I've been searching here and in other forums about this issue that I'm having and I'm not sure if someone else is having the same issue.
I have 2 earphones, one is the one that came out of the box (HTC with black flat wires and red earplugs) and also bought an HTC urBeats headset (red round cable with heavy metal black earplugs).
Every after a call, there's a loud static cracking sound that happens and it's getting pretty annoying specially when you had the call in the highest volume.
Is there anyone experiencing this? Is it a unit issue, software issue... need help!
Yes!! So far as I can tell, it only happens with HTC wired headsets. In my case it started happening suddenly about 3 weeks ago, and I thought it was related to using an old car charger that had a faulty connection. I've had my M8 since it was released, and originally was just using a fairly cheap set of Sony miked headphones, and never noticed the (to me) painfully jarring screech noise upon disconnect until I used the HTC ones that came with the phone. No static with Jaybird Bluebudz Bluetooth headset. I don't know what is causing it for certain though.
Sent from my HTC One_M8
I noticed that it does not happen with bluetooth connected devices. I have a Jlab Crasher and calls works well too.
Has anyone tried other earphones? I'm wondering if it's isolated to HTC earphones or wired earphones in general.
With mine, I just confirmed it happens on all wired headphones, not just the stock ones. Initially it was just on the OEM headphones. Another thing that happened on both the OEM and my basic mic'd Sonys is that it will disconnect the call I'm on. I hope I don't have a defective headphone jack. Really don't want to have to return this thing.
Sent from my HTC One_M8
Related
Hey..basically I walked home in the rain today, using my original HTC Headset that came with my Touch HD. I got home, and a couple of hours I tried to make a call using the headset to find that although I could hear the caller, they could not hear me through the headset. All was fine once I used the handset alone, so I assume the rain has affected the microphone in my headset.
Anyone experienced this before? More importantly..anyone experienced this and managed to get their headset to work again? As is, i'm going to try and leave it over night to see if it makes a difference, and any moisture has evaporated..hopefully this will solve the problem. I will keep you all updated!
Also, does anyone know of an alternate headset with a microphone that has fairly decent sound quality..the stock HTC ones aren't all that great, and I can't use my Sennheiser HD205's as I need to microphone in a headset. Any suggestions welcome.
Many thanks in advance!
UPDATE: I've just found that the cable of the headset is damaged near the jack itself, so a replacement will be necessary...any suggestions?
there is no other headphone than bose. if u really want to listen music (at least of me) but
go for sennheiser £19 that one is made for iphone one for normal use if u dont want to pay bose.
i had headphone misery with htc touch hd and bose together,,however,
i bought this sennheiser i feel this is best for price. if u dont want to pay bose.
cheers mate! Think i'm going to go for the Sennheisers
HTC Touch ProII
I have exactly the same problem that just the mic on the headset is not working... but this was an out of the box! So I assumed that it was the headset, and bought a new one. Alas the new one didn't work either. I also bought an htc adaptor and connected a 2.5 mm mic head set and the voice came thru very quitely for a couple of seconds and then died. I don't think its the software... I updated my rom to:
ROM 1.86.401.0 (67102) WWE
And changed the Orange SPL to Rhodium-HardSPL_V2_00R3
Any one got any ideAS?
Music plays fine out of the wired headset...it always has. The headset has functioned properly until about two weeks ago. At that time, my Atrix began to think that I was pressing the headset button. Constantly. Over and over. Any time the screen is on with the headset in, it redials automatically. When the screen is off, it does it too, because when I turn the screen on, it gives me the vlingo vs. voice command box. Also, when I make a call with the headset plugged in, the other person can somehow not hear me at all, until they call me back, and it's fine. The phone thinks the headset button is being pressed once every few seconds. THIS IS INCREDIBLY ANNOYING.
I know it's not the headset, because I've tried three different headsets (two by Motorola, both the 'official' wired headsets of the Atrix, and one third-party), all with the same result. Also, it's not just my phone! Oddly enough, I replaced my Atrix with AT&T's warranty, and THE NEW PHONE HAD THE SAME PROBLEM.
