Related
Ok, I am lost, I don't know what I'm doing wrong but I tried to install the latest XXDLI8 leak, and I am met with error 7 in CWM.
I even downloaded and flashed the needed PDA from sammobile (which is XXBLG8_XABLG8_XXLH1) but I still get error 7? The assert check fails on PreloadInstaller
What's the deal?
Did you flash root and the modem? LH1 IIRC?
Kangburra said:
Did you flash root and the modem? LH1 IIRC?
Click to expand...
Click to collapse
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Theshawty said:
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Click to expand...
Click to collapse
you need to flash this one: I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar
and then the lh1 modem separatly or you will get the error 7.
alirey said:
you need to flash this one: I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar
and then the lh1 modem separatly or you will get the error 7.
Click to expand...
Click to collapse
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Don't know why. But had the same problem. Error 7 seems to be an file checksum problem and separte flashing solves it.
Sent from my GT-I9300 using xda premium
Theshawty said:
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Click to expand...
Click to collapse
Was it a hotfile link?
For me it only works without flaws if I use the odin base that perka made. Now and the I do have hiccups with it though.
Kangburra said:
Did you flash root and the modem? LH1 IIRC?
Click to expand...
Click to collapse
Root is not really required to flash the OTA. However the Rom and the modem need to be flashed separately.
Sent from my GT-I9300
---------- Post added at 11:07 AM ---------- Previous post was at 11:04 AM ----------
Theshawty said:
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Click to expand...
Click to collapse
Don't use this Rom. This Rom seem to be corrupt. Instead download the LG8 Rom from goo.im and flash the LH1 modem separately.
Sent from my GT-I9300
pkoper said:
Was it a hotfile link? .
Click to expand...
Click to collapse
Indeed it was. I should have known better.
gillboyzz said:
Don't use this Rom. This Rom seem to be corrupt. Instead download the LG8 Rom from goo.im and flash the LH1 modem separately.
Sent from my GT-I9300
Click to expand...
Click to collapse
Will do.
EDIT: You mean the LG8 one Pulser has uploaded? http://goo.im/devs/pulser/GalaxyS3
Sammobile are linking to http://www.hotfile.com/dl/170853923/e311e2f/I9300XXBLG8_I9300OXABLG8_BTU.zip.html which still needs the LH1 modem flashed after the ROM flash.
It does work, but you have to flash the modem or you get the 7 error. As above the root steps are not needed, until after the OTA anyway.
Kangburra said:
Sammobile are linking to http://www.hotfile.com/dl/170853923/e311e2f/I9300XXBLG8_I9300OXABLG8_BTU.zip.html which still needs the LH1 modem flashed after the ROM flash.
It does work, but you have to flash the modem or you get the 7 error. As above the root steps are not needed, until after the OTA anyway.
Click to expand...
Click to collapse
The only reason I flash cf-root directly after odin'ing the stock ROM is to get CWM so I can flash the OTA.
Theshawty said:
Indeed it was. I should have known better.
Will do.
EDIT: You mean the LG8 one Pulser has uploaded? http://goo.im/devs/pulser/GalaxyS3
Click to expand...
Click to collapse
Nope..the original stock rom..just search with the first initials of the rom on goo
Sent from my GT-I9300
gillboyzz said:
Nope..the original stock rom..just search with the first initials of the rom on goo
Sent from my GT-I9300
Click to expand...
Click to collapse
Well I downloaded it and it seems like it's the "legit" LG8 one so I'll go with it.
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Theshawty said:
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Click to expand...
Click to collapse
So you odin flashed the base rom
then odin flashed cf-root
boot into cwm and flash LH1 and OTA (no reboot between) and error 7?
Weird. Something wrong with one of those files.
Theshawty said:
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Click to expand...
Click to collapse
Pls dont root until fully cooked. Here are my steps.
Do factory reset before flashing
Flash stock BLG8 rom through odin and restart.
On the startup screen where you choose the lang, dont proceed further. Just restrart in the download mode again.
Flash the LH1 modem through odin and restart and again on the startup screen restart the phone in recovery mode. Do factory reset and chose the OTA file flash through recovery. Let the upgarde complete. Dont reboot, just do factory reset again and enjoy the leak.
You may root now if required.
Sent from my GT-I9300
Theshawty said:
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Click to expand...
Click to collapse
I initially had the exact same problem .. so I downloaded the I9300BLG8 base Rom again , but the one without the LH1 modem built in and then flashed LH1 modem after flashing the base Rom. This sorted out my problem .. using this method has been working flawlessly ever since XXDLI4 for me .. worth a shot mate .
Sent from my GT-I9300 using xda app-developers app
Kangburra said:
So you odin flashed the base rom
then odin flashed cf-root
boot into cwm and flash LH1 and OTA (no reboot between) and error 7?
