Hi all,
I was trying to root my device (i9200) to get CM11 installed and now it doesn't boot anymore. After boot It shows the Galaxy Mega logo and plays the samsung music, but nothing appears on screen, and the frontal LED keeps blinking forever until I reboot or turn it off.
The previous installed ROM was a stock 4.4.2 from Brazil (ZTO).
I just did the procedure as described in
http://forum.xda-developers.com/showpost.php?p=43379697&postcount=2
In ODIN I selected the file from PDA tab, is that right? how can I fix this? I have access to recovery and download mode.
Thanks in advance
ps: "Set Warranty Bit: Kernel" appears right after I turn it on.
flash latest phil recovery via odin and then boot into recovery and flash cm + gapps
Kid_Ding said:
flash latest phil recovery via odin and then boot into recovery and flash cm + gapps
Click to expand...
Click to collapse
Could you be more specific? Or point a url where I can follow instructions to do it..
My fear is to do something wrong and complicate even more the situation, or even brick the device since i'm not used to install custom ROMs.
VectorBr said:
Could you be more specific? Or point a url where I can follow instructions to do it..
My fear is to do something wrong and complicate even more the situation, or even brick the device since i'm not used to install custom ROMs.
Click to expand...
Click to collapse
flash this via odin [i9200/i9205][CWM Advanced Edition] PhilZ Touch
reboot into recovery and flash cm + gapps zip files.
---------- Post added at 12:07 AM ---------- Previous post was at 12:04 AM ----------
Kid_Ding said:
flash this via odin [i9200/i9205][CWM Advanced Edition] PhilZ Touch
reboot into recovery and flash cm + gapps zip files.
Click to expand...
Click to collapse
[ROM][GT-I9200/I9205][Unofficial] CyanogenMod11 : 20140721 [4.4.4] < this thread has more instructions that you can follow
Related
Hi Mates - i need help.
I just rooted my Galaxy S3 (i9300) and after it restarted, all i can see is just pure black screen.
- Prior to Rooting, here's my phone status:
Official Stock 4.1.2 Official Firmware
Never been rooted prior to this incident
What i used:
Odin 1.85
CF-Insecure-SGS3_XX_NEE_ALE8-v1.2
Can someone please help me?
Sometimes it doesn t get rooted. Check if you can boot into recovery or not by using button combo.
Post in General section.
caloyskii23 said:
Hi Mates - i need help.
I just rooted my Galaxy S3 (i9300) and after it restarted, all i can see is just pure black screen.
- Prior to Rooting, here's my phone status:
Official Stock 4.1.2 Official Firmware
Never been rooted prior to this incident
What i used:
Odin 1.85
CF-Insecure-SGS3_XX_NEE_ALE8-v1.2
Can someone please help me?
Click to expand...
Click to collapse
1st thing is this should be in QA section not development section
Right can odin still see/connect to your phone? Can u still enter recovery etc?
http://forum.xda-developers.com/showthread.php?t=1695238
Re-downloading and flash cf.root 6.4, everything will be fine.
SwiftSmoke said:
1st thing is this should be in QA section not development section
Right can odin still see/connect to your phone? Can u still enter recovery etc?
Click to expand...
Click to collapse
yes, i can detect my phone, mate. need help please..
misacek said:
http://forum.xda-developers.com/showthread.php?t=1695238
Re-downloading and flash cf.root 6.4, everything will be fine.
Click to expand...
Click to collapse
after downloading cf.root 6.4 and flashing it via odin, still shows black screen.
Question - considering that i have flashed cf.root 6.4, will the procedure below brick my phone?
- install CWM 6.0.3.1
- reboot into CWM recovery
- install custom rom
Please advise me, mates...
caloyskii23 said:
after downloading cf.root 6.4 and flashing it via odin, still shows black screen.
Question - considering that i have flashed cf.root 6.4, will the procedure below brick my phone?
- install CWM 6.0.3.1
- reboot into CWM recovery
- install custom rom
Please advise me, mates...
Click to expand...
Click to collapse
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
caloyskii23 said:
after downloading cf.root 6.4 and flashing it via odin, still shows black screen.
Question - considering that i have flashed cf.root 6.4, will the procedure below brick my phone?