Has anyone else experienced this, or have the slightest clue what is going on? I've looked around the internet for weeks now and I haven't seen a single instance of it. Pleeeeease. This is brutal.
My headset with mic and button does not have any issues. Its the bose MIE2 mobile phone headset.
Yes I have experienced this as well and it is super annoying I will prob swap it out and hope I don't get another messed up one. Sometimes when I am in my car and connected to my bluetooth handsfree it'll do the same thing and start a song playing and I don't even push anything!!! Hope someone figures this one out.
theres defo something funny about the atrix headphone jack and remote controls.
At first my nexus one remote worked fine with it, but it started doing funny things, then flat out would go crazy (issuing commands without me touching it etc.)
Gave up and went wireless, now I only use wired @ the gyma dn they're just dumb headphones w/out remote
ME TOO!!
Yes, yes, and yes on having this problem. I use my headphones (SkullCandy FMJ) sometimes when riding my bike and yesterday all I kept hearing was "please say a command...did you say...I'm sorry please try again" over and over...hard to deal with at 70MPH!!! Hope this gets fixed, I thought it was my headphones, but it sounds like another GB issue. I don't have any problems when using my SENA SMH10 Bluetooth inside the helmet.
I had this same problem, mine got randomly solved. You could find how the wiring world for the Atrix and block that connection or cut off the controller on the headphone and solder your headphones back together.
Sent from my MB860 using XDA App
Thanks for the feedback, but a)I'm not looking to do any soldering or rewiring (I'm good with software mods, but not hardware mods), and b) it never happened until recently, then I swapped out the phone for a new Atrix, and it happened right off the bat - again with all three headsets. Tried a bluetooth, worked fine, no problem.
I tried a new headset (skull candy something-or-other) and it's been working so far, inexplicably.
I made a voodoo doll of my Atrix and poked it a bunch of times in its little voodoo headphone jack. Seems to have done the trick. I'd recommend that method.
I have this problem too with my headphones from my Sony x1, or x10. I cant remember which one. But as soon as I plug them in the phone goes nuts!
Which really sucks because they are they best headset/ headphones I have ever used for my funny shaped ears.
I think mine fixed after I dropped it and the headphones came out Anyways as long as its resolved that's awesome.
Sent from my MB860 using XDA App
Anyone having the problem using the pure music widget, by any chance? Uninstalled that and hasn't happened since with any headset.
Sent from my MB860 using XDA Premium App
i also started to experience this issues.At first i thought it is kernel or ROM issue but then after multiple test and experiment it is the Atrix 3.5mm headset jack is the culprit.If im not mistaken it is due to pressure contact sensor inside headphone jack.Please anyone know how to rectify this kind of problem do post your solutions for us.TQ
rknight68 said:
Yes, yes, and yes on having this problem. I use my headphones (SkullCandy FMJ) sometimes when riding my bike and yesterday all I kept hearing was "please say a command...did you say...I'm sorry please try again" over and over...hard to deal with at 70MPH!!! Hope this gets fixed, I thought it was my headphones, but it sounds like another GB issue. I don't have any problems when using my SENA SMH10 Bluetooth inside the helmet.
Click to expand...
Click to collapse
You bike at 70MPH? Holy.
so no one found a real fix or solution for this problem? Maybe we need to make a petition and submit to motorola
I had the same problem with a BB9700. It ended up being a damaged headphone jack. I figure some crap from my pocket had been in the jack when I plugged in the head set. Which jammed everything into it wrecking the receiving end of things.
Luckily I had a spare housing which came with a new jack. I'm not sure if it's as easy to replace on the Atrix since I haven't had the opportunity to tear it apart yet.
Power amp has settings that fix my controls and it works great.
Sent from my MB860 using XDA Premium App
Still no one ever face this kind of problem?
Can anyone confirm that this could fix our problem? http://forum.xda-developers.com/showthread.php?t=1301998
I have same problem too. But I have this problem on stock ROM and CM10.1 (with 3.1 kernel) ROM. I don't have this problem with any other ROM.