Weird. Something wrong with one of those files.
Click to expand...
Click to collapse
Those are the exact steps I took. None of the files seem borked either.
bazzazz said:
I initially had the exact same problem .. so I downloaded the I9300BLG8 base Rom again , but the one without the LH1 modem built in and then flashed LH1 modem after flashing the base Rom. This sorted out my problem .. using this method has been working flawlessly ever since XXDLI4 for me .. worth a shot mate .
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Same here, never used the one with the modem in it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
gillboyzz said:
Pls dont root until fully cooked. Here are my steps.
Do factory reset before flashing
Flash stock BLG8 rom through odin and restart.
On the startup screen where you choose the lang, dont proceed further. Just restrart in the download mode again.
Flash the LH1 modem through odin and restart and again on the startup screen restart the phone in recovery mode. Do factory reset and chose the OTA file flash through recovery. Let the upgarde complete. Dont reboot, just do factory reset again and enjoy the leak.
You may root now if required.
Sent from my GT-I9300
Click to expand...
Click to collapse
How do you get odin to flash an OTA file? I thought the whole point of the cf-root was to get to cwm? Did I miss something here?
Kangburra said:
Same here, never used the one with the modem in it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
How do you get odin to flash an OTA file? I thought the whole point of the cf-root was to get to cwm? Did I miss something here?
Click to expand...
Click to collapse
Nope.. you can't flash the ota file through odin. Refer to my steps above, once the modem is flashed through odin, you use tge stock recovery to flash the OTA
Sent from my GT-I9300
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1998205
has su binary but not sure about superuser app. I think its the stock kernel but I'm not sure... you can do this if its needed but maybe not needed http://forum.xda-developers.com/showthread.php?p=34180283#post34180283
I mention that because if you want to avoid the yellow triangle and have a kernel that flashes things you can use Mobile Odin or extract the zImage and use hc-ktool to flash the below kernel.
Kernel for flashing; no CWM app though, so need to hold power home and volume up on boot: http://forum.xda-developers.com/showthread.php?t=1877270
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
You're obviously also too lazy to search.
Just use Mobile Odin via your mobile, it will also re-root and inject SU etc anyway.
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
Just used odin 3.07 to flash the fw,or mobile odin, with everroot on it.
http://download.chainfire.eu/267/SuperSU/CWM-SuperSU-v0.97.zip after you flash the fw downlod this zip rename it to update.zip place it to your sdard apply update to the recovery(stock)apply update to externalstorage.done you are rooted or flash phils kernel.
Sent from my GT-I9100 using xda premium
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
There is one rooted version available which i downloaded ... I dont remember the thread though .. U have to search
Sent from my GT-I9100 using Tapatalk 2
Thread closed
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
This is the wrong forum to admit you're too lazy to do your own work.
Hi, i just bought my note 2 and ive already unlocked it and rooted it, i want to use a ROM that has 4.3 Jelly Bean like the N3BULA ROM, it says flash the MJ9 OTA Firmware using Odin. But on the forums there is a forum called "Once you're unlocked don't use odin to flash custom ROMs"
1. I should be able to flash the MJ9 using odin safely right because its not a custom rom right?
2. How do i flash the MJ9 update using odin?
3. Once i flash the MJ9 update can i still use non 4.3 ROM?
Question 1: You are correct.
Question 2: Download, then extract with 7zip. Put phone into download mode. Open Odin on computer and connect the phone. Place extracted md5 into the pda slot and hit start. It'll do it's thing and your phone will reboot and be done.
Question 3: Yes as long as don't take the OTA update from Samsung you will able load roms as usual
Once my phone is in download mode, odin doesn't recognize my phone. Any reason why ? I'm so frustrated
pacedrum69 said:
Once my phone is in download mode, odin doesn't recognize my phone. Any reason why ? I'm so frustrated
Click to expand...
Click to collapse
Check your drivers. If you've used casual, sometimes removing those drivers will help and by also installing updated Samsung drivers.
If you've done all of the above and it's still not recognized. I recommend trying a different USB cable.
Sent from my SCH-I605 using Tapatalk
synapsesboob said:
Check your drivers. If you've used casual, sometimes removing those drivers will help and by also installing updated Samsung drivers.
If you've done all of the above and it's still not recognized. I recommend trying a different USB cable.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Ive tried everything :-/ ugh
whn flashing in odin will a pit file also be needed (wana flash stock mj9)
I didn't need it..
Sent from my SCH-I605 / Galaxy Note 2 / JB 4.3 / Unlocked, Rooted and ROMed... using Tapatalk v 2.4.13
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
pacedrum69 said:
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Whats the problem? Does Odin Start doing it atleast??
pacedrum69 said:
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
sometimes it happen to me to,
if driver is not the issue, then try close the odin and unplugged the cable, plug it back then start odin.
