Related
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
So I received my TechMatte screen protector today. I installed it a few hours ago. I honestly didn't have high expectations for it. I had forgotten that I had a TechMatte screen protector coming, so installed my Ghost Armor screen protector when it came in on Saturday. When the TechMatte screen protector came today, I placed it over the screen just to get an idea of the coverage that it offered. I was impressed that it was truly edge to edge on top, bottom, and both sides! There literally is no room for error on install, which is a good thing in my opinion! Just use the hinge method to get it on there perfectly. Also, the Home button has a cutout for it specifically. Most screen protectors just have a U shaped cutout at the bottom, and they don't offer any coverage below the Home button. Even Ghost Armor for the Note 3 uses the U shaped cutout, where Ghost Armor for the Note 2 has a specific hole for the Home button. I expected the Home button cutout for the Note 3 to be the same as the Note 2, so I was disappointed to see that they slacked on the Note 3 Home button cutout. So earlier I peeled off my Ghost Armor screen protector and lined up the TechMatte screen protector to do the hinge method. TechMatte even includes 5 tape strips in the package that are labeled for using with the hinge method, very nice touch on there part! I used the included cloth to wipe my screen clean of any dust and/or fingerprints. The cloth they include is larger than any cloth I've received with any other brand screen protector too! So I layed the screen protector on the screen and pushed out any bubbles. There was surprisingly very few bubbles on the screen, and the ones that were there were very easy to push out. I get it on and it's lined up perfectly. After peeling off the last film from the top of the screen protector I get my first feel of the actual screen protector itself. I am truly amazed by how it feels! It feels just like the bare screen! Looks wise, unless you're really REALLY looking for it then you would never know there's a screen protector on it! An hour or so later I handed my phone to a couple friends an told them to check out my new screen protector. They didn't believe me at first! Lol. I had to point it out to them for them to believe me! They both said it feels just like glass and is perfectly clear and not even noticeable! Now I've been using touch screen phones for many MANY years, since the early Windows Mobile days. I've always had screen protectors on every phone I've owned. This screen protector is by FAR the very best I've ever used or seen! I've been a fan of Ghost Armor for quite some time, and always recommend them to everyone. Hard for me to believe, but that time has come to an end! TechMatte is hands down my new favorite! I'll be recommending them to all of my friends, and using them on all of my devices from now on! I took some pics with my Evo LTE, because it takes better photos than my Note 2. I'll post pics in the second post with it, so please no one comment until I get on my Evo LTE and put up some pics. It's hard to even see the TechMatte screen protector, but I'll try to get some closeups of the Home button and the top of the phone.
Here's the link (CRAZY LOW Price with a Lifetime Warranty!!) : http://www.amazon.com/gp/aw/d/B00FR...film note 3&qid=1382465346&ref_=sr_1_1&sr=8-1
I apologize for not having the link in the OP to begin with. Anyone considering a screen protector is crazy not to buy these!! This price is insanely cheap!! This isn't just for 1 screen protector either, you get 3 with this!! Better jump on this deal while they are on sale!! I'm not sure how long the sale will last, so you shouldn't wait long, if at all!
Sent from my White Sprint Note 3 via XDA Premium
Pics
Sent from my White Evo LTE using XDA Premium
More pics
Sent from my White Evo LTE using XDA Premium
It's only letting me attach 1 pic per post
Sent from my White Evo LTE using XDA Premium
Corner showing the gap, or lack thereof rather! Lol. This screen protector has incredible coverage!
Sent from my White Evo LTE using XDA Premium
Another
Sent from my White Evo LTE using XDA Premium
Sorry about the 1 pic per post. I'll just wait until tomorrow, use a digital camera to take pics, an use my laptop to post them. Bottom line though, if you want a screen protector, TechMatte is absolutely the BEST choice!! I'm going to remove every screen protector on my other devices and replace them with a TechMatte screen protector!! Give them a try, I guarantee you will not be disappointed!!
Sent from my White Sprint Note 3 via XDA Premium
Link to site selling them?
carlz28 said:
Link to site selling them?
Click to expand...
Click to collapse
Here is the link : http://www.amazon.com/gp/aw/d/B00FR...film note 3&qid=1382465346&ref_=sr_1_1&sr=8-1
This is an amazing deal!! 3 screen protectors for less than $5!!!!!
