So I opened my s2 to clean the lens of the camera, but after assembling it, the screen began to do weird.
I've tried flashing stock rom through odin (succes) but the screen remains like this (it doesn't freeze).
The screen has weird colors and bordings around the samsung logo.
I've pull off the display thing from the slot, cleaned it up and put it back in, still the same.
Any idea how to fix?
(if I need new screen it will be bye bye s2)
Related
I am using a galaxy s2 GT-I9100
Last night I decided to go back to the original ROM. When i turned on my phone and got to the "desktop", i found that the colors were faded into an unnatural white and that the banding from darker images was terrible (might be due to the fact that the screen is lighter).
I have tied changing the Colour/Screen Profiles, i have tried reflashing to the original ROM and also to the one i was using before. Nothing works.
What bothers me is the following: before doing any of this (when the phone was working fine) i made a back up. Now, when i restore that back up, the weird white and banding dont go away...
Can anyone please help me?
i am about to panic! please help!! :'(
Could it be hardware? :/
I am noticing a decrease in performance aswell....
sniff....
Hi,
I dropped my Galaxy S2 Yesterday (have no idea if this relates to it) But i plugged it into the charger this morning and everything was blue & some of the screen had turned black and some icons had burnt into the screen it looked like.
After taking it with me because it was still usable, Its not completely black except for maybe the faintest part of blue.
Im running Lite'ning rom, The newest one im pretty sure.
Just wondering if this is a virus? Or the screen is dead. I just cant see how it could suddenly die when it was flat and not turned on.
Phones not under warranty by the way. So maybe you could give me some options?
Thanks heaps guys
Probably the problem is hardware related due to the fall, but you could back all your data and try to do a factory reset to see if it fixes or not. If it doesn't fix maybe you should check your screen hardware.
Thanks for the reply,
I just reflashed Litening with Odin 1.85 and still nothing, I get the vibrations, touch lights, sound ect, But only occasionally a tiny little strip of blue along the top.
How would i check my screen hardware? Because i pulled apart my galaxy s after it died and accidently cracked the screen & Glass
How would i do a factory reset by the way? Since i cant see anything
I'd imagine it's dead. I'd take it to your local store and ask for an estimate on how much it would cost to fix it. If you can't see anything, then the screen is either broken or it got disconnected (or maybe some of the ribbons did at least).
Yeah, I just dont really wanna take the phone apart unless i know its likley to fix it.
When i first got it, I noticed it had black splotches on the screen in very dim light on a white background. Nd im guessing id have to almost buy a whole front screen assembly to replace the front screen D:.
Would i be better just to sell the phone how it is? Or repair it?
Hello everyone,
I have a question, sinds today my phone is doing trange thinks.
If I use the phone, don't matter what app or game sometimes my screen flips. I see very fast black screen and then is the creen back. Also the screen flips very quick from normal to landscape and back. This is not the only problem, also my battery gets hot. If I use apps or games the battery gets very hot, and normal this is not happend. This problems are getting up from to day and normal nothing strange happend.
I have reset my phone and have do a factory reset but this will not help. What can be the problem and is it possible if I flash a ROM that the problems are gone or is there a diffrent sollution of problem.
Thanks allot!!
What ROM are you using? Have you tried to flash a different kernel, like Siyah?
I use LPW ROM and its not the kernel because I use months the chainfire kernel without problems and now there are problems sins yesterday.
Verstuurd van mijn GT-I9100 met Tapatalk
Hey,
I'm getting the same problem with the screen quickly going black for 1 second and then back to whatever I was doing. It seems to happen on any application. I also have the issue where the screen will randomly rotate into landscape mode, then go black, and back to portrait. It does this with the phone laying flat on a level table or holding it upright in my hand, regardless of auto-rotate being on or off. It even does it on the home screen but it seems to reload the icons after it goes black, almost like it did a RAM reset or something. The black screen flash and rotate problems seem to be related, as they started happening around the same time, but don't always happen together.
The phone is Galaxy S II LTE from rogers running ICS 4.04, stock everything including touchwhiz. I have done a factory reset using the option on the phone which appeared to fix the problem only to come back after a few hours of re downloading my apps and whatnot. Also calibrated the gyro on a level surface...no fix.
