Ok, so I tried looking for my answer all over this forum, and unless i missed it,i can't seem to find my answer ..figured i'd ask.
So i have the VRAMC3 version running 4.4.2 rom but my radios are only 3G.. i looked and i guess i need a different radio to flash (nd7?), my question is that if i have to flash another firmware or can i just stay on C3 and flash the updated radios?.
i've looked for the radios but is there a zip or a way to flash just the radios themselves or do i have to go about it a different way?.
Grandroidster said:
Ok, so I tried looking for my answer all over this forum, and unless i missed it,i can't seem to find my answer ..figured i'd ask.
So i have the VRAMC3 version running 4.4.2 rom but my radios are only 3G.. i looked and i guess i need a different radio to flash (nd7?), my question is that if i have to flash another firmware or can i just stay on C3 and flash the updated radios?.
i've looked for the radios but is there a zip or a way to flash just the radios themselves or do i have to go about it a different way?.
Click to expand...
Click to collapse
There is.. Look under my profile. Thread ND7 stock should have a link for the ND7 4.4.2 radio. Just flash in recovery..Make sure your not getting 4G bc you are in a remote area as well.. You shouldnt be only on 3G just bc the radio is different. Also you may want to look under mobile networks and make sure you are on CDMA/LTE/Evo
lacoursiere18 said:
There is.. Look under my profile. Thread ND7 stock should have a link for the ND7 4.4.2 radio. Just flash in recovery..Make sure your not getting 4G bc you are in a remote area as well.. You shouldnt be only on 3G just bc the radio is different. Also you may want to look under mobile networks and make sure you are on CDMA/LTE/Evo
Click to expand...
Click to collapse
Thanks for the reply and help.. But unfortunately i'm still stuck on 3G signal.. I've tried numerous "preferred network types" to see if any of them would work.. So far the only ones that did seem to say "LTE", also disabled my calling abilities.. I could not call or receive calls, except for on the CDMA/LTE/EV-DO network, but yea, it's stuck on 3G.. i even tried the ND7 radio along with a couple ROMs as well to see if that would clear up my problem.. But unfortunately still here..
Do you think that i need to flash a newer Firmware?..
Grandroidster said:
Thanks for the reply and help.. But unfortunately i'm still stuck on 3G signal.. I've tried numerous "preferred network types" to see if any of them would work.. So far the only ones that did seem to say "LTE", also disabled my calling abilities.. I could not call or receive calls, except for on the CDMA/LTE/EV-DO network, but yea, it's stuck on 3G.. i even tried the ND7 radio along with a couple ROMs as well to see if that would clear up my problem.. But unfortunately still here..
Do you think that i need to flash a newer Firmware?..
Click to expand...
Click to collapse
Then I would suggest flashing the stock recovery in Odin and doing a factory reset. Then re flash philz or twrp in Odin. You can check out the data corrupt in the General Section..It's stickied..
I am currently on Alliance rom 30 with mj9 radio and want to upgrade to the nd7 radio. I downloaded nd7 radio and placed on external SD. Do I just flash in philz and good to go? Or is there any else that should be done first?
Ro6i3 said:
I am currently on Alliance rom 30 with mj9 radio and want to upgrade to the nd7 radio. I downloaded nd7 radio and placed on external SD. Do I just flash in philz and good to go? Or is there any else that should be done first?
Click to expand...
Click to collapse
Here's an older post with instructions on how to flash a new modem/radio zip in custom recovery: http://forum.xda-developers.com/showthread.php?p=43217826&highlight=install#post43217826
I just installed Alliance 4.4.2 build 30 this morning and it's been working flawless for me with the MJ9 radio, so I'm just sticking with that for now.
mattnmag said:
Here's an older post with instructions on how to flash a new modem/radio zip in custom recovery: http://forum.xda-developers.com/showthread.php?p=43217826&highlight=install#post43217826
I just installed Alliance 4.4.2 build 30 this morning and it's been working flawless for me with the MJ9 radio, so I'm just sticking with that for now.
Click to expand...
Click to collapse
Does the air command work on the Alliance 4.4.2 ??
