Hello Guys [Sorry For My English], I am one of the most people who I buy a Korean Galaxy Note.
Model Number: SHV-E160K
Android Version: 4.1.2
Baseband Vesrion: E160KKKJNE4
Kernel Version: 3.0.31-1133407
[email protected]#1
SMP PREEMPT Fri May 30 19:23:24 KST 2014
Build Number: JZO54K.E160KKKJNE4
Android System Recovery <3e>
I have try almost everything from your site and Korean sites, but I can't install the recovery.
Please if someone can post the correct links [if possible no from Korean site but strait for download] for my model [E160K], for recovery, root and one rom that can unlock my Note.
Thank you.
http://forum.xda-developers.com/showthread.php?t=1775015
440bro said:
http://forum.xda-developers.com/showthread.php?t=1775015
Click to expand...
Click to collapse
I found this http://pspmaster.tistory.com/182 , but I don't know which I must choose, because my build it's different.
Can you help me?
NoziMoN said:
I found this http://pspmaster.tistory.com/182 , but I don't know which I must choose, because my build it's different.
Can you help me?
Click to expand...
Click to collapse
I download and I tried the SHV-E160K UF13 펌웨어 (ICS) but nothing, I still have the same Korean recovery <3e>.
Any suggestions?
Guys something changes! I still have the same recovery system <3e> but now:
Model Number: SHV-E160K
Android Version: 4.0.3
Baseband Vesrion: SHV-E160.UF05.2044.KT
Kernel Version: 3.0.8-perf-E160K.UF13.0008-CL703272
Build Number: IML74K.UF13
How I shall continue?
NoziMoN said:
Guys something changes! I still have the same recovery system <3e> but now:
Model Number: SHV-E160K
Android Version: 4.0.3
Baseband Vesrion: SHV-E160.UF05.2044.KT
Kernel Version: 3.0.8-perf-E160K.UF13.0008-CL703272
Build Number: IML74K.UF13
How I shall continue?
Click to expand...
Click to collapse
Try the Gimmeitoritell TWRP latest vesion
killerex said:
Try the Gimmeitoritell TWRP latest vesion
Click to expand...
Click to collapse
one link please.
I Did It!!!
Yes the TWRP 2.7.1 works perfect with the SHV-E160K UF13 펌웨어 (ICS) and now I can install whatever I want!
Thanks A Lot Guys!!!!
hi bro
NoziMoN said:
Yes the TWRP 2.7.1 works perfect with the SHV-E160K UF13 펌웨어 (ICS) and now I can install whatever I want!
Thanks A Lot Guys!!!!
Click to expand...
Click to collapse
i have the same version can you help me thanks a lot
i have the same version of your note 1 shv-160k and i cannot install any recovery you said twrp 2.7.1 worked on your phone. can you help me where you download twrp because i need to root my phone thanks.
Hello my friend please explain your problem and if I can I will help you.
how to root my phone thanks
NoziMoN said:
Hello my friend please explain your problem and if I can I will help you.
Click to expand...
Click to collapse
i have the same version of your note 1 shv-160k and i cannot install any recovery you said twrp 2.7.1 worked on your phone. can you help me where you download twrp because i need to root my phone thanks.
mudvaynemasp said:
i have the same version can you help me thanks a lot
i have the same version of your note 1 shv-160k and i cannot install any recovery you said twrp 2.7.1 worked on your phone. can you help me where you download twrp because i need to root my phone thanks.
Click to expand...
Click to collapse
Good Morning my friend. I had the 4.2.1 in my phone and I downgrade in stock 4.0.4 and after I put the recovery with Odin ver. 3.07.
Try this and tell me.
try this
mudvaynemasp said:
i have the same version of your note 1 shv-160k and i cannot install any recovery you said twrp 2.7.1 worked on your phone. can you help me where you download twrp because i need to root my phone thanks.
Click to expand...
Click to collapse
root your phone first then install twrp through recovery
killerex said:
root your phone first then install twrp through recovery
Click to expand...
Click to collapse
My E160K was rooted from Olleh for this reason I was not write here, maybe and yours e160k is rooted.
killerex said:
root your phone first then install twrp through recovery
Click to expand...
Click to collapse
thats the problem bro my method of root is thru twrp or cwm method it is zip file it says you need to flash a custom recovery before you root. i cannot find any process that works on my version.
NoziMoN said:
My E160K was rooted from Olleh for this reason I was not write here, maybe and yours e160k is rooted.
Click to expand...
Click to collapse
why method you use to root your phone i saw on the first page that we have the same version. thanks
---------- Post added at 12:30 AM ---------- Previous post was at 12:22 AM ----------
killerex said:
root your phone first then install twrp through recovery
Click to expand...
Click to collapse
thanks going to try this
mudvaynemasp said:
why method you use to root your phone i saw on the first page that we have the same version. thanks
---------- Post added at 12:30 AM ---------- Previous post was at 12:22 AM ----------
thanks going to try this
Click to expand...
Click to collapse
OK my friend. I'm here if you need anything.
NoziMoN said:
Yes the TWRP 2.7.1 works perfect with the SHV-E160K UF13 펌웨어 (ICS) and now I can install whatever I want!
Thanks A Lot Guys!!!!