Full description of the problem:
I just got my EVO 4G LTE the other day, as a replacement to my original EVO 4G. However, I noticed when it was plugged into my car's AUX port, it puts out a high-pitch (like a teapot) noise. This noise happens as long as the headphone jack is powered up (something playing). Even if I turn the phone's volume down all the way, the high pitch is still heard. Otherwise, the audio from the phone can also be heard normally.
Things I've tried:
1. Different cables known to work. All act identically.
2. Headphones. They work fine.
3. Another car's AUX port. Worked fine.
4. Jiggling the jack on either end causes the pitch to change momentarily, but does not go away.
5. Slightly unplugging it from the car side (so one of the channels is not connected) makes it go away, leaving me to believe the high pitch noise is only coming from one channel (I believe the right channel, hard to tell).
Things I don't want to do:
1. Get a new car stereo.
2. Use a Bluetooth adapter. I already have the Stereoclip, and it doesn't do phone calls. Anything else sounds awful with music.
Does anyone have any solutions? I think its some sort of strange feedback/grounding issue, but I have no idea how I would fix this.
I don't have a solution, but I am experiencing the same issue with the phone plugged into my car's AUX. As long as music is playing I can't really hear the whine, but between songs it's pretty annoying.
I haven't tried playing around with the different EQ settings. By default it's been going to Beats. I may switch to a different setting or try a different player like Winamp. I'm currently using the HTC media player.
jasonkc25 said:
I don't have a solution, but I am experiencing the same issue with the phone plugged into my car's AUX. As long as music is playing I can't really hear the whine, but between songs it's pretty annoying.
I haven't tried playing around with the different EQ settings. By default it's been going to Beats. I may switch to a different setting or try a different player like Winamp. I'm currently using the HTC media player.
Click to expand...
Click to collapse
In my experience it has absolutely nothing to do with what app is being used, nor the EQ. It's nothing software as far as I can tell.
This fixes it:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ
if your phone is plugged into the car charger and your audio jack is plugged in to listen to music. what our hearing is a ground loop from the cars alternator. try unplugging the power supply and see if that helps..
papadunit said:
if your phone is plugged into the car charger and your audio jack is plugged in to listen to music. what our hearing is a ground loop from the cars alternator. try unplugging the power supply and see if that helps..
Click to expand...
Click to collapse
The car charger makes no difference. I have tried using nothing but the audio cable in the phone and still had the static.
I was under the impression that a normal ground loop would require a charger, but...
Modplan: are you sure this will fix it if the noise occurs even without the charger plugged in? The noise is high-pitch, not really a hum, so I'm wary as to whether it will help here.
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
I didn't want to go through the vicious cycle of returning my phone over and over until i get one that didn't have this fault so i just went with a samsung hs3000 hardwired in to my car.
lacrossev said:
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
Click to expand...
Click to collapse
I wasn't able to replicate this.
I've had the same issue, but it's only when charging. I figured it had something to do with the aluminum body and, as papadunit said, a problem with grounding and your car's alternator and blah blah blah science.
modplan said:
This fixes it:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ
Click to expand...
Click to collapse
I'm happy to report that this actually did solve the problem, amazingly. Thanks!
Actually had same issues this passed weekend but with my asus transformer. Was using it for navigation tethering from evo with both charging from my 400w inverter. Plugged transformer into aux and had same high pitching noise only when inverter was plugged in. Even tried different audio cables, same chit.
Sent from my EVO LTE
Headset Jack's other issues
I can confirm the same behavior with my EVO 4g LTE. My HTC Touch Pro 2 or Iphone 4s never had any of these issues with my vehicle's AUX jack. I also verified that if I turn the volume on the phone all the way down that the noise is audible on the vehicle's sound system. It also doesn't matter what player I use or if I add any equalizer settings to the audio. Finally, the noise is present whether the car is running or not.
Can you guys confirm: If you pause the audio on your player does the whine end about 4 seconds after and startup again if you press play? Or if you shut the player down does the noise go away shortly after?
I did some research and some said it has to do with the AUDIO DAC in the phone turning on and off as audio is played, paused, etc. If the output device has high sensitivity these sounds appear.