Hey guys, so I had dropped my phone and shattered the screen on the top left and there was a crack down the middle. Anyways, I ordered a replacement and replaced it..and low and behold, either I did a bad job or somethings up with the ribbon from the replacement screen. When I turn it on, the screen will display this weird static and I can see the mikmik splash screen (Newts RLS6.0), then it'll go black. I guess once the phone goes into sleep mode I can turn the screen back on with no problems. But, here's my main problem..I can't get into amon ra without the screen completely being messed up. I'm a flashaholic and this is terrible for me. Does anyone know how to fix the problem itself, or is there a way I can flash ROMs through PC? (S-Off). Thank you guys in advance
I have a Galaxy S3 that I have been running CM 10.2 on for quite some time. Today I dropped the phone and cracked the screen. The phone still worked perfectly in every way despite the cracked screen. I used it for a few hours after without any issues. I took it to someone today to replace the screen assembly. When I got the phone back it turns on and the screen looks fine but it hangs on the samsung screen for 3-5 minutes before booting in to anything (booting the rom, recovery mode, download mode etc. all take 3-5 minutes to start) when the phone finally boots the touch screen does not work at all. All buttons work fine, including the bottom buttons (back and settings) for touch but no where else does the screen respond to touch.
So far I've tried:
- wiping cache
- factory reset
- re-installed CM 10.2 rom
- Took the back off the phone and checked all the connections, unclipped and clipped back in to be sure they were connected ok.
- Completely removed battery and all sim/sd cards for an hour
At this point I'm not sure if I'm dealing with a hardware issue (maybe they guy screwed something up when replacing the screen) or the digitizer/screen he used is faulty? I know this doesn't neccessarily mean anything but when I got it back the new screen still had the protective film etc. on it so I'm almost positive the screen assembly the guy used was at least new.
And I don't really understand where the 3-5 minute boot issue could come from? I wouldn't think it would be related to the screen/digitizer but I suppose anything is possible. What could explain this?
Is there any way this could be a software issue or any other troubleshooting I can attempt?
jfall said:
I have a Galaxy S3 that I have been running CM 10.2 on for quite some time. Today I dropped the phone and cracked the screen. The phone still worked perfectly in every way despite the cracked screen. I used it for a few hours after without any issues. I took it to someone today to replace the screen assembly. When I got the phone back it turns on and the screen looks fine but it hangs on the samsung screen for 3-5 minutes before booting in to anything (booting the rom, recovery mode, download mode etc. all take 3-5 minutes to start) when the phone finally boots the touch screen does not work at all. All buttons work fine, including the bottom buttons (back and settings) for touch but no where else does the screen respond to touch.
So far I've tried:
- wiping cache
- factory reset
- re-installed CM 10.2 rom
- Took the back off the phone and checked all the connections, unclipped and clipped back in to be sure they were connected ok.
- Completely removed battery and all sim/sd cards for an hour
At this point I'm not sure if I'm dealing with a hardware issue (maybe they guy screwed something up when replacing the screen) or the digitizer/screen he used is faulty? I know this doesn't neccessarily mean anything but when I got it back the new screen still had the protective film etc. on it so I'm almost positive the screen assembly the guy used was at least new.
And I don't really understand where the 3-5 minute boot issue could come from? I wouldn't think it would be related to the screen/digitizer but I suppose anything is possible. What could explain this?
Is there any way this could be a software issue or any other troubleshooting I can attempt?
Click to expand...
Click to collapse
Go and talk to the person who replaced your screen.. maybe has used faulty screen and also may be he has changed with some of the faulty parts..
suyash1629 said:
Go and talk to the person who replaced your screen.. maybe has used faulty screen and also may be he has changed with some of the faulty parts..
Click to expand...
Click to collapse
Very strange, but it looks like it was indeed a software issue after all. For some reason changing the screen out while having CM 10.2 installed did not play well together. I did a full wipe and went back to stock rom and touch is working now. I may try a new install of CM again to see what happens. Odd
jfall said:
Very strange, but it looks like it was indeed a software issue after all. For some reason changing the screen out while having CM 10.2 installed did not play well together. I did a full wipe and went back to stock rom and touch is working now. I may try a new install of CM again to see what happens. Odd
Click to expand...
Click to collapse
Strange issue.. never had it ever, m flashing CM from more than a year.. Try to do a new flash downloading new files..