---------- Post added at 01:51 PM ---------- Previous post was at 01:47 PM ----------
yazalsaidi said:
Does the air command work on the Alliance 4.4.2 ??
Click to expand...
Click to collapse
Duuh, I should have searched the Q&A section in the Alliance thread before asking this question ... Meanwhile, i would be grateful if you do respond here .. Thanks. :good:
yazalsaidi said:
Does the air command work on the Alliance 4.4.2 ??
---------- Post added at 01:51 PM ---------- Previous post was at 01:47 PM ----------
Duuh, I should have searched the Q&A section in the Alliance thread before asking this question ... Meanwhile, i would be grateful if you do respond here .. Thanks. :good:
Click to expand...
Click to collapse
Sorry, but I'm not sure if Air Command worked or not. I never tried it. I'm not using my Note 2 any longer either as I've purchased a Note 3.
Related
Well, I may be in a pickle. I flashed what appeared to be the CDMA version of Disarmed Toaster 0.6 or whatever it was. It didn't boot, so I went to my backup. My phone won't pick up signal anymore, and what's worse, it would appear that WiFi doesn't work either. I've gone to backups from January, done a full wipe and reflash of my daily, and it hasn't fixed the problem.
What the hell do I do now? Anybody have this happen and fix it?
Try flashing firmware? Also, did you just try restoring from a nandroid or did you try flashing the actual rom?
Sent from my PG86100 using Tapatalk 2
Cetus Corr said:
Try flashing firmware? Also, did you just try restoring from a nandroid or did you try flashing the actual rom?
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
I've tried updating radios. I'm doing an RUU as a last ditch now. I did both the restore and a flash.
EDIT: Full RUU did nothing.
So no signal or wifi? Does 4G work?
I really don't feel like a rom would bork radios, that's quite strange.
Cynovae said:
So no signal or wifi? Does 4G work?
I really don't feel like a rom would bork radios, that's quite strange.
Click to expand...
Click to collapse
Wifi works. I guess the restaurant I was at when it happened had weird things going on with theirs (couldn't connect). 4G, 3G, and 1X voice all do not work. *2 for Sprint doesn't work. The phone has completely forgotten how to do the whole phone thing. I bought an LTE off eBay, but it won't be here for a week and a half, so I'd still like to get this one working.
I feel the same way as you. Unless there was something deadly hidden in it (which I doubt. It's Agrabren.) I don't see it happening. I'm wondering if it could actually be a remnant of the VM firmware that finally showed up. I honestly don't know.
i have the same problem from a flash i did about 2 days ago when i flashed
[28/10/12][JB 4.1.2]ParanoidAndroid 2.50 when the phone booted up there was no signal and i've tried everything ruu nandroids everything any help ?????
i was s-off h-boot 1.40
it seems like no devs ever touch on this subject and these Q&A just slip away never being answered and yes a rom can wipe out radio and what not or i would not be on here asking for help.
I was on 3drp with no problem just wanted to check out the rom and wham no radio ever since.
any help would be awesome
thanks!!!
Have you tried making the phone go through hands free activation again? I've not heard of this issue from anyone else using these ROMs.
I had the same issue with a sense 4 rom. I did a ##786# and thzt did it
Do a ##clear# and that should reset everything. Then do an update from the about phone screen in settings.
Cynovae said:
So no signal or wifi? Does 4G work?
I really don't feel like a rom would bork radios, that's quite strange.
Click to expand...
Click to collapse
well i flashed PARINOIDANDROID and my radio is gone as well
i think it a cm thing because that's what they are based off of
---------- Post added at 04:01 PM ---------- Previous post was at 03:58 PM ----------
Roxxas049 said:
Do a ##clear# and that should reset everything. Then do an update from the about phone screen in settings.
Click to expand...
Click to collapse
the phone wiil not communicate with the radio i get a response saying
RADIO: NO RESPONSE CAN NOT ENTER LOW POWER MODE
jjrizzelcincy said:
well i flashed PARINOIDANDROID and my radio is gone as well
i think it a cm thing because that's what they are based off of
---------- Post added at 04:01 PM ---------- Previous post was at 03:58 PM ----------
the phone wiil not communicate with the radio i get a response saying
RADIO: NO RESPONSE CAN NOT ENTER LOW POWER MODE
Click to expand...