I had another issue with my Plantronics wired headset distoring when making phone calls. It did not present the whine but it distorted the callers voice as if the treble or bass was too high. I tried various audio settings but nothing changed. With other headsets the issue does not present itself. I think that the audio DAC is also sending higher/lower frequencies that are greater than some headsets can handle.
That Kensington thing that was posted can easily be made with common household parts. Basically all you need to do is take the big bulgy thing from any cable that would have it and attach it to your audio cable. It works best if you have one near each end of the cable. it's called a clamp-on ferrite bead and is just a clip with iron ferrite in the middle. Since i'm new I can't post a link buuuut what I can do is tell you the keywords to look up on google for the ehow link: cable magnets eliminate emi . enjoy!
lacrossev said:
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
I didn't want to go through the vicious cycle of returning my phone over and over until i get one that didn't have this fault so i just went with a samsung hs3000 hardwired in to my car.
Click to expand...
Click to collapse
Mine changes pitch according to my cars rpms
Sent from my EVO
I am getting this with headphones, i have used multiple brands and its hit or miss but more hit than miss :laugh:, anyone getting it in there headphone?
I was getting this issue until I installed a custom ROM. Running MeanROM right now with no background noise. Seems counterintuitive to me...but whatever.
J
Sent from my EVO using xda app-developers app
dankorzon said:
That Kensington thing that was posted can easily be made with common household parts. Basically all you need to do is take the big bulgy thing from any cable that would have it and attach it to your audio cable. It works best if you have one near each end of the cable. it's called a clamp-on ferrite bead and is just a clip with iron ferrite in the middle. Since i'm new I can't post a link buuuut what I can do is tell you the keywords to look up on google for the ehow link: cable magnets eliminate emi . enjoy!
Click to expand...
Click to collapse
http://www.radioshack.com/product/index.jsp?productId=3012599
Dankorzon, is this what you're talking about? If so I'm going to go get some tomorrow. I'm having this feedback issue too, but it is only when the car charger is plugged in. But I'd love to get rid of that sound. Drives me crazy.
SOLVED: I used a ground loop isolator
I posted earlier that I had the whining noise in my car even with the engine off. So it wasn't related to an alternator issue. I use a Blitzsafe (blitzsafe.com) device to add a line level input jack to my Honda Accord's stock radio interface. It works well with all my other devices except the Evo 4g LTE. This past weekend I did a little tinkering and noticed that if I pulled the RCA jack on one channel (left or right) every so slightly so the ground tabs weren't touching the noise disappeared. With only one channel connected the noise is not present. I'm not sure why the noise is present with both channels connected but it definitely pointed to a ground loop problem. I did some research in audio forums and some said that a wire could be jumpered so the RCA ground touches the receiver chassis and that would solve the problem. Unfortunately that did not do anything. I touched several different grounding points near the receiver but the sound was always present.
I went to Best Buy and purchased this: http://www.bestbuy.com/site/Fierce+...36.p?id=1218186610567&skuId=9855136&st=ground loop&cp=1&lp=1 It works great. For whatever reason the EVO 4g LTE's DAC must be sensitive or not have the right filter to block the ground signal. This explains why the Kensington product also works.
I also solved my headset issue. I can confirm that older corded Plantronic headsets will not work well with the EVO. The EVO distorts the speaker in the headset. I'm pretty sure it's because it sends lower bass frequencies than the speaker can handle. Only solution was to use a newer headset.
Thanks all for your help.
phiphiJR said:
http://www.radioshack.com/product/index.jsp?productId=3012599
Dankorzon, is this what you're talking about? If so I'm going to go get some tomorrow. I'm having this feedback issue too, but it is only when the car charger is plugged in. But I'd love to get rid of that sound. Drives me crazy.
Click to expand...
Click to collapse
That is what he is talking about, but that is NOT what the kennsington device is. Google "ground loop isolator" for info on what the kennsington is, it is NOT simply an aux cord with ferrite beads on it.
I've got the same problem in my car. This only happens when plugged into the charger. I'm going to try a ground loop isolation device which will arrive sometime next week.
