-tethering, actually)
The status menu shows this: Service state "Out of service" and My phone number "Unknown".
If anyone can come up with a theory, I am all ears..
laberkis said:
Okay. Just wanted to post my latest findings - if others are experiencing the same issue. I've flashed the latest Google Edition RUU, to see if the TMo ROM was causing it. But i still don't get GSM coverage. Data still connected on both 2G and 3G (haven't been within 4G coverage yet..)
When flashing I also updated firmware to latest.
Phone info says Current network: "NetCom" (my home network) GSM service: "Emergency Calls only" (I tested this, and I am able to place the call to emergency services) and GPRS service: "Connected" (I am typing this on my data connection via WiFi-tethering, actually)
The status menu shows this: Service state "Out of service" and My phone number "Unknown".
If anyone can come up with a theory, I am all ears..
Click to expand...
Click to collapse
Have you tried taking the phone to your provider? Maybe you need an update which or setting which they can provide.
I find it strange that it wouldn't recognize your phone number, usually that's a sign of some type of incompatibility with the phone and the network.
Sent from my HTC One using Tapatalk 2
I have contacted my provider to see if there's anything they can do. But they're playing a little hard to get.. I was afraid there would be an issue with compatibility at first, by since my data connection is all right, I'm not so sure. Also erdelyt above here says he has used the TMo phone in Norway without trouble. He has another provider, however. They run their own network, so I will be trying with one of their SIM cards next, if my provider NetCom aren't of any help. Thanks for your help so far. I'll be posting my findings further!
So, I got to try a Telenor SIM card the other day, and the issue is still there. Although, with that card the phone number was read and displayed in the phone info menu. The owner of the card suggested there was an unlock issue - but I did make calls with my phone and SIM card in the US, so I don't see how that could be.
So that's a small step further, but now I just have to wait to see what my carrier says..
I changed the title for this thread after my findings.. I got a new SIM-card for my carrier, and i got coverage to make one phone call, but after i hung up, it was gone. I am really in the dark here.. It can of course be a hardware fault, but that's a bit strange for an entirely new product..