Ok, I am lost, I don't know what I'm doing wrong but I tried to install the latest XXDLI8 leak, and I am met with error 7 in CWM.
I even downloaded and flashed the needed PDA from sammobile (which is XXBLG8_XABLG8_XXLH1) but I still get error 7? The assert check fails on PreloadInstaller
What's the deal?
Did you flash root and the modem? LH1 IIRC?
Kangburra said:
Did you flash root and the modem? LH1 IIRC?
Click to expand...
Click to collapse
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Theshawty said:
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Click to expand...
Click to collapse
you need to flash this one: I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar
and then the lh1 modem separatly or you will get the error 7.
alirey said:
you need to flash this one: I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar
and then the lh1 modem separatly or you will get the error 7.
Click to expand...
Click to collapse
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Don't know why. But had the same problem. Error 7 seems to be an file checksum problem and separte flashing solves it.
Sent from my GT-I9300 using xda premium
Theshawty said:
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Click to expand...
Click to collapse
Was it a hotfile link?
For me it only works without flaws if I use the odin base that perka made. Now and the I do have hiccups with it though.
Kangburra said:
Did you flash root and the modem? LH1 IIRC?
Click to expand...
Click to collapse
Root is not really required to flash the OTA. However the Rom and the modem need to be flashed separately.
Sent from my GT-I9300
---------- Post added at 11:07 AM ---------- Previous post was at 11:04 AM ----------
Theshawty said:
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Click to expand...
Click to collapse
Don't use this Rom. This Rom seem to be corrupt. Instead download the LG8 Rom from goo.im and flash the LH1 modem separately.
Sent from my GT-I9300
pkoper said:
Was it a hotfile link? .
Click to expand...
Click to collapse
Indeed it was. I should have known better.
gillboyzz said:
Don't use this Rom. This Rom seem to be corrupt. Instead download the LG8 Rom from goo.im and flash the LH1 modem separately.
Sent from my GT-I9300
Click to expand...
Click to collapse
Will do.
EDIT: You mean the LG8 one Pulser has uploaded? http://goo.im/devs/pulser/GalaxyS3
Sammobile are linking to http://www.hotfile.com/dl/170853923/e311e2f/I9300XXBLG8_I9300OXABLG8_BTU.zip.html which still needs the LH1 modem flashed after the ROM flash.
It does work, but you have to flash the modem or you get the 7 error. As above the root steps are not needed, until after the OTA anyway.
Kangburra said:
Sammobile are linking to http://www.hotfile.com/dl/170853923/e311e2f/I9300XXBLG8_I9300OXABLG8_BTU.zip.html which still needs the LH1 modem flashed after the ROM flash.
It does work, but you have to flash the modem or you get the 7 error. As above the root steps are not needed, until after the OTA anyway.
Click to expand...
Click to collapse
The only reason I flash cf-root directly after odin'ing the stock ROM is to get CWM so I can flash the OTA.
Theshawty said:
Indeed it was. I should have known better.
Will do.
EDIT: You mean the LG8 one Pulser has uploaded? http://goo.im/devs/pulser/GalaxyS3
Click to expand...
Click to collapse
Nope..the original stock rom..just search with the first initials of the rom on goo
Sent from my GT-I9300
gillboyzz said:
Nope..the original stock rom..just search with the first initials of the rom on goo
Sent from my GT-I9300
Click to expand...
Click to collapse
Well I downloaded it and it seems like it's the "legit" LG8 one so I'll go with it.
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Theshawty said:
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Click to expand...
Click to collapse
So you odin flashed the base rom
then odin flashed cf-root
boot into cwm and flash LH1 and OTA (no reboot between) and error 7?
Weird. Something wrong with one of those files.
Theshawty said:
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Click to expand...
Click to collapse
Pls dont root until fully cooked. Here are my steps.
Do factory reset before flashing
Flash stock BLG8 rom through odin and restart.
On the startup screen where you choose the lang, dont proceed further. Just restrart in the download mode again.
Flash the LH1 modem through odin and restart and again on the startup screen restart the phone in recovery mode. Do factory reset and chose the OTA file flash through recovery. Let the upgarde complete. Dont reboot, just do factory reset again and enjoy the leak.