Sent from my White Sprint Note 3 via XDA Premium
Aren't these the amfilm screen protectors? I grabbed some when they had these for $.50 for a 3 pack the other day, just received mine in the mail but I don't yet have the phone to try them out. Not only did the shipping address say TechMatte, the screen protector itself looks just like the one in the OP.
If anyone's interested, you can get these at Amazon: http://www.amazon.com/gp/product/B00FRIK0TQ/
for $2.50/3-pack shipped with coupon code: NOTE350F
codes takes 50% off
Kawaisa said:
Aren't these the amfilm screen protectors? I grabbed some when they had these for $.50 for a 3 pack the other day, just received mine in the mail but I don't yet have the phone to try them out. Not only did the shipping address say TechMatte, the screen protector itself looks just like the one in the OP.
If anyone's interested, you can get these at Amazon: http://www.amazon.com/gp/product/B00FRIK0TQ/
for $2.50/3-pack shipped with coupon code: NOTE350F
codes takes 50% off
Click to expand...
Click to collapse
Cool thanks. Just picked up 2 packs. I have been using the SPIGEN protectors but twice now ordering from them the packages have been damaged and they refuse to replace them. Took it up with AMAZON customer service.
Hopefully these work well. Can't go wrong for the price.
Thanks OP for the review.
TechMatte screen protectors
I received my TechMatte screen protectors in the mail yesterday for my Note 3 and Nexus 7 2013. I had never heard of TechMatte or their products before so I wasn't really sure what to expect. Upon inspecting the packaging I became worried as the image of the SP showed that it did not have a cutout for the home button but rather an upside down U-shape that starts above the home button and leaves it open below. However upon opening the packaging and inspecting the screen protectors they do indeed have a cutout for the home button that fully surrounds it and thus provides coverage for the entire bottom region of the device.
Included in the package were 3 SPs, an anti-lint/dust microfiber cloth, a sheet of tape strips to perform the hinge method for install, a squegee card to remove bubbles, and installation instructions. Installation was very straightforward being that it is a dry install. The fitment is fantastic. Other than the speaker grill and sensors it FULLY covers the front of the device edge to edge with almost no gap. Clarity is excellent and so is the "feel". I have no sensitivity loss with my fingers nor with the S-Pen. I attempted to press on the protector fairly hard with the S-Pen and also tried to make indentions into the film with my finger nails and was unable to do so.
At the current asking price of $4.50 for the kit with 3 SPs on Amazon I would not hesitate to recommend these SPs to anyone and would probably say that these may be the best bang for your buck screen protectors you can get right now. :good:
ghostfaceg35 said:
I received my TechMatte screen protectors in the mail yesterday for my Note 3 and Nexus 7 2013. I had never heard of TechMatte or their products before so I wasn't really sure what to expect. Upon inspecting the packaging I became worried as the image of the SP showed that it did not have a cutout for the home button but rather an upside down U-shape that starts above the home button and leaves it open below. However upon opening the packaging and inspecting the screen protectors they do indeed have a cutout for the home button that fully surrounds it and thus provides coverage for the entire bottom region of the device.
Included in the package were 3 SPs, an anti-lint/dust microfiber cloth, a sheet of tape strips to perform the hinge method for install, a squegee card to remove bubbles, and installation instructions. Installation was very straightforward being that it is a dry install. The fitment is fantastic. Other than the speaker grill and sensors it FULLY covers the front of the device edge to edge with almost no gap. Clarity is excellent and so is the "feel". I have no sensitivity loss with my fingers nor with the S-Pen. I attempted to press on the protector fairly hard with the S-Pen and also tried to make indentions into the film with my finger nails and was unable to do so.
At the current asking price of $4.50 for the kit with 3 SPs on Amazon I would not hesitate to recommend these SPs to anyone and would probably say that these may be the best bang for your buck screen protectors you can get right now. :good:
Click to expand...
Click to collapse
Yea, I'd never heard of them before either, so I also wasn't expecting much. I must say though, I was pleasantly surprised! They also sent me a screen protector for my N7 FHD as well, as they saw in my sig that I had one. Have you installed yours yet? If you haven't yet, definitely use the hinge method! There is no room for error on install, as this screen protector really covers from every edge to edge!!
