Related
I'm new to this forum and i'm from germany. So i hope this post is in the right category. And sorry, if my englisch is not so good. I only had englisch at school 10 jears ago.
You can see in the link below my phone from china.
http://www.cect-shop.com/de/android-note-n7100-silbergrau.html#.UZYNJkqndze
I try to root it as described here: http://forum.xda-developers.com/showthread.php?t=2247537
The script rooted the phone successfully. But after a while the phone begins to start new and stucks on a bootloop. I searched a new fimware. Finally i found some on needrom.com. But i found not the 100% same and so i tried to Flash with te SP Flash Tool. (Please don't beat me!) With most Firmwares, the phone doesn't start or the screen doesn't display something. With a Firmware from Star N7100 the phone starts and i see everything on the display. But the home-, menu- and volume down buttons won't work.
Can someone help me to get the right firmware?
edit:
I've tried a long time. Finally i installed the firmware from the star s7189. The phone seems to work, but the screen is pixelated (i hope it is the right word, i used google to translate). I think, the system is the same, but the screen had a other resolution. Maybe thats the problem. The Star is at 854x480. My phone is at 960x540.
OK, i tried many times, many firmwares. I found 2 firmwares, they are nearly perfect. In one are the right camera drivers, in the other are the right display drivers. I have to make this in one uboot. Please, help me.
The second problem are the Buttons. In any firmware are problems with the hardware keys (Volume up, Volume Down, Menu, Home, Back). Here i need help too.
Hi,
Why didn't you just buy a N700 or an I9300? Or an N7102/N7100?
Would just like to know.
I wished, i can buy a original N7100. But i don't had the money for it. So i buyed a clon from china for less money. In this state, the phone can only used as paperweight, damn! And the money is now shattered like the phone, damn²!
OK, i understand. XDA doesn't support or develope for clone devices.
I don't want just the firmware for my device on a silver tray, i look for help to understand the android-system better.
I don't stop to search, before it won't work. So i found the MPai N7100 with the Quad-Core-Processor MTK6589. This phne looks exactly the same like mine. Now i will try this firmware, but i didn't found them.
you need to find this firmware e2001_v89_hydy_20130322
You say it! This firmware should be right. But i can't find them.
The newest firmware is e2001_v89_hydy_20130407. I can also use this. This are Android 4.2. The firmware you say is Android 4.1.
btw
I tried to flash the S7189 firmware and the boot.imb and uboot.bin files from the N7189 you explain in this thread here. http://forum.xda-developers.com/showthread.php?p=41221266 The Display was upside down and the keys won't work right.
I flashed the boot.img and the uboot.bin from the Star N7100. Now the display is right oriented, but the cam won't work and the problem with the keys continues.
@unrealbg
Is it possible to extract drivers from a uboot.bin? I asked, because i had 2 uboot files. In one are the right camera drivers, in the other are the right display drivers. I have to make this in one uboot.
An the second question is: Where can i edit the keys (vol up, vol down, back, home, menu)? I had problems in every firmware with the buttons. They don't register a push.
OK, now the ****ty phone is fully bricked.
I found a firmware for Star N7100 on needrom. I flashed it with SPM-Flashtool. I think, the preloader is flashed too. There was no way to disable the flash of these. The flash seems to be successfully. The bars went to 100% and it says DL OK. I tried to start it, but nothing works.
Ok i like to flash another firmware and load it into SPM. I clicked on Start and connect the phone. The windows sound for recognized device appears. Now only the red bar went to 100%. Then SPM says "No Bootrom USB port was found! COM16 is not a Bootrom (preloader) USB port."
I tried the same with the SP Flashtool. I loaded the firmware into SP, clicked on Start and connect the phone. The windows sound for recognized device appears. Now only the red bar went to 100% and SP says BROM_ERROR : S_FT_ENABLE_DRAM_FAIL (4032) Here i can deselect/select everything, so i only select the preloader. Same problem.
SP version: V3.1308.0.sn125
SPM version: V3.1034.00-A2013.02.26
try with this https://hotfile.com/dl/223954404/dfbdb2d/SP_Flash_Tool_v3.1312.0.139.7z.html <-- new version
btw i thik your phone is "M Pai N7100 Note 2"
you need to find boot.img from your original rom!
not try files from other firmware because it will screw up your phone!!!
