Good evening friends...
I am newbie in this forum....
I have rooted Karbonn A1+ Mobile.
Last time i unistalled system application using Titaniam Backup software with "Force remove app (by recovery exploit)... option. Then my mobile was restarted and shows msg in yellow colour that failed... and do same process with that process again and again.
after that i removed my battery for 1-2 hour and insert it ... but it shows same msg and phone doent start...
Then i used "Android Multi Tools" and connect my phone with my usb. then checked my device where connected i choose Reboot option and then my phone starts.... :laugh:
After startup using "Quick Boot" or " TB" reboot option phone restarts well .. but when i use Shut down option or Restart in recovery mod it stop with yellow msg....
whenever my phone switch off or battery empty I need to connect it to pc and do process using Android Multi Tools reboot option..
Please friends help me to save my phone....
Thanks in advance.........
Related
Hi Friends,
My Karbonn A30 has bricked. I did so many experiment on my phone and also stucked several time with some problem but i did solved that problems. Unfortunately this time i am helpless with my phone.Now i am going to explain you what i did with my phone and what problem i am facing.
NOTE: My phone was rooted by using "Root_with_Restore_by_Bin4ry_v18" process.
Two days back i flashed TITAN MOBILE ROM in my Karbonn A30 but that was unsuccessful,After that my phone was not able to boot and also it was not able to boot in recovery mode using Volume up + Power key. Then with some R&D i get a new option using Volume Down + Power key that option is for my mobile hardware test. In that option i formatted my "emmc" then after my phone was able boot in CWMR recovery mode.Then i wiped my all data and system using CWM Recovery,Also did Restore factory.
After that i was regularly getting error message on my phone notification " Phone storage corrupted,Format it" Then i formatted that. Then i installed my all apps from by apps_backup. When i rebooted my phone,again i was getting same error message and didn't any option except format it.
Then i decide to check this error after unrooting my phone. So i remove root access. After that i was not getting this error.
Yesterday again i rooted it with same process and again i was getting same error message after installing apps and reboot my phone.
then i decided to flash new rom with same company phone(Karbonn). So i got ROM for Karbonn S5 from google. I flashed that successfully on my phone i was very happy because this rom was having Jellybean OS(4.1.2). But after some time apps started crashing when i logged in my phone using my gmail as usual i did after every factory reset.
Then i re-flashed the same rom(Karonn S5). This time i decided to do factory reset using phone setting before loggin in google account.
That was my blunder mistake. After pressing factory reset my phone got stuck in boot screen.
Then i tried same option to solve it (Volume down + power ) so i can format emmc again to resolve it. But this time after formatting emmc i was in the same condition on boot looping.
I am not able to go in recovery option using my phone key.
I need you help, i can not go service center because i voided my warranty.
NOTE: Currently my phone is not rooted,I checked it using ADB commands. My USB DEBUGGING is showing on but when i put my phone in" phone hardware check mode( using Volume Down + Power key)".
Plz HELP ME TO SOLVE IT.
djhot143 said:
Hi Friends,
My Karbonn A30 has bricked. I did so many experiment on my phone and also stucked several time with some problem but i did solved that problems. Unfortunately this time i am helpless with my phone.Now i am going to explain you what i did with my phone and what problem i am facing.
NOTE: My phone was rooted by using "Root_with_Restore_by_Bin4ry_v18" process.
Two days back i flashed TITAN MOBILE ROM in my Karbonn A30 but that was unsuccessful,After that my phone was not able to boot and also it was not able to boot in recovery mode using Volume up + Power key. Then with some R&D i get a new option using Volume Down + Power key that option is for my mobile hardware test. In that option i formatted my "emmc" then after my phone was able boot in CWMR recovery mode.Then i wiped my all data and system using CWM Recovery,Also did Restore factory.
After that i was regularly getting error message on my phone notification " Phone storage corrupted,Format it" Then i formatted that. Then i installed my all apps from by apps_backup. When i rebooted my phone,again i was getting same error message and didn't any option except format it.
Then i decide to check this error after unrooting my phone. So i remove root access. After that i was not getting this error.
