Aloha ppl ..howya doin.. Okay so my problem is ..I have install beats audio installer on rooted android 4.2 but it all mess up ..my phone doesn't have sound and the equalizer whenever I tried to open it.it say'musicfx has stopped working' something like that...so,I uninstall beats audio and my phone got sound again but equalizer is not fixed ...I tried to copy back deleted file to system/etc and system/lib using root browser as recommended by someoneee and this what I got ~>*see attachment..I think the file is not compatible to android 4.2 ?? Anyway,I really need ur help..please please..okay.bye for now..thanks a lot . p:s I don't backup..he he he..:silly:..I really want EQUALIZER back!
nanae_mochi said:
Aloha ppl ..howya doin.. Okay so my problem is ..I have install beats audio installer on rooted android 4.2 but it all mess up ..my phone doesn't have sound and the equalizer whenever I tried to open it.it say'musicfx has stopped working' something like that...so,I uninstall beats audio and my phone got sound again but equalizer is not fixed ...I tried to copy back deleted file to system/etc and system/lib using root browser as recommended by someoneee and this what I got ~>*see attachment..I think the file is not compatible to android 4.2 ?? Anyway,I really need ur help..please please..okay.bye for now..thanks a lot . p:s I don't backup..he he he..:silly:..I really want EQUALIZER back!
Click to expand...
Click to collapse
Have you checked that beats audio had compatability with the system equalizer? It's very likely that they have messed each other up somehow. My only recommendation is that you reflash your rom, because getting the equalizer to work is hard without a reflash.
Make a nandroid backup of data, wipe system and reflash, and good luck
Does anyone know if there is any sound mods that will work for rooted 5.02?
Thanks
There are plenty of sound mods you can try out offered by the Xperia community at the Xperia Cross Devices board. Be sure to make a system backup at the very least in case the new mods aren't to your liking or preference.
try Xtreme Music Mod or Project Desire, they rocks
Im on 5.0.2. I use VIPER"4"ANDROID and it is awesome. There is so much u can adjust with it. U can make your music sound perfect.
On 5.0.2. You have to use the apk, lolliviper to get it to work with lollipop.
Ive also used PROJECT DESIRE and it was pretty nice but i could not use it unless i didnt want to have viper4 working on my system at all, i have to be able to use viper becouse of the bass. I dont have expensive headphones, an the bass i can get using viper i cannot replicate with headphones without it( im a basslover). I couldnt find any way to have them both work on my system becouse project desire changes the sound configuration files in a way that will not let viper4android work at all.
I have also got EXTREMEMUSIC audio affects to work on 5.0.2, And it works alongside viper.
Also i have got DOLBY ATMOS to work, but it has only worked once or twice and the rest of the time nothing happens when i use it, i can change settings with no affect. I dont know if i did somthing wrong or didnt set it up/ settigs wrong. But i did get it to work randomly once at least.
Can anyone provide link for viper? I'm on ?. 509 Thx ?
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
Download the lolliViPER.zip and install via recovery.
Do NOT install the lolliViPERsurRound.zip.
Works great!
AddictedToGlass said:
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
Download the lolliViPER.zip and install via recovery.
Do NOT install the lolliViPERsurRound.zip.
Works great!
Click to expand...
Click to collapse
OK I give it a go. Thx
---------- Post added at 07:28 AM ---------- Previous post was at 07:02 AM ----------
I tried to flash lolliViPER.zip and I don't think it works.
It does.
AddictedToGlass said:
It does.
Click to expand...
Click to collapse
Can't get it to work on z3v d6708
Are you rooted and running nut's recovery partition?
Read the entire first part of the thread I linked for you. Download, install via recovery, reboot, find and open the app, and it then has to download driver(s) of your choice (very quickly). I believe it calls for another reboot after that. Then go into the app again and play with all the amazing options.
You can truly tailor the sound to any liking.
Persist on this one. Trust me, it's well worth it!
AddictedToGlass said:
Are you rooted and running nut's recovery partition?
Read the entire first part of the thread I linked for you. Download, install via recovery, reboot, find and open the app, and it then has to download driver(s) of your choice (very quickly). I believe it calls for another reboot after that. Then go into the app again and play with all the amazing options.
You can truly tailor the sound to any liking.
Persist on this one. Trust me, it's well worth it!
Click to expand...
Click to collapse
Yea I tried that. But no worries
I've successfully rooted and installed TWRP, but I can't install Viper, no matter which method I use; either flashing a zip or using the APK. Busybox is installed and tests ok, as does SuperSu. Has anyone successfully installed Viper on the M4? It seems to be the driver that doesn't install properly. On a couole of attempts it states the driver has installed, yet it does nothing, or gives an I/O error.