You may root now if required.
Sent from my GT-I9300
Theshawty said:
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Click to expand...
Click to collapse
I initially had the exact same problem .. so I downloaded the I9300BLG8 base Rom again , but the one without the LH1 modem built in and then flashed LH1 modem after flashing the base Rom. This sorted out my problem .. using this method has been working flawlessly ever since XXDLI4 for me .. worth a shot mate .
Sent from my GT-I9300 using xda app-developers app
Kangburra said:
So you odin flashed the base rom
then odin flashed cf-root
boot into cwm and flash LH1 and OTA (no reboot between) and error 7?
Weird. Something wrong with one of those files.
Click to expand...
Click to collapse
Those are the exact steps I took. None of the files seem borked either.
bazzazz said:
I initially had the exact same problem .. so I downloaded the I9300BLG8 base Rom again , but the one without the LH1 modem built in and then flashed LH1 modem after flashing the base Rom. This sorted out my problem .. using this method has been working flawlessly ever since XXDLI4 for me .. worth a shot mate .
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Same here, never used the one with the modem in it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
gillboyzz said:
Pls dont root until fully cooked. Here are my steps.
Do factory reset before flashing
Flash stock BLG8 rom through odin and restart.
On the startup screen where you choose the lang, dont proceed further. Just restrart in the download mode again.
Flash the LH1 modem through odin and restart and again on the startup screen restart the phone in recovery mode. Do factory reset and chose the OTA file flash through recovery. Let the upgarde complete. Dont reboot, just do factory reset again and enjoy the leak.
You may root now if required.
Sent from my GT-I9300
Click to expand...
Click to collapse
How do you get odin to flash an OTA file? I thought the whole point of the cf-root was to get to cwm? Did I miss something here?
Kangburra said:
Same here, never used the one with the modem in it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
How do you get odin to flash an OTA file? I thought the whole point of the cf-root was to get to cwm? Did I miss something here?
Click to expand...
Click to collapse
Nope.. you can't flash the ota file through odin. Refer to my steps above, once the modem is flashed through odin, you use tge stock recovery to flash the OTA
Sent from my GT-I9300
Related
Dear all,
I want to use CWM Recovery Mode, to flash a new ROM but ended with this message 'can't access to \system\csc\AVI\system'.
Anyone knows what happened here? and how to fix it so i can flash it. Thanks
What rom sounds like a corrupt rom .
jje
JJEgan said:
What rom sounds like a corrupt rom .
jje
Click to expand...
Click to collapse
It's Litening ROM V2.1.
Want to flash it to V2.2 via CWM, but the message apperared even before it's flashing.
varenathan said:
It's Litening ROM V2.1.
Want to flash it to V2.2 via CWM, but the message apperared even before it's flashing.
Click to expand...
Click to collapse
Why don't you try flshing a cf-root manually using ODIN and then flashing v2.2
kryptoner said:
Why don't you try flshing a cf-root manually using ODIN and then flashing v2.2
Click to expand...
Click to collapse
I did flash a CF-ROOT manually, XX_OXA_KG1, using ODIN.
The file from here : http://forum.xda-developers.com/showthread.php?t=1103399
I did flash the last ROM using ODIN (from V1.5 to V2.0). But for V2.1, i flashed it using CWM, goes the same with V2.2.
varenathan said:
I did flash a CF-ROOT manually, XX_OXA_KG1, using ODIN.
The file from here : http://forum.xda-developers.com/showthread.php?t=1103399
I did flash the last ROM using ODIN (from V1.5 to V2.0). But for V2.1, i flashed it using CWM, goes the same with V2.2.
Click to expand...
Click to collapse
You've done everything correctly, better if you ask this in litening rom thread...or maybe wait for 2.3, if it comes as a full rom, it would be great
kryptoner said:
You've done everything correctly, better if you ask this in litening rom thread...or maybe wait for 2.3, if it comes as a full rom, it would be great
Click to expand...