Click to expand...
Click to collapse
Hello, NoziMoN!
I currently have JZO54K.E160KKKJNE4.
Can you please help explain step-by-step how you were able to root it? Would really appreciate it. Thanks in advance!
EDIT: ODIN log says successfully flashed recovery, but after reboot, it goes back to android/stock recovery <3e>.
I just flashed via ODIN this file SHV-E160K.UI24.zip and now it's stuck at OLLEH logo and won't boot. HELP
Cybernerd said:
Hello, NoziMoN!
I currently have JZO54K.E160KKKJNE4.
Can you please help explain step-by-step how you were able to root it? Would really appreciate it. Thanks in advance!
EDIT: ODIN log says successfully flashed recovery, but after reboot, it goes back to android/stock recovery <3e>.
I just flashed via ODIN this file SHV-E160K.UI24.zip and now it's stuck at OLLEH logo and won't boot. HELP
Click to expand...
Click to collapse
Hello, I am sorry but I don't have this mobile phone and I don't remember the procedure.
The only that I remember is that the TWRP was working for the specific model after a lot of work and read from my side. Try and I wish the best.
This worked for me, thanks
1. install samsungs drivers with kies
2. power off device
3. enter download mode, press [vol down + home + power] until vibrates, when screen shows korean text press [vol up]
4. conect usb, wait until driver is installed
5. open odin, click on PDA, select TWRP_2.7.0.0_E160K_bestmjh47.tar
6. press Start
7. be ready to press [vol up + vol down] after odin logs RES OK.
8. keep pressing until you see twrp screen
9. install supersu
TWRP_2.7.0.0_E160K_bestmjh47
http://achonapp.com/?path=/samsung/G...bestmjh47/TWRP
Related
Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
XCQT said:
Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
Click to expand...
Click to collapse
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Jokesy said:
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Click to expand...
Click to collapse
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
XCQT said:
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
Click to expand...
Click to collapse
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
XCQT said:
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Jokesy said:
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thank you so much. Got it up and running
CWM not getting installed
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Jay_7 said:
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Click to expand...
Click to collapse
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
TheATHEiST said:
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
Click to expand...
Click to collapse
M sorry bt i got that so what can i do to install the latest CWM ???
Jay_7 said:
M sorry bt i got that so what can i do to install the latest CWM ???
Click to expand...
Click to collapse
It doesnt matter, you have no reason to have latest, they are just updates to support more devices.
Just flash custom kernel, like latest Siyah, the kernels contain CWM.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
for step 1, we are installing a temp CWM for flashing kernel in step 2?
phone stuck in restarting when flashing cwm
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Flash siyah v6.
Sent from the little guy
gastonw said:
Flash siyah v6.
Sent from the little guy
Click to expand...
Click to collapse
Is this for me?...sorry...I didn't catch you.......Can you please elaborate or any link for my phone model and download links
---------- Post added at 07:52 AM ---------- Previous post was at 07:12 AM ----------
sunyreza said:
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Click to expand...
Click to collapse
can anybody help with details.........my phone is likely dead man.........
Yes it was meant for you, flash siyah v6 .tar version via Odin.
Sent from...this is not even my S2
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
tissaoui said:
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
Click to expand...
Click to collapse
I assume you are talking about PhilZ recovery........
If all you want is a custom recovery on a stock firmware then you have to match the recovery to the firmware build......
And you *do* realise that the leak/test firmware is not as stable as release firmwares don't you?
http://i.imgur.com/rVnFwJM.jpg
Respected Everybody,
I have a big problem. I just cann`t get out of "ODIN MODE " . After Flashing a custom rom (ICS AOKP 4.0.4), but i failed now when i boot up nothing comes up after the samsung logo. my phone is rooted , had ICS 4.0.4 on it and is an samsung galaxy s2 I9100.
Now it Says :
ODIN MODE (in red)
PRODUCT NAME : GT i9100
CUSTOM BINARY DOWNLOAD : YES (1 counts)
current binary : custom
" Downloading .............
Do not turn off target !! "
It is recognized by my PC via Odin ( <ID:0/004>Added!!).
Please help to get out of this problem. Anxiously waiting for help. Please Guide me.
As per your description, possible solutions as follows.
1. Boot your phone in recovery mode (Power+Home+Vol Up). Wipe Data/Factory Reset. Wipe Cache. Reboot
2. In download mode, flash stock ROM using different USB port with no internet connected.
This might solve your program.
Hit thanks if it helped you.
Please Help
mihirjoe said:
As per your description, possible solutions as follows.
1. Boot your phone in recovery mode (Power+Home+Vol Up). Wipe Data/Factory Reset. Wipe Cache. Reboot
2. In download mode, flash stock ROM using different USB port with no internet connected.
This might solve your program.
Hit thanks if it helped you.
Click to expand...
Click to collapse
Thanks Sir.
But I just cann`t go into recovery mode. Whenever I try to do so , nothing happen. It hangs on Samsung logo again.
I only access Odin Mode (Power+Home+ Vol Down). What should i do. Please Help me.
Micheal86 said:
Thanks Sir.
But I just cann`t go into recovery mode. Whenever I try to do so , nothing happen. It hangs on Samsung logo again.
