Sprint to HTC ONE MAX back 2 stock - HTC One Max

Could some please post a step by step tutorial on how to revert back to stock to be able to receive the ota's ??? I saw some of the other guides but I did understand them.. Thanks
Sent from my HTC0P3P7 using XDA Free mobile app

Stevesteve64 said:
Could some please post a step by step tutorial on how to revert back to stock to be able to receive the ota's ??? I saw some of the other guides but I did understand them.. Thanks
Sent from my HTC0P3P7 using XDA Free mobile app
Click to expand...
Click to collapse
1. Download RUU http://flyhalf205.com/RUU/t6spr/0P3..._NV_SPCS_4.50_003_release_338466_signed_2.zip
2. Backup your internal storage. RUU will wipe your internal storage clean.
3. Boot into fastboot
4. type command "fastboot oem rebootRUU" without the quotations
5. fastboot flash zip 0P3PIMG_T6_WHL_JB43_SENSE55_SPCS_Sprint_WWE_1.14.651.1_Radio_1.30.50.1022_NV_SPCS_4.50_003_release_338466_signed_2.zip

Flyhalf205 said:
1. Download RUU http://flyhalf205.com/RUU/t6spr/0P3..._NV_SPCS_4.50_003_release_338466_signed_2.zip
2. Backup your internal storage. RUU will wipe your internal storage clean.
3. Boot into fastboot
4. type command "fastboot oem rebootRUU" without the quotations
5. fastboot flash zip 0P3PIMG_T6_WHL_JB43_SENSE55_SPCS_Sprint_WWE_1.14.651.1_Radio_1.30.50.1022_NV_SPCS_4.50_003_release_338466_signed_2.zip
Click to expand...
Click to collapse
Hey thanks for the help!!!! I'm downloading the file now!. After the file finishes, I need to place it in the same folder where the fastboot files etc are right???

Stevesteve64 said:
Hey thanks for the help!!!! I'm downloading the file now!. After the file finishes, I need to place it in the same folder where the fastboot files etc are right???
Click to expand...
Click to collapse
Yep. This will be 4.3 android. So you'll have a few OTA probably.

Ok when I tried to flash, this is the error I got..... What did I do wrong?
C:\miniadb_m7>adb devices
List of devices attached
FA3B5SC01025 device
C:\miniadb_m7>adb reboot bootloader
C:\miniadb_m7>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.040s]
finished. total time: 0.042s
C:\miniadb_m7>fastboot flash zip 0P3PIMG_T6_WHL_JB43_SENSE55_SPCS_Sprint_WWE_1.1
4.6 51.1_Radio_1.30.50.1022_NV_SPCS_4.50_003_release_3 38466_signed_2.zip
target reported max download size of 1542111232 bytes
error: cannot load '0P3PIMG_T6_WHL_JB43_SENSE55_SPCS_Sprint_WWE_1.14.6': No erro
r
C:\miniadb_m7>

@Stevesteve64
Try typing in fastboot flash zip .... After typing that. drag and drop the .zip file into the command prompt window and then press enter

wow OK ITS DOING IT!!!!!!! THANKS!!!! i'll let you know the resutls

did something go wrong??
C:\miniadb_m7>fastboot flash zip C:\miniadb_m7\0P3PIMG_T6_WHL_JB43_SENSE55_SPCS_
Sprint_WWE_1.14.651.1_Radio_1.30.50.1022_NV_SPCS_4.50_003_release_338466_signed_
2.zip
target reported max download size of 1542111232 bytes
sending 'zip' (1271680 KB)...
OKAY [ 62.466s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail

Stevesteve64 said:
did something go wrong??
C:\miniadb_m7>fastboot flash zip C:\miniadb_m7\0P3PIMG_T6_WHL_JB43_SENSE55_SPCS_
Sprint_WWE_1.14.651.1_Radio_1.30.50.1022_NV_SPCS_4.50_003_release_338466_signed_
2.zip
target reported max download size of 1542111232 bytes
sending 'zip' (1271680 KB)...
OKAY [ 62.466s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
Click to expand...
Click to collapse
You s-off?

Flyhalf205 said:
You s-off?
Click to expand...
Click to collapse
yes im s off

Stevesteve64 said:
yes im s off
Click to expand...
Click to collapse
I guess try it again. Might be a bad download or the ruu itself. But you can try the .exe version of the RUU...
http://flyhalf205.com/RUU/t6spr/RUU..._NV_SPCS_4.54_003_release_340074_signed_2.exe

Flyhalf205 said:
I guess try it again. Might be a bad download or the ruu itself. But you can try the .exe version of the RUU...
http://flyhalf205.com/RUU/t6spr/RUU..._NV_SPCS_4.54_003_release_340074_signed_2.exe
Click to expand...
Click to collapse
ok with the exe ruu do I need to do the adb commands again?

Stevesteve64 said:
ok with the exe ruu do I need to do the adb commands again?
Click to expand...
Click to collapse
Shouldn't need too. Just run the .exe

Ok.... I also meant to put in the Original post that I am S OFF and Unlocked..... That's not a problem right??

Stevesteve64 said:
Ok.... I also meant to put in the Original post that I am S OFF and Unlocked..... That's not a problem right??
Click to expand...
Click to collapse
Not a problem.