Click to collapse
Now I am afraid to install Jelly Bean base roms. I will stick to good old Ice Cream Sandwich.
Somehow, 4g doesn't work for me on AOSP roms. It says connected, but no internet on both mui and cm10. Flashed meanrom and it worked. No idea what is going on haha
jacekbb said:
Now I am afraid to install Jelly Bean base roms. I will stick to good old Ice Cream Sandwich.
Click to expand...
Click to collapse
These 2 guys are the first I've heard from thousands of installations of Jb based roms. I know for a fact that jjriz had flashed freeza's vm leak prior to flashing the PA rom, those may be linked somehow but we don't know how or why this has happened.
Roxxas049 said:
These 2 guys are the first I've heard from thousands of installations of Jb based roms. I know for a fact that jjriz had flashed freeza's vm leak prior to flashing the PA rom, those may be linked somehow but we don't know how or why this has happened.
Click to expand...
Click to collapse
yes i did ,but iv'e done the downgrade and my device never said
baseband x.x.x.xx v
or baseband v x.x.x.x
like the other people were having
and a lot of other people flashed that firmware and i mean a lot of people
and they dont seem to be having any issue so i dont know what the heck is going on but i dont like it lol
Hey there all.
I flashed the JB update that SLJB posted the other day and the radio that went along with it.
Everything working great and running well but I wanted to go back to my stock for a few days and see how it felt. Just to compare, since I've been running SnowJB 1.1 for a while and forgot what stock was like.
So restoring the backup worked fine, everything boots and works but Wifi. It shows the networks in my hood but will not connect with any of them. Cell Data seemed flakey too, play store couldnt find a way to connect.
First thought is the Radio I flashed for JB doesn't play well with ICS.
I was so excited for official JB I didn't think to back it up before flashing. DOH!
I have been pouring through searches and found a lot of radio talk in the N4 thread, but im not sure about flashing those on the OG. Having trouble finding the stock LGOG radio.
I hate to ask, I usually find stuff by searching, but my eyes are starting to cross... :cyclops:
Anyone know where I can find the stock radio?
The JB radio is at the link below, I've yet to see a flashable radio from the ICS releases.
http://forum.xda-developers.com/showthread.php?t=2220048
I've had a similar problem since updating to JB, where I can connect to Wifi networks with no hassle, but there's no internet access. Is that the same problem you're having? Flashing the radio didn't fix my problem, but it might fix yours if you can't connect at all.
If anybody else is out there, I'd like to hear how my Wifi might be fixed as well
boxfan said:
The JB radio is at the link below, I've yet to see a flashable radio from the ICS releases.
http://forum.xda-developers.com/showthread.php?t=2220048
I've had a similar problem since updating to JB, where I can connect to Wifi networks with no hassle, but there's no internet access. Is that the same problem you're having? Flashing the radio didn't fix my problem, but it might fix yours if you can't connect at all.
If anybody else is out there, I'd like to hear how my Wifi might be fixed as well
Click to expand...
Click to collapse
That's the radio I am currently using. Wifi and everything works fine in JB, but ICS not so much, so it seems...
Yeah, still been searching but not coming up with an ICS radio... It's gotta be out there somewhere.
Does LGNPST restore the original radio? If I use the stock tot...
Why did you even go back to ICS?
I'd just recommend doing the LGNPST to 20j/JB OTA.
I've got the stock ics radio on my home pc somewhere. If someone hasn't linked it by tomorrow evening when I get home then I'll post it for you.
Sent via LG E970 SlickROM v6
stock at&t ics radio http://d-h.st/M9A or you can try this one 0.33 radio from nexus http://d-h.st/hlR
Sent from my LG-E970 using xda app-developers app
spiderkr said:
stock at&t ics radio http://d-h.st/M9A or you can try this one 0.33 radio from nexus http://d-h.st/hlR
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Awesome! Thanks for the link.
I'll try it tonight when I get off work.