Click to collapse
thanks Kryptoner, but unfortunately i still can not post anything to the ROM thread, i haven't got any permisison from Mods. I wish someone could really post the same problem with me, and i could find the same solution. Don't want to wipe the data (like i have read in other forums if can't flash a new ROM or updated the ROM with CWM)
please help.
Could someone help me? I would appreciate it. Thanks
Did you try to download the rom again?
varenathan said:
It's Litening ROM V2.1.
Want to flash it to V2.2 via CWM, but the message apperared even before it's flashing.
Click to expand...
Click to collapse
Can 2.2 be flashed via CWM .
Page one of the rom posts says flash via ODIN unless you have different instructions its a user error .
jje
Hey Guys Please Help Me
I was running rootbox rom 1.7 then i decided to factory reset and erase sd card from the phone i did it and when i rebooted the phone it was stuck at the galaxy s2 boot screen and then a black screen comes i tried to open the recovery but it also do the same problem
mo7ammed3adel said:
Hey Guys Please Help Me
I was running rootbox rom 1.7 then i decided to factory reset and erase sd card from the phone i did it and when i rebooted the phone it was stuck at the galaxy s2 boot screen and then a black screen comes i tried to open the recovery but it also do the same problem
Click to expand...
Click to collapse
Can you get into download mode?
kilometers4 said:
Can you get into download mode?
Click to expand...
Click to collapse
Yes
thanks for the reply
mo7ammed3adel said:
Yes
thanks for the reply
Click to expand...
Click to collapse
Good, then you can follow up with what he is hinting at . Flash the original firmware back on it and continue from there
Syrellaris said:
Good, then you can follow up with what he is hinting at . Flash the original firmware back on it and continue from there
Click to expand...
Click to collapse
sorry i am a noob
but i can get any original firmware or according to my region ?
i logged in to sam mobile and i found many firmwares choose any one of the ?
thanks for the reply
sam mobile should have the original firmware for your region. the latest and the older ones I believe. Any original and official firmware, even older ones should work fine. You could always update back to the latest official one using kies once your phone works again.
Alternatively you can check http://forum.xda-developers.com/showthread.php?t=1075278 for your region specific firmware. Just follow the intstruction of flashing with odin and it should be fine.
Syrellaris said:
sam mobile should have the original firmware for your region. the latest and the older ones I believe. Any original and official firmware, even older ones should work fine. You could always update back to the latest official one using kies once your phone works again.
Alternatively you can check http://forum.xda-developers.com/showthread.php?t=1075278 for your region specific firmware. Just follow the intstruction of flashing with odin and it should be fine.
Click to expand...
Click to collapse
Thanks mate
do i have to download the kernel ?/
The entire firmware info package you can download from the XDA thread has the kernel already. The Stock kernel download is just to reflash the kernel in say errors with kernels or if you flashed a CF-root kernel and want it back to original. Follow the instructions in the opening post regarding to flashing with Odin completely.
Syrellaris said:
The entire firmware info package you can download from the XDA thread has the kernel already. The Stock kernel download is just to reflash the kernel in say errors with kernels or if you flashed a CF-root kernel and want it back to original. Follow the instructions in the opening post regarding to flashing with Odin completely.
Click to expand...
Click to collapse
Thanks i downloaded the firmware from sam mobile and flashed it using odin
i booted into the recovery and wiped data and cache partition and my phone came back to life
mo7ammed3adel said:
Thanks i downloaded the firmware from sam mobile and flashed it using odin
i booted into the recovery and wiped data and cache partition and my phone came back to life
Click to expand...
Click to collapse
Awsome As long as you read the threads carefully over here on XDA regarding flashing roms and kernels and stuff you will do fine Just follow the instructions
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1998205
has su binary but not sure about superuser app. I think its the stock kernel but I'm not sure... you can do this if its needed but maybe not needed http://forum.xda-developers.com/showthread.php?p=34180283#post34180283
I mention that because if you want to avoid the yellow triangle and have a kernel that flashes things you can use Mobile Odin or extract the zImage and use hc-ktool to flash the below kernel.