For those looking, definitely jump on that Amazon deal!! This morning I forgot that I even had a screen protector installed!! It truly is an incredible looking screen protector, because there is nothing to look at or see!!! Lol. I'm still in amazement over it! Like I said in the OP, I've been using screen protectors for a long time and this one is definitely the best!! There really isn't any competition to these!
The only negative, which is really a positive in my opinion, is that you must install it perfectly. I've said it before, but there really is no room for error as this screen protector covers everything!! You do get 3 in the package, so if you mess up on the first install you have 2 more tries. I got mine right on the first try, so as long as you're really careful then you can as well. I highly recommend using the hinge method though!! If you aren't sure what that is then watch some YouTube videos on how to do it and you'll be set!
Sent from my White Sprint Note 3 via XDA Premium
Yeah I installed them both last night. The Nexus 7s protector was more forgiving in it's fitment than the Note 3s IMO. The N3s SP was almost exact to the size of the screen inside the chrome bezel while the N7s left a little more room for play but since you gotta line up the camera and sensors into the small opening it made lining it up a little easier.
Link added to OP. I'll post it here also. 3 for less than $5!!!!
http://www.amazon.com/gp/aw/d/B00FR...film note 3&qid=1382465346&ref_=sr_1_1&sr=8-1
Sent from my White Sprint Note 3 via XDA Premium
So after a few days of use I'm just as happy as was the first day! Still looks perfect and swapping cases repeatedly hasn't bothered the edges of the screen protector! Still highly recommend these! You WILL be satisfied!!
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
My Review
I have to agree with the OP. A great product with great screen coverage and feel. I received mine from techMatte a couple weeks ago:
Full Disclosure: TechMatte provided me a free sample to test
I am not normally a big fan of screen protectors for my phones. Mainly because it's just a hassle to put on and the screen just doesn't feel right as compared to the naked screen (and I can never get them lined up right).
CONTENTS: The pack I received had 3 screens along with a microfiber cloth, plastic card to squeeze out any bubbles, an installation manual, and hinge stickers (for installation).
INSTALLATION: Installation was very easy and it's a dry install. I'm a perfectionist (which is why I don't normally like putting on screen protectors) and the supplied stickers for the hinge method of installation (which was outlined in the installation manual) helped me actually get it lined up perfectly on my first try!
LOOK: Once installed it was perfectly clear. No discoloration that I could discern. There were three bubbles that I wasn't able to squeeze out immediately specifically because I missed really small pieces of lint. I was a little frustrated at first because I had thought I'd done well keeping it clean (note, I would have been better served installing in a more well lit room...I'm sure I missed them because I didn't have good lighting while installing)...but, they were really small so I figured I'd give it a little time.
I'm pleased, and surprised, to say that after a couple days those last few bubbles actually went away leaving a nice, clean, clear surface.
FEEL: As far as feel, a big question I had going into it was how would the screen feel under finger and, more importantly, under the stylus. I have a friend who has screen protector where it's very rubbery and every time he uses the stylus on his Note 2 there are grooves left behind. I can confidently say that this screen protector does not have that problem at all.
I also want to call out that the screen protector does not have an affect on the sensitivity of the screen either with your finger or with the stylus.
Under finger if I dig my nail in a bit, I can feel that it's a bit rubbery but just normal use it's smooth without any noticeable drag. It does feel slightly different from a naked screen, but it's still pleasant and not distracting at all (and I feel that I'm picky on feel).
As for the stylus, I was surprised again here. Right after it was installed there was a little bit of drag when I used the stylus but that quickly went away as I continued to use it. If your extremely picky (or if you have a heavy hand) you might notice a bit of a difference but I don't.
OVERALL: I'm absolutely sold on this screen protector and would recommend it to protect your screen. Installation was easy with the included supplies, the protector is very clear and, unless you know what you're looking for, unnoticeable once on (provided there aren't any bubbles), it doesn't alter the feel of the screen much, and doesn't affect the sensitivity at all either with your finger or stylus.
The only caution I would throw out is to be careful when installing to avoid any lint under the film. If you've done these kind of protectors before then you probably already know this.
I am currently using spigen crystal clear sp which are very good but a total fingerprint magnet. How are these sp with fingerprints?
ukic said:
I am currently using spigen crystal clear sp which are very good but a total fingerprint magnet. How are these sp with fingerprints?
Click to expand...