I only access Odin Mode (Power+Home+ Vol Down). What should i do. Please Help me.
Click to expand...
Click to collapse
Your phone has entered a forced download mode.
You might have to flash a stock firmware to boot your phone properly
Sent from my GT-I9100 using Tapatalk 2
Please Help
Jokesy said:
Your phone has entered a forced download mode.
You might have to flash a stock firmware to boot your phone properly
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Sir,
I follow you. Every thing was fine (according to ODIN Message). But now it hangs on samsung bootanimation logo screen. Every time I try It remains the same. Now please tell me what should I do ? Please Guide me.
Micheal86 said:
Thanks Sir,
I follow you. Every thing was fine (according to ODIN Message). But now it hangs on samsung bootanimation logo screen. Every time I try It remains the same. Now please tell me what should I do ? Please Guide me.
Click to expand...
Click to collapse
Now boot to recovery mode and perform a Factory Data Reset
Sent from my GT-I9100 using Tapatalk 2
Please Help
Jokesy said:
Now boot to recovery mode and perform a Factory Data Reset
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Sir.
But, It will be very helpful for me ,if you please guide me to boot to recovery mode.
Micheal86 said:
Thanks Sir.
But, It will be very helpful for me ,if you please guide me to boot to recovery mode.
Click to expand...
Click to collapse
Turn off your phone, push up on volume+homebutton then hold power! And then you're in recovery!
Micheal86 said:
Thanks Sir.
But, It will be very helpful for me ,if you please guide me to boot to recovery mode.
Click to expand...
Click to collapse
to boot to recovery mode.
1)turn off ur phone first
2) then hold the three button combo(Vol up + Home + Pwr button) simultaneously, hold until u see recovery then release.
3) in recovery u have the option ' Wipe Data/factory reset, hit the same and in the next screen select 'yes' to perform the wipe.
4) after finishing the same, again in recovery select ' reboot system' and wait for ur phone to reboot
Please Help
Sun90 said:
to boot to recovery mode.
1)turn off ur phone first
2) then hold the three button combo(Vol up + Home + Pwr button) simultaneously, hold until u see recovery then release.
3) in recovery u have the option ' Wipe Data/factory reset, hit the same and in the next screen select 'yes' to perform the wipe.
4) after finishing the same, again in recovery select ' reboot system' and wait for ur phone to reboot
Click to expand...
Click to collapse
Thanks.
After doing everything will my beauty lost it`s rooted feature ? If so, then what should I do to root it again ? Is it the same before ? But the only difference is then it was ICS and now this will be GB (as I download the GB stock rom).
Now it will be :
Android Version
2.3.3
Baseband Version
I9100DDKE4
KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2
BUILD NUMBER
GINGERBREAD XWKF3
Would you be kindly enough to guide me to root it again, so that after rooting I will be able to flash an ICS AOKP custom rom ?
BTW , it will be fine if the CF - ROOT version is 5 or higher.
Please Help
Adarzannh said:
Turn off your phone, push up on volume+homebutton then hold power! And then you're in recovery!
Click to expand...
Click to collapse
Thanks Sir.
I will try it.
Micheal86 said:
Thanks.
After doing everything will my beauty lost it`s rooted feature ? If so, then what should I do to root it again ? Is it the same before ? But the only difference is then it was ICS and now this will be GB (as I download the GB stock rom).
Now it will be :
Android Version
2.3.3
Baseband Version
I9100DDKE4
KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2
BUILD NUMBER
GINGERBREAD XWKF3
Would you be kindly enough to guide me to root it again, so that after rooting I will be able to flash an ICS AOKP custom rom ?
BTW , it will be fine if the CF - ROOT version is 5 or higher.
Click to expand...
Click to collapse
Yes, you will lose root access.
You can download CF-ROOT kernel XWKF3 here: download.chainfire.eu/24/CF-Root/SGS2/CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4.zip
You need to first flash a stock based ICS ROM (at least), before flashing any AOKP based Rom
Sent from my GT-I9100 using Tapatalk 2
Please Help
Jokesy said:
Yes, you will lose root access.
You can download CF-ROOT kernel XWKF3 here: download.chainfire.eu/24/CF-Root/SGS2/CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4.zip
You need to first flash a stock based ICS ROM (at least), before flashing any AOKP based Rom
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Many, many thanks Sir,
for your most valuable advice, which you have given from the very beginning.
One thing, by using "Check Fus Downloader 2.1 (by respected luffar joh), I have got a firmware for my region.
The details of the firmware is :
Product Code: GT-I9100LKAINU
Latest firmware: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7
Modified: 4/5/2012 6:15:29 PM
Filename: GT-I9100_INU_1_20120405181515_xrqgd7x460.zip.enc2.
Sir, Should I flash This One First ?
How do I install CWM v.6 (as I have read that it is much better than v.4 or v.5) after flashing the ICS AOKP ?
Please Help
Thank you all for helping me a lot.
Now I just want to know that after flashing GB 2.3.3 ( KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2) Why I can not root my device ?
Whenever I try to root it, after flashing the Kernel (CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4), it always says:
Checking Device Connection...
Device Connected!
Restarting ADB Server...
Checking ROOT Access...
Superuser Request Has Been DENIED! Aborting...
