[Q] Phone only booting to recovery - Micromax A116

Hi,
I flashed CWM 6.0.4.8 from here .
All worked fine but I flashed MIUI and now my phone is only booting to recovery. I also tried to flash other roms, same result...
So, I tried to use SP Flash tools to flash the stock rom but when I connect my phone to the computer, a sound comes and it shows in the device manager as MT65xx Preloader and within 2 seconds it removes from device manager with another sound.. i did try this many times but same result. And also tried on another computer.
All what I can get is to see Google ADB Interface in the device manager when I plug my phone and turn it on to CWM.
Anyone has an idea? Please help me.
Thanks

benj91 said:
Hi,
I flashed CWM 6.0.4.8 from here .
All worked fine but I flashed MIUI and now my phone is only booting to recovery. I also tried to flash other roms, same result...
So, I tried to use SP Flash tools to flash the stock rom but when I connect my phone to the computer, a sound comes and it shows in the device manager as MT65xx Preloader and within 2 seconds it removes from device manager with another sound.. i did try this many times but same result. And also tried on another computer.
All what I can get is to see Google ADB Interface in the device manager when I plug my phone and turn it on to CWM.
Anyone has an idea? Please help me.
Thanks
Click to expand...
Click to collapse
have u installed the flashing drivers??
mayb ur computer isn't recognizing ur device and thats y it is disappearing from device manager

edwardpage said:
have u installed the flashing drivers??
mayb ur computer isn't recognizing ur device and thats y it is disappearing from device manager
Click to expand...
Click to collapse
Is there specific drivers for flashing? And if so, i don't have the time to install them because the device is disappearing after 2 secs...

benj91 said:
Is there specific drivers for flashing? And if so, i don't have the time to install them because the device is disappearing after 2 secs...
Click to expand...
Click to collapse
refer this thread
forum.xda-developers.com/micromax-a116/help/phone-bricked-t2810634

Thanks to all.
Problem resolved.
Have to use SP_Flash_Tool_v3.1304.0.119 instead of SP_Flash_Tool_v3.1248.0...

Related

[Q] gt S5830i in Bootloop

Hi guys,
First of all sorry for bad english.
I turned my dives of because it was stuck when deinstalling an app.
Now, when i boot it, the boot animation comes, then the samsung logo,then the boot animation and so on.
My device is rooted. I had a backup with cwm but when i restore it it says:
Checking MD5 sums...
Restoring system...
Restoring data...
Error mounting /data!
Skipping format...
Can't mount /data!
But this backup worked before...
I tried to flash a new firmware with odin but odin won't recognize my device in download/odin mode.
What can i do? I searched for 5 hours now...
Thx for answers
Odin must recognize your device if you are in download mode.Just wait a moment and he will.If not try to change the usb port.
When you see the com in yellow tick repartition select you pda and flash
Even i had the same problem there r 3 things u can change
1:change your connecting cable
2:reinstall samsung drivers and then try again
3:change ports
Even after u flash stock firmware it does bootloop then do a factory reset from stock recovery
This should work
dylan.james1947 said:
Even i had the same problem there r 3 things u can change
1:change your connecting cable
2:reinstall samsung drivers and then try again
3:change ports
Even after u flash stock firmware it does bootloop then do a factory reset from stock recovery
This should work
Click to expand...
Click to collapse
Thanks, I will try it
Hmm...
I installed samsung kies, changed usb ports and reinstalled the drivers but odin
still won't recognize my phone...
flashonium said:
Thanks, I will try it
Hmm...
I installed samsung kies, changed usb ports and reinstalled the drivers but odin
still won't recognize my phone...
Click to expand...
Click to collapse
Odin recognize devices in download mode. Ur devive was in? If not.
Remove battery, sd, plug in pc.
Hold power+volumeUp+volumeDown for 6sec.
Inserts batery.
Run odin as adm.
Sent from my GT-S5830i using xda app-developers app
did you try to do a factory to do a factory reset from stock recovery
How it worked
Thank for your help guys, i figured that maybe doing this in a virtual machine was not a good idea...
But thats the recipe:
1. Try to AWAYS use the drivers that automatically install when you plug in your phone, because the samsung drivers I downloaded didn't work
for me.
2. NEVER install new drivers on top of the old ones; always deinstall the old ones first.
3. Try again and again and again! Don't stop after the first five times trying.
hai,i have a serious problem and i need your help.....
the problem is I installed galaxy y (gts5360)'s stock rom on galaxy ace (gts5830i).now i couldnt enter into recovery mode nor download mode it stands in small screen showing galaxy y's logo
krishna prasad said:
hai,i have a serious problem and i need your help.....
the problem is I installed galaxy y (gts5360)'s stock rom on galaxy ace (gts5830i).now i couldnt enter into recovery mode nor download mode it stands in small screen showing galaxy y's logo
Click to expand...
Click to collapse
you guy deserve an oscar for waking up a dead thread (the thread is from november last year...) and we have THIS SECTION FOR QUESTIONS LIKE YOURS ... use it... and stop waking up such corpse..
sorry bro...
I'm new to this kind of stuff.thanks for the link brother.