Click to collapse
It think it attracts a bit more than the naked screen (which is surprisingly resistant to fingerprints) , but it doesn't seem too bad to me. But...I don't have a lot of experience with different screen protectors. I can say it's better about fingerprints than the naked Nexus 4 and naked Note 1.
stanglifemike said:
Pics
Sent from my White Evo LTE using XDA Premium
Click to expand...
Click to collapse
I have this screen protector, and I havent taken it off to try any of the others I have. It's THAT good. Once you line it up against the fat bottom, just lay it down.
Had some dust, lifted it up and used tape on the screen protector, and put it back down. Now I have ZERO bubbles and it's fantastic. 100000% clarity too. 5 stars.
Zerolemon 9H Ultra Glass Armor: Tempered Glass Screen Protector
Unboxing:
I received a review unit from Zerolemon. The screen protector was sent in a bubble wrapped package. The packaging on the screen protector itself is thin poster board with plastic cut outs for the various pieces. It came with the screen protector itself, a small micro-fiber cloth and an alcohol wipe.
Installation:
Zerolemon has installation instructions printed on the poster board packaging. I didn’t need them, but for though who do, the instructions don’t make sense at all. Luckily the pictures convey much more than the written instructions do.
I applied the screen protector in my bath-room after I had the hot water running in the shower for about 10 minutes to minimize any dust particles that were in the air. I tried using the micro-fiber cloth to clean the screen of any residual oil and particles. It did a good job getting rid of oily residue, but is horrible at picking up dust, which might be due to the cloth being tiny (2”x2”). Then I used the alcohol wipe to wipe down the screen one more time. That did the trick. It removed the rest of the particles.
After taking a plastic film off the screen protector I placed it on my phone. The great thing about it is that you can move it slightly to get it to fit perfectly then tap the middle of the screen and the screen protector will adhere to the screen like magic! I didn’t have any issues with bubbles.
Initial Impressions:
The screen protector is much thicker than a plastic one. It somewhat hides the home button because the screen protector is thicker than the protruding button. Not really an issue with me because I actually prefer that so I don’t accidentally press the home button when the phone is in my pocket, but it might bother others. Powering on my device and testing the responsiveness of the screen, the first thing I noticed how nice it felt to touch. Feels just like the glass on the phone. With the rounded edges I wasn't able to feel where the screen protector started and ended from edge to edge of the phone.
The screen’s responsiveness was noticeably diminished. All gestures and taps had to be deliberate for the phone to register the touch. I use the S-Pen quite often to create illustrations on the device. For regular navigation using the S-Pen it operated like normal, but I noticed that I had to push harder while doodling on the screen or using the hand writing recognition. Due to the diminished responsiveness I did have to go into “Settings>Controls>Auto-adjust touch sensitivity” and enable that option so that the screen would return to normal.
Viewing angles are comparable to naked screen.
I will update again in about 2 weeks after I’ve had more time to put it through the torture test of life.
Any info on how thick it is, it looks exactly like the same as the MIME Feather Glass. I use the s-pen with the MIME and I didn't have to turn up the sensitivity but it's only .15mm thick.
airmaxx23 said:
Any info on how thick it is, it looks exactly like the same as the MIME Feather Glass. I use the s-pen with the MIME and I didn't have to turn up the sensitivity but it's only .15mm thick.
Click to expand...
Click to collapse
It's 0.3mm according to their website.
I hope to be receiving mine soon and will comment on the touch screen responsiveness as well. I currently use a 0.4mm thick glass screen protector (it started to bubble randomly, so I needed a new one anyways), and haven't noticed any reduction in responsiveness, so hopefully my experience will be able to provide a different experience than the OP (especially as I'm going from glass to glass, while it appears as though OP went from plastic to glass, which in my opinion is an incomparable difference).
I just received my review unit as well. It's very thin and barely noticeable. I'm using it with my ZeroLemon Extended Battery and it fits perfectly under the case. I haven't had screen responsiveness issues as mentioned in the OP.
I'll post pics up a little later.
Sent from my SM-G900V using Tapatalk
received mine zerolemon screen guard today also. Will ihave to pop off the build in screen protector on this zerolemon case I'm using, in order to use the tempered glass protector? thanks
dschoenike
dschoenike said:
received mine zerolemon screen guard today also. Will ihave to pop off the build in screen protector on this zerolemon case I'm using, in order to use the tempered glass protector? thanks
dschoenike
Click to expand...
