Hi guys,
first of all, i say that my main phone is a mako n4, and this Ace-i is just the one for full modding and rom testing.
I've not been able to install any rom, since when i tried to put the cm11-240714 on. Now for every rom i attempt to put on, wiping data cache, formats etc. the result is always the same:
Finding update package
Installing update package
[some errors information]
(Error 7)
Installation Aborted
How is this possible!? Ive been installing roms and tweaks for about 6-7-8 months, and now i cant install any more rom. Either a stock based rom, or a Kustom kernel based rom or a cyanogenmod 7.2/9/11 based rom
GibboAce said:
Hi guys,
first of all, i say that my main phone is a mako n4, and this Ace-i is just the one for full modding and rom testing.
I've not been able to install any rom, since when i tried to put the cm11-240714 on. Now for every rom i attempt to put on, wiping data cache, formats etc. the result is always the same:
Finding update package
Installing update package
[some errors information]
(Error 7)
Installation Aborted
How is this possible!? Ive been installing roms and tweaks for about 6-7-8 months, and now i cant install any more rom. Either a stock based rom, or a Kustom kernel based rom or a cyanogenmod 7.2/9/11 based rom
Click to expand...
Click to collapse
Follow the instructions from here to install CM11 OTA build dated 23/07/2014 or later (All credits to @lesikvip). You will need the MTD based recovery to install the CM11 from now on and also only MTD compatible roms can be installed from it (meaning if you want to move back to CM7, 9, 11, then you need to wait for the MTD version of such roms to be available). Do post the result. Hope I Helped
mahithm said:
Follow the instructions from here to install CM11 OTA build dated 23/07/2014 or later (All credits to @lesikvip). You will need the MTD based recovery to install the CM11 from now on and also only MTD compatible roms can be installed from it (meaning if you want to move back to CM7, 9, 11, then you need to wait for the MTD version of such roms to be available). Do post the result. Hope I Helped
Click to expand...
Click to collapse
when i installl the rom should i make sure i have mounted something? system,data or cache?
GibboAce said:
when i installl the rom should i make sure i have mounted something? system,data or cache?
Click to expand...
Click to collapse
As per the instructions, you needn't mount anything as such.
I did it i installed that ROM?????
Inviato dal mio Fantastico Nexus 4 con Tapatalk 4
GibboAce said:
I did it i installed that ROM����������
Inviato dal mio Fantastico Nexus 4 con Tapatalk 4
Click to expand...
Click to collapse
Glad to hear you got it working buddy :good::highfive:
Related
Cyanogenmod 11 Unnofficial build based on Android 4.4 (KitKat)WORK IN PROGRESS!
This is DEVELOPMENT thread.
Discussion thread is here, any questions not releted to development will be deleted.
Download:
ROM (10.12.2013): http://d-h.st/6pF
core google apps (17.50 MB): http://d-h.st/PbA
Issue tracker
Changelog:
10.12.2023
Android 4.4.1
Sync with latest CM sources
Improvements in camera [Video preview is wrong dimension right now]
18.11.2023
Fix "move to sd" function
Fix installing application to sd
Fix google vp 8/9 media decoder
Upstream synced
17.11.2013
Video recording fixed
fixed some sd mounting errors
CM sources updated
Battery handling improved
15.11.2013
Battery level is fixed
Brightness level is fixed
CWM recovery SD mount is fixed
CM sources updated
graphical glitches are fixed
Click to expand...
Click to collapse
Known issues:
Some applications wont work
Source:
kernel:
https://github.com/CyanogenMod/android_kernel_samsung_smdk4412/tree/cm-11.0
device:
https://github.com/cyanogenmod/android_device_samsung_i9100/tree/cm-11.0
https://github.com/CyanogenMod/android_device_samsung_galaxys2-common/tree/cm-11.0
How to install:
You need CWM recovery 6.0.4.4 at least
Perform full wipe (system, data, cache)
Install ROM and GAPPS from links provided in Download section
Wipe Dalvik Cache
Reboot into system
Thanks all to helping!
Wow Wayland, nice to see you here. I've been loving your work in the Galaxy Ace days.
Downloading now, gonna test it!
KcLKcL said:
Wow Wayland, nice to see you here. I've been loving your work in the Galaxy Ace days.
