Hello, I have a problem, I'm back in Recorvery mod
There is a message on the watch: Now send the package ....
but I can not seem to get out of this mode has no send command ADB.
thank you
welcome back, yes already, I find even by me and so I did share in case someone find myself in the same situation:
of below the clock there like a gray screw, in fact you have to press this button a second with a pen and magic shows the reboot.
@ +
Related
Hi.. please know that a) I am a complete beginner at all things 'Forums' and programming mobile 'phones and b) hand on heart I have searched everywhere as your video states and 5 hours later I am still stuck... sooooo:
I have a Samsung Galaxy S2 XWKI8 which I got through 3. I am trying to root my phone BUT in order to start I need to re-boot in download mode - problem... my phone will not respond to the three button press action and just happily starts up as normal. Any ideas? I did, just once earlier to day get a screen with yellow and green writing but no yellow triangle. I went to reload but my eventual odin message said succeed 0/failed 0 and my phone didn't re-boot either. My main problem is that I just can't get my phone to re-boot. Can you help?
Try the three button combo again, but hold volume down and power at the same time then press the menu button, as soon as you see the Samsung splash screen, let go of all three. Works for me. If not then you could always buy a USB Jig from ebay.
Hope this helps.
Edit: To get a reboot, try removing the battery, then power up as normal.
Thank you so much for responding. I'll give it a go and let you know - THANK YOU
No... sadly it's not working - weird. I seem to get the Samsung Galaxy version screen come up twice and then the '3' logo and then a rainbow 'S' - it all takes a bit of a while! Would paying for an unlock service be a better idea?? OR... what is a JIG and what does one do with it...!
Strange...you should be able to get into download mode?
Does your phone boot up so that you can use the phone or are you stuck at the bootscreen (rainbow S).
You should not need to pay to get your phone unlocked there are plenty of resources and help on here to unlock it.
The USB jig boots your phone into download mode and resets the ROM flash counter so that if you have to return your phone to Sammy, they won't know you have flashed a custom ROM.
Try searching for other threads regarding 'not being able to get into download mode', you may find someone else has had the same problem.
Hi there,
I'm wondering if someone could help me.
On my Tab Im pressing the power down and volumn down but i'm unable to get into download mode .
I see the menu (with the two icons)
but it just goes pass this soo quickly that its only up for .3 of sec if that!
afterwards it just boots into the OS as normal.
Anyone got any ideas how i can fix this?
Regards
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
let go of power... still holding volume when you see the samsung tab screen popup.... I have asked the person to update the guide. Release power, problem solved.
Tiger33 said:
Hi there,
I'm wondering if someone could help me.
On my Tab Im pressing the power down and volumn down but i'm unable to get into download mode .
I see the menu (with the two icons)
but it just goes pass this soo quickly that its only up for .3 of sec if that!
afterwards it just boots into the OS as normal.
Anyone got any ideas how i can fix this?
Regards
Click to expand...
Click to collapse
You can do this through adb mode if you have. Go to adb shell and type :
reboot recovery -> for recovery mode
reboot download -> for download mode.
Tiger33 said:
Hi there,
I'm wondering if someone could help me.
On my Tab Im pressing the power down and volumn down but i'm unable to get into download mode .
I see the menu (with the two icons)
but it just goes pass this soo quickly that its only up for .3 of sec if that!
afterwards it just boots into the OS as normal.
Anyone got any ideas how i can fix this?
Regards
Click to expand...
Click to collapse
Did you get it to work? The previous two posts are definitely the best way, but there might be other ways if you are still having trouble.
Hallo I wont to root that tablet i push power and v+ and then only see broking android image and nathing else pleas help me i wont give this tablet to my son but i cant put in setup bicose he wonts a password and i dont now what ist that:crying: :crying:
No worries
woren said:
Hallo I wont to root that tablet i push power and v+ and then only see broking android image and nathing else pleas help me i wont give this tablet to my son but i cant put in setup bicose he wonts a password and i dont now what ist that:crying: :crying:
Click to expand...
Click to collapse
You have to reset it so find small hole marked RESET on the back of the device and whit thin object just type reset for a few seconds and then turn on the device then wait few minutes and will be well
Binatone appstar
Hi, my neighbour has asked if i could help with this binatone appstar 7 inch tablet. They have had it for sometime now but as the kids have now got proper android tablets they have all forgotten the pin number to access the tablet.