Click to collapse
The screen protector wasn't built in on my case.
If yours has one built in, then you should probably remove it.
Sent from my SM-G900V using Tapatalk
I got my review unit today and its pretty good. Mouahmong's review is almost spot on. If you know how to apply a screen protector you are good to go. However, if you have never done it before, watch a Youtube video because the instructions shown on the inside of the package are terribly written.
My advice on applying (especially if your house/apartment or wherever you live is dusty) do it after a hot shower. Doing so will let the dust settle.
The screen protector does have somewhat rounded edges so it's not sharp unlike some other cheaper tempered glass screen protectors. However, with a 0.3mm thickness, you won't even be able tell.
I didnt have much of an issue with the home button after applying the screen protector. Some other brands will provide a stick on item to put on top of the home button so its easier to press, but with this screen protector being pretty thin (0.3mm) you wont need it IMO.
Other than that, so far so good. If I find any cons, I'll update this review.
haza12d said:
The screen protector wasn't built in on my case.
If yours has one built in, then you should probably remove it.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
thanks for the answer. I figured I would probably need to remove it. thanks again for responding.
dschoenike
Hey everyone I haven't received my test piece yet but I was wondering about the link zerolemon provided it doesn't take me anywhere to provide feedback or suggestions.
Sent from my SM-G900A using XDA Premium 4 mobile app
Here are some pics with the Tempered Glass Screen Protector paired with the ZeroLemon Extended Battery/Rugged Case. This thing is very thin. The previous glass screen protector I had installed was too thick and caused the top corners to lift up. No problem here. Fits like a glove.
Installed the zerolemon screen protector a few days ago and ABSOLUTELY LOVE IT with my 10,000 mah battery and rugged case! I never liked screen protectors because I thought they took away the OEM glass feel and clarity. I now admit my past reservations were completely wrong and I will never have my phone screens go naked again! The zerolemon glass screen protector fits like a glove with the 10,000 mah battery and rugged case and I would strongly recommend the protector to everyone who owns the rugged case to give this a shot. Last thing, the cost of this is better than most of the other name brand protectors out there.
How is it in sunlight? Does it glare a lot?
sd97cl said:
How is it in sunlight? Does it glare a lot?
Click to expand...
Click to collapse
Haven't tried it in sunlight but it should glare just as much as the regular glass.
This isn't a anti glare screen protector.
So far it does well in direct sunlight. Minimal glare. Similar to stock naked.
Sent from my SM-N900T using XDA Free mobile app
sd97cl said:
How is it in sunlight? Does it glare a lot?
Click to expand...
Click to collapse
It is the same as the OEM glass screen, no better and no worse. I think the glass protector feels smoother than the OEM screen. Maybe it's because the oleophobic coating was starting to wear off but I swear the new screen protector feels buttery smooth when I swipe my finger or use the s pen.
DarkManX4lf said:
I got my review unit today and its pretty good. Mouahmong's review is almost spot on. If you know how to apply a screen protector you are good to go. However, if you have never done it before, watch a Youtube video because the instructions shown on the inside of the package are terribly written.
My advice on applying (especially if your house/apartment or wherever you live is dusty) do it after a hot shower. Doing so will let the dust settle.
The screen protector does have somewhat rounded edges so it's not sharp unlike some other cheaper tempered glass screen protectors. However, with a 0.3mm thickness, you won't even be able tell.
I didnt have much of an issue with the home button after applying the screen protector. Some other brands will provide a stick on item to put on top of the home button so its easier to press, but with this screen protector being pretty thin (0.3mm) you wont need it IMO.
Other than that, so far so good. If I find any cons, I'll update this review.
Click to expand...
Click to collapse
So your saying to install it after a hot shower as in install the unit on your phone in the bathroom? Ive heard of the method before but didn't quite understand.
xbmoyx said:
So your saying to install it after a hot shower as in install the unit on your phone in the bathroom? Ive heard of the method before but didn't quite understand.
Click to expand...
Click to collapse
People recommend installing in the bathroom because steam from the hot water will prevent dust particles from floating in the air.
