Hey guys,
is it okay to use the headset MDR-NC31E with other devices?
Of course, noise canceling works only with the Z2. I'm wondering about normal stereo audio. If I'm using the earphones with my laptop, I assume the built-in microphones get the audio signal as well. Wouldn't this damage them after a while? Does it even work?
Thanks in advance,
avra
It does seem to work with alot of other devices, some of dont recognise the earphones them selfs,
Im quite sure no damage is done to the earpieces them selfs because mine work fine and i use them with alot of things
Sent from my D6503 using XDA Premium 4 mobile app
Those do not work with my old Galaxy S2 so presumably the newer Samsung devices are not compliant with it as well.
Related
hi,
already asked this on the official sony-erricson forum but no response, so maybe someone here can help....
has anyone managed to connect an external microphone to the x10 for video recording? maybe with some kind of self-made adapter?
not talking about hands-free sets but rather a more "professional" recording microphone.
i already tried to connect various external microphones (active and non-active) to the phone but then i only get statics / clicking noises.
reason i'm asking is i took a video at a concert but the sound is clipping really bad... really a shame especially with upcoming 720p recording....
(maybe another solution would be if it was possible to adjust the sound recording level... any app for that?)
It should be possible to add an external microphone. You probably will need a homemade adapter. The headphone/microphone jack is a TRRS connector (tip, ring, ring, sleeve). Check Wikipedia for TRS. The "pinout" is listed there.
Sent from my X10a using Tapatalk
So if you just plug the handsfree in with and/or without the headphones as well, it records audio (voice memo and video)?
bazzatron said:
So if you just plug the handsfree in with and/or without the headphones as well, it records audio (voice memo and video)?
Click to expand...
Click to collapse
yes, you can use the hands-free (with or without the headphone part) as a microphone when recording video... quality is a little better than the internal microphone but still not really good...
argnom said:
The headphone/microphone jack is a TRRS connector (tip, ring, ring, sleeve). Check Wikipedia for TRS. The "pinout" is listed there.
Click to expand...
Click to collapse
thank you argnom... . now i know what to search for..
there seem to be some adapters for the iphone that split the trrs connector into seperate microphone/headset connectors... maybe i will try one of these... or is the wiring different on the x10 from the iphone?
www . showmecables.com/viewItem.asp?idProduct=8335
edit: think i found the one i need (IF the wiring is the same as for the iphone...)
www . kvconnection.com/product-p/km-iphone-mic.htm
I really don't know if the wires are in the same order... I suppose they should be.
Sent from my X10a using Tapatalk
Anything that have mic it won't work with x10
Sent from my X10a using Tapatalk
the_ahmadzais said:
Anything that have mic it won't work with x10
Sent from my X10a using Tapatalk
Click to expand...
Click to collapse
any more info to back this up? did you try it yourself? (what mics did you try?) or read it somewhere? (link?)
I've tried everything single brand. Dr dre beats, shure, sennheiser, any headphones or earbuds that have mic it won't work with x10. You can use x10 headset that came in box with regular earbuds or headphones
Sent from my X10a using Tapatalk
the_ahmadzais said:
I've tried everything single brand. Dr dre beats, shure, sennheiser, any headphones or earbuds that have mic it won't work with x10. You can use x10 headset that came in box with regular earbuds or headphones
Sent from my X10a using Tapatalk
Click to expand...
Click to collapse
OR you could just buy a "high" end bluetooth audio thing (to high to remember what its called, but you get what i mean)
no pesky wires either then
booyaga said:
OR you could just buy a "high" end bluetooth audio thing (to high to remember what its called, but you get what i mean)
no pesky wires either then
Click to expand...
Click to collapse
lol true like mw600 but drains battery
Has anyone got an external microphone working with the HTC One X. I have bought and adapter and a microphone but its still not working at all. Any help would be appreciated.
on iphone 3gs..i could plug in a normal non-mic earphone...and the phones main mic would still work as a mic ..and i could hear other party's voice through the earphone
but on xperia...normal earphones dont work
Yes, i am having this problem too, i have tested this with my car's aux and my normal skullcandy head phones
Works for me but i have x10a only issue i have is the port is a little loose on some headphones
Sent from my X10a using XDA App
Update to 2.2.1 beta 4 and it works flawlessly :]
Sent from my X10i using XDA App
Using Bose in ears and works fine since legit 2.1 through 2.3 right now. Could be the brand although unlikely because used to use iphone buds and didn't work with 2.1...