I have tried to reset the devise by pressing a pin into the reset hole on the back, holding it there or 10 seconds then letting it boot up as normal but it still requires a pin number to go further.
I tried to enter recovery mode so i could do a factory reset/wipe but thats a no go because...
I hold down vol + & power, as the appstar boot logo appears i let go of the power, after a short while the screen changes to an android upright with a blue hexagon behind it but then in an instant that changes to an android on its back with its belly open and a red triangle and exclamation mark. After that i am unable to do anything.
Hopefully someone might beable to help with this. So thank you in advance
A Solution for you all
I have a solution for this problem, if the parents password is lost/forgotten just enter into the password box exactly:
Code:
1orEnt=
This is tested and working on the AppStar 7" tablet from Binatone.
Say thanks if this helped you
PM
This only works on the settings not on parent mode and that is wha I'm locked out of ...any ideas ?
Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
Good day! how did you manage to boot into Recovery Mode or Fast Mode?
After pressing the power button and seeing the display turn on. Keep spamming the power button and a menu will pop-up on screen with boot options. Short press of the power button cycles through the options, long press selects the option.
Mine was also stuck on a boot loop, even though I had not played around with any settings or tried to root etc. I was able to revive it by going into recovery mode and doing a factory reset.
Hey OP I've got hold of the same tablet I'm working on getting a rom dump atm. Bare with me I'll try and send a link for the img. If u can get into recovery mode where u can update zip. That's good if not try and via pc. Once u have a link to the tablets boatloader, rest is history.
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
bump please
ozviewer said:
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
Click to expand...
Click to collapse
not working in my pendotab window 8
Hi,
I could get no further with mine, the same as you.
I contacted Pendo Support, and explained it would work but not boot, I even asked for the image file so I could reload it in recovery mode, however, they did not have access to it, the Chinese manufacturer had not made it available to them.
As I described it was not damaged, but simply not working, they agreed to send me a replacement, even though it was out of warranty, as really, as I said to them, it was not fit for purpose.
I had to send the old one back, but they sent me a satchel in which to do so, at no cost to me.
They sent me the new one very promptly.
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
I tried to upgrade a similar device to 5.x, some changes, but some options now not working I have a clone Q88H device, A33 quadcore processor 7" clone. Kernel 3.4.39, firm ware 2.1 Need to go back to 4.4.2 w latest update. Hopefully Play store will work again, as I need it. That, or change to windows version. advice pls?
drusid said:
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
Click to expand...
Click to collapse
Please i dont have a needrom account i cant download plz who Can send me the direct link to m'y account
Hello and thank you for anyone bothering to read this.
I got a CAT S50 and was experiencing a bit of instability lately.
I've run LTE_S0201121.0_S50_0.023.00 without a hitch for a while, then it decided to crash several applications, from google play to any other app open.
That's when I decided to do a factory reset and see if it would help. Performed the rest without a hitch, but the errors kept coming back. At one point, the screen went black. I knew the phone was on because the backlit was working. I hard-reseted it (hold the power button for 30 seconds or more) and rebooted. The phone froze on the CAT splash logo screen and that's when I hard-reset it again. But when I tried to turn it on, the phone simply refused to work. No vibrate, sounds or anything. It's dead.
When I plug it on the computer's USB, the PC makes a sound as if it detected the device, but when I go to the device manager, I get this QHSUSB_BULK with the yellow exclamation mark
I want to know if it is possible to unbrick this phone and if so, if there is a tutorial or if someone can direct me to the correct procedure. I looked everywhere for the ftf file for this phone to attempt this with flashtool, but I simply can't find it.
ANY help of any form is greatly appreciated.
Sadly I had the same thing happen to me, just a black screen. It decided to delete recovery mode or I just cant get to it.
Power Off the Phone,
While pressing Press Vol Down + Cam Button insert a Powersource -- hold down Vol Down + Cam
Recoverymenu should start
Then flash the original rom via ADB Sideload or SD Card.
btw. i have flashed the LTE_S0201121.0_S50_0.023.00 but i want test older ROMs!
can anyone link or upload an older ROM ?
Guy i have the same issue, can you please help me
I got the same problem I search lots place but still nothing then normal update rom anyone can help?