Good night
Well, this morning I tried to make a backup of my rom using the rom manager. It failed and I got stuck in the CWM. I've already tried flashing other roms (transwin and bionic monkey) and wipe cache, data, etc. Right now, I'm trying to flash CWM using odin, but it can't recognize my device. I've already trying unnistalling/reinstalling KIES and Samsung drivers, but it always shows that error code: 10 (even in another computer).
So... anyone have any ideas? I think I should try to make odin recognize my device, but I don't know what to do anymore...
delete kies from system and try to connect device in Download mode wait for Odin to install drivers and recognized by it or try different port or cable
windowsvistas said:
delete kies from system and try to connect device in Download mode wait for Odin to install drivers and recognized by it or try different port or cable
Click to expand...
Click to collapse
Thanks for your attention. I did it all again, but I think the problem was that I was using the recovery to enter in download mode. When I tried to enter without it I managed to get out of recovery, but now I can't make KIES recognize my device to get back to stock and the Bionic Monkey rom is bugged ("Android.process.acore has stopped" every 3 seconds). I saw the topic with some stocks, but I can't find one for my country (Brazil) and IDK if I can just flash any rom... I'm going to try the TransK rom, I wanted to test it anyway.
Thanks again ^^
Related
I've tried everything on this site to root and get cwm to install custom roms. I've done this with my inspire and infuse but the sgs2 is currently winning the battle.
I have the drivers installed and I know how to boot into download mode but for some reason odin will not work for me. I can't get the yellow bar to come up for me to install the pda file. I like the phone but not being able to flash roms is gonna suck.
If anyone could help that would be great. I've tried all the methods on here and no success. Thanks in advance.
Put your phone into download mode and connect to you computer, then go to to device management either through settings or by right clicking on my computer then properties.
There look through the USB devices on your computer, you should find this listed somewhere there
Code:
Samsung Mobile USB CDC Composit Device
If the driver is set up correctly.
If you can't find the above then uninstall any thing that is any kind of a Samsung mobile device, unplug your phone and uninstall and reinstall Samsung kies.
If you do find the above, unplug your phone, make sure the version of Odin you have is 1.82 or higher.
Then do the following in the exact order
1. Reboot your computer
2. Start Odin
3. Put your phone into download mode and connect to your computer - and hopefully within 10 to 15 seconds Odin should recognize your phone
Sent from my SAMSUNG-SGH-I777 using XDA App
ODIN Flash
cpbeats said:
I've tried everything on this site to root and get cwm to install custom roms. I've done this with my inspire and infuse but the sgs2 is currently winning the battle.
I have the drivers installed and I know how to boot into download mode but for some reason odin will not work for me. I can't get the yellow bar to come up for me to install the pda file. I like the phone but not being able to flash roms is gonna suck.
If anyone could help that would be great. I've tried all the methods on here and no success. Thanks in advance.
Click to expand...
Click to collapse
This should fix the problem:
Get the Samsung Unified USB driver here: http://api.viglink.com/api/click?for...13196871580881
Be sure to uninstall kies if it's installed and uninstall any other samsung usb driver.
Then reboot windows before installing the new unified samsung drivers.
After installation of the new usb drivers reboot windows before connecting the usb cable into the phone.
Plugging in the original samsung usb cable into a different usb port in the
back of the computer is also a good thing to try as Dungeon47 was saying.
Good Luck!
Make sure you are using a USB directly connected to your motherboard. Make sure you are using an official Samsung or Blackberry micro USB cable. If that doesn't help, try another port.
Ok thanks i'm still in the process of trying and doing what y'all suggested. I will let y'all know if it works.
Well I got superuser now but still unsuccessful in flashing rom.
Says installation aborted. Ill try later but thanks for helping out.
Did you try starting Odin first, and plugging your phone in afterwards? That hung me up for a little bit. (I'm assuming you reinstalled Kies as suggested).
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Yeah I got root but when I try to flash a rom I'm unsuccessful. Trial and error. Ill get it.
Hey guys I have recently tried flashing the biohazard ics kernel thru clockwork but now that I've done that the phone won't boot but mow when i try to restore my previous rom it says there's an md5 mismatch and when i try to install a rom from the internal card I get a can't mount emmc message. Also since i installed the standard ice rom odin only read my phone when it was turned on. Have I bricked my phone???
If you can still get into download mode, you have not bricked your phone. Just flash an original firmware, root it and try again with the restoration.
I have the firmware but if odin won't detect my phone do i need to reinstall the drivers or get a new cable.
kn1v3z said:
I have the firmware but if odin won't detect my phone do i need to reinstall the drivers or get a new cable.
