so it goes like this .. I had a problem with my z90a40 as I was trying to fix a problem with network services(phone was able to recognize the sim but there was no service).. first I did a factory reset- didn't work, then I entered the boot menu again and wiped user data, then I choose "restore QCN backup" option , after that I rebooted, phone entered this initializing statues and after 2 seconds it rebooted(doesn't even finish the initializing, actually it only ticks at maybe less than 5% and then reboot) , and kept doing that, after this, I could no longer enter the boot menu ... I tried everything, ADB or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .. what should I do now ?
thanks in advance & sorry for bad English
same problem
axiom913 said:
so it goes like this .. I had a problem with my z90a40 as I was trying to fix a problem with network services(phone was able to recognize the sim but there was no service).. first I did a factory reset- didn't work, then I entered the boot menu again and wiped user data, then I choose "restore QCN backup" option , after that I rebooted, phone entered this initializing statues and after 2 seconds it rebooted(doesn't even finish the initializing, actually it only ticks at maybe less than 5% and then reboot) , and kept doing that, after this, I could no longer enter the boot menu ... I tried everything, ADB or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .. what should I do now ?
thanks in advance & sorry for bad English
Click to expand...
Click to collapse
1st was the network data, tried reset and then CQN restore on black menu. now just keep on rebooting with lenovo logo initializing at 2-5% then loop restart again...
now cannot access the black menu (vol down + power)
stuck on rebooting phone any fix?
Related
Hi,
Please give me some help guys,
After installing an app from a torrent (dont know if its related but it happened after installing and opening it) my phone keeps restarting every time, it boots up normally but after just about 5 seconds in the home screen it reboots again. I need to pull out battery to get it stop rebooting.
I've entered in CWM, but cant wipe data/factory reset, when I choose that option it appears "wipping /data" and it just reboots again. I cant also format /data from advanced options. Also, when /data is mounted I cant unmount it also from advanced options. Can wipe cache and dalvik cache but not data. Cant use the phone!
I have Omega v36 with superSU and CWM touch in it. How can I solve this?
Happened to me once also. Idk which app you installed but I had installed privacy guard and it resulted in a boot loop. The 5 seconds it gives you at start, try to go in settings then applications and uninstall the app which caused this. Took 15 minutes of me trying and I lucked out and uninstalled it. Phone been fine after that
Sent by GT-I9300 SuperNexus
omgbuffguy said:
Happened to me once also. Idk which app you installed but I had installed privacy guard and it resulted in a boot loop. The 5 seconds it gives you at start, try to go in settings then applications and uninstall the app which caused this. Took 15 minutes of me trying and I lucked out and uninstalled it. Phone been fine after that
Sent by GT-I9300 SuperNexus
Click to expand...
Click to collapse
I've tried, but as soon as I hit the "unninstall" the phone reboots. I guess trying to interact with something in /data makes it reboot.
App + torrent = probable malware .
Flash stock rom via Odin is the first step .
jje
joaodrp said:
Hi,
Please give me some help guys,
After installing an app from a torrent (dont know if its related but it happened after installing and opening it) my phone keeps restarting every time, it boots up normally but after just about 5 seconds in the home screen it reboots again. I need to pull out battery to get it stop rebooting.
I've entered in CWM, but cant wipe data/factory reset, when I choose that option it appears "wipping /data" and it just reboots again. I cant also format /data from advanced options. Also, when /data is mounted I cant unmount it also from advanced options. Can wipe cache and dalvik cache but not data. Cant use the phone!
I have Omega v36 with superSU and CWM touch in it. How can I solve this?
Click to expand...
Click to collapse
flash latest i9300 stock rom via odin and after f-reset.find rom here
http://www.sammobile.com/firmware/?page=3
Try safe mode.
Safe mode will boot only stock apps, apps which were installed by ROM.
http://forum.xda-developers.com/showthread.php?t=1821557
Well, things have gone worst, i've entered in safe mode and choose factory reset from settings, now the phone keeps rebooting, show the green robot of factory reset for 2 seconds and then reboots again. Now cant even get in the samsung logo neither in recovery or download mode.
Now, is there a solution for this? Have removed the battery for about 5 minuts but it stays the same.
joaodrp said:
Well, things have gone worst, i've entered in safe mode and choose factory reset from settings, now the phone keeps rebooting, show the green robot of factory reset for 2 seconds and then reboots again. Now cant even get in the samsung logo neither in recovery or download mode.
Now, is there a solution for this? Have removed the battery for about 5 minuts but it stays the same.
Click to expand...