Any help would be much appreciated. I'm using a 2303 on 3.111 firmware.
Cheers!
First google result
http://forum.xda-developers.com/m4-aqua/general/viper4android-xperia-m4-aqua-t3301610
wackygoose said:
First google result
http://forum.xda-developers.com/m4-aqua/general/viper4android-xperia-m4-aqua-t3301610
Click to expand...
Click to collapse
Worked perfectly, thanks! Any recommendations on boosting the volume, as even with the best IRS files, and my usual tweaks, the volume isn't great.
What will happen if I Install Viper with the stereo speakers mod already Installed?
MetalOllie said:
Worked perfectly, thanks! Any recommendations on boosting the volume, as even with the best IRS files, and my usual tweaks, the volume isn't great.
Click to expand...
Click to collapse
Increase db from 0 to 6. that should work..if the thread i created helped you please hit thanks
GerasxD said:
Increase db from 0 to 6. that should work..if the thread i created helped you please hit thanks
Click to expand...
Click to collapse
Thanks.. That was the first thing I did, along with using a variety of convolver IRS files, but it still seems a tad quiet, especially compared to Viper on my old Xperia SP.
A few days ago, there was an update from zhuhang for the already released Viper4Android 2.5.0.5. It addresses the issues that a lot of people are having with getting V4A working under Nougat. I tested it with my ROM, and the driver installed without error. So then I decided to make a flashable zip that would preinstall the driver and save you a few minutes plus a reboot. Other than possibly needing to grant Storage permissions in Settings, this is a quick flash and go.
The zip that should work on any LG-based ROM, and possibly on AOSP-based as well. Just download, flash in TWRP, and reboot. You may need to grant Storage permissions in Settings.
XDA Thread:
https://forum.xda-developers.com/showthread.php?t=2191223
V4A Blog Site:
http://vipersaudio.com/blog/?page_id=31
I [obviously] didn't create V4A, but if you include my zip in your ROM, please give a mention and link back to this thread.
First
Thanks for this.. I'm sure many will get use out of it..!
Not sure if I did something wrong or not - but I can't get it to work.
I'm on DevDigital's ls997 ver 6.5 magisk phh.
Flashed in twrp. Granted root permision.
go to SuperSU / un-check Mount_name spaces separately / under the settings. turn on adb debugging.
Inscribed via LG v20 (iOS 11.1.0 Aplha)
midmadn said:
Not sure if I did something wrong or not - but I can't get it to work.
I'm on DevDigital's ls997 ver 6.5 magisk phh.
Flashed in twrp. Granted root permision.
Click to expand...
Click to collapse
You shouldn't have been promoted to grant root access. V4A only needs root to install the driver, which is preinstalled.
If you're being prompted to install a driver, the ROM likely uses a different conf file to control audio.
Sent from my iPhone 7 Plus using Tapatalk
He built and ported to magisk recently. Has a module you need to install then install Swansong
I haven't played with it yet. I like the new app but dont see a diffence in drivers from 2.5.0.4 to 2.5.0.5
Magisk has a compatible module in his downloads via the app that works with my rom (2.5.0.4)
I install that via magisk manager then i pulled the latest viper4arise.apk and installed instead of the older ui viperfx apk that is linked on the downloads page inside magisk manager.
Driver installs correctly for many others as well. You may need to dirtyflash my rom and start over. Magisk manager also received a update yesterday via playstore. The process on phh or magisksu as its now called is different now as its "systemless" vs modifying the actual system files.
If you dont want to go 5through the hassel of above. Just go to developer settings inside of the viper apps settings and turn off selinux and recheck driver status. Im 99% sure it works this way but ive said it before, i wont push the rom this route as i dont perfer it to be off by defualt.
Hope this helps
Got it all worked out thanks to the rom creator above. Team DevDigitel.
Thank You
Thank you for your work on this flashable zip it's much appreciated, I just have a couple of questions though for anyone who might know..
I'm still running the original stock rom (rooted with TWRP) on my LG V20 and a while back I followed the directions from another thread to install V4A, and I was able to get it to work (even through bluetooth) but it's kind of wonky and just hit or miss so I'd really like to try this one out instead.
I'm assuming I should uninstall the version of V4A I have right now but is there anything else that I need to do (besides a nand backup) before flashing this one? Also one of the steps to install the V4A I have right now was deleting a system file (I'll have to go look to be sure but I believe it was something like mixer_paths.xml), so I just thought I'd check to see if that will somehow effect this version or if I possibly need to put the original file back where it was before flashing this one?