Thanks,
I tried with your tool, but the error are almost the same. The red bar went to 100%, then 2-3 seconds and the Flashtool said:
SP FLASH TOOL ERROR: (8200)
My phone is certainly a MT6589! Flashtool recognizes the phone on COM16 as a MTK USB Port. The screenshots about the Flashtool and the error i attached.
edit
I don't have the 100% right firmware, but i flashed already before the firmware in the attached image (preloader too) and the phone at least starts.
saschljk said:
Thanks,
I tried with your tool, but the error are almost the same. The red bar went to 100%, then 2-3 seconds and the Flashtool said:
SP FLASH TOOL ERROR: (8200)
My phone is certainly a MT6589! Flashtool recognizes the phone on COM16 as a MTK USB Port. The screenshots about the Flashtool and the error i attached.
Click to expand...
Click to collapse
I uploaded a new version try it/ but you need to flash only firmware for your phone not other firmwares (link has been changed in the above post)
You are a King! Thank you very much!
With the new Flashtool it works with Firmware upgrade and the "wrong" firmwarefile. My dealer send me from china just now the right firmware. I'ts in the download. If it's finished, i will try and give the reply here.
edit
OK, the firmwarefile from my dealer is also not 100% the right. Its the right for the phone on his page i buy, but not the right for the phone he send to me. So i will go on... Thanks to your help, i can now go on.
I think, i only must only have the right uboot.
saschljk said:
You are a King! Thank you very much!
With the new Flashtool it works with Firmware upgrade and the "wrong" firmwarefile. My dealer send me from china just now the right firmware. I'ts in the download. If it's finished, i will try and give the reply here.
edit
OK, the firmwarefile from my dealer is also not 100% the right. Its the right for the phone on his page i buy, but not the right for the phone he send to me. So i will go on... Thanks to your help, i can now go on.
I think, i only must only have the right uboot.
Click to expand...
Click to collapse
you must select right drivers for your phone from uboot using SP_MDT
Oh dear,
in SP_MDT the boxes for selecting main sensor, sub sensor and lcd are empty.
I had only one uboot file from other device (Star N7189), where i can select anything. In these are the right main sensor and sub sensor drivers, but the wrong display drivers. The Display are upside down, but the touch sensors for display are in the right direction. Its magic!
I had another uboot file, in this are the right display driver, but the wrong main sensor and sub sensor drivers.
The uboot files, i will attach to this post.
I found some information in the logfile of MTK-Droid-Tools. The first time, i connect the phone, i recived this data:
Model : N7100
Build number : e2001_v89_hydy_20130322
Build date UTC : 20130322-060711
Android v : 4.2.1
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #2 SMP Sat Mar 23 15:41:41 CST 2013
saschljk said:
You are a King! Thank you very much!
My dealer send me from china just now the right firmware. I'ts in the download. If it's finished, i will try and give the reply here.
Click to expand...
Click to collapse
Can you send me this firmware?
Sorry for the late response. http://www.needrom.com/mobile/fly-n7100/ Here you can download the firmware.
Now i found the device i had and know what firmwarefile i need.
Here a Link of the device and specs: http://www.chinapadmall.com/mpai-n7100#.UaT-NUqndzc
And here a Video: http://www.youtube.com/watch?v=-FriO5G8pqk
I still search for this firmware. It#s very hard, to find the firmware. I cant belive, that i am the only one, who had this device. Nowhere a firmware to download.
But on my way, i am now one step further. I think, uboot-file are the key. I found 3 firmwares, wich come very close to my device.
First firmware (Star N7102): Right displaydrivers, but wrong cameradrivers and the buttons and sofkeys won't work right.
Second firmware (Star N7189): Right cameradrivers, but wrong displaydrivers and the buttons and sofkeys still won't work right.
Third firmware (MIZ Z6):Yes, the buttons and sofkeys work right. I hear it and think i see it in the pixelated display. I think you guessed it. Wrong
displaydrivers and wrong cameradrivers.
In my opinion, all drivers are in te uboot-file.
I need help!!!
I have Galaxy Note II (Chinese Copy)
1 microsim,
MT6577 QuadCore 1.6GHz
2GB Ram
8Mpx, 1,9Mpx front
Android: 4.1.1
Build number: JRO03C.N7100ZSALIA
Baseband version: N7100XXALIE
Kernel: 3.0.31-178067 SMP PREEMPT Wed May 29 14:21:02 CST 2013
My model have 12GB internal memory but 99% internal is full... WTF?! Plz help me
Galaxy Note 2 clone I7100 Firmware
Hello! Members,
I need Samsung Galaxy Note 2(China clone) Model GT- I7100.I installed Boot.img and recovery images files to this device.The device can't load boot.img I installed and stop android logo.So, I need this Firmware or boot.img file for this phone.Someone help me, please.