Downloading now, gonna test it!
Click to expand...
Click to collapse
Will wait for ur review... a detailed one...so we finally have our first 4.4 rom...
Thanks alot @Wayland_ACE
Wow.!! KitKat for i9100.. Never expected it to release so fast..
Thanks for porting..
Will test and report..
Small note about bluetooth is added to first post
GApps for 4.4 ??
guru_iyer said:
GApps for 4.4 ??
Click to expand...
Click to collapse
I think it's possible to use last version of 4.3.0
These are the 4.4 gapps from PA team
They should work bt m nt sure
http://www.androidfilehost.com/?fid=23212708291676422
Almost 200mb
These one from the slim rom team
http://d-h.st/EIM
108mb
Does this work? Does recovery work or is it unbootable?
BTW Thank you very much for this been waiting for days!
Shillopellos9 said:
Does this work? Does recovery work or is it unbootable?
BTW Thank you very much for this benn waiting for days!
Click to expand...
Click to collapse
I'm not at home now, therefore I cant even test it I think it should, but... ))
I'm not able to install update via CWM. It gives me error (status 7)
Okay. I will test first without flashing GApps..
And then try after flashing GApps..
GREAT!! Wayland_ACE is here!!
:good:
This man is a genius!
Thanks for all your work in our old Galaxy Ace and thanks for bringing us the new kik kat to our Galaxy S2!
ALL THE BEST MATE!
Renegeits said:
I'm not able to install update via CWM. It gives me error (status 7)
Click to expand...
Click to collapse
Maybe corrupt download. Try downloading again..
downloading now
Renegeits said:
I'm not able to install update via CWM. It gives me error (status 7)
Click to expand...
Click to collapse
Make sure u are having a newer recovery version.. probably greater than 6037
If u are on a 4.1.2 rom.
I suggest first flash 4.2/4.3 then try flashing cm11
Renegeits said:
I'm not able to install update via CWM. It gives me error (status 7)
Click to expand...
Click to collapse
Format your sd, or try downloading the rom againg, maybe your download file is corrupted or your sdcard...then try it again
Anyone know what's work?
Enviado de meu GT-I9100 usando Tapatalk
Nice to see another S2 release (first exynos). Downloading right now... Thanks a bunch. :thumbup:
Slim-4.3.1|Devil|i9100¬Tapa2
It does not boot yet I hope to fix it today
Link has been updated for the Modified TWRP. Now installing 2nd rom is breeze. External SD card is now supported..Works in E-973 Canadian Edition
Yipee..
How many of you like the Stock Rom from LG? I know..It is most of you. Me too. But the fact is I am also unable to live w/o the KITKAT! This has resulted numerous times of installing roms, losing important call logs/messages, and a lot of weird things that I dislike! These days are past, and I now use MultiROM to taste every new flavour I like!! I don't have to back up and restore the factory rom now!
I am sharing it to you too. Please let me know if you encounter any bugs.
Statutory Warning: It is your phone. Do not blame me for anything. I am not responsible for any harm you do to your device.
Thanks to all who are linked with MultiROM!
Now the detailed steps:
1. Install TWRP-2.6.3.0_For_KitKat
2. Backup your rom(in my case it is the stock one) with TWRP.
3. Install Carbon Rom as the primary rom(http://forum.xda-developers.com/showpost.php?p=52327519&postcount=217) I have not tried with other roms. But this rom comes with a kernel with kexec hardboot patch.
DU also works! Thanks to @Buscador
4. Install TWRP_2.7.0_MR_geeb
5. Now Install multirom_v22_UNOFFICIAL_geeb
6. Now Install any rom you like as your secondary rom. Reboot in Recovery --> Advanced -> MultiROM to install your rom. You can also select the backup that you performed in step 2.
The updated TWRP version supports ext SDCard. That means you can select the zip from SD card. Installing secondary rom in the extSD is not supported because of the slowness. In recovery go to Mount --> check external_sd to mount the externalSD card. Can any of you let me know if usb otg works in this recovery?
Working perfectly for E-973 Canadian version. Thanks to @Aceangel21 for confirming.:good:
Report if you face any difficulties.
