Okay so I tried unrooting by flashing the stock mi3 tar file.. but it failed because I was on an mj4 rom I guess.. so what do I need to do now? Download mj4 stock firmware and flash then reboot into recovery and wipe? I am new to this stuff. Also need to know where to get the files as I have searched everywhere. Thank you much.
-Matthew
Anybody have any tips? I need this phone to be at least operational.
Read the posts in the other thread you posted in asking the same thing. Answer is there. http://forum.xda-developers.com/showthread.php?t=2525866
w7excursion said:
Read the posts in the other thread you posted in asking the same thing. Answer is there. http://forum.xda-developers.com/showthread.php?t=2525866
Click to expand...
Click to collapse
I did that and I've still got a bootloop. And I've got a very frightening orange bar that will flash then fade out.
I just tried to flash jellybomb after I flashed the mj4 file and it said success but its not working. Do I need to flash the stock rooted touchwiz rom? Or do I need to do chainfire root again then wipe then flash?
mscooksey21 said:
I just tried to flash jellybomb after I flashed the mj4 file and it said success but its not working. Do I need to flash the stock rooted touchwiz rom? Or do I need to do chainfire root again then wipe then flash?
Click to expand...
Click to collapse
Flash this in Odin PDA Block to restore your phone to Stock MJ4.
Return to Stock N900PVPUBMJ4
See if that works^ before anything
Sent from Sprint Galaxy Note 3 using Tapatalk
Hi, i just bought my note 2 and ive already unlocked it and rooted it, i want to use a ROM that has 4.3 Jelly Bean like the N3BULA ROM, it says flash the MJ9 OTA Firmware using Odin. But on the forums there is a forum called "Once you're unlocked don't use odin to flash custom ROMs"
1. I should be able to flash the MJ9 using odin safely right because its not a custom rom right?
2. How do i flash the MJ9 update using odin?
3. Once i flash the MJ9 update can i still use non 4.3 ROM?
Question 1: You are correct.
Question 2: Download, then extract with 7zip. Put phone into download mode. Open Odin on computer and connect the phone. Place extracted md5 into the pda slot and hit start. It'll do it's thing and your phone will reboot and be done.
Question 3: Yes as long as don't take the OTA update from Samsung you will able load roms as usual
Once my phone is in download mode, odin doesn't recognize my phone. Any reason why ? I'm so frustrated
pacedrum69 said:
Once my phone is in download mode, odin doesn't recognize my phone. Any reason why ? I'm so frustrated
Click to expand...
Click to collapse
Check your drivers. If you've used casual, sometimes removing those drivers will help and by also installing updated Samsung drivers.
If you've done all of the above and it's still not recognized. I recommend trying a different USB cable.
Sent from my SCH-I605 using Tapatalk
synapsesboob said:
Check your drivers. If you've used casual, sometimes removing those drivers will help and by also installing updated Samsung drivers.
If you've done all of the above and it's still not recognized. I recommend trying a different USB cable.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Ive tried everything :-/ ugh
whn flashing in odin will a pit file also be needed (wana flash stock mj9)
I didn't need it..
Sent from my SCH-I605 / Galaxy Note 2 / JB 4.3 / Unlocked, Rooted and ROMed... using Tapatalk v 2.4.13
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
pacedrum69 said:
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Whats the problem? Does Odin Start doing it atleast??
pacedrum69 said:
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
sometimes it happen to me to,
if driver is not the issue, then try close the odin and unplugged the cable, plug it back then start odin.
Bonkurei said:
sometimes it happen to me to,
if driver is not the issue, then try close the odin and unplugged the cable, plug it back then start odin.
Click to expand...
Click to collapse
Info that may help: I searched here in xda not on this device or I'd post a link, for how to install Odin and found that for each Samsung device there are some set of Odin versions that are compatible. I used Odin just now (took less than a minute) version 3.07 for my phone. Note that my drivers were already installed and working since I unlocked the bootloader a year ago. For others: it simply rebooted afterwards and all is well.
Can anyone give me the download link for MJ9 OTA Firmware by Beans?
Thanks
Mr_Denni said:
Can anyone give me the download link for MJ9 OTA Firmware by Beans?
Thanks
Click to expand...
Click to collapse
Here's a link where you can grab the MJ9 firmware provided by Beanstown106... ( http://forum.xda-developers.com/showthread.php?t=2578458 ). Look down on the first post of the thread for the link to "Full Firmware Package" that you need to flash in Odin...that will bring you to the Android file host where you can download Beanstown106's file-- "toltevzw_mj9_official_firmware.tar.md5.7z."
Also, here's a link to a post with more detailed instructions on how to Odin flash it after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
Please make sure to do a thanks to BeansTown106 for the firmware file and to sithjedi333 for the helpful instructions.
Sent from my SCH-I605 using XDA Premium 4 mobile app
mattnmag said:
Here's a link where you can grab the MJ9 firmware provided by Beanstown106... ( http://forum.xda-developers.com/showthread.php?t=2578458 ). Look down on the first post of the thread for the link to "Full Firmware Package" that you need to flash in Odin...that will bring you to the Android file host where you can download Beanstown106's file-- "toltevzw_mj9_official_firmware.tar.md5.7z."
Also, here's a link to a post with more detailed instructions on how to Odin flash it after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
Please make sure to do a thanks to BeansTown106 for the firmware file and to sithjedi333 for the helpful instructions.
Click to expand...