Sent from my SM-N900T using XDA Free mobile app
I love it so far. The packaging is nothing fancy but the product is top notch. I previously had the Nillkin tempered glass and this one is identical to it which is a good thing. All the cutouts are perfect. It feels just like the naked screen. The price is very much reasonable unlike those other brands selling them for $20+ and the quality is the same.
Sent from my Galaxy Note 3
I just received my review unit and will update this thread with my review in a few days. I did notice though after installing the screen protector there is a "bubble" in the top portion of the screen right overtop the notification panel and directly under the Samsung logo. I thought maybe I installed it wrong or slightly sideways so I very gently pulled it back up making sure I didn't touch the sticky backing and realigned the glass with the home button and pressed it back down firmly. The "bubble" is still present but a tad smaller then it was originally. I kept rubbing the screen hoping to eliminate the bubble like other brand plastic type screen protectors and no dice. I will give it a few days and hopefully it will work itself out. I hope I didn't somehow get a "defective" glass that wasn't completely flat which is causing this bubble. See attached pic showing the "bubble" and the packaging stating it has "Bubble Free Installation". [emoji53]
xbmoyx said:
I just received my review unit and will update this thread with my review in a few days. I did notice though after installing the screen protector there is a "bubble" in the top portion of the screen right overtop the notification panel and directly under the Samsung logo. I thought maybe I installed it wrong or slightly sideways so I very gently pulled it back up making sure I didn't touch the sticky backing and realigned the glass with the home button and pressed it back down firmly. The "bubble" is still present but a tad smaller then it was originally. I kept rubbing the screen hoping to eliminate the bubble like other brand plastic type screen protectors and no dice. I will give it a few days and hopefully it will work itself out. I hope I didn't somehow get a "defective" glass that wasn't completely flat which is causing this bubble. See attached pic showing the "bubble" and the packaging stating it has "Bubble Free Installation". [emoji53]
View attachment 2863973
View attachment 2863974
Click to expand...
Click to collapse
Mine went on smooth without any bubbles. Maybe you got a bad one?
Sent from my Galaxy Note S5
I purchased a MIME tempered glass screen protector after trying others without success. First I had a Spigen nano glass tr which was nice. The Spigen didn't last long, my first 3 would lose the ability to adhere in certain areas after 1-3 weeks and my last one cracked without me dropping my phone. All of them were replaced by Amazon thankfully. I then tried the Extreme guard tempered glass which was so and I took it off after a day. I then did some research and decided that MIME would be the best because it only had the ear piece cut out as opposed to the huge ugly cut out that others have.
The MIME was by far the easiest installation I have come across. They include a anti dust sheet that is like a giant plastic screen protector that you user to get the dust off your screen before you place the glass on it. Then you just peel off the back and let the adhesive do the work. The quality is also unmatched in terms of the feel. There is no loss of touch sensitivity and the oleophobic coating doesn't wear off like my Spigen one did on my Note 3. It is also worth mentioning that the MIME has curved edges so it has a very nice feel and the curve prevents chipping for those of us who use the G3 naked.
After having my MIME for 7 weeks and surviving many small falls it finally broke. I was at school heading to my physics lab and my phone slipped out of my hand while opening a door. It fell down about 4ft and bounced onto some rocks off to the side of the building. I was worried that my phone was broken after that hard fall but thankfully only the MIME broke and there was no damage to my screen or phone at all. I was using a Cruzerlite TPU case which as most of you may know is very thin, yet it stands up to abuse very well.
Overall I'm very pleased with MIME and they even give you 40% off a replacement for any reason if it becomes defective or if you break it like I did. I'm ordering another one as soon as I get my code for the discount. Until then its back to the plastic one I had laying around my apartment.
When my replacement comes I will post an unboxing of the new one to complete this review. If anyone has questions feel free to let me know.
Here are the pictures of where it hit the rocks:
Great review.
I'm trying to decide which maker I get next.
I'm currently using a Spigen too and I have the same problem with the top corners losing adhesion. It looks awful.
Here is the one I am using. Its is sit on and has been on for going on 3 weeks now. I am very pleased with it..Good price and fit perfect even a case on the phone. Its the ICarez brand of Amazon..
Http://amzn.com/B00KGSW734
Sent from my LG-V410 using XDA Free mobile app
esimon311 said:
Here is the one I am using. Its is sit on and has been on for going on 3 weeks now. I am very pleased with it..Good price and fit perfect even a case on the phone. Its the ICarez brand of Amazon..