My Phone Information
Samsung Galaxy Note II (clone)
Model : I7100
Android Version : 4.0.3
Baseband Version : MTK6517
Kernel Version : 2.6.35.7
Software Version : W22.20_P20
Hardware Version 2.1.0
Hi i have a clone note 2 with single microsim.it was in boot loop condition but after i flashed it with a stock rom from needrom.com now its not even running on boot loop nor show charging i even tried to connect with pc bt just red light on notification light nothing els.pls help
need ROM
Kyawzin Tun said:
Hello! Members,
I need Samsung Galaxy Note 2(China clone) Model GT- I7100.I installed Boot.img and recovery images files to this device.The device can't load boot.img I installed and stop android logo.So, I need this Firmware or boot.img file for this phone.Someone help me, please.
My Phone Information
Samsung Galaxy Note II (clone)
Model : I7100
Android Version : 4.0.3
Baseband Version : MTK6517
Kernel Version : 2.6.35.7
Software Version : W22.20_P20
Hardware Version 2.1.0
Click to expand...
Click to collapse
hello i have this and is looping you got the ROM to flsh? pls
Just got a Chinese Clone Note II
Running Jelly Bean 4.1.1
back of phone under battery shows Model S7188
Phone about Specs:
Model e1901_v77_jbla668_fwvga
4.1.1
basband
MAUI.11amd.w12.22.sp.v15.p2,
2012/12/20 14:10
Kernel 3.4.0
[email protected]
#1 SMP PREEMPT Mon April 15 11:49:48
CST2013
Build number
e1901_v77_jbla668_fwvga_20130415
When I attempt to install on win 7 or xp it tries to install as ADP driver or Android google driver
Just looking for a way to root it.
Thanks
No one wants to assist on this?
Just got a Chinese Clone Note II
Running Jelly Bean 4.1.1
back of phone under battery shows Model S7188
Phone about Specs:
Model e1901_v77_jbla668_fwvga
4.1.1
basband
MAUI.11amd.w12.22.sp.v15.p2,
2012/12/20 14:10
Kernel 3.4.0
[email protected]
#1 SMP PREEMPT Mon April 15 11:49:48
CST2013
Build number
e1901_v77_jbla668_fwvga_20130415
When I attempt to install on win 7 or xp it tries to install as ADP driver or Android google driver
Just looking for a way to root it.
Thanks
magemasher89 said:
Just got a Chinese Clone Note II
Running Jelly Bean 4.1.1
back of phone under battery shows Model S7188
Phone about Specs:
Model e1901_v77_jbla668_fwvga
4.1.1
basband
MAUI.11amd.w12.22.sp.v15.p2,
2012/12/20 14:10
Kernel 3.4.0
[email protected]
#1 SMP PREEMPT Mon April 15 11:49:48
CST2013
Build number
e1901_v77_jbla668_fwvga_20130415
When I attempt to install on win 7 or xp it tries to install as ADP driver or Android google driver
Just looking for a way to root it.
Thanks
Click to expand...
Click to collapse
needrom .com/ mobile/star-s7188/
here you go
(delete the spaces)
http://needrom.com/mobile/star-s7188/ edited link for everyone so no need to remove spaces.
Start S7180 easy root
magemasher89 said:
Just got a Chinese Clone Note II
Running Jelly Bean 4.1.1
back of phone under battery shows Model S7188
Phone about Specs:
Model e1901_v77_jbla668_fwvga
4.1.1
basband
MAUI.11amd.w12.22.sp.v15.p2,
2012/12/20 14:10
Kernel 3.4.0
[email protected]
#1 SMP PREEMPT Mon April 15 11:49:48
CST2013
Build number
e1901_v77_jbla668_fwvga_20130415
When I attempt to install on win 7 or xp it tries to install as ADP driver or Android google driver
Just looking for a way to root it.
Thanks
Click to expand...
Click to collapse
I can offer one more way to root the above device. I have the exact same device, but mine show S7180 on the back (Star S7180, I bought it under the name iPro S7180), but everything else is the same including the build e1901_v77_jbla668_fwvga_20130415.
