So, I've got an iRola DX752 that I'm trying to make a custom CWM recovery for using the online builder. But, everything I put in the files and let it do it's building thing and I click on the build server link, all I get is a 404 error!
So, is this thing not working anymore or am I just doing something wrong?
Also, I've tried modifying the fstab to get everything to mount properly for my tablet(original issue), so any help there would be greatly appreciated as well!
Same here. I keep uploading my image, and it doesn't do anything or a get the 404 on the build server.
Related
So, ever since my note came out I've been running just the stock, and recently rooted it to get rid of some bloat. I've been waiting for a good point to hop over to CM10 and I think now is a good time (CM10 M2 release, OTA update ability, etc).
The question is - HOW? I've not had much luck finding docs online for it, and the ones that are there are months old and refer to needing to be on CM9 first. Is that still accurate?
So here's the Q: can someone point me to the latest install doc for putting CM10 on a Note? I've got CWM 5.5.0.4 installed but otherwise running stock everything.
Much appreciated, TIA!
I found this:
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Note_(AT&T):_Full_Update_Guide
Which would be fine - except that the cyanogen CWM recovery tar.md5 file is corrupt. Checksum is not what they post and untarring the file at all gets lots of early EOF errors.
[email protected]:~$ cat recovery-cwm-quincyatt.tar.md5.md5
a377cc819926c910b1974b38d9143f02 recovery-cwm-quincyatt.tar.md5
[email protected]:~$ md5sum recovery-cwm-quincyatt.tar.md5
f3e92c325e876ec771247e2375e53cd7 recovery-cwm-quincyatt.tar.md5
Hello tigerknight,
I just responded to your cyanogenmod post (just copied and pasted here), here it is:
"...This was definitely frustrating for me...had to search and search and found that I couldn't use cwm (I had touch 5.5.0.4, but also was having issues with non-touch version) to install cyanogenmod; I tried goomanager from the Play and installed twrp recovery image and it installed without a hitch.
Kind of a pain because I have mostly used cwm recovery (very simple to use) and love it.
Hope that helps "
I was able to dig out my own solution and wrote a post/doc for it, in case anybody else needs similar info.
http://forum.xda-developers.com/showthread.php?t=1958944
First I would like to say I have gone through a lot of postings looking for an answer to my question so I have looked for my own answers. I also went through many sites outside of this one and haven't found a answer yet. I flashed UltraJack-Recovery v4.6.2 and then installed LeanFUSION V2 and this all went fine. I then decided to restore the original rom and discovered it was corrupted. After two days I finally found a download site that wasn't just a dead link and got the STOCK_ROM_USA_TMO which is 98.6mb. When I tried to install this rom I get " E:No signature (6 files) E:Verification failed Installation aborted." I actually get this type of message with most of the roms I tried. The amount of signatures missing varies but same sort of thing. Anyone who could provide me with a confirmed working factory rom or help with getting the one I have working would be really appreciated. Thanks for any help folks!!
Okay I decided to try installing Clockworkmod Recovery to my u8150 to see if I could get back to the original rom. The Google Apps version doesn't support the Ideos and I am having trouble figuring out how to install the 5.0.2.8 Clockworkmod Recovery by fastboot. I hate to ask for hand holding but I can't seem to figure this out. I really would like to have a bit more variety in roms I can install or returning to the factory rom but the UltraJack Recovery won't get past the unsigned or non verified sections of the roms I want to install. There has got to be someone out there who can help with this stuff. Thanks for any help.....
Hello, Im trying out custom ROMs in livesuit images as I have a Allwinner A10 tablet. recently I got a JB image of LY-F1 with kernel 3.0.8+ which is same as my stock kernel though build dates are different. Anyways, I first tried to push my goodix touch module in system/vendor/module and then ran insmod and it gave me (Exec format error) and dmesg tell goodix_touch disagrees about symbol layout etc. So I tried to push all my old modules of stock,change the boot image,bootloader image and the reboot. this caused it to go on a bootloop. I couldnt figure out where I got wrong. Pls can someone shed light on it. I need help. Im thinking of building a whole kernel from scratch and then trying it. But can figure out if it will work work with the LY-F1 image or not. Can someone be kind enough to answer that WILL A NEW KERNEL+MODULE BOOT WITH ANY OTHER EXISTING IMAGE, OR WILL I HAVE TO BUILD AOSP+KERNEL TO MAKE IT SUPPORT AND BOOT.