Flyhalf205 said:
Not a problem.
Click to expand...
Click to collapse
ok I just did the exe file... And it started then Came back with an unknown error.... I wonder what could be the problem?? Is it because im on the 2.49 bootloader?

Stevesteve64 said:
ok I just did the exe file... And it started then Came back with an unknown error.... I wonder what could be the problem?? Is it because im on the 2.49 bootloader?
Click to expand...
Click to collapse
As long as your s-off your good. I am not really sure what the problem here is.

Flyhalf205 said:
As long as your s-off your good. I am not really sure what the problem here is.
Click to expand...
Click to collapse
Wow man this is crazy!!! Yeah just looked at my bootloader just to make sure... it says Tampered and unlocked

Stevesteve64 said:
Wow man this is crazy!!! Yeah just looked at my bootloader just to make sure... it says Tampered and unlocked
Click to expand...
Click to collapse
Did you do the fastboot flash zip twice?

Flyhalf205 said:
Did you do the fastboot flash zip twice?
Click to expand...
Click to collapse
Well after it failed the first time... I did it over

Related

[Q] Need help going from a non-sense rom to a sense rom, I think...

Okay, a little background here:
HTC Evo 4G LTE
Android Version: 2.3.3
Baseband Version: 2.15.00.11.19
Kernel Version 2.6.37.4-cyanogenmod
Mod Version: 7.0.3.1-supersonic
Okay so i acquired this phone in a trade (upgrading from a Evo 4G) and have attempted to activate it with my sprint number. Every time I get to the step where I have to press ##etc... the phone will not cooperate. From what I understand, this is due to the lack of sense.
I have clockwork recovery premium installed and am familiar with the procedure for flashing a rom. I just need someone to point me in the right direction of which rom I need to install/do other things to get this phone activated.
Any help would be greatly appreciated! If any additional info is needed, please let me know! Thanks!
Grab one of the roms from the development section like meanrom and flash it over, wipe the phone first, if you have any trouble booting to android fastboot the kernel
om4 said:
Grab one of the roms from the development section like meanrom and flash it over, wipe the phone first, if you have any trouble booting to android fastboot the kernel
Click to expand...
Click to collapse
Thank you for the fast response.
Well, I may have already messed up. I saw the check for updates button in clockwork recovery and downloaded the newest cyanogen mod that it recommended ( 7.2. something I think, I can't remember). I flashed it and it is now stuck on the boot logo.
Could I apply the fastboot thing you are talking about to this situation? If so, how do I do that on windows 7? Sorry for my ignorance.
Just grab a sense Rom like mean and flash it, it has a kernel installer built in. You really should be using teamwin recovery
http://db.tt/zyPbGmtO
Extract that and open cmd inside the folder, connect to fastboot and type fastboot flash recovery openrecovery-twrp-2.2.2.0-jewel.img and once that's done flash meanrom
om4 said:
Just grab a sense Rom like mean and flash it, it has a kernel installer built in. You really should be using teamwin recovery
Extract that and open cmd inside the folder, connect to fastboot and type fastboot flash recovery openrecovery-twrp-2.2.2.0-jewel.img and once that's done flash meanrom
Click to expand...
Click to collapse
okay i did the steps to the best of my understanding and i got this response in cmd.
recovery-twrp-2.2.2.0-jewel.i
sending 'recovery' (7356 KB).
OKAY [ 1.901s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.902s
Any suggestions?
Hmm so write failed, odd
Gotta think about this one, maybe someone else has a solution already
om4 said:
Hmm so write failed, odd
Gotta think about this one, maybe someone else has a solution already
Click to expand...
Click to collapse
I can still access my clockwork recovery. Could I just put the mean rom on an sd card and flash it through clockwork? Thanks for your help.
Cwm is not very reliable on our phones. Try it but if it doesn't boot you will need to extract boot.img and place it in the adb folder and flash it using fastboot flash boot boot.img
om4 said:
Cwm is not very reliable on our phones. Try it but if it doesn't boot you will need to extract boot.img and place it in the adb folder and flash it using fastboot flash boot boot.img
Click to expand...
Click to collapse
Okay, so I attempted to flash through clockwork recovery and got this message
"Error in /sdcard/MeanROM-ICS-V47-jewel-ltevo.zip
(Status 0)
Installation aborted."
I guess the installer is dependant on twrp, I'm not that familiar with cwm though
om4 said:
I guess the installer is dependant on twrp
Click to expand...
Click to collapse
Okay, well is there any way I can just completely wipe it and get it back to stock? Or anything? Sorry, I am just kind of freaking out a little right now...
Well there is the ruu, I'd try fastboot again though
When in bootloader type fastboot devices to make sure its connected, and try to flash twrp again
om4 said:
Well there is the ruu, I'd try fastboot again though
When in bootloader type fastboot devices to make sure its connected, and try to flash twrp again
Click to expand...
Click to collapse
Well it identifies it using the fastboot devices cmd. I tried to flash it again on another computer ending in the same error.
Is there any way that the recovery package you linked to could be faulty or something?
You can try downloading it again from the twrp website but if it had been bad I'm sure it would have failed the signature verification
Try fastboot getvar all and tell me what the output is
om4 said:
You can try downloading it again from the twrp website but if it had been bad I'm sure it would have failed the signature verification
Try fastboot getvar all and tell me what the output is
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.10.0001
(bootloader) version-baseband: 2.15.00.11.19
(bootloader) version-cpld: None
(bootloader) version-microp: 041f
(bootloader) version-main: 3.26.651.6
(bootloader) serialno: HT08THL01989
(bootloader) imei: 355195000000017
(bootloader) product: supersonic
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PC3610000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3655mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-3b95cc40
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.017s
can you still get into cm10? You can try installing twrp from goo manager. Install that and I'm menu install open recovery script. Otherwise relock the bootloader and run ruu, I can't think of any reason that fastboot can't flash recovery unless its locked but output states phone is soff
om4 said:
can you still get into cm10? You can try installing twrp from goo manager. Install that and I'm menu install open recovery script. Otherwise relock the bootloader and run ruu, I can't think of any reason that fastboot can't flash recovery unless its locked but output states phone is soff
Click to expand...
Click to collapse
No, every time I try to reboot into cm10 it will hang on the boot logo except one time when it booted into recovery. Could you link me a good guide to relock the bootloader and run ruu?
Is there any where else I can post this to get some additional input?
Since you're soff you can try the update zip twrp offers, it goes on root of sd card and bootloader will install. Don't forget to rename it to PJ75IMG.zip. Otherwise, download ruu and in fastboot relock bootloader "fastboot oem lock" and then run ruu
om4 said:
Since you're soff you can try the update zip twrp offers, it goes on root of sd card and bootloader will install. Don't forget to rename it to PJ75IMG.zip. Otherwise, download ruu and in fastboot relock bootloader "fastboot oem lock" and then run ruu
Click to expand...
Click to collapse
Well I can't get the phone to do anything now...its just showing a black screen (no backlight or anything). I was going to try to do the zip.
Have I messed up? Now I am getting worried
You can't get into bootloader at all? Have you tried holding power to reboot phone?