To root it:
- Search google for Kingo Root or go to kingoapp. com - download Kingo Root app and install it (works under WinXP and Win7, don't know about Win8, but it should)
- Enable USB debugging in the Developer options on the device
- Plug in the Start S7180/S7188 phone with a standard micro usb cable, while the device is ON with the battery in, select nothing in the USB pop up menu, just leave it
- Run KingoRoot wait for it to recognize the device and click ROOT
- The app will install USB drivers for the device and root it - easy as this, it takes about 2 minutes
- If Kingo Root does not find USB drivers for the device, install them manually - search for "MTK6577 usb drivers" in Google, download the driver, install them on top without removing anything and repeat the procedure.
- Kingo has the option to remove the ROOT as well, which is nice if you need the warranty :angel:
This method worked for me without any issues and it took about 5 minutes. Have fun with a newly rooted NoteII clone. Now you can install custom recovery (for exmp. CWM recovery) and install custom ROMS, that is if you find a decent one - just search XDA. I still keep the rooted stock ROM, it's enough for now, until a comatible Cyanogen KitKat 4.4 comes out.
One more thing - I can offer one forum with a lot of useful stuff for our device - search google for star s7180 forum china ru
It's in russian but Google translate should be enough - there is a lot of information and fixes (remove second network icon, when there is not second sim card; get the GPS working and lock in a position in under a minute; increase the speaker volume; increase the internal space for installing apps by reformatting it, etc)
Cheers.
How to ROOT this phone ?
Model Number
" e1901_v77_jbla668_fwvga "
Android Version
" 4.1.1 "
Kernel Version
3.4.0
Build Number
" e1901_v77_jbla668_fwvga_20130116
" s7100 "
i search the Model number and it is Chinese Clone Note 2
i try " KingoRoot " but it does not work pls HELP me !!!
Gidday
Zapryanov said:
I can offer one more way to root the above device. I have the exact same device, but mine show S7180 on the back (Star S7180, I bought it under the name iPro S7180), but everything else is the same including the build e1901_v77_jbla668_fwvga_20130415.
To root it:
- Search google for Kingo Root or go to kingoapp. com - download Kingo Root app and install it (works under WinXP and Win7, don't know about Win8, but it should)
- Enable USB debugging in the Developer options on the device
- Plug in the Start S7180/S7188 phone with a standard micro usb cable, while the device is ON with the battery in, select nothing in the USB pop up menu, just leave it
- Run KingoRoot wait for it to recognize the device and click ROOT
- The app will install USB drivers for the device and root it - easy as this, it takes about 2 minutes
- If Kingo Root does not find USB drivers for the device, install them manually - search for "MTK6577 usb drivers" in Google, download the driver, install them on top without removing anything and repeat the procedure.
- Kingo has the option to remove the ROOT as well, which is nice if you need the warranty :angel:
This method worked for me without any issues and it took about 5 minutes. Have fun with a newly rooted NoteII clone. Now you can install custom recovery (for exmp. CWM recovery) and install custom ROMS, that is if you find a decent one - just search XDA. I still keep the rooted stock ROM, it's enough for now, until a comatible Cyanogen KitKat 4.4 comes out.
One more thing - I can offer one forum with a lot of useful stuff for our device - search google for star s7180 forum china ru
It's in russian but Google translate should be enough - there is a lot of information and fixes (remove second network icon, when there is not second sim card; get the GPS working and lock in a position in under a minute; increase the speaker volume; increase the internal space for installing apps by reformatting it, etc)
Cheers.
Click to expand...
Click to collapse
Hi, I have the
Model Number
" e1901_v77_jbla668_fwvga "
Android Version
" 4.1.1 "
Kernel Version
3.4.0
Build Number
" e1901_v77_jbla668_fwvga_20130116
" s7100 "
and have rooted it with kingo..
I can not find a cwm for this model or a custom rom that is higher than the stock. Do you have a link for both?
I really hope you can help
Hi all,
Let me first thank you for the wonderful website that you've created here, it already really helped me out.
Now, I want to root my fake Galaxy S4. I know the pain of people who ask questions without trying to look around for a solution themself. Yet, after a few full days, starting without any knowledge of smartphones, working my way trough all the terminology and trying to root my device... the only thing I know left to do is asking for your help. I sincerely hope this is 1) the right place 2) I'm allowed to ask this here and 3) there is not already a simliar topic... If I still failed then feel free to redirect me, move me, etc.