Yesterday again i rooted it with same process and again i was getting same error message after installing apps and reboot my phone.
then i decided to flash new rom with same company phone(Karbonn). So i got ROM for Karbonn S5 from google. I flashed that successfully on my phone i was very happy because this rom was having Jellybean OS(4.1.2). But after some time apps started crashing when i logged in my phone using my gmail as usual i did after every factory reset.
Then i re-flashed the same rom(Karonn S5). This time i decided to do factory reset using phone setting before loggin in google account.
That was my blunder mistake. After pressing factory reset my phone got stuck in boot screen.
Then i tried same option to solve it (Volume down + power ) so i can format emmc again to resolve it. But this time after formatting emmc i was in the same condition on boot looping.
I am not able to go in recovery option using my phone key.
I need you help, i can not go service center because i voided my warranty.
NOTE: Currently my phone is not rooted,I checked it using ADB commands. My USB DEBUGGING is showing on but when i put my phone in" phone hardware check mode( using Volume Down + Power key)".
Plz HELP ME TO SOLVE IT.
Click to expand...
Click to collapse
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
karbon a30 unbrick
djhot143 said:
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
Click to expand...
Click to collapse
I think you need so flash tool of mtk download it and install mtk vcom drivers of your phone in PC And download twrp recovery of cherry mobile titan TV download it you need scatter loading file I can give you links of all above files and full procedure when you download twrp recovery select scatter file in so flash tool and untick all only tick recovery click on recovery and select twrp recovery when you done all things you can pull out your phone battery and disconnect USB pull out the battery some seconds and replace it and connect usb and press f9 and recovery will flash then I will give you nandroid backup okk
---------- Post added at 08:14 AM ---------- Previous post was at 08:09 AM ----------
prince khurana said:
I think you need so flash tool of mtk download it and install mtk vcom drivers of your phone in PC And download twrp recovery of cherry mobile titan TV download it you need scatter loading file I can give you links of all above files and full procedure when you download twrp recovery select scatter file in so flash tool and untick all only tick recovery click on recovery and select twrp recovery when you done all things you can pull out your phone battery and disconnect USB pull out the battery some seconds and replace it and connect usb and press f9 and recovery will flash then I will give you nandroid backup okk
Click to expand...
Click to collapse
the link of mtk drivers: forum.gsmhosting.com/vbb/f457/how-install-mtk-driver-windows-xp-vista-7-a-1662956/
signature verification problem
sir,
i also try this ROM in my karbonn a30 ..and also new 4.2 rom
but i got error message
E: signature verification failed
installation aborted.
please tell me how to solve it
my process
i rooted my mobile
power + volume up
then update rom from sd card
update....
E: signature verification failed
installation aborted.
error
plz help me
djhot143 said:
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
Click to expand...
Click to collapse
bro i have rooted my Karbonn A30.while changing the font it will restart and now its only showing boot screen plz help me what can i do??
fix
patilprashant777 said:
bro i have rooted my Karbonn A30.while changing the font it will restart and now its only showing boot screen plz help me what can i do??
Click to expand...
Click to collapse
reflash the stock rom
or do factory reset
Hi,
My phone is getting restart over and over...
The problem is I have luckily Root my phone and deleting System Galary application from Rom through Titanium Backup application... It show phone going to twice reboot to remove system application of Galary from Rom...but unfortunately on that time my phone get reboot again again...
Every time android logo show then msg showing
E: unknown volume for path [system: app\galary3D.apk]
reboot into recovery
this msg shows and reboot again n again and show this msg again until I removed battery from phone..
and when I insert battery again then this reboot process come and happen again...
its also not going in recovery mode...
Is anyone here to solve my problem...Its Great appreciation for Android Lovers n Users.
Thanks in advance....