Lenovo a680 help! Soft bricked/ boot loop problem

Hi dude, Just wanna ask how to fix my lenovo a680 boot loop problem. When I enter to the recovery mode there is no "Advance" Option in my stock recovery. Also every time i tried to connect my phone to a laptop/ desktops it disconnects instantly. I tried different usb cables, but the problem still persist. I really don't know what I'm gonna do. I also tried ADB but it wont connect to my phone it says "Error: Devices not found" My only chance on repairing my phone is using a 2gb sd card. Which I also tried. I tried to flash stock rom on it but it says "Installation aborted" There is also a resting robot with a red triangle and an exclamation point on it. Which says " No Command" So if you can help me, that would mean a lot to me. Thanks in advance!
The last way u can do is "Factory Reset" using stock recovery.., hit thanks if I help you..
rpav_27 said:
Hi dude, Just wanna ask how to fix my lenovo a680 boot loop problem. When I enter to the recovery mode there is no "Advance" Option in my stock recovery. Also every time i tried to connect my phone to a laptop/ desktops it disconnects instantly. I tried different usb cables, but the problem still persist. I really don't know what I'm gonna do. I also tried ADB but it wont connect to my phone it says "Error: Devices not found" My only chance on repairing my phone is using a 2gb sd card. Which I also tried. I tried to flash stock rom on it but it says "Installation aborted" There is also a resting robot with a red triangle and an exclamation point on it. Which says " No Command" So if you can help me, that would mean a lot to me. Thanks in advance!
Click to expand...
Click to collapse
bootloop? were you trying to root.flash anything? Never mind. flash a custom recovery cwm, twrp of your choice. then,
full wipe from there. and flash lenovo a680 stock firmware from here. this will delete everything.not sure of internal sd card.there are also flash instuctions too. Hope this fix it. After you flash i think you will get your stock recovery back.
HIT THANKS IF I HELPED. DON'T FORGET TO HIT THANKS.
LINK HERE:
androidxda.com/download-lenovo-stock-rom-models
Edit: you weren't able to flash from phone because stock recovery can't flash roms.. it can't wipe system partition.
Hi thank you for your suggestion but i tried everything but i can't flash any roms because every time i connect my phone through a laptop or a desktop it disconnects automatically within 3-5 seconds. I also tried flashing rom through an sd card but i get a "Installation aborted" I also tried flashing a recovery but my problem is the disconnection between my phone and my laptop, i tried different cables and sockets but it's still the same. When I tried to use the usb cable to another phone it doesn't disconnect. I also tried using adb but when it's starting to install the zip file it disconnects also. I tried everything.
Hi MicroMonster Thank you for your suggestion but I tried that a thousand times, I've tried clearing the partition and the cache and everything but it doesn't do the job.
rpav_27 said:
Hi MicroMonster Thank you for your suggestion but I tried that a thousand times, I've tried clearing the partition and the cache and everything but it doesn't do the job.
Click to expand...
Click to collapse
Hello there..How you'r phone,did u fix or found any solution yet?If not,i'm ready to help.
Need help
Mafi91 said:
Hello there..How you'r phone,did u fix or found any solution yet?If not,i'm ready to help.
Click to expand...
Click to collapse
Hey bro, do u have a link for stock rom for this phone? Im going to load the rom via sideload. Thanks!
hristcroixqwerty said:
Hey bro, do u have a link for stock rom for this phone? Im going to load the rom via sideload. Thanks!
Click to expand...
Click to collapse
http://androidxda.com/download-lenovo-stock-rom-models
here you can find and download any stock rom for lenovo smartphone
i tried to download lenovoA680 stockrom in that link and everytime i reach 50% the download stop progressing do you have other link where i can download the stockrom?
please help..soft brick problem
hi, I got the same problem.
My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
---------- Post added at 06:18 AM ---------- Previous post was at 06:08 AM ----------
Mafi91 said:
Hello there..How you'r phone,did u fix or found any solution yet?If not,i'm ready to help.
Click to expand...
Click to collapse
hi Mafi92..I got the same problem..pls help My Lenovo A680_row phone was stuck on its logo upon start up (boot loop, I guess).. I tried the recovery mode but nothings happen. So I decided to use SPFT to flash new rom. I think the driver installed successfully,my phone is being detected showing MTK USB port on device manager of pc but eventually only for a few seconds,then it will disconnect,hence I wont be able to flash new rom using SPFT.. how will i solved this?I tried a lot of drivers from the net and used different usb connector but still goes with the same problem.. hope someone could help me with this..thanks!
Hi dude, Just wanna ask how to fix my lenovo a680 boot loop problem
Hi dude, Just wanna ask how to fix my lenovo a680 deadboot problem how to revive pls hep me
LENOVO A680 Bootloop solution + Update THIS SHOULD HELP
try SEARCHING ON GOOGLE :
lenovoa680transcrypto.blogspot
hi
I'm having a similar problem that when connecting with the USB the device shows very briefly in device manager, less than 1 sec and then it's gone.