I apologize if these are stupid questions but I just thought play it safe and check first before giving this a shot, because even though the version I have is kind of wonky it still works through bluetooth which from what I've read is something that a lot of people haven't been able to get working, and since I use it so much I'm just afraid to even risk losing it. Anyway I'll definitely create a backup before doing anything but any help or suggestions would be appreciated. Thanks!
Sent from a ridiculously modified ColecoVision
jeep447 said:
Thank you for your work on this flashable zip it's much appreciated, I just have a couple of questions though for anyone who might know..
I'm still running the original stock rom (rooted with TWRP) on my LG V20 and a while back I followed the directions from another thread to install V4A, and I was able to get it to work (even through bluetooth) but it's kind of wonky and just hit or miss so I'd really like to try this one out instead.
I'm assuming I should uninstall the version of V4A I have right now but is there anything else that I need to do (besides a nand backup) before flashing this one? Also one of the steps to install the V4A I have right now was deleting a system file (I'll have to go look to be sure but I believe it was something like mixer_paths.xml), so I just thought I'd check to see if that will somehow effect this version or if I possibly need to put the original file back where it was before flashing this one?
I apologize if these are stupid questions but I just thought play it safe and check first before giving this a shot, because even though the version I have is kind of wonky it still works through bluetooth which from what I've read is something that a lot of people haven't been able to get working, and since I use it so much I'm just afraid to even risk losing it. Anyway I'll definitely create a backup before doing anything but any help or suggestions would be appreciated. Thanks!
Sent from a ridiculously modified ColecoVision
Click to expand...
Click to collapse
You don't need to delete any files for this zip. You're supposed to delete /system/etc/audioeffects.conf, but I've done that with the script.
As I use this more, Bluetooth still occasionally doesn't process after pausing for an extended period, like getting out of the car for more than 5 minutes, but all you need to do for it to kick back on is exit V4A from the menu, then open it up again. It'll immediately start processing again.
If you have an unmodified system backup to restore, that will help ensure it works OK, but it may not be needed.
Sent from my iPhone 7 Plus using Tapatalk
NotATreoFan said:
You don't need to delete any files for this zip. You're supposed to delete /system/etc/audioeffects.conf, but I've done that with the script.
As I use this more, Bluetooth still occasionally doesn't process after pausing for an extended period, like getting out of the car for more than 5 minutes, but all you need to do for it to kick back on is exit V4A from the menu, then open it up again. It'll immediately start processing again.
If you have an unmodified system backup to restore, that will help ensure it works OK, but it may not be needed.
Sent from my iPhone 7 Plus using Tapatalk
Click to expand...
Click to collapse
Thank you for the quick response and for the info and I have no clue why I had mixer_paths on the brain but yeah audioeffects.conf is the file I had to delete while installing the version I have, and as far as what you said about the bluetooth acting up it sounds pretty similar to the wonkyness that I was describing with the version I currently have.
One weird thing that I've noticed with mine (and I don't have the slightest idea how or why it's doing it) is when I'm listening to music through my bluetooth headset, none of the settings under the "Bluetooth" section in V4A have any effect on the sound whatsoever.. but what's weird is that all of the settings under the "Headphones" section do (so it's basically like the section names were swapped somehow)?!
I know for sure that I don't have anything plugged into the jack and the headset I'm using is definitely bluetooth (because it's pretty easy to tell lol), so I have no clue why the settings under headphones would work just fine while the ones under bluetooth don't do it anything at all?
Anyway thank you again for the info I'll give it a shot as soon as I have time and let ya know how it went, and unfortunately the only thing I didn't backup was my unmodified system (it didn't even cross my mind until after I was done rooting) but hopefully it'll still be ok. Thanks again!
Sent from a ridiculously modified ColecoVision
jeep447 said:
Thank you for the quick response and for the info and I have no clue why I had mixer_paths on the brain but yeah audioeffects.conf is the file I had to delete while installing the version I have, and as far as what you said about the bluetooth acting up it sounds pretty similar to the wonkyness that I was describing with the version I currently have.
One weird thing that I've noticed with mine (and I don't have the slightest idea how or why it's doing it) is when I'm listening to music through my bluetooth headset, none of the settings under the "Bluetooth" section in V4A have any effect on the sound whatsoever.. but what's weird is that all of the settings under the "Headphones" section do (so it's basically like the section names were swapped somehow)?!