Click to collapse
flase stock recovery via odin after that f-reset, may its help u. find attachment.
JJEgan said:
App + torrent = probable malware .
Flash stock rom via Odin is the first step .
jje
Click to expand...
Click to collapse
Thanks, I've solved the problem!
I had the same problem but finally fixed because this thread ,thank god
My problem fixed by :
1- enter download mode - connect ur phone to pc via original usb cable , open odin
2- flash The Stock recovery with Odin 3.4 in PDA button
3- Enter your stock recovery to wipe everything " data / cache/ dalvik " .
4- now enter again download mode and connect the phone again to pc .
5- flash the Stock Rom through PDA button and leave all checks as it is
6- after finishing it will reboot by it self to find your phone back to life again
7- Enjoy
I am going crazy!
ddaveid said:
Try safe mode.
Safe mode will boot only stock apps, apps which were installed by ROM.
http://forum.xda-developers.com/showthread.php?t=1821557
Click to expand...
Click to collapse
I am having this same problem with my ACE 3 Duos, and it is DRIVING ME NUTS!
I searched all over the internet
- It starts up normally then reboots within 2 - 4 seconds
- I managed to let it start on SAFE MODE it didn't work! still rebooting!
- I wiped the cache and it didn't work
- I am leaving the Factory Reset as a last option ((cause I didn't back up my data and I have bad experience with back ups))
- much important info on my phone ((about my work)) and don't wanna lose that
- I think I can save it cause it is booting normally then something goes wrong
HELP!
Dear community,
After the use of adb on my LG D-331, the phone shows a loop of the startup ( where's the logo ).
This problem appeared after I changed the build.prop file and rebooted my device.
I want any solution to make it usable ( whatever the solution, even if everything got wiped off ).
The recovery mode in unreachable. With adb, I did 'adb reboot-recovery' which lead me to a screen where there is the logo of android saying "Deleting"
After that, nothing new happens, still that startup loop.
I really need some advice.
Thanks in advance for your help !
EDIT 1: I managed to reach the recovery mode, where I was asked to factory reset my phone, I chose yes and yes then waited for the phone to reset, but the operation aborted and the screen goes back to the loop.
Hi all, my question prescinds from a phone particular model. The problem is that for some sort of software issue, the phone restarts itself after few seconds that rom unlock appear. I'm sure that is a sw issue because in recovery mode it stays alive and when he does the application update after a dalvik cache wipe, all goes well too!
It's not possible to enable usb debug because it restarts too soon and in recovery (cwm) it's not possible to connect via adb. It's not a rooted phone. Also in safe mode it stucks in bootloop
What i can do before a factory reset?
phantastic_ said:
Hi all, my question prescinds from a phone particular model. The problem is that for some sort of software issue, the phone restarts itself after few seconds that rom unlock appear. I'm sure that is a sw issue because in recovery mode it stays alive and when he does the application update after a dalvik cache wipe, all goes well too!
It's not possible to enable usb debug because it restarts too soon and in recovery (cwm) it's not possible to connect via adb. It's not a rooted phone. Also in safe mode it stucks in bootloop
What i can do before a factory reset?
Click to expand...
Click to collapse
Looks like its bootlooping ... Yes its a software issue ... I don't think u have any option other than factory reset ... Take a backup first before u do that...or perhaps u can use a logcat if u know what it is
i will try to take backup in sd card and retrieve some useful data from this.
how can i use logcat if can't connect through adb?
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
Hey, I think the phone is totally brick, can anyone confirm it? Here we go
The phone came totally crazy and it has restart automatically, and went to the Fastboot mode. (i dont know if it was updating something, i had not using it). So, I've UNLOCKED it with the code that Huawei brings, till here everything is fine. The problem becames when I try to flash the CUST, CACHE, ABOOT, and the others that I think that are useless, it says
"FAILED (remote: Command not allowed)". But I can flash SYSTEM, RECOVERY, BOOT and USERDATA correctly. But that doesn't solve the problem of the LOOP RESTART, it show the Logo of Huawei and keeps restarting. I also tried 3 other stock roms, and the problem persists. Also tried putting the dload in SD with the UPDATE.app, and starting the phone with 3 buttons pressed and I have the error of "Error:update.app is a invalid package" and doens't work. (If i go to the Recovery it just stay for 1-2 seconds and automatically restart again). I don't think it could be the power button because it stays well in the Fastboot mode and also tried the CWM and works. I've been searching solutions for around 5 hours and didn't found any. I wish someone could help me, thanks in advance!
PD: I have the ADB Drivers updated.
live it