[Q] Im at my wits end.. Please help.

So last week a friend asked me to s-off his phone for him.. The phone ended up bricking (recovery gone, no os, etc...)..
Where I am at:
1. The phone is S-ON (Actually says "Monarudo PVT Ship S-ON"
2. The phone has an unlocked boot loader
3. The phone has TWRP 2.4 installed
4. HBoot 1.33
5. Radio 1.01.01.0110
6. OpenDSP v6.120.274.0114
7. eMMC-boot
8. The phone has a 4.1.1 based rom installed (Tried carbon 4.3 based, same issue and CM 4.2 based, same issue)
I have tried moonshine and face's s-off with no luck. I get about half way through with moonshine and it just sits there counting, adding periods.
I have tried :
1. Flashing a stock hboot 1.15
2. Flashing the stock splash
3. Flashing the stock RUU
Issues :
1. The phone gets NO reception Just the X with empty bars. I don't know if its the radio or something. Every once and a while I get 2 bars for a second but it goes away.
PLEASE HELP! I feel horrible that my buddy has to borrow my bionic until this is fixed.
when I tried the stock RUU from HTC it gets to a point and fails telling me incorrect image or seomthing like that.. Should have written it down, I can run it again if the error helps.
janderson2k said:
when I tried the stock RUU from HTC it gets to a point and fails telling me incorrect image or seomthing like that.. Should have written it down, I can run it again if the error helps.
Click to expand...
Click to collapse
Have you tried doing moonshine in ubuntu live cd/usb?
janderson2k said:
So last week a friend asked me to s-off his phone for him.. The phone ended up bricking (recovery gone, no os, etc...)..
Where I am at:
1. The phone is S-ON (Actually says "Monarudo PVT Ship S-ON"
2. The phone has an unlocked boot loader
3. The phone has TWRP 2.4 installed
4. HBoot 1.33
5. Radio 1.01.01.0110
6. OpenDSP v6.120.274.0114
7. eMMC-boot
8. The phone has a 4.1.1 based rom installed (Tried carbon 4.3 based, same issue and CM 4.2 based, same issue)
I have tried moonshine and face's s-off with no luck. I get about half way through with moonshine and it just sits there counting, adding periods.
I have tried :
1. Flashing a stock hboot 1.15
2. Flashing the stock splash
3. Flashing the stock RUU
Issues :
1. The phone gets NO reception Just the X with empty bars. I don't know if its the radio or something. Every once and a while I get 2 bars for a second but it goes away.
PLEASE HELP! I feel horrible that my buddy has to borrow my bionic until this is fixed.
Click to expand...
Click to collapse
Try
1 You need update to new Firmware 2.06 (for moonshine)
2 You need to Re lock Bootloader in order to RUU
3 you need to downgrade Hboot to 1.15 to RUU ( your phone show 1.33)
http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Hope this help buddy
finanandroid said:
Try
1 You need update to new Firmware 2.06 (for moonshine)
2 You need to Re lock Bootloader in order to RUU
3 you need to downgrade Hboot to 1.15 to RUU ( your phone show 1.33)
http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Hope this help buddy
Click to expand...
Click to collapse
Anyone have a recommended method to downgrade the hboot? I havnt been able to get the 1.15 to flash to the phone.. Relocking the bootloader is cake.
I appreciate your help, Sorry if I sound n00bish.
janderson2k said:
Anyone have a recommended method to downgrade the hboot? I havnt been able to get the 1.15 to flash to the phone.. Relocking the bootloader is cake.
I appreciate your help, Sorry if I sound n00bish.
Click to expand...
Click to collapse
Every one learn everyday.
Download 1.15 stock hboot. Rename to PL83IMG.zip. when u renamed it make sure is not zip.zip cause this file is already zip so u try only to rename it to PL83IMG (right click the file in your pc and check properties to make sure windows got it already as a zip extension) and place in the folder that contains ( in ur pc) your android-adb folder*
there is where any zip should go, with the exception of user preferences location. (or different folder named by the user)
Step 1) adb reboot bootloader