I bought the following device:
Hardware : MT6575 (SAMSUNG is aFake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build date UTC : 20130606-103654
Android v : 4.2.2
Baseband v: MAUI.11AMD.W11.50.SP.V37, 2013/05/06 11:21
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Thu Jun 6 18:33:27 CST 2013
This is what I did:
Drivers:
- I've downloaded and succesfully installed pda drivers.
- I've manually installed MT6575_USB_VCOM_drivers by connecting my phone while holding the volume button. These drivers appear, but disappear again in the Device Manager.
Tried Roots:
- This one of course. But the 'Restore button' does not pop up.
- SRSRoot - does not work
- New graphical method for MTK6589,MTK6577,MTK6575 - does not work
- Manual way directed via MTK Droid Root en Tools:
I failed here at step 7. Mtk drooid Root does not make the CWM automaticly.
Furthermore:
- Tried removing all user data in Recovery Mode, but when I press the power button to select the option it simply does not react.
- I can not enter 'download mode' as far as I know.
- I know there are more methods in Gizbeat 101, but I can't acces them right now... as I'm not a full member there and somehow got instabanned.
- I have the idea they could help me at the Russian fora.. I found this thread with help of google translate... but I don't speak Russian and can't figure out what to do.
Can anyone help me out? This phone has hardly any internal storage. I can't remove most of the applications and a lot of appliacations first install on it's internal memory. If I can't root it, then I can't really use any new applications, since there is no room.
One more question: Am I right if I say I could flash the phone without rooting it? Only that there are at the moment no mtk6575 roms to flash on it?
You're my last resort, else I'll just accept the phone is unrootable and probably buy a new one.... Any help would be much appreciated!
i did factory reset - and network signal is gone for the same above fone
do u have any solution
i tried all possible solutions
some say it is 2.3 not 4.2.2
do u have rom (cumsum)
when i tried to restore data - it said cumsum match error
kingvasudev said:
i did factory reset - and network signal is gone for the same above fone
do u have any solution
i tried all possible solutions
some say it is 2.3 not 4.2.2
do u have rom (cumsum)
when i tried to restore data - it said cumsum match error
Click to expand...
Click to collapse
Hey man,
I think it's not possible to make a full back-up without rooting the phone is it? Else I'll be glad to help you out.
I can make a scatterfile with the mtkdroidrootprogram.. but the 'backup' button in mtkdroidroot is grey.
If you tell me how to make a backup I'll gladly help.
So I probably shouldn't just try and flash my phone? Good chance I brick it...
Best regards,
R.
ps. I'm dutch but happened to be in Hyderebad not so long ago
I got root on a s4-clone with the same specs as the first poster.
I used Cydia Impactor.
I can not attach links, so just google it.
megabirger said:
I got root on a s4-clone with the same specs as the first poster.
I used Cydia Impactor.
I can not attach links, so just google it.
Click to expand...
Click to collapse
Thanks for your reply! But...
Cydia Impactor does not recognize my phone. (errormsg: "/data/local/tmp/impactor-5" or "no such device")
Which drivers did u use?
S3 Mini Clone Korea
any of you know how i can root may s3 mini clone korea mtk 6575? any info would be appreciated! thanks a bunch!
chubywoobee said:
any of you know how i can root may s3 mini clone korea mtk 6575? any info would be appreciated! thanks a bunch!
Click to expand...
Click to collapse
i also have the same unit and i tried every rooting method but no success. What i did is i just install superuser app and it works. hope this help. cheers.
HydraNL said:
Hi all,
Let me first thank you for the wonderful website that you've created here, it already really helped me out.
Now, I want to root my fake Galaxy S4. I know the pain of people who ask questions without trying to look around for a solution themself. Yet, after a few full days, starting without any knowledge of smartphones, working my way trough all the terminology and trying to root my device... the only thing I know left to do is asking for your help. I sincerely hope this is 1) the right place 2) I'm allowed to ask this here and 3) there is not already a simliar topic... If I still failed then feel free to redirect me, move me, etc.
I bought the following device:
Hardware : MT6575 (SAMSUNG is aFake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build date UTC : 20130606-103654
Android v : 4.2.2
Baseband v: MAUI.11AMD.W11.50.SP.V37, 2013/05/06 11:21
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Thu Jun 6 18:33:27 CST 2013
This is what I did:
Drivers:
- I've downloaded and succesfully installed pda drivers.
- I've manually installed MT6575_USB_VCOM_drivers by connecting my phone while holding the volume button. These drivers appear, but disappear again in the Device Manager.
Tried Roots:
- This one of course. But the 'Restore button' does not pop up.
