Here is a guide to root our korean note 3 neo..
1. Flash stock kitkat rom in pc odin.
2. Download towelroot created by famous ps3 modders geohot and install.
Links: http://forum.xda-developers.com/showthread.php?t=2783157
3. After installing the apk open it and click "make it rain" and it will promt you that it is success.
4. Reboot and voila!
Tried it already with my SM-N750L and i confirm it was working..
or if you dont have access to a kitkat rom try it with stock 4.3.
hope it help someone..
dear op, i have n750s. due to bad flashing, partitions corrupted.now i need pit file.kindly upload pit file so that i could flash my phone.i am searching for pit file for almost 3 weeks,but still could not.plz do some thing.
PLEASE
You got TUT for CWM or PHILZ?
Related
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
muxammle said:
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
Click to expand...
Click to collapse
try reinstall a stock rom, check if everythings is fine then reinstall CM9
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
muxammle said:
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
Click to expand...
Click to collapse
You should reinstall everything from the scratch mate, so revert your device at stock (using odin), then flash the correct [email protected] kernel and finally if everything is working flash cm9.
Edit: if your device is locked i think you can unlock it easily, search in the forum you can find out everything you need for this.
Sent from my GT-I9300 eating Jelly Bean
sorry mate ..
i am a complete noob, i dont know how to revert to stock rom, stock recovery and unroot my device
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Update 2: Okay now I have Installed my stock firmware and it seems to be working now.. But should I risk installing the CM9 again ?
muxammle said:
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Click to expand...
Click to collapse
- launch Odin
- load that ONE FILE on PDA section
- put your phone in download mode (volume down+home+power)
- connect the phone to computer, wait for drivers to be installed and ODIN to find your phone (you will see a message in Odin)
- click start
- don't touch the phone until it's done. It will boot alone
Also, it might be a good idea to wipe data / reset to factory before and after flash.
You could find all this info with google ....
On the topic, I have a similar issue. My phone was factory unlocked , and got locked after flashing latest stock firmware. Downgrading didn't solved anything. I am searching the forums right now, but it seems like all fixes are dated.
If anyone could point me in the right direction, it will be appreciated.
Thx
Hey rsndetre,
Thnx for the post, but sorry I already did that and it worked ..
Here are the method I used to get back my device back to normal and got my sim card working and again reinstalled cm9
1- Downloaded Toolkit from http://forum.xda-developers.com/showthread.php?t=1703488
2- Flashed Stock Boot Image
3- Flashed Stock Recovery Mode
4- Downloaded stock firmware from http://fus.nanzen.se/
5- Flashed stock firmware using Odin (your method above)
6- Rooted the device again (using odin and CF-Root-SGS3-v6.4)
7- Downloaded and placed cm9 and google apps package in SDCARD
8- Installed Rom Manager from Play Store.
9- Downloaded and Installed ClockWorkMod from rom manager and booted to recovery mode using RomManager
10- Then factory resetted, formatted the cache and installed the CM9 and GAPPS V11
Then my phone was good to go.
My phone is up and running, thanks rsndetre, Arsaw and TecQuality for your replies. I appreciate your time
Thanks
Muzammil Ahmed.
Dear experts
I tried to root my SG2 GT-I9100G but every time it fail because I can not fined the correct PDA file
my phone is (baseband version=I9100GXXLPR) (android version=4.0.3)
1) what is the correct PDA file for root?
2) can I upgrade the android with Odin and what are the correct files?
thank you:confused
emadshaaban said:
Dear experts
I tried to root my SG2 GT-I9100G but every time it fail because I can not fined the correct PDA file
my phone is (baseband version=I9100GXXLPR) (android version=4.0.3)
1) what is the correct PDA file for root?
2) can I upgrade the android with Odin and what are the correct files?
thank you:confused
Click to expand...
Click to collapse
Hi!
If you just want to root your Device try to follow These instructions:
http://forum.xda-developers.com/showthread.php?t=2065581
This link also Shows you how to get CWM (a custom recovery) on your Device. As soon you have CWM installed it is very easy to Flash custom roms (to upgrade your Android)
i tried to flash recovery on a friend's i9300 but nothing changed - still the original recovery.
its the 1st time it happens to me.... i flashed many roms on few galaxy s devices but with this i9300 its just impossible!
even from the android terminal it wont let me,
please help!!!!