Http://amzn.com/B00KGSW734
Sent from my LG-V410 using XDA Free mobile app
Click to expand...
Click to collapse
I actually ordered one as a backup for until my MIME gets here. I hate using my phone without the tempered glass because the feel isn't the same and neither is the protection. The MIME is still three best tempered glass that I have tired over the past year or two with the 6-7 brands that I have used. I highly recommend it plus it doesn't suffer from the adhesion issue that others have.
Edit
also the two impact marks on the glass were fairly deep but MIME did a great job with their silicon barrier preventing any puncture or damage to my screen.
In the german Forum Android Hilfe is a posting of one user who´s G3 crashed on the floor, the Glas-Protection-shield without any damage but beneath the impact shattered the Display and the touchscreen modul.
Not even a scratch on the Hardglass Protector
Strange.....
I have a dbrand in order. It's gorilla glass 3 and .2mm thick. I am extremely careful with my electronics. I have never dropped my phone.
cynikalJ said:
I have a dbrand in order. It's gorilla glass 3 and .2mm thick. I am extremely careful with my electronics. I have never dropped my phone.
Click to expand...
Click to collapse
I am very carefully with mine as well, but unfortunately things happen when you are in a rush. I dropped my Note 3 with a Spigen glass tr and neo hybrid case from 7 feet and it was perfectly fine. I think it just depends on how it impacts the ground. Post some pictures of the dbrand glass, I'm curious to see how the cutout is on the top.
Its been 3 days and no response from MIME... Their website says they are having issues with their contact system. Does anyone know of another tempered glass that only had the speaker cutout and isn't Spigen or MIME? I'm anxious to get my tempered glass back and I currently have an icarez as a temporary replacement until I can find a better one.
Pilz said:
Its been 3 days and no response from MIME... Their website says they are having issues with their contact system. Does anyone know of another tempered glass that only had the speaker cutout and isn't Spigen or MIME? I'm anxious to get my tempered glass back and I currently have an icarez as a temporary replacement until I can find a better one.
Click to expand...
Click to collapse
I currently have an icarez on. How do you think it compares to the MIME?
jbradt said:
I currently have an icarez on. How do you think it compares to the MIME?
Click to expand...
Click to collapse
It feels about the same, but mine keeps getting a tiny bubble off to the side which is annoying. I installed it perfectly with 0 bubbles/dirt and it keeps getting this rainbow bubble. So the quality isn't as good because it shouldn't keep popping up, also the cutout is not something that I am a fan of. If it keeps popping up I am going to send it back, but other that that, and the cutout its fairly nice. The fit isn't as close to the edge as the MIME so the gap bothers me since I'm OCD about how things fit on phones. (you can thank the years of going to school for engineering for that) I think that if I had a better cutout on the top (i.e. only for the speaker ) I would keep it as a permanent solution if it stays adhered to my screen.
Update MIME got back to me and sent me the 40% off a replacement. It should be here by Friday so I'll post a updated review with the unboxing and installation around then.
If I buy the MIME Tempered glass from a reseller (i.e. amazon) and not directly from MIME website, will I be able to receive the 40% off replacement ?
tweetious said:
If I buy the MIME Tempered glass from a reseller (i.e. amazon) and not directly from MIME website, will I be able to receive the 40% off replacement ?
Click to expand...
Click to collapse
Amazon doesn't sell them as far as I know. I believe they are only sold directly from MIME but you would have to email them to find out.
Good luck with Mime I tried both there ghost and there regular on my nexus 5 , both failed within a month , I talked a good friend into buying one also at the same time , his failed also , chips on the corners , on each one , and I'm not talking about dropping it either , at first I thought it's my fault for trying something new at that time there Ghost had just come out , so after three times I'm sorry folks in world that means your OUT, yeah big deal they will keep selling them to you at I forget 60 % off or 40 % doesn't matter if the product keeps failing time after time every time , I've had an Iloome on my Note 3 for almost a year now still perfect as the day I put it on , and I bought an icarez for my G3 a couple mnths ago still perfect also , maybe it was just my bad luck , and my friends also , but if I had a choice I would buy Either an Icarez or an Iloome , I'm sure spigen's are great but at 3 times the price there are better options.......................Peace
if I use the Tempered glass with the Original LG G3 Quick Circle Case, am I going to have any problem to keep the flap in place (attached on screen, not slightly raised) due to the slight thickness that the glass adds?
tweetious said:
if I use the Tempered glass with the Original LG G3 Quick Circle Case, am I going to have any problem to keep the flap in place (attached on screen, not slightly raised) due to the slight thickness that the glass adds?