Step 2) fastboot oem rebootRUU
Step 3) Command to directory containing your renamed hboot zip (i.e. C:\android-adb\)
Step 4) fastboot flash zip PL83IMG.zip
*** When it says it is done in the terminal/cmdprompt execute step 5 )
[The green bar only fills up about 75% of the way]
Step 5) fastboot reboot-bootloader
Profit. Put the RUU Folder in same directory. right click and run it as administrator
soff
W00t! S-Off is done.. HBoot time....
?
finanandroid said:
Every one learn everyday.
Download 1.15 stock hboot. Rename to PL83IMG.zip. when u renamed it make sure is not zip.zip cause this file is already zip so u try only to rename it to PL83IMG (right click the file in your pc and check properties to make sure windows got it already as a zip extension) and place in the folder that contains ( in ur pc) your android-adb folder*
there is where any zip should go, with the exception of user preferences location. (or different folder named by the user)
Step 1) adb reboot bootloader
Step 2) fastboot oem rebootRUU
Step 3) Command to directory containing your renamed hboot zip (i.e. C:\android-adb\)
Step 4) fastboot flash zip PL83IMG.zip
*** When it says it is done in the terminal/cmdprompt execute step 5 )
[The green bar only fills up about 75% of the way]
Step 5) fastboot reboot-bootloader
Profit. Put the RUU Folder in same directory. right click and run it as administrator
Click to expand...
Click to collapse
So I am not sure whats up but I went through the process :
Code:
C:\adb>fastboot oem rebootRUU
< waiting for device >
...
(bootloader) Start Verify: 0
OKAY [ 0.051s]
finished. total time: 0.052s
C:\adb>fastboot flash zip PL83IMG.zip
< waiting for device >
sending 'zip' (434 KB)...
OKAY [ 0.218s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping & flushing...
(bootloader) [RUU]UZ,hboot,0
(bootloader) [RUU]UZ,hboot,50
(bootloader) [RUU]UZ,hboot,100
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
OKAY [ 2.020s]
finished. total time: 2.241s
C:\adb>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.046s]
finished. total time: 0.048s
and when I get back to bootloader it still says HBoot 1.33.. I used this hboot : http://www.mediafire.com/download.php?pj2lknq5gr0jkmf
Any ideas?
I have the same Problem,but my Phone ist S-ON and Locked with H-Boot 1.33
Radio 1.01.04.0308
OpenDSP v4.120.240.0920
No Recovery,no Root,aahh
I can´t Unlock the Bootloader
Error Code: 160.
Error Reason: MID Not Allowed.
I can´t Downgrade to 1.15
c:\ADB>fastboot flash zip PL83IMG
sending 'zip' (434 KB)...
OKAY [ 0.203s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.250s
What can i do?
Should I try RUU now or do I need hboot @ 1.15?
janderson2k said:
Should I try RUU now or do I need hboot @ 1.15?
Click to expand...
Click to collapse
yes u need Hboot, but you did before unlock, s-off with moonshine method or revone?
you can try RUU now but If you get an Image 158 error during RUU, try flashing the stock hboot again.
All sorted out.. Thanks everyone. I s offed, unlocked, and flashed new radio. All is well
Sent from my SCH-I605 using Tapatalk 2
letschky said:
I have the same Problem,but my Phone ist S-ON and Locked with H-Boot 1.33
Radio 1.01.04.0308
OpenDSP v4.120.240.0920
No Recovery,no Root,aahh
I can´t Unlock the Bootloader
Error Code: 160.
Error Reason: MID Not Allowed.
I can´t Downgrade to 1.15
c:\ADB>fastboot flash zip PL83IMG
sending 'zip' (434 KB)...
OKAY [ 0.203s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.250s
What can i do?
Click to expand...
Click to collapse
Is there no possibility?
I wanted Moonshine S-OFF,'ve updated the firmware and forgot to unlock the bootloader.
Now I have the software version 1.15.605.1, but the HBOOT version is 1.33 wlan can not be switched on and the screen flickers often know clearly wrong boot.img of the software2.06 and the modules from 1.15.
and I can not unlock the bootloader also'm not unlock with my old Unlock_code.bin.
I know now no longer continue...
Go here http://chat.andirc.net:8080/?channels= this People help
Today I had the same problem in my 10 minutes dna worked again