Delphinus3 said:
i tried to flash recovery on a friend's i9300 but nothing changed - still the original recovery.
its the 1st time it happens to me.... i flashed many roms on few galaxy s devices but with this i9300 its just impossible!
even from the android terminal it wont let me,
please help!!!!
Click to expand...
Click to collapse
How do you flash recovery? What instructions did you follow?
Here!
Follow this tutorial!..
TheMidgardWatcher said:
How do you flash recovery? What instructions did you follow?
Click to expand...
Click to collapse
ALL - via android consule, via odin, and i dont know about other method. with all other devices i had NO problem at all and i flashed many roms before. its the fors time something like that happened to me.
Try this with Odin: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.25.0-i9300.tar.md5 Put it at "PDA". What error gives you Odin ? Is the phone rooted ? Have you tried installing with CWM Manager from playStore ? Also, try TWRP Manager app, as I believe it does not require root to install the recovery. After TWRP is installed, download the CWM zip and flash it. Ypour friend is running stock ROM, right ?
If you're Rooted then download and install "ROM Manager" From Play Store and that'll guide you through installing the latest CWM for your device. This is the safest method i know.
My Galaxy S3 i9300 international version got bricked, so I find many solutions here and all was succesful when I install Galaxy S5 sensation. And now my problem is I can't install any other Roms after it, it goes aborted again and again. I used TWRP and even ODIN but nothings happen. So help me I don't know the problem is, I already downloaded two Roms, the Blekota Note 4 and Lollipop for galaxy S3 i9300 and I really want to install the Blekota but was not success at all though I followed the Instruction carefully. Solution please?
Nadzlyn said:
My Galaxy S3 i9300 international version got bricked, so I find many solutions here and all was succesful when I install Galaxy S5 sensation. And now my problem is I can't install any other Roms after it, it goes aborted again and again. I used TWRP and even ODIN but nothings happen. So help me I don't know the problem is, I already downloaded two Roms, the Blekota Note 4 and Lollipop for galaxy S3 i9300 and I really want to install the Blekota but was not success at all though I followed the Instruction carefully. Solution please?
Click to expand...
Click to collapse
hi,
Download a stock rom 4.4 or 4.3 and flash the three files with odin. In the forum you can find tuto to flash a proper base with odin. After root the rom and flash CWM with odin. Then you can flash blekota Note 4 rom with CWM.
guillaume_gs3 said:
hi,
Download a stock rom 4.4 or 4.3 and flash the three files with odin. In the forum you can find tuto to flash a proper base with odin. After root the rom and flash CWM with odin. Then you can flash blekota Note 4 rom with CWM.
Click to expand...
Click to collapse
Hi sorry to point out a couple of things but the op may get confused by your post. First thing there are no stock 4.4 roms that you can flash with Odin the highest version is 4.3. Also if the op is planning to flash a custom rom after returning to stock with Odin then he does not need to root he can just flash a custom recovery like Cwm do a full wipe then flash the custom rom. (The reason why is because root is included in all custom roms). Also the op say's Odin is not working anyway
To the op what kind of error is Odin giving you?.Also make sure you are flashing a official stock rom with Odin .tar format not a zip file.
tallman43 said:
Hi sorry to point out a couple of things but the op may get confused by your post. First thing there are no stock 4.4 roms that you can flash with Odin the highest version is 4.3. Also if the op is planning to flash a custom rom after returning to stock with Odin then he does not need to root he can just flash a custom recovery like Cwm do a full wipe then flash the custom rom. (The reason why is because root is included in all custom roms). Also the op say's Odin is not working anyway
To the op what kind of error is Odin giving you?.Also make sure you are flashing a official stock rom with Odin .tar format not a zip file.
Click to expand...
Click to collapse
Hello! Thank you for the feedback, maybe with your idea i can find a solution. I am using Odin version 1.85 and 3.09 but the process stuck on "Nand Write" which I dunno what that means. The format is .tar. I even left it for an hour or two, but nothings happen and when I tried to reinstall the S5 sensation it was successful. I also full wiped data and cache and even deleted the so called Dalvik cahe as I followed the instruction of what I read here, but that does'nt help me after all. :'(
Nadzlyn said:
Hello! Thank you for the feedback, maybe with your idea i can find a solution. I am using Odin version 1.85 and 3.09 but the process stuck on "Nand Write" which I dunno what that means. The format is .tar. I even left it for an hour or two, but nothings happen and when I tried to reinstall the S5 sensation it was successful. I also full wiped data and cache and even deleted the so called Dalvik cahe as I followed the instruction of what I read here, but that does'nt help me after all. :'(
Click to expand...