Why it is happening and how to solve it ?
Micheal86 said:
Thank you all for helping me a lot.
Now I just want to know that after flashing GB 2.3.3 ( KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2) Why I can not root my device ?
Whenever I try to root it, after flashing the Kernel (CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4), it always says:
Checking Device Connection...
Device Connected!
Restarting ADB Server...
Checking ROOT Access...
Superuser Request Has Been DENIED! Aborting...
Why it is happening and how to solve it ?
Click to expand...
Click to collapse
after flashing that GB firmware, do a factory reset, after that try rooting ur phone and see
Please Help
Sun90 said:
after flashing that GB firmware, do a factory reset, after that try rooting ur phone and see
Click to expand...
Click to collapse
Thanks for your reply.
I just want to share something with you.
I have read somewhere in this forum that never do a factory reset with the stock rom (because of it`s kernel). First anyone have to change the kernel of the stock rom with siyah or dorimanx or darknight and then do anything you want.
According to that I have just tried to do that, but don`t know why I cann`t. Whenever I try to do that it always says "no signature validation",or something like that. I use CWM v.4.
Do I change the CWM to v.5 or v.6 by flashing ? I just don`t want to use CWM v.4.
BTW, now I am in :
Android Version
2.3.3
Baseband Version
I9100DDKE4
KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2
BUILD NUMBER
GINGERBREAD XWKF3
It` rooted. Do I flash any ICS rom in it ? If so, please help me to do that.
Please guide me.
Micheal86 said:
1.
I have read somewhere in this forum that never do a factory reset with the stock rom (because of it`s kernel). First anyone have to change the kernel of the stock rom with siyah or dorimanx or darknight and then do anything you want.
2.
According to that I have just tried to do that, but don`t know why I cann`t. Whenever I try to do that it always says "no signature validation",or something like that. I use CWM v.4.
3.
Do I change the CWM to v.5 or v.6 by flashing ? I just don`t want to use CWM v.4.
4.
BTW, now , It` rooted. Do I flash any ICS rom in it ? If so, please help me to do that.
Please guide me.
Click to expand...
Click to collapse
1.
You are reading it WRONG!
What you read is only applicable to stock ICS 4.0.4 firmware. Nothing more!
Therefore in your case it is not applicable.
Those kernels you listed are ICS kernels, if you flash them on your phone, your device simply won't boot.
2. The reason why you couldn't flash those kernels is because they required minimum of CWM version 5.
3. You can change it by simply flashing Siyah kernel meant for gingerbread which comes with CWM version 5.
Like i said earlier, don't flash ICS kernel on Gingerbread, except an expert advise you on something.
4. If you want to flash an ICS ROM, it's very simple.
- First, you need to download Siyah kernel (for GT I9100, zip version) for gingerbread here : www.gokhanmoral.com/gm/2012/01/13/siyahkernel-v2-6-7/
- Flash the Siyah kernel via CWM recovery
- Download any stock based ICS ROM of your choice. When you are done, let me know.
Sent from my GT-I9100 using Tapatalk 2
Please Help
Jokesy said:
1.
You are reading it WRONG!
What you read is only applicable to stock ICS 4.0.4 firmware. Nothing more!
Therefore in your case it is not applicable.
Those kernels you listed are ICS kernels, if you flash them on your phone, your device simply won't boot.
2. The reason why you couldn't flash those kernels is because they required minimum of CWM version 5.
3. You can change it by simply flashing Siyah kernel meant for gingerbread which comes with CWM version 5.
Like i said earlier, don't flash ICS kernel on Gingerbread, except an expert advise you on something.
4. If you want to flash an ICS ROM, it's very simple.
- First, you need to download Siyah kernel (for GT I9100, zip version) for gingerbread here : www.gokhanmoral.com/gm/2012/01/13/siyahkernel-v2-6-7/
- Flash the Siyah kernel via CWM recovery
- Download any stock based ICS ROM of your choice. When you are done, let me know.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Many,many thanks Sir, for your most valuable advice.
At first I`m really very sorry for my mistake.
I have just downloaded the recommended kernel (with link).
And I have downloaded three stock/stock based based ICS roms.
1. XWLPG.SalmanRom_v4
2. Omega_ICS_v15_Black_Blue_XWLPG
3. by using "Check Fus Downloader 2.1 (by respected luffar joh), I have got a firmware for my region.
The details of the firmware is :
Product Code: GT-I9100LKAINU
Latest firmware: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7
Modified: 4/5/2012 6:15:29 PM
Filename: GT-I9100_INU_1_20120405181515_xrqgd7x460.zip.enc2.
(Though this one had the previous booting problem).
Now sir, please guide me.
Micheal86 said:
Many,many thanks Sir, for your most valuable advice.
At first I`m really very sorry for my mistake.
I have just downloaded the recommended kernel (with link).
And I have downloaded three stock/stock based based ICS roms.
1. XWLPG.SalmanRom_v4
2. Omega_ICS_v15_Black_Blue_XWLPG
3. by using "Check Fus Downloader 2.1 (by respected luffar joh), I have got a firmware for my region.
