Had a friend gave me their 10 g9 tablet I installed sde and cm11 tablet working fine. there was stil a lot of her apps on there I formatted the drive and was then stuck on the boot screen. tried repair option in sde nothing figured I accidently erased cm11 and it wouldn't fit on partition so I downloaded stock rom from archos now screen wont light up green led still flashes when plugged in bot will not boot even to archos screen or sde any ideas on next step
Related
Firstly, it should be noted that I'm a noob.
I just bought this Nook Tablet 8GB today. I tried following Adam's post on downgrading a 16GB NT to 2.1.0. Attempting this on my 8GB seemed to be working as it was seemably installing the "update" with a yellow loading bar. It never booted, and its been a black screen since.
I have an SD card, with Adam's UbuntuTotalReflash image burned on it, to boot from, but I cannot tell if the device is on or off. Is there a way to boot it using a software through USB? Someone please help. Thanks.
I am having the same problem, installed the acclaim 1.4.0 downgrade on a 8 GB 250A nook tablet and now it doesnt power on. The computer recognizes it as an OMAP when its plugged in but it does not boot. please help
do not use Adams total wipe wait a bit that meghd00t is cooking something for the bricked 8gb nook tablets, and i be helping with support.
For now try to boot something else from sdcard like cm7 or the new recovery made by meghd00t that is proven to work fine for the 8gb NT.
If you press power button for 20 minutes or so it may power off. You can tell because of the color screen under the light if is black black with no signs of light in a corner then is off but if you see some blue with some light to the top right corner then is not completely off and if that happens it will for sure overheat your tablet.
Hmmm maybe you can use the method to put it in a fridge for 2-3 hours, check it up.
The goal here is to make it boot up even if it's from sdcard only for now.
~ Veronica
Try USB BOOT?
No matter what I've done to mine in the past, it would always boot by inserting the USB cable (preferably plugged into charger not PC) with a Bootable SD card installed.
My 2 cents
Hi all,
please need your help with my nook tablet, got bricked after trying to intall CWM, after that tried the ubuntu fix, I guess it didn't work until the end, so now got the "n" logo at the boot, and the message of battery low appears everytime, but it stayed in the plug whole day. don't know what happned, can't boot from SD.
jk13 said:
Hi all,
please need your help with my nook tablet, got bricked after trying to intall CWM, after that tried the ubuntu fix, I guess it didn't work until the end, so now got the "n" logo at the boot, and the message of battery low appears everytime, but it stayed in the plug whole day. don't know what happned, can't boot from SD.
Click to expand...
Click to collapse
It should be able to boot from the SD card because the nook automatically boots from there first. Try installing the latest version of of CWM onto the SD card and do a factory reset from there.
Here's the link for CWM Recovery. h ttp://goo.im/devs/succulent/acclaim/recovery/CWM_6.0.2.7_Nook_Tablet.7z
Wasn't sure where to post this, so figured here was the safest option - just change it if it needs it!
Hey guys. I've recently bought a CnM Touchpad 7 inch (a10 chip)
It was running fine till i installed an app i believe it didnt like. now when I boot it all it shows is the android logo constantly on loop and wont boot into the OS
So i held down vol + and power on button for 10 seconds to go into 3e recovery
I've tried wiping the cache / reset option but it still reboot and is stuck on the android logo on constant loop
i've tried Recovery (not clockword mod) and there is a boot from SD card, problem is it wont read any micro SD cards I put on it
so because of this i cant put a rom on it to flash it.
I figured as a last resort i'd try connecting it to my win7 pc and hoping it'd pick it up as a USB drive to drag and drop the rom on that way (even without the micro sd card inserted) since it has onboard memory of around 6gb i believe. but win7 dosent recognise it and cant find drivers for it
Any suggestions? I'm really stuck here. otherwise i've just got a bricked tablet.
Kind regards if anyone can shed light on this!
yodjone1 said:
Wasn't sure where to post this, so figured here was the safest option - just change it if it needs it!
Hey guys. I've recently bought a CnM Touchpad 7 inch (a10 chip)
It was running fine till i installed an app i believe it didnt like. now when I boot it all it shows is the android logo constantly on loop and wont boot into the OS
So i held down vol + and power on button for 10 seconds to go into 3e recovery
I've tried wiping the cache / reset option but it still reboot and is stuck on the android logo on constant loop
i've tried Recovery (not clockword mod) and there is a boot from SD card, problem is it wont read any micro SD cards I put on it
so because of this i cant put a rom on it to flash it.
I figured as a last resort i'd try connecting it to my win7 pc and hoping it'd pick it up as a USB drive to drag and drop the rom on that way (even without the micro sd card inserted) since it has onboard memory of around 6gb i believe. but win7 dosent recognise it and cant find drivers for it
Any suggestions? I'm really stuck here. otherwise i've just got a bricked tablet.
Kind regards if anyone can shed light on this!
Click to expand...
Click to collapse
Is it A10 processor or Rockchip??
My son's archos 80 g9 used to work pretty well. but it failed to launch now. After pressing the power button, the boot logo will appear and the screen remains there forever. If I boot into SDE, I see it says "Archos A80S Starting" and stuck there, no more the normal SDE menu that I used to see when I rooted the tablet.
I managed to open the case but found no loose cable or anything suspicious. This problem seems to be similar to a harddrive-less computer with BIOS, where you see BIOS working but booting will go no further into any OS. I work in computer software, but not an expert on tablet. Any idea to fix this?
Archos, though not a highend tablet, works smoothly so far. Really want to save this little guy. Thanks!
My nephew recently got an HP Slate 7 16gb (4600), it runs on android 4.1, he updated something that appeared on a notification. I'm not sure what it was, but the tablet was brad new and didn't have any apps, so my best guess is that it was a system update.
The problem is that is now stuck at bootloop (Hp logo at startup).
What I've tried:
Turn it off and back on, nothing
Charge it completely (the charging animation does appears), nothing
Boot it on recovery and reboot, noting
Factory reset from recovery and wipes, nothin
What do you think I should do? I haven't found the stock image (that was my next step)
Anyone can help?