this is related to the common sound glitch in 4.4.3 (And .2, i don't remember)
stick headphones in.
start playing music.
go to settings to adjust notification/ringtone volume.
adjust notification/ringtone volume.
press ok.
notice how for a second music plays through the phone speaker.
Does anyone else consider this a significant bug?
'cause for me it is at least inconvenient
listening to headphones, try to lower the ringtone volume to not disturb people next to me and it goes BRP.
Related
I'm coming from a D1 and was used to its speaker volume. I've noticed that in most all apps (skype, youtube, sirius xm) my Tbolt's output volume is pretty low. I've got the slider up as high as it goes, and it doesn't come close to the output of my last phone. Is this something with the ROM I'm running? Are people with stock phone's noticing the same problem? Is there a setting I'm missing?
Thanks
Did you change the media volume in sound settings or just the overall volume of the phone?
It doesn't seem to matter what the volume is set to, my media volume (almost) always has a slash through it and doesn't play media sounds (games, music, etc). I'm not sure what causes it or how I can fix it. The phone seems to do it randomly.
It hasn't always been this way, it comes and goes. I've watched Netflix and heard the music to Tiny Tower which both use the Media volume. Restarting my phone has shown to help at times but so far it always comes back. I'm hoping a firmware update can fix it.
I have no audio apps for monitoring volumes and none of the Motion settings that would affect audio are turned on. I keep my phone on vibrate 24/7 but still wish to have the media volume work separately than the ringer volume. I have (self-taught) experience in rooting, applying mods, general android app development, as well as every day usage with the android OS and this has me incredibly annoyed that I can't figure this out.
How can I explicitly mute/unmute my media volume?
Stock, no root, Sprint Samsung Galaxy S III (SPH-L710) Android 4.0.4 Hardware version L710.14
Do you mute/ vibrate from notifications - I can imagine that will override the sound settings. Set ringtone to zero and media to desired level?
No, I only ever change the volume through the volume rocker when I'm in an app that uses the media volume. I also never change the volume of notifications, they're muted and set to vibrate. The only volume I ever use or change is the media volume.
So I don't know if many or any other people are having or have had this problem(could be related specifically to my car, but unlikely as you'll see later), but I feel like I've heard others mention it. I've now had this issue on multiple roms, from saurom 7.1 GB to now PA cm10 2.0 with flapps OC kernel.
The problem:
When connected to the car stereo via Bluetooth, I'd lose volume control on the dash and only have its control on the phone.
Why does this suck?
Well having to do this to adjust volume can be very annoying for several reasons, like:
1. Having to grab the phone every time you want to adjust the volume
2. Slower volume increases and decreases
3. Depreciating the phone hardware faster
4. Scaling the volume in much bigger, less precise(sometimes it will be either too loud/soft) increments
5. Potentially much lower overall loudness (depending on where the car's own volume was at when it lost control)
6. Potentially more distortion (raising the phone's volume to max to compensate increases distortion regardless of where car volume is at).
What I soon began to realize is that it happens from certain apps, like Pandora (which is usually my go to), but not for the system standard music app like Apollo (which is why I don't think the problem source is related to my car).
So, the work around I figured out for myself is loading both, pausing Pandora, playing Apollo to get volume control, then holding down the back button to kill Apollo(make sure this is enabled in developer options in phone settings), then Pandora should start playing again all by itself and still have volume control. Haven't tested it yet on other music apps, but I suspect it should work the same.
Hope this helps if anyone else had this problem.
Sent from the Jelly Way Galaxy
Same Problem...
Afishl1 said:
So I don't know if many or any other people are having or have had this problem(could be related specifically to my car, but unlikely as you'll see later), but I feel like I've heard others mention it. I've now had this issue on multiple roms, from saurom 7.1 GB to now PA cm10 2.0 with flapps OC kernel.
The problem:
When connected to the car stereo via Bluetooth, I'd lose volume control on the dash and only have its control on the phone.
Why does this suck?
Well having to do this to adjust volume can be very annoying for several reasons, like:
1. Having to grab the phone every time you want to adjust the volume
2. Slower volume increases and decreases
3. Depreciating the phone hardware faster
4. Scaling the volume in much bigger, less precise(sometimes it will be either too loud/soft) increments
5. Potentially much lower overall loudness (depending on where the car's own volume was at when it lost control)
6. Potentially more distortion (raising the phone's volume to max to compensate increases distortion regardless of where car volume is at).
What I soon began to realize is that it happens from certain apps, like Pandora (which is usually my go to), but not for the system standard music app like Apollo (which is why I don't think the problem source is related to my car).
So, the work around I figured out for myself is loading both, pausing Pandora, playing Apollo to get volume control, then holding down the back button to kill Apollo(make sure this is enabled in developer options in phone settings), then Pandora should start playing again all by itself and still have volume control. Haven't tested it yet on other music apps, but I suspect it should work the same.
Hope this helps if anyone else had this problem.
Sent from the Jelly Way Galaxy
Click to expand...