- SRSRoot - does not work
- New graphical method for MTK6589,MTK6577,MTK6575 - does not work
- Manual way directed via MTK Droid Root en Tools:
I failed here at step 7. Mtk drooid Root does not make the CWM automaticly.
Furthermore:
- Tried removing all user data in Recovery Mode, but when I press the power button to select the option it simply does not react.
- I can not enter 'download mode' as far as I know.
- I know there are more methods in Gizbeat 101, but I can't acces them right now... as I'm not a full member there and somehow got instabanned.
- I have the idea they could help me at the Russian fora.. I found this thread with help of google translate... but I don't speak Russian and can't figure out what to do.
Can anyone help me out? This phone has hardly any internal storage. I can't remove most of the applications and a lot of appliacations first install on it's internal memory. If I can't root it, then I can't really use any new applications, since there is no room.
One more question: Am I right if I say I could flash the phone without rooting it? Only that there are at the moment no mtk6575 roms to flash on it?
You're my last resort, else I'll just accept the phone is unrootable and probably buy a new one.... Any help would be much appreciated!
Click to expand...
Click to collapse
please send me your backup, i will make cwm 6.0.3.0 recovery for you.
make your backup with mtk droid tools 2.3.8 . connect phone with usb, click on root . it will root temporary . click on the bakup . creat backup and upload on the 4share or any other place and send me link.
i will make cwm recovery for you if you like TWRP recovery i will make also for you
try
try kingoapp i rooted my phone with the same chipset of yours.. just give it a try..
reminders:
+allow usb debugging
+ur pc needs internet connection
+remove sd card
+do factory reset
just google about kingoapp since i cannot post a link here because i am new member...
Porklo said:
try kingoapp i rooted my phone with the same chipset of yours.. just give it a try..
reminders:
+allow usb debugging
+ur pc needs internet connection
+remove sd card
+do factory reset
just google about kingoapp since i cannot post a link here because i am new member...
Click to expand...
Click to collapse
Thanks for the tip.
Won't the factory reset brick my phone? Since it won't install the hacked ROM?
I tried it without the factory reset but it says "This is not a real Samsung." Will that really change if I factory reset :S?
Try Farmaroot Application buddy. It will work.
forever king said:
Try Farmaroot Application buddy. It will work.
Click to expand...
Click to collapse
Your device seems not vulnerable to exploit included in Framaroot
HydraNL said:
Your device seems not vulnerable to exploit included in Framaroot
Click to expand...
Click to collapse
Oh, then did you tried " TPSparkyRoot" method? and sorry, i thought you're using mt6577.
Try the software eroot. Everything is in Chinese but I just clicked and clicked and finally got my phone (clone s4 mini Korean) rooted.
I now have my phone bricked when I tried to install some fonts. I got into the 3e recovery but cannot execute the command.
ahmadw said:
Try the software eroot. Everything is in Chinese but I just clicked and clicked and finally got my phone (clone s4 mini Korean) rooted.
I now have my phone bricked when I tried to install some fonts. I got into the 3e recovery but cannot execute the command.
Click to expand...
Click to collapse
Just fyi, if you still wanna know:
In 3e, you can execute the commands by hitting the lower left touch key, think it's the menu button took me like forever to figure that out
Anyways, I probably got the same mobile, it is a mtk6575. But I am not sure which custom rom I could install safely. Which one worx for sure?!
Eroot
ahmadw said:
Try the software eroot. Everything is in Chinese but I just clicked and clicked and finally got my phone (clone s4 mini Korean) rooted.
I now have my phone bricked when I tried to install some fonts. I got into the 3e recovery but cannot execute the command.
Click to expand...
Click to collapse
Man! After several hours and efforts on trying root my chinese s4 clone, I saw your post about eroot!
It just worked like a charm!
Thank you!