I had found the thread with the .33, just was not 100% sure it would work with the OG.
I am also experiencing the same problem with my unit. I have tried different ROMS already.. i will try the radio
---------- Post added at 08:03 PM ---------- Previous post was at 07:27 PM ----------
Zen-Dragon said:
Awesome! Thanks for the link.
I'll try it tonight when I get off work.
I had found the thread with the .33, just was not 100% sure it would work with the OG.
Click to expand...
Click to collapse
i have tried both radio.. no go
spiderkr said:
stock at&t ics radio http://d-h.st/M9A or you can try this one 0.33 radio from nexus http://d-h.st/hlR
Click to expand...
Click to collapse
You ROCK my friend! Thanks for the link.
marvinmartinez888 said:
---------- Post added at 08:03 PM ---------- Previous post was at 07:27 PM ----------
i have tried both radio.. no go
Click to expand...
Click to collapse
Stock ICS modem (the first one he linked) worked like a charm.
I restored my backup of the Stock 10o ROM that I have on my SD. Let it boot, once it was up I could see WiFi networks but not connect, and data wouldn't connect.
Back to CWR I went, flashed the zip he linked. Rebooted and WiFi and Data connections are working, I can get connected and download.
And of course, now software update wants me to update. LoL :laugh:
OMGMatrix said:
Why did you even go back to ICS?
Click to expand...
Click to collapse
Simple... I'm a flash'oholic!
glad that those links helped you
Sent from my LG-E970 using xda app-developers app
hi Zen-Dragon,
Would you be able to provide the link for the ROM you have used? i would really appreciate it..
marvinmartinez888 said:
hi Zen-Dragon,
Would you be able to provide the link for the ROM you have used? i would really appreciate it..
Click to expand...
Click to collapse
The rom was my original backup from CWR that I made right after I rooted and unlocked. I didnt download it from anywhere.
oh, is it possible to you can upload your copy? or recommend something similar so i can my phone as well.i wold really appreciate it.
see this is odd. I LGNPST'd the JB bin so I could use the CM and AOPK ROMs, but when i switched back to the stock j ROM snowleopard had
my wifi doesn't work. It will see the connections, but will not connect. Tethering will start and immediately shut down.
However on all of the other ROMS (which require the jb bin) wifi works fine.
Anyone have a clue as to why? As nice as the other ROMs are, I don't like not having the LG specific features (eco-mode, wise face detection, etc.)
Thanks a ton!
2d
2disbetter said:
see this is odd. I LGNPST'd the JB bin so I could use the CM and AOPK ROMs, but when i switched back to the stock j ROM snowleopard had
my wifi doesn't work. It will see the connections, but will not connect. Tethering will start and immediately shut down.
However on all of the other ROMS (which require the jb bin) wifi works fine.
Anyone have a clue as to why? As nice as the other ROMs are, I don't like not having the LG specific features (eco-mode, wise face detection, etc.)
Thanks a ton!
2d
Click to expand...
Click to collapse
You need the JB radio to work with the Stock/Custom JB ROMS.
You need the original ICS radio to work with the older ROMS.
Hi folks. I have a USCellular Tab 10.1 LTE (which identifies itself as a p4vzw and should work fine with VZW ROMs)
Per the instructions in this XDA message posting I have installed CM10.1 + GAPPS
The message says I need to flash this kernel here. How do I do that? The webpage linked shows the source code, but I'm lost with what to do!
I have -no- LTE/CDMA radio and have a message which shows "unknown baseband" - again, supposedly the
I originally flashed from the FB01 firmware which is supposedly what I am supposed to use - thus, the Verizon baseband SHOULD allow me to connect.
Any thoughts?
I need to:
Get help to flash that kernel
get help getting the radio working
(My original baseband information was as follows: CDMA i905.03 V.FB04 //////// LTE: SCH-i905.FB01
Not sure about the radio, but you don't have to flash that kernel. It is already packed into the ROM.
Sent from my GT-P7500 using Tapatalk
Gotchya, Thanks!
I don't know why that was mentioned in the step outlined above.