Kernel for flashing; no CWM app though, so need to hold power home and volume up on boot: http://forum.xda-developers.com/showthread.php?t=1877270
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
You're obviously also too lazy to search.
Just use Mobile Odin via your mobile, it will also re-root and inject SU etc anyway.
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
Just used odin 3.07 to flash the fw,or mobile odin, with everroot on it.
http://download.chainfire.eu/267/SuperSU/CWM-SuperSU-v0.97.zip after you flash the fw downlod this zip rename it to update.zip place it to your sdard apply update to the recovery(stock)apply update to externalstorage.done you are rooted or flash phils kernel.
Sent from my GT-I9100 using xda premium
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
There is one rooted version available which i downloaded ... I dont remember the thread though .. U have to search
Sent from my GT-I9100 using Tapatalk 2
Thread closed
sasukewa said:
Does anyone know where there is the current leaked JB 4.1.2 that is in CWM. Just too lazy to use ODIN and having to root the phone all over again. Thx.
Click to expand...
Click to collapse
This is the wrong forum to admit you're too lazy to do your own work.
Hi, i just bought my note 2 and ive already unlocked it and rooted it, i want to use a ROM that has 4.3 Jelly Bean like the N3BULA ROM, it says flash the MJ9 OTA Firmware using Odin. But on the forums there is a forum called "Once you're unlocked don't use odin to flash custom ROMs"
1. I should be able to flash the MJ9 using odin safely right because its not a custom rom right?
2. How do i flash the MJ9 update using odin?
3. Once i flash the MJ9 update can i still use non 4.3 ROM?
Question 1: You are correct.
Question 2: Download, then extract with 7zip. Put phone into download mode. Open Odin on computer and connect the phone. Place extracted md5 into the pda slot and hit start. It'll do it's thing and your phone will reboot and be done.
Question 3: Yes as long as don't take the OTA update from Samsung you will able load roms as usual
Once my phone is in download mode, odin doesn't recognize my phone. Any reason why ? I'm so frustrated
pacedrum69 said:
Once my phone is in download mode, odin doesn't recognize my phone. Any reason why ? I'm so frustrated
Click to expand...
Click to collapse
Check your drivers. If you've used casual, sometimes removing those drivers will help and by also installing updated Samsung drivers.
If you've done all of the above and it's still not recognized. I recommend trying a different USB cable.
Sent from my SCH-I605 using Tapatalk
synapsesboob said:
Check your drivers. If you've used casual, sometimes removing those drivers will help and by also installing updated Samsung drivers.
If you've done all of the above and it's still not recognized. I recommend trying a different USB cable.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Ive tried everything :-/ ugh
whn flashing in odin will a pit file also be needed (wana flash stock mj9)
I didn't need it..
Sent from my SCH-I605 / Galaxy Note 2 / JB 4.3 / Unlocked, Rooted and ROMed... using Tapatalk v 2.4.13
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
pacedrum69 said:
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Whats the problem? Does Odin Start doing it atleast??
pacedrum69 said:
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
sometimes it happen to me to,
if driver is not the issue, then try close the odin and unplugged the cable, plug it back then start odin.
Bonkurei said:
sometimes it happen to me to,
if driver is not the issue, then try close the odin and unplugged the cable, plug it back then start odin.
Click to expand...
Click to collapse
Info that may help: I searched here in xda not on this device or I'd post a link, for how to install Odin and found that for each Samsung device there are some set of Odin versions that are compatible. I used Odin just now (took less than a minute) version 3.07 for my phone. Note that my drivers were already installed and working since I unlocked the bootloader a year ago. For others: it simply rebooted afterwards and all is well.
Can anyone give me the download link for MJ9 OTA Firmware by Beans?
Thanks
Mr_Denni said:
Can anyone give me the download link for MJ9 OTA Firmware by Beans?
Thanks
Click to expand...
Click to collapse
Here's a link where you can grab the MJ9 firmware provided by Beanstown106... ( http://forum.xda-developers.com/showthread.php?t=2578458 ). Look down on the first post of the thread for the link to "Full Firmware Package" that you need to flash in Odin...that will bring you to the Android file host where you can download Beanstown106's file-- "toltevzw_mj9_official_firmware.tar.md5.7z."