Hi guys,
I have a S4 mini clone with the follow config:
--About the phone info
Device Name: GT-I9190
Model number: GT-I9190
Android version: 4.2.2
Baseband version: I9190XXUAMF5
Kernel Version: 3.4.0-849021 [email protected]#1 Thu Jun 13 16:52:08 KST 2013
Build Version: JDQ39.I9190XXUAMF5
SELinux state: Permissive
--Antutu tester info
Phone model: GT-I9190
Phone brands: Samsung
CPU model: ARMv7 processor rev 10(v7l)
CPU frequency: 13.53
CPU manufacturers: SAMSUNG SERRANO
Internal RAM: 1349(MB)
Internal ROM: 107(MB)
Android OS version: 4.2.2
Version: JDQ39.I9190XXUAMF5
Kernel Version: 3.4.0-849021 [email protected]))#1 SMP PREEMPT Thu Jun 13 16:52:08 KST 2013
Screen Resolution: 540x960
--Factory mode info (hold volume up + power button when phone turned off)
BB Chip: MT6575
MS Board: GT-I9190
Modem Ver: MAUI.11AMD.W11.50.SP.V37 2013/08/20 12:45
Build time: 2013 09 27 14:25:07 CST
UBoot ver.: 2010.06
Kernel ver: 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Sep 27 14:21:49 CST 2013
Android ver: 2.3.6
SW ver: MDK_V2.1_K18_en_tp6306_v2.3
Custom Build Verno. : 1380262921
It's a clone from China/Korea/Japan (I don't know) and I would like to root and update the android version but I've tried a lot of different tutorials but no success in anyone.
I tried to put my phone on Download mode (Hold volume down + home button + power button) but it only show a screen with the android robot and a triangle with white borders and an exclamation inside. It is the recovery mode (Android recovery mode <e> with some options appears if I press home button)
Could somebody help me on this?
I tried:
* Odin -- Does not recognize my phone because it is not in download mode
* Mtk droid tools:
--->>> Connect to device <<<---
--- Nand Page/Spare = 2048/64
--- Start ZergRush ...
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a GingerBread ! 0x00000118
[*] Scooting ...
[*] Sending 149 zerglings ...
[*] Sending 189 zerglings ...
[-] Hellions with BLUE flames !
--- Through CWM it is possible to get root on this phone!
* PdaNet -- Don't do nothing, loose of time testing it!!
* SP Flash Tools -- When I choose the scatter file (generated by MTK Droid tools) the list of downloads does not fill the 'Location' and it does not let me download anything.
Nothing works. I really would like to root because I want to update android and uninstall a bunch of chinese/korean apps that shows semi naked women in the middle of screen from nothing. Depending on the situation it can cause an embarrassment for me.
Please help me!!!!!!
s4 I9500 replica
can some one help me get the rom for a mt6575 I9500 dual core 1Ghz, 512rami managed to flash a few roms, but i think those are not for my device, cause most of them are S3, or note, but it matches cause of the NAND flash file on them, can some one help me with this?, device dont turn on or charge, but ican make it work on pc to flash by holding down volume- key and then pluging cable to pc, when first red bar pass i but the battery and flash is complete(this is using SPFlash Tools.
Hi all,
Please I am making another thread on the topic of lost root after an update of 4.3 on my S3 GT I9300, Plus no pc/laptop is recognizing my phone , When ever I connect USB windows says unknown device, windows error code 10 and 43. I would run my phone without root but after update the phone is not register network, IMEI is there in setting/about phone/status , But even for bringing network back I have to root the phone and I spended 3 days finding stuff if I am able to root the phone without pc suport.
I am really frustreted & can't handle anymore so, please developers if anyone of you can see and get me a flashable zip file package which I can flash over system recovery to get root. Details of the firmware are as follow....
Bootloader: I9300XWUGML4
Build: JSS15J.I9300XWUGML4
Android Version: 4.3
Baseband: I9300DDUGNB1
Kernel Ver: 3.0.31-2363855 [email protected] #1 Fri Dec 27 20:00:26 KST 2013
Please Developers Help or my phone has become a toy for kids to play games.
I have tried all the possible methods, I mean by framaroot, iroot, rootmaster, and somany other apps which I can download through wifi and run on the phone. I am able to go to recovery/download mode but pc is not recongnizing my phone I think the update has mas up something on the phone and operating system. So, for all the aspects I require to have root whether I wish to flash custom rom, custom recovery, stock rom through mobile odin or anything. I have read and tried to apply anything that has come across to me in last few days but no luck. :crying: I hope this thread would bring my luck back and my phone will be as earlier. Please help and reply earliest.
Thanks in advance.
Perform a factory reset. Reinstall the device drivers in PC and then try connecting.
Pls anybody apparently i have some adwares and trojans into my system apps like smsmanager, rstech_knile etc all system apps cant be disabled or removed, only flashing rom is option, but i cant find any rom for this model pls is any other simmilar model that i can use maybe there is some tablet that have same rom model or something like that. Thanks in advance for help.