Stuck in CWM

Good night
Well, this morning I tried to make a backup of my rom using the rom manager. It failed and I got stuck in the CWM. I've already tried flashing other roms (transwin and bionic monkey) and wipe cache, data, etc. Right now, I'm trying to flash CWM using odin, but it can't recognize my device. I've already trying unnistalling/reinstalling KIES and Samsung drivers, but it always shows that error code: 10 (even in another computer).
So... anyone have any ideas? I think I should try to make odin recognize my device, but I don't know what to do anymore...
delete kies from system and try to connect device in Download mode wait for Odin to install drivers and recognized by it or try different port or cable
windowsvistas said:
delete kies from system and try to connect device in Download mode wait for Odin to install drivers and recognized by it or try different port or cable
Click to expand...
Click to collapse
Thanks for your attention. I did it all again, but I think the problem was that I was using the recovery to enter in download mode. When I tried to enter without it I managed to get out of recovery, but now I can't make KIES recognize my device to get back to stock and the Bionic Monkey rom is bugged ("Android.process.acore has stopped" every 3 seconds). I saw the topic with some stocks, but I can't find one for my country (Brazil) and IDK if I can just flash any rom... I'm going to try the TransK rom, I wanted to test it anyway.
Thanks again ^^

[Q] Google Calendar not syncing (VIBEUI 2)