The details of the firmware is :
Product Code: GT-I9100LKAINU
Latest firmware: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7
Modified: 4/5/2012 6:15:29 PM
Filename: GT-I9100_INU_1_20120405181515_xrqgd7x460.zip.enc2.
(Though this one had the previous booting problem).
Now sir, please guide me.
Click to expand...
Click to collapse
1. People who ask questions hardly make mistakes. This is the reason why you haven't yet made any mistake.
2. The third ICS firmware you posted can only be flashed via Odin. I'll say, just keep it somewhere. You won't need it for now.
3. Have you flashed the Siyah kernel yet?
If yes, please post your present and kernel details
Sent from my GT-I9100 using Tapatalk 2
Please Help
Jokesy said:
1. People who ask questions hardly make mistakes. This is the reason why you haven't yet made any mistake.
2. The third ICS firmware you posted can only be flashed via Odin. I'll say, just keep it somewhere. You won't need it for now.
3. Have you flashed the Siyah kernel yet?
If yes, please post your present and kernel details
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Sir, I have just try to flash the kernel, but I cann`t.
It says :
"E: signature verification failed
Installation aborted".
Q&A for [CWM][Repo]ClockWorkMod Recovery - ||Kit-Kat 4.4 Compatible||
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I just flashed your CWM 6.0.4.7 and now my phone wont boot . What can I do now ?
I just flashed your CWM 6.0.4.7 and now my phone wont boot . What can I do now ?
afelipe.carvalho said:
I just flashed your CWM 6.0.4.7 and now my phone wont boot . What can I do now ?
Click to expand...
Click to collapse
Hi, Is there any mode the device can boot into? Download mode? If the recovery flash went wrong you can still go into download mode. Do this by pressing (Vol Down + Home + Power ) all at the same time.
More information about the device would be great as well, ROM etc. :good::highfive:
Hardware MT6572 help for root
Hardware
MT6572
Cloudfone Excite 401dx
kitkat 4.4.2
Build date UTC
20141021-075342
Baseband version
MOLY.WR8.W1315.MD.WG.MP.V47,2014/06/28 21:20
KERNEL VERSION
3.4.67 ([email protected]) (gccversion 4.7 (GCC)) #1 SMP Tue Oct 21 15:4745 CST 2014
Sat oct 18 15:48:45 CST 2014
Build number Cloudfone_Excite_401dx_FS20141018_V05
pls help me how to root... i try iroot towelroot etc is not working pls help me..
5.1?
Will this cwm support Lollipop 5.1+ ?
can i use this recovery to install cm 12.1
I am presently on cm 9 running on galaxy s2 GT-9100
Harsh Gangwani said:
I am presently on cm 9 running on galaxy s2 GT-9100
Click to expand...
Click to collapse
Yes, just flash it via your recovery, then reboot back into recovery(not system). Then do your backups, wipes etc and follow the steps from OP
are you sure it's working? and is not a fake that mirror?
Would CWM Base Version 6.0.3.3 Work
Hi All,
I m having PhilZ Touch 5 Build Version 5.08.5 - i9100 CWM Base Version 6.0.3.3. with Stock ROM. Would this suffice to upgrade to Kitkat or Do I need to upgrade the CWM ?
Just a Noob, taking one step a time.
Thanks in advance
DEvice Info :
PDA : I9100XWLST
PHONE : I9100XXKH3 (Changed to this, from I9100DDLS9, after trying Overheating Fix)
CSC: I9100DDLSE
Build Info : Moday, April 22 16:44:57 KST 2013
Android Version : 4.1.2
[email protected] said:
Hi All,
I m having PhilZ Touch 5 Build Version 5.08.5 - i9100 CWM Base Version 6.0.3.3. with Stock ROM. Would this suffice to upgrade to Kitkat or Do I need to upgrade the CWM ?
Just a Noob, taking one step a time.
Thanks in advance
DEvice Info :
PDA : I9100XWLST
PHONE : I9100XXKH3 (Changed to this, from I9100DDLS9, after trying Overheating Fix)
CSC: I9100DDLSE
Build Info : Moday, April 22 16:44:57 KST 2013
Android Version : 4.1.2
Click to expand...
Click to collapse
Yes, you need to use a newer version. CWM 6.0.4.5+ will work for kitkat and above
noppy22 said:
Yes, you need to use a newer version. CWM 6.0.4.5+ will work for kitkat and above
Click to expand...
Click to collapse
Thanks Noppy22 you are my Saviour .
Where and how can I update that just a link to some thread. Though I have downloaded
CWM_6.0.4.7_I9100.zip
Simply flash it from recovery or any other way there?
[email protected] said:
Thanks Noppy22 you are my Saviour .
Where and how can I update that just a link to some thread. Though I have downloaded
CWM_6.0.4.7_I9100.zip
Simply flash it from recovery or any other way there?
Click to expand...
Click to collapse
Yes, just flash it in recovery and reboot back to the new recovery. Then flash the KitKat ROM and gapps(after wipes) and you're done
noppy22 said:
Yes, just flash it in recovery and reboot back to the new recovery. Then flash the KitKat ROM and gapps(after wipes) and you're done
Click to expand...
Click to collapse
Thanks Again. Will try and update here
Use kingroot and boom
??? It worked on my cloudfone excite 401 dx+
[email protected] said:
Thanks Again. Will try and update here
Click to expand...