[Q] Re-unlock issues

I am having issues with re-unlocking my dna. I tried using the RUU to flash it back to stock but I had some problems with the RUU (error 170). I tried rerunning rumrunner (which work fine the first time) and at the end it had an error and still read a relocked with s-off in fastboot. I need to know how to complete the RUU and start from scratch, or how to re-unlock it from where I am. Thanks for the help.
RUU is failing because of hboot.
But, you're s-off. So change your CID and unlock at HTC DEV
Sent from my DLX using xda app-developers app
Phaded said:
RUU is failing because of hboot.
But, you're s-off. So change your CID and unlock at HTC DEV
Sent from my DLX using xda app-developers app
Click to expand...
Click to collapse
I didn't think you can use that method any more?
You can change cid if you're s-off
Phaded said:
RUU is failing because of hboot.
But, you're s-off. So change your CID and unlock at HTC DEV
Sent from my DLX using xda app-developers app
Click to expand...
Click to collapse
Would there be any particular number to change it to? Also would you please link me to a post with instruction on how to change the cid?
Boot into bootloader
fastboot oem writecid 22222222
Fastboot reboot-bootloader
fastboot getvar cid (should be 2s)
If so, go to htcdev and unlock
Okay so the dev unlock worked but, when it rebooted it got stuck onthe boot image and never fully booted. I left it on for a whole night. now when I try to flash/erase anything twrp is unable to mount anything. I tried wiping it with fastboot -w but is doesn't allow it. Is there any way to remount everything?
Run the RUU. You won't lose s-off. Then flash recovery, then rom.
Phaded said:
Run the RUU. You won't lose s-off. Then flash recovery, then rom.
Click to expand...
Click to collapse
How would you run the ruu when it won't boot into rom?
A ruu is the Rom.
I'm guessing u have a zip ruu
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot reboot
Sent from my HTC6435LVW using XDA Premium 4 mobile app
wrestech said:
How would you run the ruu when it won't boot into rom?
Click to expand...
Click to collapse
You boot into the bootloader and the run the RUU. The RUU is an .exe
Phaded said:
You boot into the bootloader and the run the RUU. The RUU is an .exe
Click to expand...
Click to collapse
Depends what ruu he downloaded. There is a zip ruu also.
thayl0 said:
A ruu is the Rom.
I'm guessing u have a zip ruu
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot reboot
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Will you post a link when I tried flashing the zip I found I got this
sending 'zip' (15846 KB)...
OKAY [ 1.803s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 2.548s
wrestech said:
Will you post a link when I tried flashing the zip I found I got this
sending 'zip' (15846 KB)...
OKAY [ 1.803s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 2.548s
Click to expand...
Click to collapse
Stop using the zip and use the exe
wrestech said:
Will you post a link when I tried flashing the zip I found I got this
sending 'zip' (15846 KB)...
OKAY [ 1.803s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 2.548s
Click to expand...
Click to collapse
You need update your Hboot in order to run RUU
Flashing both Firmwares link below, will put you ready to run the latest Ruu.
Recall put both files in ur adb folder as the rom.zip too
follow direction on links 1 and 2.
http://forum.xda-developers.com/showpost.php?p=48680578&postcount=44
Download this Ruu as zip file to flashing in fastboot> Rom.zip *** Flash first Firmware1 and Firmware2*** above link
http://forum.xda-developers.com/showpost.php?p=48498759&postcount=1
additional: after running firmware1 and firmware2 IF rom.zip fail
https://docs.google.com/file/d/0B32gqnbh2ZecYTlvV1dlZTVRS0E/edit?pli=1 RUU.exe move to adb folder >right click run as administrator .
Note: this RUU.exe worked like butter when the Bootloader is locked. no tested with unlocked bootloader.
It worked
Thanks for all the help,
I my phone is now working. I used the firmware links that finanandroid linked to and flash them. I then tried flashing the rom.zip through RUU but is was blocked (failed remote 24 parsing ). I then reflashed recovery (CWM) and tried wiping the cache to check and see if everything was mounting. It was. So I adb sideloaded cm 10.2 and everything is working great!
wrestech said:
Thanks for all the help,
I my phone is now working. I used the firmware links that finanandroid linked to and flash them. I then tried flashing the rom.zip through RUU but is was blocked (failed remote 24 parsing ). I then reflashed recovery (CWM) and tried wiping the cache to check and see if everything was mounting. It was. So I adb sideloaded cm 10.2 and everything is working great!
Click to expand...
Click to collapse
Just post back here if you need any more help.