Hi,
I installed Lenovo P780 VibeUI 2.0 version: VIBEUI_V2.0_1512_DEV_P780 and gapps-kk-20150404-minimal-edition-signed.zip.
Then I installed Google Calendar from Play Store. Unfortunately it doesn't sync. If I go to settings/accounts/google there is no "google calendar data" option to choose.
marekjarosz said:
Hi,
I installed Lenovo P780 VibeUI 2.0 version: VIBEUI_V2.0_1512_DEV_P780 and gapps-kk-20150404-minimal-edition-signed.zip.
Then I installed Google Calendar from Play Store. Unfortunately it doesn't sync. If I go to settings/accounts/google there is no "google calendar data" option to choose.
Click to expand...
Click to collapse
Try to install full gapps pack.
Sent from my Lenovo P780
stympy said:
Try to install full gapps pack.
Click to expand...
Click to collapse
Any recommended source?
marekjarosz said:
Any recommended source?
Click to expand...
Click to collapse
Try the pack from cyanogen.
Sent from my SMT TAB 704DC
stympy said:
Try the pack from cyanogen.
Click to expand...
Click to collapse
Unfortunately I used [GApps][4.4.2][AROMA]_Aroma_Installer_GApps-v1.5.2 and didn't wipe data before/after. After rebooting the phone got "Lenovo launcher stopped, must be closed". After swithching the phone off and on end up with an infinite bootloop.
I rebooted the phone into recovery mode and wiped data, cache and dalvik and tried to reinstall VIBEUI_V2.0_1512_DEV_P780. After the first launch there is only a chinese text (I guess it might be some error, after clicking the button the same error apears again and again).
I tried to flash a custom revovery (as I end up with a Lenovo-Recovery with nothing to do) with a Flash Tool V5.13.52.200 as described in other thread but after clicking "download" and connecting the phone nothing happens (phone shows red light and a battery charge screen). The phone is recognized by the PC (Win 7) as even after turning the phone on again it is possible to upload files to the SD card using windows explorer.
marekjarosz said:
Unfortunately I used [GApps][4.4.2][AROMA]_Aroma_Installer_GApps-v1.5.2 and didn't wipe data before/after. After rebooting the phone got "Lenovo launcher stopped, must be closed". After swithching the phone off and on end up with an infinite bootloop.
I rebooted the phone into recovery mode and wiped data, cache and dalvik and tried to reinstall VIBEUI_V2.0_1512_DEV_P780. After the first launch there is only a chinese text (I guess it might be some error, after clicking the button the same error apears again and again).
I tried to flash a custom revovery (as I end up with a Lenovo-Recovery with nothing to do) with a Flash Tool V5.13.52.200 as described in other thread but after clicking "download" and connecting the phone nothing happens (phone shows red light and a battery charge screen). The phone is recognized by the PC (Win 7) as even after turning the phone on again it is possible to upload files to the SD card using windows explorer.
Click to expand...
Click to collapse
Hi. Try to reflash using SP Flash Tool v5 from my post Rooting Tutorial for KK.
I use ONLY those tools. Tested and modified for P780.
Sent from my Lenovo P780
stympy said:
Hi. Try to reflash using SP Flash Tool v5 from my post Rooting Tutorial for KK.
I use ONLY those tools. Tested and modified for P780.
Click to expand...
Click to collapse
I used exactly those tools, but with a results described below:
I tried to flash a custom revovery (as I end up with a Lenovo-Recovery with nothing to do) with a Flash Tool V5.13.52.200 as described in other thread but after clicking "download" and connecting the phone nothing happens (phone shows red light and a battery charge screen).
Click to expand...
Click to collapse
marekjarosz said:
I used exactly those tools, but with a results described below:
Click to expand...
Click to collapse
seems to me that your phone is no longer detected by your computer !
se this:
1. go to device manager
2. with device manager window open plug your phone
3. in device manager in Ports tab something like MTK 65XX... will appear for 1 or 2 secconds
Tell me if this is going on !
stympy said:
seems to me that your phone is no longer detected by your computer !
se this:
1. go to device manager
2. with device manager window open plug your phone
3. in device manager in Ports tab something like MTK 65XX... will appear for 1 or 2 secconds
Tell me if this is going on !
Click to expand...
Click to collapse
My device is detected by my computer as I am able to copy files to SD card using windows explorer. I plug the phone and I see "Lenovo P780" in My Computer, then I open it and get access to internal memory and SD card.
BUT - I do not see it in the Device Manager at all... Maybe I will try to do it on the other Windows computer?
marekjarosz said:
My device is detected by my computer as I am able to copy files to SD card using windows explorer. I plug the phone and I see "Lenovo P780" in My Computer, then I open it and get access to internal memory and SD card.
BUT - I do not see it in the Device Manager at all... Maybe I will try to do it on the other Windows computer?
Click to expand...
Click to collapse
Try what i told you with the phone powered off!
The computer must have windows XP or windows 7!
Good Luck.
stympy said:
seems to me that your phone is no longer detected by your computer !
se this:
1. go to device manager
2. with device manager window open plug your phone
3. in device manager in Ports tab something like MTK 65XX... will appear for 1 or 2 secconds
Tell me if this is going on !
Click to expand...
Click to collapse
After connecting switched-off phone to the USB port MT65xx Preloader appears in the Device Manger for 1-2 seconds.
marekjarosz said:
After connecting switched-off phone to the USB port MT65xx Preloader appears in the Device Manger for 1-2 seconds.
Click to expand...
Click to collapse
Hi. You are lucky. Your phone is detected by your computer !
All you have to do is to flash a custom recovery TWRP CN Version.
After this you could download your firmware again and put it on sd card ! reboot to recovery wipe and reflash your firmware !
stympy said:
Hi. You are lucky. Your phone is detected by your computer !
All you have to do is to flash a custom recovery TWRP CN Version.
After this you could download your firmware again and put it on sd card ! reboot to recovery wipe and reflash your firmware !
Click to expand...
Click to collapse
Thanks for your reply, but as I wrote before I don't really know how to achieve it as it is not possible to do it using Flash Tool
marekjarosz said:
Thanks for your reply, but as I wrote before I don't really know how to achieve it as it is not possible to do it using Flash Tool
Click to expand...
Click to collapse
If you want i can help you. All you need is a connection by team viewer.
Sent from my Lenovo P780
I used [TUT] Instructions MTK6577 USB VCOM Driver Installation to install a proper driver and was able to flash a custom ROM to make it work as suppose to and was able to do the rest without any problems.
Thank you