Sent from my Xperia X10 using XDA App
no issues wit mine
im usin fiio e5 pair wit koss sparkplugs
They do if you plug them into the long cable - which is where the microphone is.
i straight plug them into the phone
This was a problem on the older firmware.. But latest version has fixed it.. .435
Sent from my X10 using XDA and Swype.
same problem here with skullcandy titan headphones... they dont work unless i press the mic button in on the earphones!
chronic86 said:
same problem here with skullcandy titan headphones... they dont work unless i press the mic button in on the earphones!
Click to expand...
Click to collapse
Wierd....
Sent from my X10i using XDA App
I never had any issues with it. My phone had 1.6 when i got it and my monster turbine pros still worked beautifully
Sent from XDA Premium from my X10a rooted running 2.2.1 Cyanogen 6.1.3gingerbreadV1 ROM
me to. still use my Sennheiser without any problems. (X10black 2.1, X10white 2.3.3)
Sent from my X10 using XDA Premium App
I haven't had any problem with phones...
I had problems with the apple headphones w/mic, but the apple ones without the mic worked perfectly... it must be something to do with the mic, cause now im using skullcandy inkd (no mic) and so far Ive had no problems.
Sent from my X10i using XDA App
yes
the problem is with the mic on the SE headset...i connected it to my blackberry...still same problem
connected headphones to ipod via the mic..same problem...without mic no problem
so mic is the culprit
On normal headphones there are three contacts on the jack: left right and ground.
On on headsets that also have a microphone there are four: left right ground and mic.
If you have to press the button for the audio to be normal then mic and ground need to be switched. All of the SE headsets are like this by default but they suck, so we can get an extension cable and cut it and reconnect it switching ground and mic. If such a cable exists. I cant find one and scrapped a variety of adapters to make an equivalent. If you would like to give it a shot you have to switch the two contacts farthest from the tip.
All of my normal headphones work no problem, so if anyone has problems with those it's a mystery to me.
Anyways we can all thank SE for this.
its okay
i bought a MW600 and ended all my problems
working fine
I found a fix for the Titan's but it does include soldering and possibly losing the mic function but if you're not bothered about that then give this a shot!
What I did was to open up the mic module and play around by bridging certain areas together. What I found was that on 1 side of the circuit inside there is a tiny resistor/cap which when bridged brings the sound of the headphones back to normal so what I did was simply solder over the cap/resistor which then brought my headphones back to life!
The reason that people have problems with these headphones is because they are set up for Apple devices and because of this 2 wires are switched around, mic and ground I believe! So, If you go out specifically to buy any of these type of headphones then make sure that they're not Apple specific and that they are universal otherwise you'll come across the above problem.
This quick fix may work for other Skullcandy headphones that are designed for Apple products but i can't guarantee it as I only have the Titan's!
Hope this helps some of you out and saves you a few penny's in the long run!
Hi.
This is my first Samsung so, have mercy
None of my headphones are working.
I only get sound in one side and the other is too low. Almost inexistent.
I tried with cable to connect it to my audio system and the same.
Next step was to use the hands free from my X10.
Is working ... but not as expected. Almost no bass and no trebles.
The only ones working are the ones from the SGS2 box or using my headphones via MW600 bluetooth (which i don't like it as it drains more batter and the SGS2 is power hungry)
So, is a problem with the 3.5" ?
Or my headphones?
Or ... is a compatibility problem? Can i find somewhere an 3.5" adapter?
Thanks
Its gonna sound dumb but u have plugged the jack all the way in yeah? Takes a little bit more force than u think
Sent from my GT-I9100 using XDA Premium App
tuxStyle said:
Hi.
This is my first Samsung so, have mercy
None of my headphones are working.
I only get sound in one side and the other is too low. Almost inexistent.
I tried with cable to connect it to my audio system and the same.
Next step was to use the hands free from my X10.
Is working ... but not as expected. Almost no bass and no trebles.
The only ones working are the ones from the SGS2 box or using my headphones via MW600 bluetooth (which i don't like it as it drains more batter and the SGS2 is power hungry)
So, is a problem with the 3.5" ?
Or my headphones?
Or ... is a compatibility problem? Can i find somewhere an 3.5" adapter?
Thanks
Click to expand...