Click to collapse
Dear Friends,
I did updated my CWM with CWM_6.0.4.7_I9100.zip. It installed properly. I restarted the phone and its now showing the SGS2 Logo and then black screen.
I can get into recovery. Need help to revive it again. Though I m searching for the threads and posts in the forum. but any direct reference would be handful. My handset details and history of rooting and CWM update are as below :
Rooted with PhilZ Touch 5 Build Version 5.08.5 - i9100 CWM Base Version 6.0.3.3. with Stock ROM. updated CWM, with CWM_6.0.4.7_I9100.zip, by installing Zip option using recovery .
Device Info :
PDA : I9100XWLST
PHONE : I9100XXKH3 (Changed to this, from I9100DDLS9, after trying Overheating Fix)
CSC: I9100DDLSE
Build Info : Moday, April 22 16:44:57 KST 2013
Android Version : 4.1.2
Thanks in advance to you all.
[email protected] said:
I did updated my CWM with CWM_6.0.4.7_I9100.zip. It installed properly. I restarted the phone and its now showing the SGS2 Logo and then black screen.
I can get into recovery. Need help to revive it again. Though I m searching for the threads and posts in the forum. but any direct reference would be handful. My handset details and history of rooting and CWM update are as below :
Rooted with PhilZ Touch 5 Build Version 5.08.5 - i9100 CWM Base Version 6.0.3.3. with Stock ROM. updated CWM, with CWM_6.0.4.7_I9100.zip, by installing Zip option using recovery .
Click to expand...
Click to collapse
The CWM 6.0.4.7 is only useful to you to directly upgrade to a kitkat rom. When you flashed the recovery it replaced your kernel. Only use the newer recovery if you want to flash a new rom. Otherwise it is of no use to you.
So you can either use CWM 6.0.4.7 to flash kitkat or just flash the philz kernel you used before. You might need to wipe cache and dalvik cache before you reboot(this won't wipe any data).
noppy22 said:
The CWM 6.0.4.7 is only useful to you to directly upgrade to a kitkat rom. When you flashed the recovery it replaced your kernel. Only use the newer recovery if you want to flash a new rom. Otherwise it is of no use to you.
So you can either use CWM 6.0.4.7 to flash kitkat or just flash the philz kernel you used before. You might need to wipe cache and dalvik cache before you reboot(this won't wipe any data).
Click to expand...
Click to collapse
Thanks again Noppy22. That really helped me understand the cause and I've revived it back to original.
This time took backup of everything, which I didn't even after reading in each and every OP to take backup first and then move on. Well then thats the way to learn
Thanks
hi guys i just got a Samsung Galaxy fame lite GT-S6790N , and i tried a lot of things but cannot root , install cwm or costum rom .
It has jelly bean 4.1.2 installed and it is laggy as hell it is very slow so thats why i want to change the rom , so please any suggestions links or tutorials ... i tried Root_with_Restore_by_Bin4ry_v33 and some other root methods but doesn't work idk what to do because can't find any other root , cwm , rom , tutorial
more info about my phone :
Samsung Galaxy fame lite GT-S6790N
current version : Jelly bean 4.1.2
Baseband version : S6790NXXAMJ1
kernel version : 3.0.15-1496475
[email protected]#1
Fri Dec 20 13:33:53 KST 2013
Build Number : JZO54K.S6790NXXAML2
THANK FOR ANY HELP
ltoptic said:
hi guys i just got a Samsung Galaxy fame lite GT-S6790N , and i tried a lot of things but cannot root , install cwm or costum rom .
It has jelly bean 4.1.2 installed and it is laggy as hell it is very slow so thats why i want to change the rom , so please any suggestions links or tutorials ... i tried Root_with_Restore_by_Bin4ry_v33 and some other root methods but doesn't work idk what to do because can't find any other root , cwm , rom , tutorial
more info about my phone :
Samsung Galaxy fame lite GT-S6790N
current version : Jelly bean 4.1.2
Baseband version : S6790NXXAMJ1
kernel version : 3.0.15-1496475
[email protected]#1
Fri Dec 20 13:33:53 KST 2013
Build Number : JZO54K.S6790NXXAML2
THANK FOR ANY HELP
Click to expand...
Click to collapse
Have you tried using towelroot yet?
shimp208 said:
Have you tried using towelroot yet?
Click to expand...
Click to collapse
yeah i have it says device not supported or something like that
ltoptic said:
yeah i have it says device not supported or something like that
Click to expand...
Click to collapse
Did you try changing the mod strings in towel root to fit your device?
shimp208 said:
Did you try changing the mod strings in towel root to fit your device?
Click to expand...
Click to collapse
no i didn't try and i don't know how to do it can you do it for me and tell me how to install it ?
ok i did that string after pressing make it rain phone restarted ? rootchecker shows that i am rooted but
i cannot install cwm or twrp ??
ltoptic said:
no i didn't try and i don't know how to do it can you do it for me and tell me how to install it ?
ok i did that string after pressing make it rain phone restarted ? rootchecker shows that i am rooted but
i cannot install cwm or twrp ??
Click to expand...