[Q] Help! Stuck in HBOOT, can't run recovery

I've got a friend's HTC One M8 that's stuck in HBOOT. I can't flash a new recovery, I've tried both TWRP and CWM. Either time I get an error message "FAILED (remote: image update error)"
I'm at the end of my thread here with things I can try to fix it. I've searched almost all topics to no avail.
Here's the getvar dump:
C:\Users\Adrian>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0a41237a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
--
Device says *** UNLOCKED *** on screen, doesn't say TAMPERED (not sure what this is).
Anything fastboot commands usually result in a failed message but the device is recognized if I type "fastboot devices".
Here's a sample when trying to use Squabbi's toolkit:
target reported max download size of 1830727680 bytes
sending 'recovery' (24576 KB)...
OKAY [ 1.607s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 1.678s
I've tried using an ATT RUU, various recovery files, etc. The phone boots straight into HBOOT. Any other commands apart from fastboot on the device result in a quick flash of another screen and returns to the fastboot USB screen.
What can I do to get this device back up and running? For some reason I just can't get the recovery file to flash so I can move forward already. Am I missing something? I just got the device from a friend. He mentioned he was watching YT when all of a sudden the device went into this boot loop.
Thanks in advance!
adriankeith said:
I've got a friend's HTC One M8 that's stuck in HBOOT. I can't flash a new recovery, I've tried both TWRP and CWM. Either time I get an error message "FAILED (remote: image update error)"
Thanks in advance!
Click to expand...
Click to collapse
Hello
I'm no expert but it sounds like a radio issue
Have you tried a new RUU
Also what is your (bootloader) version-main:
Thanks
jcbjoe said:
Hello
I'm no expert but it sounds like a radio issue
Have you tried a new RUU
Also what is your (bootloader) version-main:
Thanks
Click to expand...
Click to collapse
Admittedly, I've got an iOS device myself so I'm going to have to defer to your expertise. I believe I've tried a new RUU (an ATT .exe file? It was a full blown installer, told me what version i was on, what version it would be updating to.. does this sound right?).
How can I get you the bootloader version?
adriankeith said:
Admittedly, I've got an iOS device myself so I'm going to have to defer to your expertise. I believe I've tried a new RUU (an ATT .exe file? It was a full blown installer, told me what version i was on, what version it would be updating to.. does this sound right?).
How can I get you the bootloader version?
Click to expand...
Click to collapse
C:\Users\Adrian>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: < --
jcbjoe said:
C:\Users\Adrian>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: < --
Click to expand...
Click to collapse
That was a straight copy paste from my command line. So.. I guess if there's nothing there.. ??
RUU
adriankeith said:
That was a straight copy paste from my command line. So.. I guess if there's nothing there.. ??
Click to expand...
Click to collapse
You can try this
1.58.502.1 full RUU
jcbjoe said:
You can try this
1.58.502.1 full RUU
Click to expand...
Click to collapse
Unfortunately, it seems with any of these RUU installers I get a USB connection error. I have to think it has something to do with me being unable to enable the USB Debugging mode of the phone.
Any other ideas?
adriankeith said:
Unfortunately, it seems with any of these RUU installers I get a USB connection error. I have to think it has something to do with me being unable to enable the USB Debugging mode of the phone.
Any other ideas?
Click to expand...
Click to collapse
Can you get into fastboot mode ?
IF you can get into fastboot mode we are fine .. we don't need adb
Think of fastboot as the bios and adb as the software
IF your usb is jacked you need to try another computer
EDIT: If fastboot works go to This Thread
The first download link is the firmware that you need
1. Download the firmware
2. Put your phone in fastboot mode
3. fastboot erase cache
4. fastboot oem rebootRUU
5. fastboot flash zip thefirmwareyoudownload.zip < -- if it fails you might have to do this 2x
6. fastboot reboot-bootloader
7. Tell us what you see after words
jcbjoe said:
Can you get into fastboot mode ?
IF you can get into fastboot mode we are fine .. we don't need adb
Think of fastboot as the bios and adb as the software
IF your usb is jacked you need to try another computer
Click to expand...
Click to collapse
I'm able to get into fastboot USB mode but any of the critical commands I've tried running (fastboot flash recovery image.img) all throw errors.
Like this --
sending 'recovery' (12846 KB)...
OKAY [ 1.272s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 1.341s
---
edit:
Here's the error I get when trying to erase the cache:
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 0.006s
Click to expand...
Click to collapse
adriankeith said:
I'm able to get into fastboot USB mode but any of the critical commands I've tried running (fastboot flash recovery image.img) all throw errors.
Like this --
sending 'recovery' (12846 KB)...
OKAY [ 1.272s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 1.341s
---
edit:
Here's the error I get when trying to erase the cache:
Click to expand...
Click to collapse
Did you flash the firmware file from the link i provided ?
Firmware < -- Flash this first .. don't flash anything individually .. you need to update the firmware don't unpack it
jcbjoe said:
Did you flash the firmware file from the link i provided ?
Firmware < -- Flash this first .. don't flash anything individually .. you need to update the firmware don't unpack it
Click to expand...
Click to collapse
How do I flash this file?
adriankeith said:
How do I flash this file?
Click to expand...
Click to collapse
Download it
.. once you download it you will see it says firmware.zip
Then you put it on your desktop or your Downloads folder
Then
1. fastboot erase cache
2. fastboot oem rebootRUU
3. fastboot flash zip firmware.zip < -- if it fails you might have to do this 2x (remember you flash it to where its at .. so if its in windows on your desktop it would be fastboot flash zip ~/Desktop/firmware.zip or in Downloads it would be fastboot flash zip ~/Downloads/firmware.zip
4. fastboot reboot-bootloader
5. Tell us what you see after words
jcbjoe said:
Download it