However, the radio part is the most confusing to me at the moment :-/
eushaun99 said:
Not sure about the radio, but you don't have to flash that kernel. It is already packed into the ROM.
Sent from my GT-P7500 using Tapatalk
Click to expand...
Click to collapse
As I recall, you first have to be on ICS and it's radios before flashing CM. I would recommend first flashing ICS for VZW then install CM 10.1
Sent from my SM-N900V using XDA Premium 4 mobile app
I seem to be having trouble finding a Stock VZW flashable ROM. There is an update.zip which should run in the stock recovery, but I think I will need Odin or a CWM flashable ICS build.
Any thoughts?
Sent from my RM-917_nam_usa_100 using XDA Windows Phone 7 App
hilga007 said:
I seem to be having trouble finding a Stock VZW flashable ROM. There is an update.zip which should run in the stock recovery, but I think I will need Odin or a CWM flashable ICS build.
Any thoughts?
Sent from my RM-917_nam_usa_100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
www.sammobile.com
But I'm not sure if they have the stock ROM for p4vzw...
Sent from my GT-P7500 using Tapatalk
eushaun99 said:
www.sammobile.com
But I'm not sure if they have the stock ROM for p4vzw...
Sent from my GT-P7500 using Tapatalk
Click to expand...
Click to collapse
Its been awhile since I've been fiddling with my tab... Didn't find the stock files there.... Any ideas?
hilga007 said:
Its been awhile since I've been fiddling with my tab... Didn't find the stock files there.... Any ideas?
Click to expand...
Click to collapse
Any fix to this yet? I will never use my tab on a network, just want a better running rom and cant seem to find anything that works. Tried pershoots kernel but it just gets stuck at the samsung screen for more than 45 mins until i just hard reset and nand back to stock. I got this tsb for free, its just very laggy. Thanks for your time guys
Edit: basically i just want to verify that CM can and is working on this specific us cellular device.
stock rom
hawaiianwarrior808 said:
Any fix to this yet? I will never use my tab on a network, just want a better running rom and cant seem to find anything that works. Tried pershoots kernel but it just gets stuck at the samsung screen for more than 45 mins until i just hard reset and nand back to stock. I got this tsb for free, its just very laggy. Thanks for your time guys
Edit: basically i just want to verify that CM can and is working on this specific us cellular device.
Click to expand...
Click to collapse
I have a couple stock roms for this device if you need them file:///media/joe/data/cm11/device/samsung/p4vzw
file:///media/joe/data/cm11/device/samsung/p4vzw/PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708%20(2)%20Stock%20firmware%203.1.zip
---------- Post added at 06:49 PM ---------- Previous post was at 06:42 PM ----------
joestark1981 said:
I have a couple stock roms for this device if you need them file:///media/joe/data/cm11/device/samsung/p4vzw
file:///media/joe/data/cm11/device/samsung/p4vzw/PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708%20(2)%20Stock%20firmware%203.1.zip
Click to expand...
Click to collapse
PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708 Stock firmware 3.1.tar
i think its honeycomb
well my zip or tar file is not loading it keeps erroring, the file name is listed above might be able to google it or i can maybe send it via dropbox or something if you guys need it
---------- Post added at 06:54 PM ---------- Previous post was at 06:49 PM ----------
hawaiianwarrior808 said:
Any fix to this yet? I will never use my tab on a network, just want a better running rom and cant seem to find anything that works. Tried pershoots kernel but it just gets stuck at the samsung screen for more than 45 mins until i just hard reset and nand back to stock. I got this tsb for free, its just very laggy. Thanks for your time guys
Edit: basically i just want to verify that CM can and is working on this specific us cellular device.
Click to expand...
Click to collapse
CM should work (cellular data) and the rom i use on mine, i am currently using it as wifi only, i use cm10.1 it runs really smooth and it allows a stable overclock which makes it run much faster, there are a ton of tweaks you can set another tip is to turn the window animation scale .5 as well as the other two transition and animator. If you need any help flashing shoot me a pm and i can walk you through
I do not own this phone.
This thread will provide custom recovery ( CWM/TWRP ) flashable zip files of the stock frmware without knox software. This way you need not upgrade using OTA and hence will be able to move between stock and custom firmware if need to.