Click to collapse
Glad you could get rooted, is there a CWM or TWRP recovery image available for your device? If there isn't one available you may have to compile it yourself using this guide. What are you currently using to try and install recovery?
shimp208 said:
Glad you could get rooted, is there a CWM or TWRP recovery image available for your device? If there isn't one available you may have to compile it yourself using this guide. What are you currently using to try and install recovery?
Click to expand...
Click to collapse
My phone is very slow and laggy i thought you guys have any good fast stable rom for my phone . I don't have ubuntu and really this stuff isn't that easy lol but still if you could do this compile for me would be great . thanks for any help
ltoptic said:
My phone is very slow and laggy i thought you guys have any good fast stable rom for my phone . I don't have ubuntu and really this stuff isn't that easy lol but still if you could do this compile for me would be great . thanks for any help
Click to expand...
Click to collapse
For any ROMs you would need a custom recovery. Unfortunately as the winter is my busiest time at school, I won't have time to compile a recovery for you until at least the end of March. However if you send me your stock recovery.img and stock boot.img I will see if I have time earlier.
shimp208 said:
For any ROMs you would need a custom recovery. Unfortunately as the winter is my busiest time at school, I won't have time to compile a recovery for you until at least the end of March. However if you send me your stock recovery.img and stock boot.img I will see if I have time earlier.
Click to expand...
Click to collapse
ok tell me how to do that , do you need any backup or something from my phone or just the original stock img from my phone ?
ltoptic said:
ok tell me how to do that , do you need any backup or something from my phone or just the original stock img from my phone ?
Click to expand...
Click to collapse
I just need the original boot.img and stock recovery.img for your phone, you can use either terminal emulator or adb shell to dump those. Let me know if you need more detailed instructions.
shimp208 said:
I just need the original boot.img and stock recovery.img for your phone, you can use either terminal emulator or adb shell to dump those. Let me know if you need more detailed instructions.
Click to expand...
Click to collapse
i have the stock recovery , cuz i try to install every cmw or twrp and it brick my phone so i use odin to recover my recovery mode, this is the download link for my stock rom http://www.nextwap.net/down-firmware/7513/samsung-galaxy-fame-lite-gt--s6790n.html
just tell me how to make that dump
Q&A for Galaxy V SM-G313HZ Development Thread
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Galaxy V SM-G313HZ Development Thread. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Samsung galaxy v (sm-g313hz)
Guys please infform me if we have a cyanogenmod for our device .. bec. Im a big fan of CYANOGEN MOD . I want to change my stock rom to CM12 But i cant saw any compatible cyanogenmod for our device .. please help i want cyanogen for sgv .. thanks .. my device already running nemoid rom v1.1 but it does have too many bugs .. thanks please help
ear piece problem
Hi boss
Thanks for your wonderfull work
Please I have updated my galaxy v sm-G313HZ and my ear piece cease working, anytime I want to make call have to use speaker out before I can make call. Please help me
we might be needing a new unlocked bootloader for samsung galaxy V. I bet your phone updated on your first use or maybe the newer samsung galaxy vivalto got modded firmware versions thats why all roots are not working right now.
Here's the white screen of death upon recovery if the developers want to see.
luckily I got a stock rom so everytime I test a root and failed, I just flash the stock and it works again.
galaxyV
allaiza10 said:
we might be needing a new unlocked bootloader for samsung galaxy V. I bet your phone updated on your first use or maybe the newer samsung galaxy vivalto got modded firmware versions thats why all roots are not working right now.
Here's the white screen of death upon recovery if the developers want to see.
luckily I got a stock rom so everytime I test a root and failed, I just flash the stock and it works again.
Click to expand...
Click to collapse
i got same problem too T.T, i try to instalng some stock CMWrecovery or TRWP but still white screen problem
sorry for the late respons
seyramob said:
Hi boss
Thanks for your wonderfull work
Please I have updated my galaxy v sm-G313HZ and my ear piece cease working, anytime I want to make call have to use speaker out before I can make call. Please help me
Click to expand...
Click to collapse
have u try to flashing stockrom firmware thru odin ?
allaiza10 said:
we might be needing a new unlocked bootloader for samsung galaxy V. I bet your phone updated on your first use or maybe the newer samsung galaxy vivalto got modded firmware versions thats why all roots are not working right now.
Here's the white screen of death upon recovery if the developers want to see.
luckily I got a stock rom so everytime I test a root and failed, I just flash the stock and it works again.
Click to expand...
Click to collapse
have u install custom recovery before rooting ? and what the version of firmware do you use ?
Hi, Actually this happens after attempting to install CWM, TWRP or whatsoever custom recovery thru odin. The device is not yet rooted as custom recovery needs to be flashed first. Device is usb debug enabled tho.
firmware is andr 4.4.2 kitkat.
baseband: g313hzdxu0aob1
build: kot49h.g313hzdbu0aob4
trafargal said:
Guys please infform me if we have a cyanogenmod for our device .. bec. Im a big fan of CYANOGEN MOD . I want to change my stock rom to CM12 But i cant saw any compatible cyanogenmod for our device .. please help i want cyanogen for sgv .. thanks .. my device already running nemoid rom v1.1 but it does have too many bugs .. thanks please help
Click to expand...