- install CWM 6.0.3.1
- reboot into CWM recovery
- install custom rom
Please advise me, mates...
Click to expand...
Click to collapse
If the cf root procedure was successful I wouldn't worry about installing a diff recovery just yet, lets get the phone booting 1st. Download a custom rom and get it moved onto your external sd card, Boot into recovery(from power off, press volume up, home button and power), make sure its custom and not default. Then install the custom rom zip and reboot it should hopefully fully reboot. then look into installing a newer custom recovery.
dhirend_6d said:
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
Click to expand...
Click to collapse
when you say button combo, that's VOLUME UP+HOME+ POWER, right? if so, yes, i can go to recovery mode, hirend_6d.
dhirend_6d said:
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
Click to expand...
Click to collapse
SwiftSmoke said:
If the cf root procedure was successful I wouldn't worry about installing a diff recovery just yet, lets get the phone booting 1st. Download a custom rom and get it moved onto your external sd card, Boot into recovery(from power off, press volume up, home button and power), make sure its custom and not default. Then install the custom rom zip and reboot it should hopefully fully reboot. then look into installing a newer custom recovery.
Click to expand...
Click to collapse
in odin, it showed that the root procedure was successful. not sure if i got your correctly, mate. so you mean i can go into recovery mode and flash custom rom?
dhirend_6d said:
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
Click to expand...
Click to collapse
no..! you can flash CWM recovery even though the phone is not rooted! for sure! after flashing CWM recovery we can root the phone by flashing superuser.zip! i've done this many times!
caloyskii23 said:
in odin, it showed that the root procedure was successful. not sure if i got your correctly, mate. so you mean i can go into recovery mode and flash custom rom?
Click to expand...
Click to collapse
If the recovery has been updated to the custom CWM recovery then yes you could flash a rom which will come with root and super user. But it must be the custom recovery if your still on the stock recovery u couldn't flash a custom rom.
caloyskii23 said:
when you say button combo, that's VOLUME UP+HOME+ POWER, right? if so, yes, i can go to recovery mode, hirend_6d.
Click to expand...
Click to collapse
Ohk, is the recovery stock recovery or custom (CWM) recovery. Anyways, try to wipe data and cache and boot. If not successful, install a custom ROM. But make sure the recovery is CWM recovery.
dhirend_6d said:
Ohk, is the recovery stock recovery or custom (CWM) recovery. Anyways, try to wipe data and cache and boot. If not successful, install a custom ROM. But make sure the recovery is CWM recovery.
Click to expand...
Click to collapse
how would i know if it's custom recovery? any sign that will tell me that?
're super SU apk.v phone? Icon?
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
here cwm
http://forum.xda-developers.com/showthread.php?t=2002953
misacek said:
're super SU apk.v phone? Icon?
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
here cwm
http://forum.xda-developers.com/showthread.php?t=2002953
Click to expand...
Click to collapse
Can you ecommend a custom rom that is already rooted? i already have downloaed sentinel rom 4.6. is that rooted? tried to read the thread but i didn't see anythng that says it's rooted.
http://forum.xda-developers.com/showthread.php?t=2249984
caloyskii23 said:
Can you ecommend a custom rom that is already rooted? i already have downloaed sentinel rom 4.6. is that rooted? tried to read the thread but i didn't see anythng that says it's rooted.
http://forum.xda-developers.com/showthread.php?t=2249984
Click to expand...
Click to collapse
O__O, All custom ROMs are rooted I suppose. And yes Sentinel ROM is rooted.
dhirend_6d said:
O__O, All custom ROMs are rooted I suppose. And yes Sentinel ROM is rooted.
Click to expand...
Click to collapse
yes, saw it. its a custom rom. tried wipe data / cache but didn't work. will try to install custom rom sentinel now.
was able to install the custom rom but kept on rebooting after few minutes. it already happened thrice now.
anything i am missing?
It could be the insecure kernel you used earlier is making it unstable, probably if the custom rom doesn't install a kernel. Only thing I can think of is install an official Samsung g3 rom which should repair all the partitions that might of been damaged or corrupted, use it for a while to make sure no reboots. Then go through root and install of custom rom again. In theory creating a good foundation to install a custom rom on.