Also, here's a link to a post with more detailed instructions on how to Odin flash it after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
Please make sure to do a thanks to BeansTown106 for the firmware file and to sithjedi333 for the helpful instructions.
Sent from my SCH-I605 using XDA Premium 4 mobile app
mattnmag said:
Here's a link where you can grab the MJ9 firmware provided by Beanstown106... ( http://forum.xda-developers.com/showthread.php?t=2578458 ). Look down on the first post of the thread for the link to "Full Firmware Package" that you need to flash in Odin...that will bring you to the Android file host where you can download Beanstown106's file-- "toltevzw_mj9_official_firmware.tar.md5.7z."
Also, here's a link to a post with more detailed instructions on how to Odin flash it after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
Please make sure to do a thanks to BeansTown106 for the firmware file and to sithjedi333 for the helpful instructions.
Click to expand...
Click to collapse
Thank you very much, bro for your links :good:
Hey guys instead of starting a new thread I thought I would ask here... I just bought a rooted note 2 on craigslist and it has the N3bula rom on it, but it is the first version. It is a little slow for me, so i wanna flash the N3bula 2 rom, but I am not sure if I have the MJ9 thing on my phone. Is there any way to check?
washburnky said:
Hey guys instead of starting a new thread I thought I would ask here... I just bought a rooted note 2 on craigslist and it has the N3bula rom on it, but it is the first version. It is a little slow for me, so i wanna flash the N3bula 2 rom, but I am not sure if I have the MJ9 thing on my phone. Is there any way to check?
Click to expand...
Click to collapse
settings > about device > look the baseband version it shoud say like this I605VRUEMJ9
but since its already run on N3bula i think its already on MJ9.
MJ9 Flashing failed
I tried to flash the MJ9 firmware many times through odin , but every time it fails on the modem.bin .... any ideas ?
hazemsalah said:
I tried to flash the MJ9 firmware many times through odin , but every time it fails on the modem.bin .... any ideas ?
Click to expand...
Click to collapse
Also while installing 4.1.2 VRAMC3 stock unrooted rom , the odin fails at modem.bin
I never took the 4.3 OTA
I can run the TWRP recovery and install custom roms [4.1.2 CleanROM V5] , but the baseband version is unknown and the network is not working , even i have installed VRAM3 Modem or VRALL4
Note: I have flashed the ND7 modem and MJ9ModemParam before while trying to install 4.4.2 roms
Im stuck now , and can not use the mobile network
Please Help!!
hazemsalah said:
Also while installing 4.1.2 VRAMC3 stock unrooted rom , the odin fails at modem.bin
I never took the 4.3 OTA
I can run the TWRP recovery and install custom roms [4.1.2 CleanROM V5] , but the baseband version is unknown and the network is not working , even i have installed VRAM3 Modem or VRALL4
Note: I have flashed the ND7 modem and MJ9ModemParam before while trying to install 4.4.2 roms
Im stuck now , and can not use the mobile network
Please Help!!
Click to expand...
Click to collapse
Go to General Section and look at the Data Corruption thread. Directions are there for flashing a Stock Recovery. Do a factory reset with stock recovery. Try that and report back..I have a flashable modem as well so let us know..
lacoursiere18 said:
Go to General Section and look at the Data Corruption thread. Directions are there for flashing a Stock Recovery. Do a factory reset with stock recovery. Try that and report back..I have a flashable modem as well so let us know..
Click to expand...