I know for sure that I don't have anything plugged into the jack and the headset I'm using is definitely bluetooth (because it's pretty easy to tell lol), so I have no clue why the settings under headphones would work just fine while the ones under bluetooth don't do it anything at all?
Anyway thank you again for the info I'll give it a shot as soon as I have time and let ya know how it went, and unfortunately the only thing I didn't backup was my unmodified system (it didn't even cross my mind until after I was done rooting) but hopefully it'll still be ok. Thanks again!
Sent from a ridiculously modified ColecoVision
Click to expand...
Click to collapse
You can definitely control BT devices from the BT tab on this one. And I've found with more testing that before I get in my car, switch to V4A and exit it, then open it again as soon as Play Music connects. Works every time.
I would just like to say thank you!!
I installed this .zip on my T-mo variant over the previous V4A install via dirty flash. It resolved my Bluetooth processing issues on the stock V20 ROM. I've been working on this the past few days. VERY happy it now works in my car like my last phone did!
Now, once I get the nerve to flash over the new modem and bootloader via TWRP to get up to 20j, I'm highly inclined to check out the new ROM by NATF.
Cheers!
joesee said:
I would just like to say thank you!!
I installed this .zip on my T-mo variant over the previous V4A install via dirty flash. It resolved my Bluetooth processing issues on the stock V20 ROM. I've been working on this the past few days. VERY happy it now works in my car like my last phone did!
Now, once I get the nerve to flash over the new modem and bootloader via TWRP to get up to 20j, I'm highly inclined to check out the new ROM by NATF.
Cheers!
Click to expand...
Click to collapse
Thank you.
The new modem and other firmware is not a strict requirement for ROMs built on 10j. You just need to make sure TWRP is on the latest release.
NotATreoFan said:
A few days ago, there was an update from zhuhang for the already released Viper4Android 2.5.0.5. It addresses the issues that a lot of people are having with getting V4A working under Nougat. I tested it with my ROM, and the driver installed without error. So then I decided to make a flashable zip that would preinstall the driver and save you a few minutes plus a reboot. Other than possibly needing to grant Storage permissions in Settings, this is a quick flash and go.
The zip that should work on any LG-based ROM, and possibly on AOSP-based as well. Just download, flash in TWRP, and reboot. You may need to grant Storage permissions in Settings.
XDA Thread:
https://forum.xda-developers.com/showthread.php?t=2191223
V4A Blog Site:
http://vipersaudio.com/blog/?page_id=31
I [obviously] didn't create V4A, but if you include my zip in your ROM, please give a mention and link back to this thread.
Click to expand...
Click to collapse
Out of desperation I tried this on my nexus 6 running 7.1.2, works perfect so far, appreciate you work on this.
Sent from my Nexus 6 using Tapatalk
9wire said:
Out of desperation I tried this on my nexus 6 running 7.1.2, works perfect so far, appreciate you work on this.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Excellent! I'm glad it works for you. The changes made should work on multiple devices, I just couldn't test it myself.
Can we flash this if we have dolby? Or should I uninstall dolby 1st?
Still_living714 said:
Can we flash this if we have dolby? Or should I uninstall dolby 1st?
Click to expand...
Click to collapse
They can co-exist.
Sent from my iPhone 7 Plus using Tapatalk
Thanks!
Just wanted to say thanks for this. It worked great right from the get go. If anybody is wondering its running on JDCTeam AOSP 7.1.2 on a beat up old S4.
NotATreoFan said:
A few days ago, there was an update from zhuhang for the already released Viper4Android 2.5.0.5. It addresses the issues that a lot of people are having with getting V4A working under Nougat. I tested it with my ROM, and the driver installed without error. So then I decided to make a flashable zip that would preinstall the driver and save you a few minutes plus a reboot. Other than possibly needing to grant Storage permissions in Settings, this is a quick flash and go.
The zip that should work on any LG-based ROM, and possibly on AOSP-based as well. Just download, flash in TWRP, and reboot. You may need to grant Storage permissions in Settings.
XDA Thread:
https://forum.xda-developers.com/showthread.php?t=2191223
V4A Blog Site:
http://vipersaudio.com/blog/?page_id=31
I [obviously] didn't create V4A, but if you include my zip in your ROM, please give a mention and link back to this thread.
Click to expand...
Click to collapse
always a true hero. hope all is well with you and yours.
Works perfect on Desolation Rom . Just flash and reboot and approve with SuperSU and Awesomeness !
Sent from my LG-LS997 using XDA-Developers Legacy app