Click to collapse
You could first try a "format" of System,Data,Preload,Dalvik etc (This is not a normal wipe) try using this script the Mega wipe version >> http://forum.xda-developers.com/galaxy-s3/general/tool-mega-wipesuper-wipefactory-t1832326 << you could have residue files left behind in preload etc.When using make sure you have a rom on ext sd card to flash because this wipes your System.
If that does not work you could also try the rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << good luck.
Nadzlyn said:
My Galaxy S3 i9300 international version got bricked, so I find many solutions here and all was succesful when I install Galaxy S5 sensation. And now my problem is I can't install any other Roms after it, it goes aborted again and again. I used TWRP and even ODIN but nothings happen. So help me I don't know the problem is, I already downloaded two Roms, the Blekota Note 4 and Lollipop for galaxy S3 i9300 and I really want to install the Blekota but was not success at all though I followed the Instruction carefully. Solution please?
Click to expand...
Click to collapse
Hi
Have you the latest recovery ?
Try with an other recovery
Sent from my GT-I9300 using XDA Free mobile app
I love you Man
tallman43 said:
You could first try a "format" of System,Data,Preload,Dalvik etc (This is not a normal wipe) try using this script the Mega wipe version >> http://forum.xda-developers.com/galaxy-s3/general/tool-mega-wipesuper-wipefactory-t1832326 << you could have residue files left behind in preload etc.When using make sure you have a rom on ext sd card to flash because this wipes your System.
If that does not work you could also try the rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << good luck.
Click to expand...
Click to collapse
Thank you so much. I can now finally install any custom roms..
Hello
im trying to flash the recovery i have the galaxy s3 i9300 international actually says EU model wich means that works only with EU sim cards !! i have download the correct recovery file odin3v185 and i fallow all the steps ( installed drivers kies for windows 8.1 - usb debugging - power button + volume down for download mode and volume up button - blue on odin and its written added - and auto reboot is checked also apd select the apd and the tar file << CWM_6.0.4.7_Touch_GT-I9300 >> ) !! odin says recovery – pass green 0:05 !! but there is no recovery only the stock one in a strage way im going to the download mode again and there says 4 files downloaded … cause i tried 4 times….but no clockwordmode recovery !! i dont wanna root it just to have the recovery instead to back up my stock rom samsung's one and install the << cm-11-20141115-SNAPSHOT-M12-i9300 >> can you explain what should i do i need some help?? thank you very much !!
Imho stock kernel restores stock-recovery everytime. So you've to root. And if you do, choice TWRP-recovery. CWM is obsolete.
thank you for your replay !! so as you told me i understood that i have to root first... but i have read that instead to flash the TWRP or the CWM its not necessary to root my phone !!
So can you explain to me why it goes back to stock recovery and why its necessary to root??
and probably to give a step by step guide to fall to proceed to root cause i have read different articles and im confused now!!
thank you again!!
<<On some S3 models, there is a script that overwrites the recovery you flashed. If you get stock recovery, just simply flash recovery again using ODIN, as soon as you see “PASS!”, pull the battery before your phone reboots. Then do the buttons to get into CWM recovery and do the rest of the root instructions.
Put the battery back in and boot straight into CWM recovery, then when you reboot in CWM recovery, it will ask you to disable recovery script. Do that and you should be good to go.>>
Thank you again !! for me after that step works perfect !!
@kokos94:
...Then do the buttons to get into CWM recovery and do the rest of the root instructions.
Click to expand...
Click to collapse
Don't understand this, but practically: by interrupting reboot after flash, you got custom-recovery without rooting?
Hi yes you can install CWM without root !!! i knew it before posting here and i couldnt understood why its not working!! i dont know why i never read that note probably cause it is in a root guide!! and not mentioned in most videos!! its not important to be rooted instead to install CWM !! this step that i past in my replay its coped from galaxys3root . com But cause i am a new member i couldn't paste the link here too !! its written there as a note in frequently asked questions under steps for rooting thas why its says after that proceed with root !! As it says some galaxy s3 models have this script and thats why this step with battery should be done !!
I have to say that cm-11-20150614-NIGHTLY-i9300 has some "lags" not something to be afraid but some freezes i thing !! and as a user with stock samsung's 4.3 android now the last hours i have nothing missed from that its complete!! i just thing to install cm-11-20141115-SNAPSHOT-M12-i9300 just to be more stable !!