Click to collapse
This is my first post so bare with me. I have been wanting to use cm10 but I have the same exact problem. In my 2012 scion xb I have bt audio and use spotify and tune in radio for everything. I was using the same method as you to control volume, but when i used synergy rom for my s3 I had the car controls (dash and steering wheel) back. Although I have to re-link the bt every time I Turn my car off.... didn't have to do that with my tbolt, it stayed lined even after i shut my car on and off. Still love my s3 better though lol
I bought my Galaxy S3 (UK version) when they first came out, but recently had to have the motherboard replaced under warranty due to the phone suffering from Sudden Death.
Before the repair, the audio output via my earbud headset was perfect, but now I'm getting a persistent and annoying low-level background hiss. This is not affected in the slightest by the volume control - even at the lowest volume setting the hiss is still present at the same level. It lasts for about 4 seconds after audio playback has finished, and then stops with a slight click/pop as the audio circuit shuts down.
You can also hear it from the rear-panel speaker if you put it close to your ear and perform any action which causes a noise to be generated - e.g. keypress clicks or the notification tones when you press the volume rocker (just make sure volume is set low first though, as that speaker can be loud when you've got your ear up against it!)
I've done some checking and it's definitely hardware related - nandroid restoring my old ROM doesn't make any difference. It is really annoying when I'm listening to music at night in bed, usually at the lowest volume setting, as the hiss is much more noticeable without other ambient noises to drown it out.
There were a number of reports of similar issues last year but not everyone seemed to be affected, and the threads all seem to have dried up now. I'm wondering how many 'original' S3 users have this problem, versus more recent purchasers? I've added a poll, just to see how widespread this issue is - please treat any phone where the motherboard has been replaced for Sudden Death issues as a 'recent' phone.
And how do I go about getting it fixed if the current motherboards all seem to have the same fault? Is there any low-level firmware setting to reduce the physical gain of the internal audio amp circuit, as it does seem to be happening in the final stages of audio output rather than in the software-controlled stuff? I'm not worried about losing the top end of the volume range, I use bluetooth for more amplified playback anyway.
Andre
Background hiss / noise no and thats from one of the very first SGS3 .
But a fair number of the sound mods do add noise .
>>>is is not affected in the slightest by the volume control - even at the lowest volume setting the hiss is still present at the same level. It lasts for about 4 seconds after audio playback has finished, and then stops with a slight click/pop as the audio circuit shuts down.<<<<
That has been well posted up on XDA hiss + pop click on shutdown as you said long time ago .|Not seen any user posting really since those threads died . Most are just looking for more loud or more boom boom .
A number of kernels now have sound adaptations .
jje
Yeah, I first put it down to some sort of audio mod in the ROM that I had installed, so I nandroided back to the vanilla JB that was in the phone when I picked it back up from repair, and even back to my older ICS stock ROM (which had no audio mods at all) and they were all exactly the same.
Sound tweaks are all going to effect the source sound digitally, before it hits the analogue amp stage, and I suspect it's the final analogue stage which is generating the interference.
I don't care for lots of volume or boom boom (and anyway, I have amplifiers or car audio for that) but I do want my original lovely hissless audio quality back...
Andre
Do you still get the hissing with a good sound enhancing kernel (such as boeffla)? If you do, sounds like you have a hardware problem
Sent via TCP/IP
Ah, I didn't know some kernels were better than others for noise reduction. Although I'm not so interested in 'enhancing' per se, more reducing! But the problem I'm getting is not effected by the volume controls at all, the hiss remains constant whatever any of the level sliders are set to, just as long as the audio circuits are enabled.
The ROM I'm currently running is Omega AOKP v7.0, which is based on AOKP JB 4.2.2 milestone-1 and stock kernel. Is there a suitable kernel compatible with that which might help me does anyone know? (boeffla isn't as far as I can tell)
Andre
andrewilley said:
Before the repair, the audio output via my earbud headset was perfect, but now I'm getting a persistent and annoying low-level background hiss. This is not affected in the slightest by the volume control - even at the lowest volume setting the hiss is still present at the same level. It lasts for about 4 seconds after audio playback has finished, and then stops with a slight click/pop as the audio circuit shuts down.
You can also hear it from the rear-panel speaker if you put it close to your ear and perform any action which causes a noise to be generated - e.g. keypress clicks or the notification tones when you press the volume rocker (just make sure volume is set low first though, as that speaker can be loud when you've got your ear up against it!)
Click to expand...
Click to collapse
My SGS3 is about 9 months old, and I have this too. However, in my case the background hiss is at an extremely low level - to all practical intents it's inaudible. Certainly not enough to be annoying, even in the quietest of environments.
Hi, when i am listening to music on my head phones and a text comes through it defaults to this loud beeping noise. If i play around with the volume/sounds long enough it will change to the notification sound that i originaly set, and the volume is much lower. The second i unplug my head phones and plug them back in the default loud beeping notification is present.
Is there sonething that i am missing? When listening to music on my headphones I just want the notification noise to be the the sound i initially chose (when my headphones are unplugged) and not the default beeping noise.
I think this is so that it's easier to hear? I'm not sure. I like the beeping noise actually.
Interestingly, in Settings > Message, you'll find the Tone and Vibrate options disabled...