Click to collapse
I did , but still the same
G935AUCS4BRD1 Firmware
ODIN FIRMWARE
G930AUCS4BRD1_7.0_4File_USA (AT&T).7z
OREO UPDATE CRE4
SS-G930AUCS4BRD1-to-U4CRE4-UP.zip
Flash G930AUCS4BRD1 with above odin
Place SS-G930AUCS4BRD1-to-U4CRE4-UP.zip on your SdCard
Reboot Phone to recovery choose install update and select SS-G935AUCS4BRC1-to-U4CRE4-UP.zip
Install and will take about 30 minutes or more
G935AUCS4BRC1 Firmware
ODIN FIRMWARE
G930AUCS4BRC1_7.0_4File_USA (AT&T).7z
OREO UPDATE CRE4
SS-G930AUCS4BRC1-to-U4CRE4-UP.zip
Flash G930AUCS4BRC1 with above odin
Place SS-G930AUCS4BRC1-to-U4CRE4-UP.zip on your SdCard
Reboot Phone to recovery choose install update and select SS-G935AUCS4BRC1-to-U4CRE4-UP.zip
Install and will take about 30 minutes or more
Odin Patche 3.13
View attachment Odin3_v3.13.1_3B_PatcheD.zip
THANKS
@FatalONEM8 For Update zips
that such a friend I am very new to this and I can not update to android 8 using SD CARD U4CRE4 gives me an error when I want to apply the update
danny1artereal said:
that such a friend I am very new to this and I can not update to android 8 using SD CARD U4CRE4 gives me an error when I want to apply the update
Click to expand...
Click to collapse
You have too flash the firmware in the OP before you can flash update
Can you help me telling me how to do it please friend
danny1artereal said:
Can you help me telling me how to do it please friend
Click to expand...
Click to collapse
I'm sure a Google search will yield you lists of how too guides
I have seen a rom you have made with safestrap but can't find it right now can you explain how to use and were it is located for download , I understand we should have capabilities of using features like twrp recovery with locked bootloaders
Question, does this work with Cricket? Anyone flashed it and gotten it to work?
jrkruse said:
I'm sure a Google search will yield you lists of how too guides
Click to expand...
Click to collapse
Can u provide me a bra1 to brc1 sideload update for g930a firmware not able to get update saying software up to date
miko12312 said:
Can u provide me a bra1 to brc1 sideload update for g930a firmware not able to get update saying software up to date
Click to expand...
Click to collapse
Everything you need is in post 1 you flash BRD1 firmware in odin put the update zip on your sd card and flash in stock recovery
jrkruse said:
Everything you need is in post 1 you flash BRD1 firmware in odin put the update zip on your sd card and flash in stock recovery
Click to expand...
Click to collapse
I know how to do that I'm on bra1 but don't want to reflash firmware again to update just and update zip from bra1 to brd1 it's not updating there was a file on afh but I can't find it
jrkruse said:
G935AUCS4BRD1
THANKS
@FatalONEM8 For Update zips
Click to expand...
Click to collapse
Thank you guys for sharingthese!h
Is CRE4 the current leak?
SamGuy2020 said:
Thank you guys for sharingthese!h
Is CRE4 the current leak?
Click to expand...
Click to collapse
It was a leak now its official build
Odin
Noob Question.
Do we flash the "ODIN FIRMWARE G930AUCS4BRD1_7.0_4File_USA (AT&T).7z" in the AP of odin?
faratl said:
Noob Question.
Do we flash the "ODIN FIRMWARE G930AUCS4BRD1_7.0_4File_USA (AT&T).7z" in the AP of odin?
Click to expand...
Click to collapse
Need to extract files and extract again till u get a .tar file each file will be labeled to what needs to be flash ap,bl ,cp,csc
---------- Post added at 10:06 PM ---------- Previous post was at 10:05 PM ----------
faratl said:
Noob Question.
Do we flash the "ODIN FIRMWARE G930AUCS4BRD1_7.0_4File_USA (AT&T).7z" in the AP of odin?
Click to expand...
Click to collapse
Also must use latest Odin or will get device mismatch
I uploaded Oreo odin firmware for yall..
JUSMEJOSE said:
I uploaded Oreo odin firmware for yall..
Click to expand...
Click to collapse
That will help. Thanks to you posting Odin files I was able to make att oreo rom
Can this be rooted?
gregg1110 said:
Can this be rooted?
Click to expand...
Click to collapse
No
How long should this update method take? Been stuck on "Patching system files..." for about an hour. Trying to determine if this is normal or not.
Edit: Nevermind. 15 Minutes later it booted. Guess I just needed to be more patient.
I'm hoping that we get this for Cricket Soon. Any way to get it to work for that carrier?