Click to collapse
Thank you very much, bro for your links :good:
Hey guys instead of starting a new thread I thought I would ask here... I just bought a rooted note 2 on craigslist and it has the N3bula rom on it, but it is the first version. It is a little slow for me, so i wanna flash the N3bula 2 rom, but I am not sure if I have the MJ9 thing on my phone. Is there any way to check?
washburnky said:
Hey guys instead of starting a new thread I thought I would ask here... I just bought a rooted note 2 on craigslist and it has the N3bula rom on it, but it is the first version. It is a little slow for me, so i wanna flash the N3bula 2 rom, but I am not sure if I have the MJ9 thing on my phone. Is there any way to check?
Click to expand...
Click to collapse
settings > about device > look the baseband version it shoud say like this I605VRUEMJ9
but since its already run on N3bula i think its already on MJ9.
MJ9 Flashing failed
I tried to flash the MJ9 firmware many times through odin , but every time it fails on the modem.bin .... any ideas ?
hazemsalah said:
I tried to flash the MJ9 firmware many times through odin , but every time it fails on the modem.bin .... any ideas ?
Click to expand...
Click to collapse
Also while installing 4.1.2 VRAMC3 stock unrooted rom , the odin fails at modem.bin
I never took the 4.3 OTA
I can run the TWRP recovery and install custom roms [4.1.2 CleanROM V5] , but the baseband version is unknown and the network is not working , even i have installed VRAM3 Modem or VRALL4
Note: I have flashed the ND7 modem and MJ9ModemParam before while trying to install 4.4.2 roms
Im stuck now , and can not use the mobile network
Please Help!!
hazemsalah said:
Also while installing 4.1.2 VRAMC3 stock unrooted rom , the odin fails at modem.bin
I never took the 4.3 OTA
I can run the TWRP recovery and install custom roms [4.1.2 CleanROM V5] , but the baseband version is unknown and the network is not working , even i have installed VRAM3 Modem or VRALL4
Note: I have flashed the ND7 modem and MJ9ModemParam before while trying to install 4.4.2 roms
Im stuck now , and can not use the mobile network
Please Help!!
Click to expand...
Click to collapse
Go to General Section and look at the Data Corruption thread. Directions are there for flashing a Stock Recovery. Do a factory reset with stock recovery. Try that and report back..I have a flashable modem as well so let us know..
lacoursiere18 said:
Go to General Section and look at the Data Corruption thread. Directions are there for flashing a Stock Recovery. Do a factory reset with stock recovery. Try that and report back..I have a flashable modem as well so let us know..
Click to expand...
Click to collapse
I did , but still the same
i downloaded odin so i can fix the wifi issue on the rom 4.3 coming from 4.1.2 first time using odin on this laptop and i download it and everything and in the odin file i dont see pda???? to do the firmware fix ???
JamesCaywood said:
i downloaded odin so i can fix the wifi issue on the rom 4.3 coming from 4.1.2 first time using odin on this laptop and i download it and everything and in the odin file i dont see pda???? to do the firmware fix ???
Click to expand...
Click to collapse
Use the AP slot in Odin 3.09, PDA slot in older versions.
Sent from my SCH-I605
gr8nole said:
Use the AP slot in Odin 3.09, PDA slot in older versions.
Sent from my SCH-I605
Click to expand...
Click to collapse
alright i did that and it pass but my wifi still dont work ??? and i post to wip my rom then do it in odin ?
Just a question, did you flash the firmware 4.3 from Alliances rom page? Once you do that, then you go into the custom recovery and flash the Rom.
i want to use odin for flash i9300
is there any latest version of CM which can be flashed by odin? i meant tar file or any zip by odin.
if there is no how can i make it ?
thanks
AnGrY DuDe said:
i want to use odin for flash i9300
is there any latest version of CM which can be flashed by odin? i meant tar file or any zip by odin.
if there is no how can i make it ?
thanks
Click to expand...
Click to collapse
I think... there's some kind of.... confusion....
AnGrY DuDe said:
i want to use odin for flash i9300
is there any latest version of CM which can be flashed by odin? i meant tar file or any zip by odin.
if there is no how can i make it ?
thanks
Click to expand...
Click to collapse
Do you mean CWM recovery file
AnGrY DuDe said:
i want to use odin for flash i9300
is there any latest version of CM which can be flashed by odin? i meant tar file or any zip by odin.
if there is no how can i make it ?
thanks
Click to expand...
Click to collapse
If you have trouble installing a custom recovery and CM, just use the CM installer. I dont think you can install CM by Odin. CM installer is the easiest possible way to install CM.
Wrong section mate!
RazOne said:
Wrong section mate!
Click to expand...
Click to collapse
some of my friends ask me to give them guide to install CM .but they don't know how to do it by recovery
so i think best and easy way is odin for them its just click next.
here is CM by odin ... .. for s3 mini
http://novafusion.pl/downloads
but i need it for i9300
thanks
RazOne said:
Wrong section mate!
Click to expand...
Click to collapse
I'm sorry mate i didn't focus ..pls moderator move this to Question forum
I was trying to install TWRP from Google play store, and now my phone is stuck in Odin mode. It says "Can not do normal boot" no matter what I do. The phone is 4.4.4 stock ROM
What I want to do is stock ROM (Maybe 4.2 / 4.3 mj4 modem or so) and re-root it. Is there a stock ROM TAR file anywhere I can download?
And how exactly do I fix it?
Was it on nk4 kit Kat?
chico260 said:
Was it on nk4 kit Kat?
Click to expand...
Click to collapse
I'm pretty sure it was 4.4.4 but don't know if it was nk4
ZackFearheart said:
I'm pretty sure it was 4.4.4 but don't know if it was nk4
Click to expand...
Click to collapse
Here's nk4 tar .. stick in the "pda" tab on odin http://forum.xda-developers.com/showthread.php?p=47355107