troubleshooting to connect the phone to the PC

Hi all,
by cons for several weeks I've a concern with my redmi Note 2 and I can't find the answer to my problem on the forum or even the Internet.
Since the last update 7.2.2 (global) I have the Recovery MIUI who crushed the TWRP. I changed to test 6.3.17. The update to the .24 went wrong and I don't know why. Since the phone is bootloop. But the problem is that my phone is not recognized by any PC. I tried several PCs, several cables, several drivers, with or without the Fastboot, unable to connect. Therefore impossible to load a new version. I don't think it's material problem because the phone recharge well with a cable to the socket.
Is there another handling or debug decision to restart the phone? I'm in France for information.
thank you in advance if you can point me to a solution !
Hope someone can help me.
Manu
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
DarthJabba9 said:
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Click to expand...
Click to collapse
manu33xtro said:
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
Click to expand...
Click to collapse
Ok - but have you tried the Mediatek SP Flash Tool?
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
DarthJabba9 said:
Ok - but have you tried the Mediatek SP Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
Click to expand...
Click to collapse
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Yes you're right : every 10s the phone vibrate...
DarthJabba9 said:
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Click to expand...
Click to collapse
manu33xtro said:
Yes you're right : every 10s the phone vibrate...
Click to expand...
Click to collapse
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
DarthJabba9 said:
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
Click to expand...
Click to collapse
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
DarthJabba9 said:
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Click to expand...
Click to collapse
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
manu33xtro said:
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
Click to expand...
Click to collapse
manu33xtro said:
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
Click to expand...
Click to collapse
Perhaps you might want to describe what exactly happens when do you what exactly?
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
DarthJabba9 said:
Perhaps you might want to describe what exactly happens when do you what exactly?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
Click to expand...
Click to collapse
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
I will try again this night to be sure with all steps one by one. And I will also try with ACER tablet I and runs Android 5.1. Maybe it will be recognized.
Otherwise I also tried to pass a Linux PC as a last resort.
Thanks again for your help.
DarthJabba9 said:
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Click to expand...
Click to collapse
manu33xtro said:
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
Click to expand...
Click to collapse
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Hum good question. In fact I don't know. I'll ask the MIUI forum.
I got home late from work so I don't do tests tonight, I'd see it all tomorrow including the connection with my tablet ...
Thanks
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
Click to expand...
Click to collapse
I don't think it is a crack on the USB plug. It seems to me to be a low-level driver problem - ie, the drivers on the phone that are active when the phone is not (fully) booted up. I don't have the right terminology for these drivers, but they are possibly part of the bootloader. If that is the problem, then I don't know how you would solve this problem.

Categories

Resources