If you use OTA to upgrade to the latest firmware, your bootloader will be upgraded to facilitate knox. Once updated there is no going back. The roms in this thread will help you overcome this issue.
The only prerequisite is that you are not already running a knox enabled bootloader. You can find this out by going into download mode and checking if knox entries are shown in bootloader screen.
You will have the following advantages.
Bootloader is not touched, hence any compatible rom can be flashed, including custom roms
Only Samsung knox files are removed
Root & Busybox
Stock kernel
Deodexed
Zipaligned
Procedure
Download the Odin version of Philz recovery or my custom twrp recovery and flash.
Reboot to recovery first else custom recovery will be replaced by stock recovery.
Flash the ROM zip file
Reboot and Njoy...
As an additional step, you can flash the modem that comes with the ROM. The procedure to flash the modem is given below.
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Downloads
All files can be downloaded from my Mega folder. Choose the mega link and select SPH-L600 STOCK FIRMWARE folder. MD5 hash values are available in a separate file inside the folder.
Credits
@dsixda for creating android kitchen which makes it so easy to create a stock rom in zip format. I modified the kitchen to make it compatible with the Mega...
@MikeyMike for testing the build....
Reserved, just in case
This one too...
Last one..
Silesh.Nair said:
Last one..
Click to expand...
Click to collapse
Confirmed everything works great. Battery is great and have not had any issues at all.
No WIFI
MikeyLee said:
Confirmed everything works great. Battery is great and have not had any issues at all.
Click to expand...
Click to collapse
for some reason my wifi has stopped working, whenever I try to turn it on , it immediately goes back off. Any suggestions?
Happened to me first time around after I had flashed the modem. I wasnt able to get the rom to flash in stock recovery. Once I flashed Philz recovery then the deodex rom all was good to go
Sent from my SPH-L600 using Tapatalk
MikeyLee said:
Happened to me first time around after I had flashed the modem. I wasnt able to get the rom to flash in stock recovery. Once I flashed Philz recovery then the deodex rom all was good to go
Sent from my SPH-L600 using Tapatalk
Click to expand...
Click to collapse
can you give me the link , or point me in the direction I should be to find that?
---------- Post added at 01:07 PM ---------- Previous post was at 01:03 PM ----------
I'm using TWRP btw
DWAYN3 said:
can you give me the link , or point me in the direction I should be to find that?
---------- Post added at 01:07 PM ---------- Previous post was at 01:03 PM ----------
I'm using TWRP btw
Click to expand...
Click to collapse
The download links are here http://forum.xda-developers.com/showthread.php?t=2588661
Use the one named Galaxy Mega i9205 (meliusltexx) for Sprint I used the Odin Tar file and it worked perfectly. From there I flashed the Deodex ROM
MikeyLee said:
The download links are here http://forum.xda-developers.com/showthread.php?t=2588661
Use the one named Galaxy Mega i9205 (meliusltexx) for Sprint I used the Odin Tar file and it worked perfectly. From there I flashed the Deodex ROM
Click to expand...
Click to collapse
Did this last night all went well. Grabbed the Philz and then flashed the stock rom, but didn't flash the modem.
@Silesh.Nair Thanks so much for the work and resources. Are the roms in your Mega folder compatible with this device? So very grateful that some development is finally occurring for the Sprint variant.
Carl
Most of them work, but you need to make a few changes to get data/lte working....
Sent from my GT_I9205 using Tapatalk
Silesh.Nair said:
Most of them work, but you need to make a few changes to get data/lte working....
Sent from my GT_I9205 using Tapatalk
Click to expand...
Click to collapse
Does that mean changes on device(settings) or in code?
Carl
https://db.tt/OPdM7Ghs switch from wcdma to CDMA. LTE works but no phone calls or texts out.
Sent from my Nexus 5 using xda premium
Thanks @crcook60. U know the reason...
Sent from my GT_I9205 using Tapatalk
Silesh.Nair said:
Thanks @crcook60. U know the reason...
Sent from my GT_I9205 using Tapatalk
Click to expand...