Just out of curiosity did u download an official Samsung rom before starting to flash in case u need to send it away or sell it on? If not what network/country are u using? Is the phone locked to the network or unlocked?
Edit:- I never used a kernel flash to root my phone just used cf root 6.4 to get root and custom recovery cwm. I only changed my recovery this weekend to Phil touch.
Sent from my GT-I9300 using xda premium
SwiftSmoke said:
It could be the insecure kernel you used earlier is making it unstable, probably if the custom rom doesn't install a kernel. Only thing I can think of is install an official Samsung g3 rom which should repair all the partitions that might of been damaged or corrupted, use it for a while to make sure no reboots. Then go through root and install of custom rom again. In theory creating a good foundation to install a custom rom on.
Edit:- I never used a kernel flash to root my phone just used cf root 6.4 to get root and custom recovery cwm. I only changed my recovery this weekend to Phil touch.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
hi swiftsmoke!
I tried reset and wipe 4x before i installed the rom. works perfect now!
THANK YOU SO MUCH!!!!
:good::good::good::good::good::good::good::good::good::good::good::good::good::good:
I tried updating Cyanogenmod but needed the new gapps, but unfortunately I installed the wrong one. Now I have no way to access my phone as I can only see "Unfortunately, Setup Wizard has stopped". On top of that, whenever I try to boot into recovery to install the correct gapps, I am greeted by a blank screen. I have tried reinstalling the recovery with Odin and I am getting the same thing. Any help?
Full wipe or flash stock fw via Odin
Use Odin if you can boot to OS and reflash recovery of choice.
youngnex said:
Use Odin if you can boot to OS and reflash recovery of choice.
Click to expand...
Click to collapse
I'm able to boot to OS, I just can't do anything in the OS. I've tried flashing a recovery with odin and all I get is a blank screen
flash fw via Odin, other help
misacek said:
flash fw via Odin, other help
Click to expand...
Click to collapse
Do you know where I can get the firmware for a Verizon galaxy S3? I've never had to get it before.
here
http://www.sammobile.com/forum/forum.php
---------- Post added at 09:53 PM ---------- Previous post was at 09:53 PM ----------
Registration must be
HI all
My phone is stuck at boot animation.
My custom recovery is working (CWM 5.5.0.4) and i am able to flash different roms.
Even i am able to flash via odin.
But after reboot all roms are getting stuck at boot animation
I tried CM and sammy based both type of roms but same result.
BUT I FOUND ONE PROBLEM WHENEVER I TRY TO FORMAT DATA IN RECOVERY IT GIVES ERROR "ERROR MOUNTING DATA"
Please help me i even tried CM 9 but same result
quaker1985 said:
HI all
My phone is stuck at boot animation.
My custom recovery is working (CWM 5.5.0.4) and i am able to flash different roms.
Even i am able to flash via odin.
But after reboot all roms are getting stuck at boot animation
I tried CM and sammy based both type of roms but same result.
BUT I FOUND ONE PROBLEM WHENEVER I TRY TO FORMAT DATA IN RECOVERY IT GIVES ERROR "ERROR MOUNTING DATA"
Please help me i even tried CM 9 but same result
Click to expand...
Click to collapse
your cwm recovery is way too old buddy! upgrade to the latest touch cwm or philz touch recovery!
just updated to new recovery CWM 6.0.3.2 touch, still same problem
quaker1985 said:
just updated to new recovery CWM 6.0.3.2 touch, still same problem
Click to expand...
Click to collapse
did you try flashing stock firmware via odin? then factory reset?
sriram231092 said:
did you try flashing stock firmware via odin? then factory reset?
Click to expand...
Click to collapse
sorry i missed in first post but THANKS for such a quick reply.
I tried 4.2.2 leaked firmware(from sammobile) via ODIN.
If i need to flash any other stock rom PLEASE provide me link for the same
quaker1985 said:
sorry i missed in first post but THANKS for such a quick reply.
I tried 4.2.2 leaked firmware(from sammobile) via ODIN.
If i need to flash any other stock rom PLEASE provide me link for the same
Click to expand...
Click to collapse
download the latest version of 4.1.2 of your country from www.sammobile.com. flash it via odin and then factory reset from the stock recovery. you should be able to boot into rom.