I guess I don't understand why the phone would only do this when no music is playing though. It makes me think maybe a patch could solve the issue if HTC knew what the issue was.
EDIT: Moderators, please feel free to move this thread to the troubleshooting/Q&A forum. I didn't realize it might belong there... Sorry!
OK so I got a new HTC One and so far I love it in all aspects except... the following:
With a headset plugged in to the headphone jack (earbuds with in-line mic and button) any amount of jostling or rotation of the plug in the jack causes my phone to skip songs, stop playing music, and begin redialing the last call in my call log. This issue makes the phone practically unusable for listening to music, as even the slightest shaking of the plug (i.e. from phone in pocket while walking, movement of headphone cord from turning head left or right while sitting still, etc) causes problems.
I thought it was a problem with the individual device I got so T-Mobile was nice enough to send me a new HTC One...
And it has the exact same problem.
I have tried several different headsets with button and mic. Notably, all of the headsets with mic I've tried all work flawlessly on all other devices.
Has ANYONE had this problem?
Note that I Intend to record a video of the problem for evidence, but I'm pretty convinced its a design flaw in the HTC One.
At this point I have all intention to go with a different device, as much as that pains me to say (probably the Xperia Z)
EDIT2: After some experimentation, I have discovered the problem. It is a ridiculous design flaw on the part of HTC. I will post pictures later along with videos. In theory it can be remedied with a new set of headphones of a certain style or possibly some electrical tape or other insulating material, but I really don't think that should be a requirement of using the HTC One.
EDIT4: See here for my post on reddit with a description of what I believe to be the cause of this problem: http://www.reddit.com/r/htcone/comments/1k6ia1/illustration_of_a_design_flaw_with_the_htc_one/
And here is a link directly to the photo album on imgur with descriptive captions: http://imgur.com/a/uXvn3
i just picked up a set of ear bud n mic headphones today and played music and did voice commands with it today and had no issues but it was a short period of time...i will try to replicate ur issue and report back later today.
its a issue with something of htc software i believe. it was doing similar with my skullcandy ink'd second gens.
i looked into it a lil but not alot. but it seems only certain headset/earbud combos work properly. i really dont know why theyd have it like that. but for me i had to play around with the mic button and what not.
It's the head set I have earbuds and soul, soul works fine
Sent from my HTC One using Tapatalk 2
I've run into this problem on other phones before, but it was always the 3.5mm jack. Either it was tarnished or the case/jack design combo was causing it to not seat fully. Check very closely that the jack is fully seated and maybe try with another set before condemning the jack in the phone as bad.
I believe I have diagnosed the cause of this and other problems. Please see the OP for links to photo album with descriptions.
I purchased mine back in june and never had this problem. Ive used 2 pairs of headphones with the device (some $5 kyocera promo headset from when I worked at metropcs and a pair of Sony MDR-XB500). Only thing I could think of would be faulty software/hardware (phone jack) combination.
LifeEscalade said:
I purchased mine back in june and never had this problem.
Click to expand...
Click to collapse
yeah , it's right.
I have this very issue on my HTC one Since my wife's HTC one doesn't experience it with the same headphones I just concluded it was some tolerances that were off on mine I mainly use Bluetooth so I didn't feel it was a big enough issue to return. I had originally searched to see if it was a widespread issue, but could not find any others who had it.
I have not had the problem, either with a headset or an AUX cable I use for my car stereo. The headset jack on mine fits very snug and the plug does not touch the housing except maybe a very small area where the lip is metal.
I have an HTC one M8 running stock 6.0 Marshmallow. I've been using these Amazon headphones for over a year with no issues. However as I was entering my house yesterday the music I was listening to all of the sudden stopped and whenever I plug the headphones in, any audio (call or music) plays through the phone's speakers.
I tried the headphones in my computer and they work fine. I also took another cheaper of headphones I have laying around to see if the headphone jack was the issue and I was able to get sound from the cheaper headphones.
I also tried rebooting the phone to see if it was some sort of software glitch. This whole thing is pretty strange. Any suggestions or insight would be greatly appreciated. Thanks.