Click to expand...
Click to collapse
what do you mean if?? pls explain your situation more clearer
try reinstalling drivers. and before opening odin, kill all kies related tasks in task manager. then open odin. then connect phone while in download mode
whenever i was running the previous rom, odin would only detect my phone when it was booted normally but not when i would go into download mode and since i can't pull roms off my sd card because i get a can't mount /emms/ i've never gotten that error message before.
Don't connect your phone to odin, since you have no proper kernel installed Odin won't detect any drivers.
Go to recovery mode and reflash stock kernel stored on your phone(assuming you have stored a kernel).
If you haven't then use Heimdall Suite to flash recovery mode again, use link below for reference:
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II:_Full_Update_Guide
i reinstalled the samsung drivers and heimdall doesn't detect my phone either :/
What is the "biohazard ics kernel" ?
Try a different cable, different usb port and different computer.
it's an ice cream sandwich kernel created by biohazard and ever since i cant't boot up and clockwork can't detect my removable sd which is where all my backup files and other roms are. I've already tried about 3 different cables and all ports the only other thing is to find a desktop and see if that works...I have a feeling i might have to buy another phone since my phone so far can't be detected in download mode anymore.
So what exactly happens when you put your phone into download mode (power off phone, then hold volume down and home button while booting it) then plug it into the computer?
Does the computer detect it, does it try to install drivers?
the computer detects it but odin won't detect it unless you've installed kies on your computer
kn1v3z said:
the computer detects it but odin won't detect it unless you've installed kies on your computer
Click to expand...
Click to collapse
Uninstall kies, download the samsung phone drivers from my 4shared (the 4icon in my sig), install them, put phone into download mode, plug into computer.
still no luck...
Hi guys,
First of all sorry for bad english.
I turned my dives of because it was stuck when deinstalling an app.
Now, when i boot it, the boot animation comes, then the samsung logo,then the boot animation and so on.
My device is rooted. I had a backup with cwm but when i restore it it says:
Checking MD5 sums...
Restoring system...
Restoring data...
Error mounting /data!
Skipping format...
Can't mount /data!
But this backup worked before...
I tried to flash a new firmware with odin but odin won't recognize my device in download/odin mode.
What can i do? I searched for 5 hours now...
Thx for answers
Odin must recognize your device if you are in download mode.Just wait a moment and he will.If not try to change the usb port.
When you see the com in yellow tick repartition select you pda and flash
Even i had the same problem there r 3 things u can change
1:change your connecting cable
2:reinstall samsung drivers and then try again
3:change ports
Even after u flash stock firmware it does bootloop then do a factory reset from stock recovery
This should work
dylan.james1947 said:
Even i had the same problem there r 3 things u can change
1:change your connecting cable
2:reinstall samsung drivers and then try again
3:change ports
Even after u flash stock firmware it does bootloop then do a factory reset from stock recovery
This should work
Click to expand...
Click to collapse
Thanks, I will try it
Hmm...
I installed samsung kies, changed usb ports and reinstalled the drivers but odin
still won't recognize my phone...
flashonium said:
Thanks, I will try it
Hmm...
I installed samsung kies, changed usb ports and reinstalled the drivers but odin
still won't recognize my phone...
Click to expand...
Click to collapse
Odin recognize devices in download mode. Ur devive was in? If not.
Remove battery, sd, plug in pc.
Hold power+volumeUp+volumeDown for 6sec.
Inserts batery.
Run odin as adm.
Sent from my GT-S5830i using xda app-developers app
did you try to do a factory to do a factory reset from stock recovery
How it worked
Thank for your help guys, i figured that maybe doing this in a virtual machine was not a good idea...
But thats the recipe:
1. Try to AWAYS use the drivers that automatically install when you plug in your phone, because the samsung drivers I downloaded didn't work
for me.
2. NEVER install new drivers on top of the old ones; always deinstall the old ones first.
3. Try again and again and again! Don't stop after the first five times trying.
hai,i have a serious problem and i need your help.....
the problem is I installed galaxy y (gts5360)'s stock rom on galaxy ace (gts5830i).now i couldnt enter into recovery mode nor download mode it stands in small screen showing galaxy y's logo
krishna prasad said:
hai,i have a serious problem and i need your help.....
the problem is I installed galaxy y (gts5360)'s stock rom on galaxy ace (gts5830i).now i couldnt enter into recovery mode nor download mode it stands in small screen showing galaxy y's logo
Click to expand...
Click to collapse
you guy deserve an oscar for waking up a dead thread (the thread is from november last year...) and we have THIS SECTION FOR QUESTIONS LIKE YOURS ... use it... and stop waking up such corpse..
sorry bro...