OK i m downloading the firmware let me try it
OK i flash stock file with odin, but now my phone is stuck in bootloop.
During this bootloop notification light stays on all time.
quaker1985 said:
OK i flash stock file with odin, but now my phone is stuck in bootloop.
During this bootloop notification light stays on all time.
Click to expand...
Click to collapse
did you factory reset from recovery immediately after flashing?
sriram231092 said:
did you factory reset from recovery immediately after flashing?
Click to expand...
Click to collapse
THanx a million
it booted
thank you thank you
PS
Is it ok if i try another rom
because i m afraid flashing again and again will cause further problems
quaker1985 said:
no
Click to expand...
Click to collapse
then do it buddy! it is required
---------- Post added at 09:31 AM ---------- Previous post was at 09:03 AM ----------
quaker1985 said:
THanx a million
it booted
thank you thank you
PS
Is it ok if i try another rom
because i m afraid flashing again and again will cause further problems
Click to expand...
Click to collapse
you have a button to click and edit the thread title to solved.
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
chullan88 said:
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
Click to expand...
Click to collapse
At first flash a Samsung firmware through Odin: http://forum.xda-developers.com/showthread.php?t=1424997
I recommend you not using Rom Manager. Have a look at PhilZ's thread for having a safe kernel and custom recovery to be able to backup and flash what you want.
doubt
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
chullan88 said:
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
Click to expand...
Click to collapse
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Primokorn said:
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Click to expand...
Click to collapse
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
chullan88 said:
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
Click to expand...
Click to collapse
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Primokorn said:
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Click to expand...
Click to collapse
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
chullan88 said:
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
Click to expand...
Click to collapse
Yes you can but the most important thing on N7000 is to have a SAFE kernel before wiping or flashing from recovery. (more details in the N7100 sections)
Here are the general instructions to flash a new custom rom:
1. Having root and a working custom recovery (updated)
2. Boot into recovery mode (VOL DOWN + POWER + HOME) then VOL UP to accept the warning.
3. Make a Nandroid backup and backup your EFS.
4. Full wipe: wipe data (factory reset), cache, dalvik and system. Recoveries are different. You may need to go to another menu to format the system partition.
5. Flash rom
6. Flash Gapps
7. Reboot normally
Hi there,
Havin a little issue with my girlfriends i9100. Flashed clockwork recovery and cm12. 1 but somehow the recovery changed to cyanogenmod recovery and i cant seem to get rid of it in order to install gapps. Neither heimdall nor adb did work in order to Flash twrp. Flashify/twrp Manager didnt work for gapps flash either. Any suggestions?
Jogoe said:
Hi there,
Havin a little issue with my girlfriends i9100. Flashed clockwork recovery and cm12. 1 but somehow the recovery changed to cyanogenmod recovery and i cant seem to get rid of it in order to install gapps. Neither heimdall nor adb did work in order to Flash twrp. Flashify/twrp Manager didnt work for gapps flash either. Any suggestions?
Click to expand...
Click to collapse
You could try this:
Download latest cm 11 nightly
In cm recovery got to apply update and flash cm11.
Reboot then in recovery (should be cwm) flash again latest cm 12.1 together with "isorec- twrp recovery 3.0.2-1.zip by the.gangster" in one go (important!)
Then you have latest twrp for flashing anything and also for incrasing partition (System/data) for flashing bigger packages of gapps or cm 13 with gapps (here incrasing System and data partition is a "must")
Sent from my STAIRWAY using XDA-Developers mobile app
---------- Post added at 01:46 PM ---------- Previous post was at 01:41 PM ----------
Just to add: i never tried to flash twrp.zip in cm recovery so i am not sure if it works (would save some Step from above
Sent from my STAIRWAY using XDA-Developers mobile app
Jogoe said:
Hi there,
Havin a little issue with my girlfriends i9100. Flashed clockwork recovery and cm12. 1 but somehow the recovery changed to cyanogenmod recovery and i cant seem to get rid of it in order to install gapps. Neither heimdall nor adb did work in order to Flash twrp. Flashify/twrp Manager didnt work for gapps flash either. Any suggestions?
Click to expand...