Hit thanks if this has helped you :good:
Multirom Uninstaller
Now uninstall Multirom at will.
Sorry guys for this late response. Was too busy to sit with these. Anyways, better late than never!
Click here to download and flash. Do report if you have issues.
Hit thanks if this has helped you :good:
gourab4u said:
Reserved for future use
Click to expand...
Click to collapse
Is it working without lag???
I am not experiencing any issues..using for a day!
Sent from my LG-E970 using XDA Premium 4 mobile app
If someone of you have tried, please post your reviews here..
I tried it and couldn't add second rom.. Quit it because don't need it on phone...
Sent from my LG-GEEB using Tapatalk
Thanks so much. Got it to work with latest Carbon and I have MIUI on as the secondary ROM. Everything looks like its working, will report if there is anything amiss.
It works. I installed PA as my internal, and used the aktest kernel in the carbon thread. Then I was able to use miui as a secondary. So far so good
Sent from my Optimus G using Tapatalk
I installed Carbon as the internal ROM and then Mokee. I can boot to the internal ROM just fine but with Mokee I just get a brief flash of light every few seconds, and it never boots.
Edit: I reinstalled Mokee using the "Don't share" option for the kernel, and it booted. I have not been using it long enough to determine if it is stable.
Buscador said:
I installed Carbon as the internal ROM and then Mokee. I can boot to the internal ROM just fine but with Mokee I just get a brief flash of light every few seconds, and it never boots.
Edit: I reinstalled Mokee using the "Don't share" option for the kernel, and it booted. I have not been using it long enough to determine if it is stable.
Click to expand...
Click to collapse
That's great. We should not be sharing kernel. You can multiboot n number of roms literally. It seems I am moving to a stable stage with this. I will also be uploading the TWRP now with working sdcard support! Enjoy!
FireFox OS boots up!
You can now try firefox OS via multirom! It boots up. Camera is not working as of now. While installing, select the option "Share Kernel" in multirom. Download the latest FFOS build from Nexus 4 forum. Change the updater script to suit with geeb.
Mahdi also works--still using Carbon as the internal ROM.
Buscador said:
Mahdi also works--still using Carbon as the internal ROM.
Click to expand...
Click to collapse
Dirty Unicorns (the version built by mathsz) works as the internal ROM, and his XenonHD build works as a secondary ROM. Presumably, Dirty Unicorns also works as a secondary ROM.
Working perfectly for LG Optimus G E-973 Canadian Edition! Thanks a lot OP!
Axxion (with a Geeb MOD kernel) also works for both the internal and external ROM.
How do you uninstall multi-ROM?
Buscador said:
Axxion (with a Geeb MOD kernel) also works for both the internal and external ROM.
How do you uninstall multi-ROM?
Click to expand...
Click to collapse
Thanks for your time testing multirom with different roms. Regarding uninstalling this one, still I have not prepared a script. Actually I am busy configuring out the stock kk rom from Korean version to our device. Whenever I get some free time I will create and upload the zip for uninstalling multirom. Once again thanks for your effort.
gourab4u said:
Thanks for your time testing multirom with different roms. Regarding uninstalling this one, still I have not prepared a script. Actually I am busy configuring out the stock kk rom from Korean version to our device. Whenever I get some free time I will create and upload the zip for uninstalling multirom. Once again thanks for your effort.
Click to expand...
Click to collapse
Glad to be of help.
gourab4u said:
Thanks for your time testing multirom with different roms. Regarding uninstalling this one, still I have not prepared a script. Actually I am busy configuring out the stock kk rom from Korean version to our device. Whenever I get some free time I will create and upload the zip for uninstalling multirom. Once again thanks for your effort.
Click to expand...
Click to collapse
Hey, the multirom_v22_UNOFFICIAL_geeb.zip link in the OP is down because of all the traffic from your KitKat ROM. Could you upload the multirom file to another site please?
EDIT - It's back up. Never mind.
emath33 said:
Hey, the multirom_v22_UNOFFICIAL_geeb.zip link in the OP is down because of all the traffic from your KitKat ROM. Could you upload the multirom file to another site please?
EDIT - It's back up. Never mind.
Click to expand...
Click to collapse
link updated
Hello! Do you want to update your build of multirom and recovery (nexus 4 already has Multirom v26 and newer recovery)?