Hi everyone,
I also have this device and I'm willing to report my case because I'm also in search of the proper ROM for this device which I recently messed up (hardbricked) by flashing wrong ROM.
I was recently struggling to remove the malware and viruses that were installed by some of the in-built applications coming with this device. Tablet became very unusable, especially when it was using any kind of internet connection which was exploited by malware applications showing me tons of the ads and pop-up windows on screen.
It was impossible to download and install any application using Google Play store because tablet end in glitches running malware software in background thus occupying nearly all available memory. The only thing that would help for a while was rebooting it again and disabling any kind of internet connection, uninstalling and disabling malware and infected apps.
This would release some RAM but not for long. After few minutes tablet gets unusable and sometimes reboots itself. Each reboot would refresh and re-install removed malware software and same story happens again.
Then I came to idea to try to wipe all data using recovery mode, but even this didn't help. System was infected in its core.
Then I tried installing KingRoot, Stubborn Trojan killer, Malwarebytes apps using Wondershare MobileGO PC application for managing Android devices over USB. I was able to install manually downloaded .apk files of these apps to the tablet. But running this applications or trying to regain ROOT status would reboot tablet again and again giving me no other chance except to try to flash its ROM.
The main mistake I've made is not making any kind of current device ROM backup using MTK droid tool or any other kind of tool. Because I'm not too much in Android world, I though I could flash it (using SP Flash tool) with "similar" ROM content coming from different device but I was VERY VERY wrong. Doing flash with wrong ROM instead of my device ROM (which I didn't backup), I've made my tablet hardbricked, infact it is 99,99% dead because it doesn't want to turn on and charge anymore!
Please don't mess up Your device like I did with mine!!! It turns out that you must have 100% compatible ROM image with your device!!! To be 100% sure about Your device specs, You must previously read all information like firmware, motherboard, CPU, etc... using any kind of software (if your device is still alive) OR open it and see what's under the hood of device and make notes about it. For HOW-TO flash Android device research the Youtube/forums/blogs/google...
Anyway, there might be some hope if someone notices posts in this thread. My tablet can be decteded on PC once it gets connected over USB cable. In Win7 (32bit), after installing MediaTek USB VCOM drivers, it is currently seen on MTK USB Port (COM7). But once connected on PC over USB cable, it gets connected and reconnected on every few seconds. I've read somewhere on forum that this is expected case, but not totally sure. I'm still wondering why tablet is not detected under DA USB VCOM Port or Preloader USB VCOM Port as expected for flashing purposes in SP Flash tool.
I've already tried to use few ROMs and flashed my device but I couldn't find proper ROM yet. XWAVE brand cannot be found among few popular Android ROM websites.
After hours of searching I've found a thread about XWAVE XPAD G3 701 on some Vietnamese forum. The link is (message me)
After registering on this forum, forum revealed a link to the rar file containg ROM backup for this device. I've tried to flash my device with this ROM using SP Flash tool but it was still unsuccessful.
No matter how much I tried, I keep getting these 2 error codes (google them), 4032 and/or 1042. I didn't know if I'm doing something wrong or this ROM seems incompatible to my device version, but flash process is stuck at first stage in SP Flash Tool "DOWNLOAD DA 100%" (red bar).
Then I decided to look under the hood of my tablet and I found that my tablet's firmware is not the same as one in the ROM I've downloaded. This is probably why I can't properly flash this tablet (or I'm still doing something wrong or my tablet is 100% dead). Since this tablet has non removable battery, I've tried to keep pressing Volume - (and other key combinations) while connecting device to PC and before flashing starts.
Anyway, If anyone can make/share 100% compatible ROM image to my device specs for me/other people to try to flash it, that would be great.
My devices specs under the hood are NEXT :
**********************************************
Firmware from chip/motherboard : MY706DV2 (HJ(BI),4G+768M(MI),4.4W (QA)) | YXEL 2014080471E090100505 | QR code on chip scanned value : 080471V2H4G768M4.4W1J
It also has SAMSUNG chip (maybe memory) : SAMSUNG 404, KLM4G1YE4C-B002, N702VQB4C
Battery readings : T-356595P MTK, 3.7V 2800 mAh Li-On, 140822A WTD
Other SPECS
*********************************************
Hardware : MT6582 (MT8312 is Fake!)
Model : Xpad 3G-701
Build number : Xpad 3G-701.V1.0
Build date UTC : 20140819-160749
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V35, 2014/03/12 14:00
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1
SMP Sat Aug 9 15:18:49 HKT 2014