I'm new to this kind of stuff.thanks for the link brother.
Hi all,
Please anyone help me!! I flashed 5.0.1. UB Team Roam few days back. My phone's all data lost I don't know how but it lost and even my phone. I want to downgrade but it even doesn't let me to do it. I can enter recovery mode as well download mode. But my phone is not recognized by windows (Its unknown device in device manager). Whenever I plug usb cable the popup comes that usb device has malfunctioned and windows does not recognize it. I have tried all the possible mathod to get it recognize but I am failing everytime.
I have stock firmware downloaded 4.3 and odin ready but I could not flash it due to the problem. Some one on the XDA told me that the file system of Lollipop is different and that's why I am not able to do so, But I am unable to figure out the problem. Please help and suggest what to do...
rawalmaulin said:
Hi all,
Please anyone help me!! I flashed 5.0.1. UB Team Roam few days back. My phone's all data lost I don't know how but it lost and even my phone. I want to downgrade but it even doesn't let me to do it. I can enter recovery mode as well download mode. But my phone is not recognized by windows (Its unknown device in device manager). Whenever I plug usb cable the popup comes that usb device has malfunctioned and windows does not recognize it. I have tried all the possible mathod to get it recognize but I am failing everytime.
I have stock firmware downloaded 4.3 and odin ready but I could not flash it due to the problem. Some one on the XDA told me that the file system of Lollipop is different and that's why I am not able to do so, But I am unable to figure out the problem. Please help and suggest what to do...
Click to expand...
Click to collapse
Flashing a new rom will not remove old user data unless you formatted it completely.
Odin will work only in download mode and you need to right click > Run as Admin.
Enter download mode on your phone and connect your device to PC then flash the stock 4.3
RazorMC said:
Flashing a new rom will not remove old user data unless you formatted it completely.
Odin will work only in download mode and you need to right click > Run as Admin.
Enter download mode on your phone and connect your device to PC then flash the stock 4.3
Click to expand...
Click to collapse
Thanks for reply but I am doing same thing but my phone is not recognized by windows. The popup comes each & everytime that USB device has malfunctioned and windows does not recognize it. So, I could not connect the phone in MTP or PTP mode when the phone is running or even when I put it in download mode and connect to pc. Same error is comming. I have tried the same thing on several PC/Laptop, Tried changing USB Cables god, don't know what to do....:crying:
@rawalmaulin: uninstall KIES & drivers and install the drivers again.
rawalmaulin said:
Hi all,
Please anyone help me!! I flashed 5.0.1. UB Team Roam few days back. My phone's all data lost I don't know how but it lost and even my phone. I want to downgrade but it even doesn't let me to do it. I can enter recovery mode as well download mode. But my phone is not recognized by windows (Its unknown device in device manager). Whenever I plug usb cable the popup comes that usb device has malfunctioned and windows does not recognize it. I have tried all the possible mathod to get it recognize but I am failing everytime.
I have stock firmware downloaded 4.3 and odin ready but I could not flash it due to the problem. Some one on the XDA told me that the file system of Lollipop is different and that's why I am not able to do so, But I am unable to figure out the problem. Please help and suggest what to do...
Click to expand...
Click to collapse
Use mobile Odin until you get it fixed here >> https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro << this will allow you to flash stock without using a pc.
tallman43 said:
Use mobile Odin until you get it fixed here >> https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro << this will allow you to flash stock without using a pc.
Click to expand...
Click to collapse
Thanks for your valueable advice. I will try it today and will be back with result.
I done it but still the phone is not at all recognized
HI there guys. Hope you are doing fine. My device is giving an weird error when I tired to do either wipe/factory reset or flash new ROM in TWRP Recovery. Also I can't install Stock Recovery with ODIN which always results in a FAIL message. The error I get in TWRP is attached below for your reference.
Thank you so much in advance.
You use download mode to flash stock firmware etc, not recovery mode. If the phone doesn't respond to odin while in download mode then try another USB cable, preferably the original that came with the phone.
shivadow said:
You use download mode to flash stock firmware etc, not recovery mode. If the phone doesn't respond to odin while in download mode then try another USB cable, preferably the original that came with the phone.
Click to expand...
Click to collapse
Hi there. I'm sorry that you misunderstood my statement. I'm aware about the usage of download mode with ODIN. It's just that I can't get it to work anyhow. Gives me FAIL message as the in the error message attached below. They TWRP recovery currently installed which was working fine when I last used this device months ago can't even mount the system partitions to do any kind of operations as in the pic of post#1. Can you help me with that?
Try a different usb cable and usb port.