Hey guys
The problem is that whenever i turn on the tablet it turns on and stuck on the boot logo which the brand name of this tablet and never skip through it , as i tried to enter the recovery mode by pressing the combination keys but no succeed , used "Android multi tool " software , connected the tablet to the PC and tried to use the software but it says that there is no device connected and the device manager has identified it as "Android ADB Interface" , i have searched a lot about "entering the recovery mode" for this brand everywhere but with no luck :crying:
it's brand "Compu Tab BY-7071" but seems to be unknown brand unfortunately, so i managed to open the back cover and to get the CPU's brand , it's "Allwinner Tech A23" and i attached some images below.
i have tried almost everything but with no luck !
is there any way left to restore this dead tablet ?
maybe if i try to disconnect the battery from the circuit board for a while to discharge will work ?
by the way the problem started when i rebooted the tablet into the Boot Loader from the TWRP app i have it installed from the google play store .
Please guys help me , Thanks very much
love XDA-Developers
so it goes like this .. I had a problem with my z90a40 as I was trying to fix a problem with network services(phone was able to recognize the sim but there was no service).. first I did a factory reset- didn't work, then I entered the boot menu again and wiped user data, then I choose "restore QCN backup" option , after that I rebooted, phone entered this initializing statues and after 2 seconds it rebooted(doesn't even finish the initializing, actually it only ticks at maybe less than 5% and then reboot) , and kept doing that, after this, I could no longer enter the boot menu ... I tried everything, ADB or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .. what should I do now ?
thanks in advance & sorry for bad English
same problem
axiom913 said:
so it goes like this .. I had a problem with my z90a40 as I was trying to fix a problem with network services(phone was able to recognize the sim but there was no service).. first I did a factory reset- didn't work, then I entered the boot menu again and wiped user data, then I choose "restore QCN backup" option , after that I rebooted, phone entered this initializing statues and after 2 seconds it rebooted(doesn't even finish the initializing, actually it only ticks at maybe less than 5% and then reboot) , and kept doing that, after this, I could no longer enter the boot menu ... I tried everything, ADB or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .. what should I do now ?
thanks in advance & sorry for bad English
Click to expand...
Click to collapse
1st was the network data, tried reset and then CQN restore on black menu. now just keep on rebooting with lenovo logo initializing at 2-5% then loop restart again...
now cannot access the black menu (vol down + power)
stuck on rebooting phone any fix?
I bought swipe elite plus today ..
And when I power up
With "power key + valume key"
Now its won't open
After swipe logo its stuck in blinking clear black display
Please help me
Im facing the same issue.
Please let me know if you were able to fix it.
I had yhe USB debug mode off when my phone crashed. The recovery is also corrupt. Nothing hets displayed after Volume up + power.
Phone is not detected by the computer, so cant use QF
Swipe Elite Plus Fully Wiped "No OS" Stuck on Swipe Logo
As for now reaching every corner of my no OS issue I can Quote sure problem happend to my device.
I really want to explain everything how it happed. Firstly
1.I bought Swipe Elite Plus 2 monts back, everything was fine but then suddenly after one week using at the mornig time I see Phone shutting down after every 2 to 4 min.
2. When I head to settings "about phone" phone backs to home screen if I swipe to and fro 5 to 6 time device switch offs' .
So wasn't stepping towards flashing .... before flashing what I did was
1. reset.. then hard reset... switch off hold volume + and Power button bootloader hardreset. Evrything done but the result was same (hangs /switch off).
2. In recovery mode i can see 9 times reset logs.. gave up..then
I googled for stock rom... I could not find for first 1 month or two until now...
3. Then I downloaded stock rom for this device (Swipe Elite Plus) found from previously posted swipe forums links (google drive), Drivers, Tools, and Stock Rom...everything.
4. But I get... sahara Fail...this is not possible with Sahara protocol..
#
# Tried several times.. changing ports...Qualcom driver installation.... everything was right (doubted driver problem ~but tried everything/manual port driver update to Qualcom.... QLoader 9008)...
# But sahara Fail.... Cannot procced with sahara protocol....
---------------------
Read forum.... thought to root....rooted with iroot(not sure rooted or not rooted) however TWRP flashed... and wiped everthing now no OS....
# No way to connect to pc. I can hear connection (sound) when i plug in usb to phone then phone switch on and stuck on swipe elite plus logo..
# however I can enter to TWRP recovery by volum up + power button...and When I go to "power off" from reboot option in TWRP phone offs' then on again and stuck on swipe logo, while usb cable is still connected and I can hear connection sound but no signs (nothing) of device at "Device Manager"....