Bonkurei said:
sometimes it happen to me to,
if driver is not the issue, then try close the odin and unplugged the cable, plug it back then start odin.
Click to expand...
Click to collapse
Info that may help: I searched here in xda not on this device or I'd post a link, for how to install Odin and found that for each Samsung device there are some set of Odin versions that are compatible. I used Odin just now (took less than a minute) version 3.07 for my phone. Note that my drivers were already installed and working since I unlocked the bootloader a year ago. For others: it simply rebooted afterwards and all is well.
Can anyone give me the download link for MJ9 OTA Firmware by Beans?
Thanks
Mr_Denni said:
Can anyone give me the download link for MJ9 OTA Firmware by Beans?
Thanks
Click to expand...
Click to collapse
Here's a link where you can grab the MJ9 firmware provided by Beanstown106... ( http://forum.xda-developers.com/showthread.php?t=2578458 ). Look down on the first post of the thread for the link to "Full Firmware Package" that you need to flash in Odin...that will bring you to the Android file host where you can download Beanstown106's file-- "toltevzw_mj9_official_firmware.tar.md5.7z."
Also, here's a link to a post with more detailed instructions on how to Odin flash it after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
Please make sure to do a thanks to BeansTown106 for the firmware file and to sithjedi333 for the helpful instructions.
Sent from my SCH-I605 using XDA Premium 4 mobile app
mattnmag said:
Here's a link where you can grab the MJ9 firmware provided by Beanstown106... ( http://forum.xda-developers.com/showthread.php?t=2578458 ). Look down on the first post of the thread for the link to "Full Firmware Package" that you need to flash in Odin...that will bring you to the Android file host where you can download Beanstown106's file-- "toltevzw_mj9_official_firmware.tar.md5.7z."
Also, here's a link to a post with more detailed instructions on how to Odin flash it after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
Please make sure to do a thanks to BeansTown106 for the firmware file and to sithjedi333 for the helpful instructions.
Click to expand...
Click to collapse
Thank you very much, bro for your links :good:
Hey guys instead of starting a new thread I thought I would ask here... I just bought a rooted note 2 on craigslist and it has the N3bula rom on it, but it is the first version. It is a little slow for me, so i wanna flash the N3bula 2 rom, but I am not sure if I have the MJ9 thing on my phone. Is there any way to check?
washburnky said:
Hey guys instead of starting a new thread I thought I would ask here... I just bought a rooted note 2 on craigslist and it has the N3bula rom on it, but it is the first version. It is a little slow for me, so i wanna flash the N3bula 2 rom, but I am not sure if I have the MJ9 thing on my phone. Is there any way to check?
Click to expand...
Click to collapse
settings > about device > look the baseband version it shoud say like this I605VRUEMJ9
but since its already run on N3bula i think its already on MJ9.
MJ9 Flashing failed
I tried to flash the MJ9 firmware many times through odin , but every time it fails on the modem.bin .... any ideas ?
hazemsalah said:
I tried to flash the MJ9 firmware many times through odin , but every time it fails on the modem.bin .... any ideas ?
Click to expand...
Click to collapse
Also while installing 4.1.2 VRAMC3 stock unrooted rom , the odin fails at modem.bin
I never took the 4.3 OTA
I can run the TWRP recovery and install custom roms [4.1.2 CleanROM V5] , but the baseband version is unknown and the network is not working , even i have installed VRAM3 Modem or VRALL4
Note: I have flashed the ND7 modem and MJ9ModemParam before while trying to install 4.4.2 roms
Im stuck now , and can not use the mobile network
Please Help!!
hazemsalah said:
Also while installing 4.1.2 VRAMC3 stock unrooted rom , the odin fails at modem.bin
I never took the 4.3 OTA
I can run the TWRP recovery and install custom roms [4.1.2 CleanROM V5] , but the baseband version is unknown and the network is not working , even i have installed VRAM3 Modem or VRALL4
Note: I have flashed the ND7 modem and MJ9ModemParam before while trying to install 4.4.2 roms
Im stuck now , and can not use the mobile network
Please Help!!
Click to expand...
Click to collapse
Go to General Section and look at the Data Corruption thread. Directions are there for flashing a Stock Recovery. Do a factory reset with stock recovery. Try that and report back..I have a flashable modem as well so let us know..
lacoursiere18 said:
Go to General Section and look at the Data Corruption thread. Directions are there for flashing a Stock Recovery. Do a factory reset with stock recovery. Try that and report back..I have a flashable modem as well so let us know..
Click to expand...