.. once you download it you will see it says firmware.zip
Then you put it on your desktop or your Downloads folder
Then
1. fastboot erase cache
2. fastboot oem rebootRUU
3. fastboot flash zip firmware.zip < -- if it fails you might have to do this 2x (remember you flash it to where its at .. so if its in windows on your desktop it would be fastboot flash zip ~/Desktop/firmware.zip or in Downloads it would be fastboot flash zip ~/Downloads/firmware.zip
4. fastboot reboot-bootloader
5. Tell us what you see after words
Click to expand...
Click to collapse
Here's the problem when I try to attempt the first command
C:\Users\Adrian>fastboot erase cache
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 0.006s
adriankeith said:
Here's the problem when I try to attempt the first command
C:\Users\Adrian>fastboot erase cache
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 0.006s
Click to expand...
Click to collapse
Can you rename the firmware.zip to 0p6bimg.zip
Once you do that put the file onto the root of your sdcard (meaning not in a folder)
Credits for the Below Method (an0ther Post# 1)
2. Simply move the "0p6bimg.zip" to the ROOT of your EXT micro sd card.
3. Boot to your boot loader. There are many ways to get to your boot loader. A lot of custom roms have it built into the restart menu. If you have usb debugging enabled its just "adb reboot bootloader" If you can't get there with one of these methods, simply make sure phone is on, hold vol up and power for 11 seconds until screen shuts off, let go and hold vol down and power until boot loader comes up. "about 4 seconds"
4. Click HBOOT in your boot loader. Your phone will automatically scan the file and ask if you want to update. Hit vol up for yes or vol down for no.
5. Phone will begin RUU restore. You can watch what it does on the screen as it will go through a list and bypasses are normal. It will reboot boot loader and you can watch progress bars in the top right corner. It goes through a TON of them so do NOT turn off phone for any reason and let it finish. The process takes about 15 minutes give or take. Once it is done, it will say complete, press power to reboot. Again do not power off phone or even touch it for that matter during this process.
jcbjoe said:
Can you rename the firmware.zip to 0p6bimg.zip
Once you do that put the file onto the root of your sdcard (meaning not in a folder)
Credits for the Below Method (an0ther Post# 1)
2. Simply move the "0p6bimg.zip" to the ROOT of your EXT micro sd card.
3. Boot to your boot loader. There are many ways to get to your boot loader. A lot of custom roms have it built into the restart menu. If you have usb debugging enabled its just "adb reboot bootloader" If you can't get there with one of these methods, simply make sure phone is on, hold vol up and power for 11 seconds until screen shuts off, let go and hold vol down and power until boot loader comes up. "about 4 seconds"
4. Click HBOOT in your boot loader. Your phone will automatically scan the file and ask if you want to update. Hit vol up for yes or vol down for no.
5. Phone will begin RUU restore. You can watch what it does on the screen as it will go through a list and bypasses are normal. It will reboot boot loader and you can watch progress bars in the top right corner. It goes through a TON of them so do NOT turn off phone for any reason and let it finish. The process takes about 15 minutes give or take. Once it is done, it will say complete, press power to reboot. Again do not power off phone or even touch it for that matter during this process.
Click to expand...
Click to collapse
Got a wrong zipped image while it was loading the zip file.
adriankeith said:
Got a wrong zipped image while it was loading the zip file.
Click to expand...
Click to collapse
Try any of the links in the Thread
You have to rename it to 0p6bimg.zip
jcbjoe said:
Try any of the links in the Thread
You have to rename it to 0p6bimg.zip
Click to expand...
Click to collapse
Yep, I renamed it to the 0P6BIMG.zip and when it began to load the file it agave me that error. I'll try that thread now.
--
Still getting the "Wrong Zipped Image!" error. I did this previously with a different firmware and it got through some of the process but bombed out after something and put me back in HBOOT. Couldn't launch recovery, couldn't launch anything. Fastboot USB shows up fine.
adriankeith said:
Yep, I renamed it to the 0P6BIMG.zip and when it began to load the file it agave me that error. I'll try that thread now.
--
Still getting the "Wrong Zipped Image!" error. I did this previously with a different firmware and it got through some of the process but bombed out after something and put me back in HBOOT. Couldn't launch recovery, couldn't launch anything. Fastboot USB shows up fine.
Click to expand...
Click to collapse
You Possibly have a bricked device
You can try chatting on freenode via irc
irc.freenode.net #sunshine-support or #htc-dev or #venomroms .. all these channels have htc devices m7 or m8
Thanks
jcbjoe said:
You Possibly have a bricked device
You can try chatting on freenode via irc
irc.freenode.net #sunshine-support or #htc-dev or #venomroms .. all these channels have htc devices m7 or m8
Thanks
Click to expand...
Click to collapse
I was coming to that conclusion quickly.
Thanks for your help though. I appreciate it.
adriankeith said:
Unfortunately, it seems with any of these RUU installers I get a USB connection error. I have to think it has something to do with me being unable to enable the USB Debugging mode of the phone.
Any other ideas?
Click to expand...
Click to collapse
Since you are s-in and bootloader unlocked, you need to relock the bootloader to run an RUU. This shouldn't give you a USB connection error, but its at least worth a try to relock.
Also, try to connect the phone to PC, go into Window Device Manager, and see if you can format the internal memory to FAT32. Some folks have had issues with internal memory corrupted, and cannot install recovery; and this fix worked for them.
---------- Post added at 10:17 AM ---------- Previous post was at 10:13 AM ----------
jcbjoe said:
You Possibly have a bricked device
Click to expand...
Click to collapse
I doubt it. So far, I've only seen on these forums one M8 where the screen still comes on, and extensive help from several folks couldn't get it back up and running. Being able to get into hboot means we can recover, 99.99% of the time.
Still a lot of things left to try.