#Can I have any ROM/CM to flash from internal memory as I can still access Internal storage (through PC) in TWRP mode and rooted...??.I will try...
#Do I need convert emax mini/ TCL M3G ..?? But no way to usb connecion??? only sound...( I am Using win7 32bit)
Any Links to flash file plz....????
My swipe elite plus wont boot
Well.. somehow I have QFIL flashed the TCL M3G rom following the UMI forum tutorial..
But I can not restore QCN backup (Downloaded from given link 216kb) bcz.. Port is not Showing 9091 com port.... When I go to QFIL>>Tools tab>>backup /restore>> then select the downloaded QCN file then backup and restore button is inactive...I know it bcz of com Port ....QDoader 9008(COMxx)...
# But then If I try to Switch on it Stuck on Small Linux logo (No more Swipe Elite Plus/phone changed to TCL M3G)...And sometimes Loads big "Android" Logo for 1 or 2 then shuts down and nothing happens.... I can boot to bootloader....TWRP is Gone...
# I did try to flash the stock rom found at aplush.xyz but this time it is again Sahara Fail...Sahara..Fail...
What Can I do...??? :fingers-crossed::fingers-crossed::fingers-crossed:
anuragkumar19 said:
I bought swipe elite plus today ..
And when I power up
With "power key + valume key"
Now its won't open
After swipe logo its stuck in blinking clear black display
Please help me
Click to expand...
Click to collapse
I am also facing same problem
This happened everytime whenever i tried to hard reset
May be flashing custom rom will help
Bt im afraid if while processing it may cause the same problem
problem of swipe elite plus hang on logo and screen blinks
guys first tell me if your phone is rooted or not
if your phone is not rooted then try the below steps
download swipe elite plus firmware
download android usb driver
download qualcomm driver
download QPST
move the swipe elite plus firmware to the following path:-my computer/local disc(C)/program files/qualcomm/QPST/bin
then you will not encounter sahara error
now press and hold volume+ and volume- button at atime and connect usb cable simultaneosly
you will entert diwnload mode
now provide qualcumm driver path and open QPST AND flash your firmware
enjoy
I rooted my swipe elite plus with Kingroot and uninstalled some system apps and also apps provided bt swipe.....Then..there was no problems and i've restarted several times after i rooted and uninstalled the system apps...but when i uninstall Kingroot (unroot) Then my phone got stuck on Swipe logo ...I tried hardreset (volumup+power) But didt work again stuck at the logo..What Can i do please help
from ,
jahir ali abbas
pallapatti karur district tamilnadu.
To,
swipe elite plus MD
swipe mobile
unrespected sir,
this is a worst mobile i have ever had. bakwas mobile. china company. not booting whats the solution u fellows.
"download fail firehorse fail fail to load qdloader port after switch" plz help.
"download fail firehorse fail fail to load qdloader port after switch" plz help.
---------- Post added at 12:03 PM ---------- Previous post was at 11:52 AM ----------
"download fail firehorse fail fail to load qdloader port after switch" plz help.
Swipe elite plus blank screen even after successful flash with stock rom
My swipe elite plus show blank black screen, even after several times flashing with stock rom... What should i do... When i use ADB commands, it shows null device. Kindly help me..
... I also tried it to flash with videocon v502830 rom.. But after 36% completion, it shows nprg error.. Or 5002...but phone status appears to be rooted while this flash.
Have you tried going "NUCLEAR" Android=>> ♧♧♧ !!!
IDK if code works on iOS, other OS. After W 8.1, I went in 2010 to 2.2 -> 8.1 now on Pixel 2(loved it, native OS w/No bloat like Samsung & never went back -> Android/Chrome). Code as follows.
*2767*3855#
It's a complete wiping of your mobile also it reinstalls the phones firmware(in XDA forum). "Work for me with 'normal' FRR or HR -> 'no joy' or for non-military means 'nothing' -> Mech Engr/CS B.S. degrees. If you are ~XDA, your risk, ask the Mods or leads for XDA if my suggestion is ok"!