Click to collapse
I did , but still the same
Can anybody give me kitkat kernel for locked bootloaders to flash via odin cause i have a problem of charging while my phone is off ... The phone turns on automatically when i plug in the charger .. pLease help
ahmed.zubair said:
Can anybody give me kitkat kernel for locked bootloaders to flash via odin cause i have a problem of charging while my phone is off ... The phone turns on automatically when i plug in the charger .. pLease help
Click to expand...
Click to collapse
What rom are you running. Are you mdk or safestrap?
sent by safestrap powered echo v26
Safestrap . I am running the jrkruse stock intl rom .. the problem remains the same I have changed the roms .. it wasnt there when I was on 4.3 mj7
ahmed.zubair said:
Safestrap . I am running the jrkruse stock intl rom .. the problem remains the same I have changed the roms .. it wasnt there when I was on 4.3 mj7
Click to expand...
Click to collapse
Have you tried any other SS compatible roms?
sent by safestrap powered echo v26
Yes I have tried about 4,5 roms its not the rom its the kernel . Which is doing some problem
You can just flash the boot.img section of the nc5 Odin tar
joshm.1219 said:
You can just flash the boot.img section of the nc5 Odin tar
Click to expand...
Click to collapse
Can u post a link .. ??
ahmed.zubair said:
Can u post a link .. ??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2735172
[ODIN][TAR] I545VRUFNC5 Factory and No-Wipe Odin tars
joshm.1219 said:
http://forum.xda-developers.com/showthread.php?t=2735172
[ODIN][TAR] I545VRUFNC5 Factory and No-Wipe Odin tars
Click to expand...
Click to collapse
but these are the full odin tars .. how can i just flash a kernel from that ? i didnt get u sir
When you extract the tar there's different files, the boot.img is the kernel and can be flashed in odin
joshm.1219 said:
When you extract the tar there's different files, the boot.img is the kernel and can be flashed in odin
Click to expand...
Click to collapse
I ve got it .... Hitted the thanx ..:silly:
Hello
I want to install KitKat Rom Stock on
Galaxy Grand 2.
( and please give me the link of drivers that need to this work )
Thanks
All your need is odin 3.0.7 lf above, for driver if you're use win7..it will automatically install when you put your phone via usb cabble
OrdinaryNoob
SH1M4BD3 said:
All your need is odin 3.0.7 lf above, for driver if you're use win7..it will automatically install when you put your phone via usb cabble
OrdinaryNoob
Click to expand...
Click to collapse
Thanks.
Odin 3.09 and 3.10 have been released.
But I don't have them.
Please Give me it's link
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Make sure you follow every instruction, never check repatition,
OrdinaryNoob
SH1M4BD3 said:
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Make sure you follow every instruction, never check repatition,
OrdinaryNoob
Click to expand...
Click to collapse
Thanks.
Which one of odin multidownload is for my work ??? ( I downloaded odin 3.09 but don't download odin multidownload !!! )
Wgat did you means, if you wanna flash the newer firmware, make sure that you have the firmware you can download it from sammobile.com, its about 1,5gb ziped files, extract that zip, put your phone in download mode,vontinue with odin 3.0.7 or above, you can find it in easy way just google it mate.
OrdinaryNoob
SH1M4BD3 said:
Wgat did you means, if you wanna flash the newer firmware, make sure that you have the firmware you can download it from sammobile.com, its about 1,5gb ziped files, extract that zip, put your phone in download mode,vontinue with odin 3.0.7 or above, you can find it in easy way just google it mate.
OrdinaryNoob
Click to expand...
Click to collapse
It's size is about 1.2 GB.
But I read in a site that This KitKat Rom Need odin 3.09
Extract that zip, no need to worry i flashed so many grand 2 and its ok even wit 3.0.7..put that extracted files in PDA option.. When it loaded hit start button, wait till finish(passed) and youre done
OrdinaryNoob
SH1M4BD3 said:
Extract that zip, no need to worry i flashed so many grand 2 and its ok even wit 3.0.7..put that extracted files in PDA option.. When it loaded hit start button, wait till finish(passed) and youre done
OrdinaryNoob
Click to expand...
Click to collapse
Thanks.
Are you sure that O do not need any drivers ?
After that how can I root it ?
Is kitkat better than jelly bean for this phone ???
or android 4.3 is enough for me ???
Do I need any drivers ?
Hello?
Ahmad.S9675 said:
Is kitkat better than jelly bean for this phone ???
or android 4.3 is enough for me ???
Do I need any drivers ?
Click to expand...
Click to collapse
I think jelly bean is better coz KitKat is having problems in every update and games also lag very much ... these are just my views it depends on you to update or not however you can't downgrade after you have upgraded