Click to collapse
You're welcome, of course.
c
---------- Post added at 08:49 PM ---------- Previous post was at 08:28 PM ----------
moosiemooses said:
https://db.tt/OPdM7Ghs switch from wcdma to CDMA. LTE works but no phone calls or texts out.
Sent from my Nexus 5 using xda premium
Click to expand...
Click to collapse
Interesting. Kind of need to do outbound calls and texts. Ha!
c
crcook60 said:
You're welcome, of course.
c
---------- Post added at 08:49 PM ---------- Previous post was at 08:28 PM ----------
Interesting. Kind of need to do outbound calls and texts. Ha!
c
Click to expand...
Click to collapse
Well now that I'm over being a wise guy, I think what I'm reading is that with this apk you can do outbound calls and texts, just not on LTE. Is that correct? And is the phone apk rom specific? Like so many others, I'm guessing, I'm really itching to ditch the Sprint stock rom. But wait... just this second for the umpteenth time my phone is telling me that I have left the network with roaming turned off (sitting in my living room, smack dab in the middle of an LTE coverage area.) This is killing me!! Haha!!
Carl
You shouldn't have this problem on a stock ROM. I suggest you flash the modem that came with the ROM. Its available as a separate Odin flashable tar file.
Sent from my GT_I9205 using Tapatalk
Silesh.Nair said:
You shouldn't have this problem on a stock ROM. I suggest you flash the modem that came with the ROM. Its available as a separate Odin flashable tar file.
Sent from my GT_I9205 using Tapatalk
Click to expand...
Click to collapse
Yeah that's what I think. I downloaded it the other day so I'll do that this morning. As an aside, I really need to dig in and learn how to do this (cook/build,) but I'm a school teacher with almost no time to devote to my own education in this regard. I have been looking around at some of the guides but there is some much information that I'm not really sure where to start (suggestions?). I tend to be a bit obsessive/compulsive when it comes to technology, so much so that my friends and family often start to wonder "what happened to me." I imagine others can relate. On spring break this week; time to play.
Thank you.
Carl
You'll learn with time. Let me know if you need any help. It feels gud teaching a teacher, lol!!!
Sent from my GT_I9205 using Tapatalk
Silesh.Nair said:
You'll learn with time. Let me know if you need any help. It feels gud teaching a teacher, lol!!!
Sent from my GT_I9205 using Tapatalk
Click to expand...
Click to collapse
Very funny, Mr.Nair. And I'm an English teacher to boot! I would relish having someone with experience to mentor me. Just to show you how much teachers look forward to their breaks(read mental exhaustion,) I discovered today that after flashing a custom recovery and rooting this little Sprint demon the other day, I had NOT flashed the firmware you uploaded. Can't believe I didn't do that. This came to light after I flashed the CM ROM for I9205 (I know, NOT recommended, but I did it for kicks.) Your CM build installed beautifully, and I was able to connect to WiFi, but of course I didn't have a cell data connection. I flashed the L600 modem in Odin a couple times on top of CM and applied various settings using the phone apk moosiemooses linked and eventually did get a mobile data connection, but I couldn't make it persistent. I wound up restoring the nandroid I made the other day; this is when I discovered that I hadn't flashed the firmware version in your Mega folder. So I did that after lunch today, flashed the modem twice and after a bit of fiddling all seems to be working well. I'm fairly new to this carrier and the network seems a bit finicky, but that's just my opinion. I spent most of the day doing this, and I think I learned something in the process, just not clear about what that is exactly.<g>
Thanks.
Carl
So I went ahead and risk to flash this rom. The developer said it support all note 3 models.
It is a S5/ note 4 rom. I like it. Using it as driver until jasmine updates to 2.5.
Anyways there some things of the note 4 s note that I can't use because of Knox. Here is the rom and some screen shots from me. By the way I have t-mobile service. http://forum.xda-developers.com/galaxy-note-3/development/rom-t2891226
Thanks. I might give this a shot myself
?Galaxy ?Note 3?
I tried to install this on ROM slot 1 to give it a try, but it wouldn't boot. How did you install this?