Click to collapse
my suggestion is if u decided to install custom rom, so you should be ready with bugs. And about cyanogenmod, i've managed build CM11 rom for galaxy v, but still bootloop. cant open homescreen. i'll try to rebuild and fix it if i have free time. why not CM12 ? bcz the size of source code CM12 is very very large. And i dont have fast connection to download it.
---------- Post added at 05:55 AM ---------- Previous post was at 05:54 AM ----------
allaiza10 said:
Hi, Actually this happens after attempting to install CWM, TWRP or whatsoever custom recovery thru odin. The device is not yet rooted as custom recovery needs to be flashed first. Device is usb debug enabled tho.
firmware is andr 4.4.2 kitkat.
baseband: g313hzdxu0aob1
build: kot49h.g313hzdbu0aob4
Click to expand...
Click to collapse
try to use old firmware version. maybe can fix it.
Yup, using the old firware will fix the white screen upon entering recovery BUT, as we are here for "Custom Recovery". I have bought my galaxy v last february only. I think new versions of galaxy V had been modified so custom recovs cannot be flashed.
Note: Everytime I got white screen on attempts to flash any custom recovery, I just flash the stock rom and everythings working again. but, as you see in order to root the device, I need to flash a working custom recovery.
vroot,kingroot,frama root or any other 3rd party program roots doesnt work aswell.
allaiza10 said:
Yup, using the old firware will fix the white screen upon entering recovery BUT, as we are here for "Custom Recovery". I have bought my galaxy v last february only. I think new versions of galaxy V had been modified so custom recovs cannot be flashed.
Note: Everytime I got white screen on attempts to flash any custom recovery, I just flash the stock rom and everythings working again. but, as you see in order to root the device, I need to flash a working custom recovery.
vroot,kingroot,frama root or any other 3rd party program roots doesnt work aswell.
Click to expand...
Click to collapse
I do not advise you to use vroot, kingroot, framaroot or other third-party app for rooting. I've tried to install custom recovery with any firmware version and everything is fine. So I was also confused with what is actually happening on your device.
BTW, please quote my reply if you want to reply.
I only tried the 3rd party roots when all the flashing (CWM, TWRP) did not succeed. If you check other threads, it is not only me who is having this problem.
galaxy v problem
friyadhi_biermann said:
i got same problem too T.T, i try to instalng some stock CMWrecovery or TRWP but still white screen problem
Click to expand...
Click to collapse
cleverior.ipul said:
sorry for the late respons
have u try to flashing stockrom firmware thru odin ?
have u install custom recovery before rooting ? and what the version of firmware do you use ?
Click to expand...
Click to collapse
i tried to flash instal recovery http://forum.xda-developers.com/ace-4/development/recovery-twrp-recovery-2-8-5-0-samsung-t3038601 ( use odin 3.09 and 3.10 ) but still white screen problem while going in recovery mode, my phone can't rooted, T.T
help me a solution please
android ver kitkat 4.4.2
base G313HZDXUOAOB1
kernel ver 3.10.17-4213080 [email protected] #2 FRI 13 17:19:19 KST 2015
No. ver KOT49H.G313HZDBUOAOB4
product. vietnam
friyadhi_biermann said:
i tried to flash instal recovery http://forum.xda-developers.com/ace-4/development/recovery-twrp-recovery-2-8-5-0-samsung-t3038601 ( use odin 3.09 and 3.10 ) but still white screen problem while going in recovery mode, my phone can't rooted, T.T
help me a solution please
android ver kitkat 4.4.2
base G313HZDXUOAOB1
kernel ver 3.10.17-4213080 [email protected] #2 FRI 13 17:19:19 KST 2015
No. ver KOT49H.G313HZDBUOAOB4
product. vietnam
Click to expand...
Click to collapse
i dont know what the problems bcz i'm using AOB1 and install custom recovery and everything is fine. did u ever update system via OTA ?
cleverior.ipul said:
i dont know what the problems bcz i'm using AOB1 and install custom recovery and everything is fine. did u ever update system via OTA ?
Click to expand...
Click to collapse
for updating the system via OTA , I 've often tried it ... just for my G313HZDBUOAOB4 firmware upgrades via updates syetem original ... if there is a firmware XSE-G313HZDBUOAOB4 via mediafire I want to try downloading it . whether the teacher has his link ?
I can not download at uploaded.com and rapidgator.com
Pls help me unbrick my samsung gaaxy v sm g313hz...
Please someone help me how to unbick my samsung galaxy v, after rooting process my phone now stock in a white screen display and i tried to flash other ROM but it failed on ODEN. Hopefully theres ather way to unbick my phone. For those who know please help me. Thank you so much in advance..
Works on G313ML
It works perfectly on G313ML, Thanks a lot!!!!!!!
Naz32 said:
It works perfectly on G313ML, Thanks a lot!!!!!!!
Click to expand...
Click to collapse
what do you mean ? can u more specific ?
White screen galaxy v
please help
after i flash using odin stock rom, my galaxy v have sound but have white screen.
..
GenoStelar said:
please help
after i flash using odin stock rom, my galaxy v have sound but have white screen.
Click to expand...
Click to collapse
what firmware version you use ?
jonjie666 said:
..
Click to expand...
Click to collapse
????