Click to expand...
Click to collapse
My quick circle never liked to stay shut even without a glass screen protector. Spigen makes a magnet clip to keep it closed if you're worried about that.
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
I just ordered the matte and the ultra clear screen protectors. I didn't buy the body because I have a Rhinoshield bumper and back protector. I'll post a review once they arrive.
Good product the body shield is
Have been using the Gadgetshielz full body protector for 6 months now. It is quite good and the cuts are precise. Quite a lot of work, applying them is. Be patient after applying, in a week or so, the bubbles and wobbles will sort themselves out. Was hard to believe when I completed installation and saw what a mess it was.
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Using their screen protector, with my rhinoshield bumper case and no bubble. Wanted glass first but all those that I bought, the case lifted them or they had the big halo, lifting all around cause the curve screen.
http://s30.postimg.org/6k9nxdkm9/1.jpg
http://s30.postimg.org/u2bgpk80x/4.jpg
They are working way far better than the TGP.
billubakra said:
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
Click to expand...
Click to collapse
Thanks mate. I bought two and will report when it arrives
So, here's why review-
Finally ordered them. It was my first time that I was installing any sort of protector and I was super nervous. The protector kept coming off. I had to wet it with the solutions many times. I drove out the bubbles as many as I could but the end result was way too foggy and messy. But after 48 hours everything was gone, except few dust and fingerprints particles which are my fault BTW there's a huge particle of dust on the back button. Can I lift it up just a tad to remove it? I still have the solution, I am planning to wet it to reapply. Will it work?
Also can anyone suggest a good cover for S7? My current one is a chinese one, but I think it will remove the side protectors if I take the phone out few times because with the side protectors the sides bulge out a bit. @r3xx3r @ere1nion
Any way to get the same cover in India?
iBolski said:
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Click to expand...
Click to collapse
I searched for a month, ordered like 10 different tempered glasses from various websites but they all sucked. GS's protector is not a glass but it is the best alternative to a glass.
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
billubakra said:
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
Click to expand...
Click to collapse
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
MrDusan said:
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
Click to expand...
Click to collapse
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
billubakra said:
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
Click to expand...
Click to collapse
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
MrDusan said:
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
Click to expand...
Click to collapse
Yes, since there's no curved/rounded tempered glass available so still using them. Go for them Brother.
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
James.Markham0757 said:
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
Click to expand...
Click to collapse
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
An update, I used my phone with the Samsung Gear VR yesterday and when I removed it the protector from the upper side of the phone, where the front camera is got removed I tried to paste the same but it is full of bubbles now . Is anyone else using GS's protector with VR?
billubakra said:
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
Click to expand...
Click to collapse
Correct it is not. I use the Otterbox Commuter and Otterbox Defender so this is not an issue for me particularly. I had a partial screen protector on already so no shift in change for me there either. I just received mine in the mail today. The back application was by far harder than the front. I didn't get it perfect. It's the material used on the back. I will not be testing this screen protector but I feel confident with it on. Hopefully it will never need to prove itself.
So, my protector is screwed thanks to Gear VR, it kept on removing the upper part of the protector every time I put the phone in the Gear VR or took it out. Has anyone tried the so called buff guard(a type of tempered glass) which covers the whole screen even the edges? Is there any alternative for the GadgetShieldz protector?
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you have to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
iBolski said:
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you can to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Thanks for such a detailed review. There are many protector glasses of that sort available in India, all of them are manufactured in china, but not the brand which you have mentioned. The reviews of the chinese one's is pathetic. So, I didn't go for them. Can you please check and confirm whether the phone fits fine in Gear Vr with the protector that you have installed or not?
This one, though its for the Edge model, looks tempting but I will wait for an early bird's review before ordering the one for the non-Edge version which should be available by tomorrow-
http://www.amazon.in/CEDO-Samsung-G...ems&ie=UTF8&qid=1489471980&sr=1-4&keywords=s7