I tried it on stock slot and it booted but no 4glte and lotsa bugs. . Sticking to JasmineROM 2.4.1
?Galaxy ?Note 3?
Yeah flashing a rom on slot 1 doesnt seem to work. I get lte on tmobile service. But the only bug I found was the after a reboot I loose cell connection and cant get it back.... But I'm testing roms from other variants without a kernel and so far im getting them working. We do have the same motherboard so there shouldn't be a problem on porting these roms. As of right now im porting hyperdrive from tmobile variant since its more updated than ours. Once I get it all working fine. I'll ask the developer if he let me take the porting of that here since he doesnt have a verizon note 3. Me and a friend also trying to port the sprint rom 4.4.4
What I really really really want is the liquidsmooth rom for retail edition. . Why won't they just unlock the bootloader already lol ?
do you guys know if their will be any lollipop ROMs for the Verizon Note 3? (non-dev)
Flashed on slot 1. Was pretty smooth for me, but no SMS/4g obviously. I'll try flashing NC4 radios to see if that does anything. Thanks for the find!
Sent from my SM-N900V
that's great.but I can't download on my phone.can you give me download link?
hr222 said:
that's great.but I can't download on my phone.can you give me download link?
Click to expand...
Click to collapse
Why can't you download?
gypsy214 said:
Why can't you download?
Click to expand...
Click to collapse
I don't know.Im in China.I think the china net can't allow my phone to download this rom.
Parker Iverson said:
Flashed on slot 1. Was pretty smooth for me, but no SMS/4g obviously. I'll try flashing NC4 radios to see if that does anything. Thanks for the find!
Sent from my SM-N900V
Click to expand...
Click to collapse
You might need to update you apn for Verizon or what ever your carrier is.
Sheradrax said:
You might need to update you apn for Verizon or what ever your carrier is.
Click to expand...
Click to collapse
am installed few weeks ago using Safestrap 3.75 , and Flash Kernel is working with Kernel NC2,NC4, kk, but everything work minus send SMS ,you have setup APN actually my Data work LTE i have N900V so i dont know yet why i cant send SMS from Hangout i use Whatsapp for now working perfect
I tried looking to change apn, but only gave me a choice of home or automatic . Didn't let me choose an apn
mjh68 said:
I tried looking to change apn, but only gave me a choice of home or automatic . Didn't let me choose an apn
Click to expand...
Click to collapse
try again delete dalvik , cache , system , factory reset and you able to setup APN try use Kernel NC2
jmontalvo248 said:
try again delete dalvik , cache , system , factory reset and you able to setup APN try use Kernel NC2
Click to expand...
Click to collapse
Thanks ,; I will try it again after work. I am using kernel NC2. I am also going to try unmodded version. First I tried v10 modded.
Can anyone link to a working kernel for this rom? Nc2 or nc4 flashable zip if available. Thanks. Found only odin versions
mjh68 said:
Thanks ,; I will try it again after work. I am using kernel NC2. I am also going to try unmodded version. First I tried v10 modded.
Click to expand...
Click to collapse
Still don't have an option to change the Apn . Frustrating because seems like a good rom to try out[emoji20]
raveniselizabeth said:
What I really really really want is the liquidsmooth rom for retail edition. . Why won't they just unlock the bootloader already lol ?
Click to expand...
Click to collapse
If it's such an easy task why don't you unlock the bootloader? If you really really really want liquid smooth, perhaps make a more informed purchase next time and buy a dev unit or a phone whose manufacturer supports unlocking like HTC or Motorola.
---------- Post added at 10:51 AM ---------- Previous post was at 10:50 AM ----------
mjh68 said:
Still don't have an option to change the Apn . Frustrating because seems like a good rom to try out[emoji20]
Click to expand...
Click to collapse
You can access the apns by using voice dialer and saying APN or use *#*#4636#*#* :thumbup:
21031980 said:
Can anyone link to a working kernel for this rom? Nc2 or nc4 flashable zip if available. Thanks. Found only odin versions
Click to expand...
Click to collapse
With a locked bootloader you will not find a flashable kernel. You can only odin flash it.