Click to collapse
Hi Friend,
CM official roms come with default recovery mode just like the official google roms have there official recoveries cm have.
here is what you will do what you need to do (I use Odin)
NOTE:don't Restart your phone, you have to make the steps from 2 to 4 without restart
1-Install any recovery or kernel from Odin to your mobile (that is the only way to get rid of cm recovery) VERY IMPORTANT!!!
2- open the recovery you installed and flash the rom that you want
3- flash the gapps (optional)
4- flash this file https://dl.twrp.me/i9100/twrp-3.0.2-0-i9100.img (VERY IMPORTANT To Be In The Same Order)
now restart your phone your phone must open now with the new rom, open the recovery mode after the restart to check
VERY IMPORTANT reply to me, I want to know if it worked with you
Thanks,
M.FANDIES said:
Hi Friend,
CM official roms come with default recovery mode just like the official google roms have there official recoveries cm have.
here is what you will do what you need to do (I use Odin)
NOTE:don't Restart your phone, you have to make the steps from 2 to 4 without restart
1-Install any recovery or kernel from Odin to your mobile (that is the only way to get rid of cm recovery) VERY IMPORTANT!!!
2- open the recovery you installed and flash the rom that you want
3- flash the gapps (optional)
4- flash this file https://dl.twrp.me/i9100/twrp-3.0.2-0-i9100.img (VERY IMPORTANT To Be In The Same Order)
now restart your phone your phone must open now with the new rom, open the recovery mode after the restart to check
VERY IMPORTANT reply to me, I want to know if it worked with you
Thanks,
Click to expand...
Click to collapse
Hi
Just want to mention 2 things:
You cannot use any recovery to install cm12 of above. It must be at least a KK compatible recovery.
And not all recoveries can flash .img-files (and the latest version of twrp is 3.0.2-1 of which @the.gangster made a .zip-file for us to use).
Regards
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
Hi
Just want to mention 2 things:
You cannot use any recovery to install cm12 of above. It must be at least a KK compatible recovery.
And not all recoveries can flash .img-files (and the latest version of twrp is 3.0.2-1 of which @the.gangster made a .zip-file for us to use).
Regards
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
sorry for mistakes i have Focused on the Isorec Bec It Have Been a long time from the last time i used it as i have no more i9100
and sure the hard point isnt the compatable recovery it is easy to find and as he have flashed an official cm12.1 rom then he have a working one
am i right or not
thanks,
M.FANDIES said:
sorry for mistakes i have Focused on the Isorec Bec It Have Been a long time from the last time i used it as i have no more i9100
and sure the hard point isnt the compatable recovery it is easy to find and as he have flashed an official cm12.1 rom then he have a working one
am i right or not
thanks,
Click to expand...
Click to collapse
Yes your instructions are correct when using kk recovery and isorec- rec .zip.
Of course there are more ways to do it like by the great @Lanchon in this thread (MOD) IsoRec: Isolated recovery for Galaxy S 2 on Page 53 Post # 529.
Regards
Sent from my STAIRWAY using XDA-Developers mobile app
Thank u guys, i will try and report back next week!
TriboDoP said:
Yes your instructions are correct when using kk recovery and isorec- rec .zip.
Of course there are more ways to do it like by the great @Lanchon in this thread (MOD) IsoRec: Isolated recovery for Galaxy S 2 on Page 53 Post # 529.
Regards
Sent from my STAIRWAY using XDA-Developers mobile app
Click to expand...
Click to collapse
lol thanks! you can actually link posts by right-clicking on the #NNN at the top right corner of each post and selecting "Copy link address"...
http://forum.xda-developers.com/showpost.php?p=69118100&postcount=529
Lanchon said:
lol thanks! you can actually link posts by right-clicking on the #NNN at the top right corner of each post and selecting "Copy link address"...
http://forum.xda-developers.com/showpost.php?p=69118100&postcount=529
Click to expand...
Click to collapse
Thanks!
I never bothered about it but it will save me some typing in the future.
TribodoP
Sent from my STAIRWAY using XDA-Developers mobile app
Anyone here care to share stock firmware? Looking for one and Sammobile's server is down..
---------- Post added at 11:56 AM ---------- Previous post was at 11:42 AM ----------
Disregard the above request.. I've got the download working..