Click to collapse
Worked with other headsets for me
- Dell streak headset
-Iphone headset
Needed that extra push to fit the pin in really well
Well, i'll try one more time ... anyway, earlier i found something else using the X10 headset.
If i press the "answer" button from headset, everything is fine but as soon as is de-pressed ... it goes back.
I have a similar problem with my expensive Shure earphones. They sound much worst and "tinny" then the standard earphones that come with the S2. Even if these earphones are cheap, at least the sound is acceptable.
If I plug the output of the S2 into my car stereo, I again have terrible sound. I am not sure if this has anything to do with the fact that the stock S2 earphones have 4 contacts on the jackplug as compared to 3 on normal jackplugs. The extra contact, I presume, is to permit the switch for fast forward to work on the headphones.
I can't understand why other people don't have this problem - and yes the jack plug is pushed right in.
Yep, pretty sure, the jack is down entirely and still not working.
I tried with the SE X10 headset and normal stereo headphones
I think i will have to stick with the bluetooth if i can't find an adapter of some sorts.
Tried two pairs of headphones now and they both don't work properly at all. A pair of htc ones and some apple ones. Do SE phones have to have SE headphones to work properly or have I been sold a faulty phone?
Sent from my X10 using xda premium
Found my answer. SE played dirty and switched some connections. So I need to buy an adapter or pay for SE headphones... Sigh.
Sent from my X10 using xda premium
ephumuris said:
Tried two pairs of headphones now and they both don't work properly at all. A pair of htc ones and some apple ones. Do SE phones have to have SE headphones to work properly or have I been sold a faulty phone?
Click to expand...
Click to collapse
Are you talking about 'headphones' or 'headsets'? Headphones don't have any microphone components while headsets do.
Most any normal set of headphones with a 3.5mm stereo connector should work fine with the X10.
The only thing to be careful of are the noise-canceling type of headphones. The 3.5mm connectors for those can vary in design that may be specific to whatever device they ship with. Incompatibilities can then be no sound from the headset or sound from just one ear bud when plugged into a different device.
If you're referring to headsets, then those can also have compatibility issues too due to product-specific differences in 3.5mm connector designs.
Yeah they were both headsets I tested actually. So regular headphones would work fine? I don't have any lying around so would have to buy some.
Sent from my X10 using xda premium
ephumuris said:
So regular headphones would work fine?
Click to expand...
Click to collapse
Yep. Regular stereo headphones with a 3.5mm connector should work.
i bought skullcandys, not realising they had a mic on them, but if you notice the mike part may have a button on it?? mines did and when pressed sound came out fine so i just glued it down, now they work perfect
I had a problem with urbeats headset. And some sony with mic. Its not detect and sometimes its detected. Any suggestion? Its work perfectly with non mic headset.
verioananta said:
I had a problem with urbeats headset. And some sony with mic. Its not detect and sometimes its detected. Any suggestion? Its work perfectly with non mic headset.
Click to expand...
Click to collapse
When trying to use my razor kraken pro headset it's not detected neither, this is also a combo headset with Mic in
Sent from my LG-D620 using XDA Free mobile app
So its not only my problem? I think, my headset jack was broke. How the solution?
verioananta said:
So its not only my problem? I think, my headset jack was broke. How the solution?
Click to expand...
Click to collapse
My phone is working perfectly fine with something like the default headset, headsets with no Mic etc.. but my razor kraken pro, which is also optimized for phones etc, doesn't work with this device, but every other phone I try. My headset jack is perfectly fine, in fact I just had my whole fun in for a repair and they didn't even notice anything about the headset jack
Sent from my LG-D620 using XDA Free mobile app
This is due to the defferent 3.5mm 4-pin standard used in headsets.
Some use OMTP, and some CTIA standard.... basicly, the ground and mic poles are switched.
qutlacha said:
This is due to the defferent 3.5mm 4-pin standard used in headsets.
Some use OMTP, and some CTIA standard.... basicly, the ground and mic poles are switched.
Click to expand...
Click to collapse
Mhm does seem weird advertising it as a 3.5 headset which supports all android devices... But yeah it's properly that. Just a little sucky when they're support says it's a problem on my end, and they won't give a refund or anything even though they advertised falsely
Sent from my LG-D620 using XDA Free mobile app
One solution is to buy CTIA to OMTP adapter, as we can be sure your Razer Kraken Pro has CTIA connector since it's advertised for use with iPhone, and iPhone use CTIA standard.