i too tried to upgrade to CM 10 mod and faced the same... i tried copying the modules from original firmwas and overwrite to cm 10 modules... but the system refuse to load the modules... later on googling , i found out it may because the firmware driver compiled for one version will not be applicable for another build.. so we need to rebuild the drivers for this particular version...
my tab : ice extreme tab
cybermate123 said:
Hello, Im trying out custom ROMs in livesuit images as I have a Allwinner A10 tablet. recently I got a JB image of LY-F1 with kernel 3.0.8+ which is same as my stock kernel though build dates are different. Anyways, I first tried to push my goodix touch module in system/vendor/module and then ran insmod and it gave me (Exec format error) and dmesg tell goodix_touch disagrees about symbol layout etc. So I tried to push all my old modules of stock,change the boot image,bootloader image and the reboot. this caused it to go on a bootloop. I couldnt figure out where I got wrong. Pls can someone shed light on it. I need help. Im thinking of building a whole kernel from scratch and then trying it. But can figure out if it will work work with the LY-F1 image or not. Can someone be kind enough to answer that WILL A NEW KERNEL+MODULE BOOT WITH ANY OTHER EXISTING IMAGE, OR WILL I HAVE TO BUILD AOSP+KERNEL TO MAKE IT SUPPORT AND BOOT.
Click to expand...
Click to collapse
I am getting the "Magic Value Mismatch" like the threads created by anosis, offload, and Fabodabo31. All the threads answers point to NVFlash being the fix. However the link to the download is broken with the following message:
Access to this link has been disabled. Please ask the owner of the shared link to send a new link to access the file or the folder.
Click to expand...
Click to collapse
I was going to ask for a new link on the thread, but it's locked. So where do I get it now? Heck I don't even know if it will be the solution. I really don't care as long as I get it working. I flashed an unstable ROM running JB 4.1 and things were crashing every 5-10 minutes, so I wiped and tried the step down, ICS, with the same results. So I wiped and I went to go install the previous ROM I had (CM 7.2). However when it booted, it wouldn't get past the CM boot animation. I left it for 12 hours before I finally rebooted to recovery to re-flash it. I wiped like usual, and used install from zip - but the CM installer aborted with errors. I tried re-wiping 17 times without luck. Finally I wiped EVERYTHING under mounts and storage. Then it began an oh, so lovely boot loop. I could get into recovery by turning it off while it was on so it didn't just continue the power cycle and then use the recovery key combo. Once in recovery I managed to get it to stop the boot loop, but I don't remember how. It then would just give something like could not boot or no bootable media or something along that line, I don't remember it exactly. I got frustrated with it and put it down for like 8 months, now it's a necessity that I get it working. So, I tried putting the CM installer on my sdcard and using the install zip from sd. It said it could not find anything. So I renamed it to update.zip and used install update.zip from sdcard. Not found. So I tried rebooting with it in the device. It gave me the "Magic Value Mismatch" error. I was scratching my head in confusion over this one. I figured it was like a bad sha sum or something so I tried to reboot to recovery. It gave me the same error. So I pulled the sd and tried again. No change. I was beginning to panic at this point so I took a deep breath and searched it. I found anosis's post and the answers referred to NVFlash. From there the rest just fell in line to now.
Bump
Sincerely,
Patrick Thomas (Timberwolf)
Timberwolf Programmers Owner & Founder
---- Sent from Tapatalk ----
So I was able to make a custom recovery but it's a little rough around the edges . It boots up fine but I can't get decryption to work. I've been trying everything possible I can find to fix it but no matter what, i can't access data after leaving recovery mode. I'm tired of formatting my phone just for it to not work lmfao. If anybody knows what they are doing and can lend a hand with getting decryption to work please let me know. Here's the link to my build tree https://github.com/jbhacktheplanet/lenovo_doom