I want to update my phone and I can not .. please help

Hello everyone ,
I bought the phone from America HTC One M7 at&t factory unlocked 64GB ..
Now I'm outside the US and I want to update the phone, and when I search for new updates, Message There are no updates to show the current time.
My phone have now software 4.3 with HTC Sense 5.0 and I want to upgrade to 4.4.2 with Sense 6.0
So what are the first steps to do that without affecting the phone ?
The phone doesn't have any root.
I tried to use this official update, But when I enter to recovery mod. A red triangle appears and I can not access to it
http://forum.xda-developers.com/showthread.php?t=2659374
Please I need help
Regards
Anybody here ?
please help
trancemtv said:
Anybody here ?
please help
Click to expand...
Click to collapse
your question belongs in the Q&A section
do you have fastboot / adb on your pc ?
Yes I have now..
And I did now my phone to unlocked bootloader
But still s-on
So what about next step you need ?
trancemtv said:
Yes I have now..
And I did now my phone to unlocked bootloader
But still s-on
So what about next step you need ?
Click to expand...
Click to collapse
post your fastboot getvar all
minus the serial no. and IMEI
now I try to setup RUU after relocke phone with s-on
RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe
but I found this message
"htc_fastboot.exe has stopped working"
what the problem ?
trancemtv said:
now I try to setup RUU after relocke phone with s-on
RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe
but I found this message
"htc_fastboot.exe has stopped working"
what the problem ?
Click to expand...
Click to collapse
You need to flash the firmware first
http://fs1.d-h.st/download/00101/a1w/4.18.502.7 Custom Firmware.zip
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
Now flash the RUU again
clsA said:
You need to flash the firmware first
http://fs1.d-h.st/download/00101/a1w/4.18.502.7 Custom Firmware.zip
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
Now flash the RUU again
Click to expand...
Click to collapse
I did like your steps but that message appear to me in fastboot screen
target reported max download size of 1526722560 bytes
sending 'zip' (29619 KB)...
OKAY [ 2.471s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 5.894s
what can I do ?
trancemtv said:
I did like your steps but that message appear to me in fastboot screen
target reported max download size of 1526722560 bytes
sending 'zip' (29619 KB)...
OKAY [ 2.471s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 5.894s
what can I do ?
Click to expand...
Click to collapse
relock the bootloader
fastboot oem lock
clsA said:
relock the bootloader
fastboot oem lock
Click to expand...
Click to collapse
Yes I did but I have same problem
trancemtv said:
Yes I did but I have same problem
Click to expand...
Click to collapse
let me find the signed firmware
this one should work
https://www.androidfilehost.com/?fid=23329332407580581
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
clsA said:
let me find the signed firmware
this one should work
https://www.androidfilehost.com/?fid=23329332407580581
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
Click to expand...
Click to collapse
sorry I cant understand ..
do you need details about firmware in phone now ?
if yes this is my details
4.3
5.0 HTC sense
relocked
s-on
hboot-1.55.0000
os-3.17.502.3
trancemtv said:
sorry I cant understand ..
do you need details about firmware in phone now ?
if yes this is my details
4.3
5.0 HTC sense
relocked
s-on
hboot-1.55.0000
os-3.17.502.3
Click to expand...
Click to collapse
your fine ..flash the above firmware and then the RUU you have
I did it now and work with me .. but when restart phone stop on HTC logo and shutdown
now hboot 1.56.0000
os-4.18.502.7
but phone not work when reboot
please help I don't know what happened
trancemtv said:
I did it now and work with me .. but when restart phone stop on HTC logo and shutdown
now hboot 1.56.0000
os-4.18.502.7
but phone not work when reboot
please help I don't know what happened
Click to expand...
Click to collapse
did you flash the RUU also ?
clsA said:
did you flash the RUU also ?
Click to expand...
Click to collapse
thank you thank you my friend
I'm already setup RUU now .. and phone back to work with me 4.4.2 with sense 5.5
Thank you very much for your patience with me
Is it possible my phone accept OTA files or not .. to setup sense 6.0 if i need
If not, what are the conditions to do this first
trancemtv said:
thank you thank you my friend
I'm already setup RUU now .. and phone back to work with me 4.4.2 with sense 5.5
Thank you very much for your patience with me
Is it possible my phone accept OTA files or not .. to setup sense 6.0 if i need
If not, what are the conditions to do this first
Click to expand...
Click to collapse
no you won't get the OTA updates
next flash the 5.x firmware and Guru reset Rom
5.12.502.2.firmware.zip
https://www.androidfilehost.com/?fid=23501681358543602
Then unlock bootloader flash TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Then you can flash this rom
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
During install choose no to stock recovery and radio
and choose Yes to Root.
Now you have Sense 6 and the latest AT&T OS
I downloaded your file ATT_Sense6_OTAPkg.zip .. Is this what I needed ?
now I have openrecovery-twrp-2.8.4.0-m7.img
Is it necessary to download openrecovery-twrp-2.6.3.3-m7.img ?
Is there RUU HTC Sense 6.0 ATT
trancemtv said:
I downloaded your file ATT_Sense6_OTAPkg.zip .. Is this what I needed ?
now I have openrecovery-twrp-2.8.4.0-m7.img
Is it necessary to download openrecovery-twrp-2.6.3.3-m7.img ?
Is there RUU HTC Sense 6.0 ATT
Click to expand...
Click to collapse
No sorry the OTApkg will not work for you.
get the file's I posted above, their is no RUU for sense 6 but flashing the firmware + the Guru reset is the same as a RUU
TWRP 2.8.4.0 is fine
ok good.. I will flash Guru_Reset_M7_5.12.502.2_clsA.zip
like steps to flash firmware.zip from fast boot, really?

Categories

Resources