Hello Users OnePlus2
CyanogenMod 13 Nightly Official for OnePlus2
Download:
https://download.cyanogenmod.org/?device=oneplus2
Log:
https://www.cmxlog.com/13/oneplus2
GAPPS:
www.opengapps.org
What will be the proper steps to flash this?
y7038862 said:
What will be the proper steps to flash this?
Click to expand...
Click to collapse
1. flash Switch_tOS3_H2OSMMv3.zip link to thread: http://forum.xda-developers.com/oneplus-2/general/switch-firmware-twrp-t3371583
2. Wipe System, Data, Cache and Dalvik
3. flash Official CM13
4. flash GAPPS
5. REBOOT and enjoy official cm13
Regards,
flo071
y7038862 said:
What will be the proper steps to flash this?
Click to expand...
Click to collapse
Grarak said:
For anyone who is not sure what to flash
Flash oos beta 2
Reboot to fastboot
Flash TWRP for M bootloader
WIPE
Flash CM
Flash gapps
Reboot
Click to expand...
Click to collapse
From his Twitter account (@Grarak).
did anyone try the official cyanogenmod recovery?
I tried already.running smooth n great
i keep getting error 7, and i have tried every recovery, and the switch firmware zips, even stock recovery any ideas
dnp77 said:
i keep getting error 7, and i have tried every recovery, and the switch firmware zips, even stock recovery any ideas
Click to expand...
Click to collapse
Flash oos 301 beta, factory reset, then flash cm 13 and gapps, reboot. Works great for me.
Sent from my ONE A2003 using Tapatalk
Guys plz tell me will this recovery give me otg..... ? thanks in advance
Anyone is facing issue with fingerprint unlock? I'm coming from unofficial cm13, followed all the steps and home button is working, registering fp it's ok but unlock the phone with it doesn't work..
Oh and another difference from unofficial One, can't set custom slider like all/vibrate/none, need to use a 3rd part app...
Inviato dal mio ONE A2001 utilizzando Tapatalk
Do you guys think it's stable enough for daily driver?
Thanks.
LogicalJunkie549 said:
Do you guys think it's stable enough for daily driver?
Thanks.
Click to expand...
Click to collapse
yes.... i use it since yesterday.... no bugs so far... Performance and. battery life are good :good:
Regards,
flo071
Btw , for any of you guys wondering, FP for 1Password is working for this ROM
Furthermore, FP overall is blazing fast as well
Installed it yesterday night, but had to revert to Skydragon: included root gave fc with titanium backup and missed the "service" command needed by some of my Tasker projects, but when I installed supersu got stuck at 1+ logo at boot
Inviato dal mio ONE A2003 utilizzando Tapatalk
Not working
flo071 said:
1. flash Switch_tOS3_H2OSMMv3.zip link to thread: http://forum.xda-developers.com/oneplus-2/general/switch-firmware-twrp-t3371583
2. Wipe System, Data, Cache and Dalvik
3. flash Official CM13
4. flash GAPPS
5. REBOOT and enjoy official cm13
Regards,
flo071
Click to expand...
Click to collapse
Hey tried this method but its not working.. It keeps showing Patching update unconditionally for hours. I waited for 4 hours but no progress. Please help!!! Thanks in advance!
Prashant Sakpal said:
Hey tried this method but its not working.. It keeps showing Patching update unconditionally for hours. I waited for 4 hours but no progress. Please help!!! Thanks in advance!
Click to expand...
Click to collapse
did you a fully clean flash?
Regards,
flo071
Yes.
flo071 said:
did you a fully clean flash?
Regards,
flo071
Click to expand...
Click to collapse
Yes I did clean flash.
Prashant Sakpal said:
Yes I did clean flash.
Click to expand...
Click to collapse
Try reflashing the ROM, i had no issues
Regards,
flo071
I am OS 3.02 do I need flash any firmware to get cyanogenmod
Sent from my ONE A2005 using XDA-Developers mobile app
Just flash right recovery from Graraks twitter and clean flash rom and gapps.
Its really annoying and time consuming when we have to flash KITKAT ROM over LOLLIPOP / MARSHMALLOW / NOUGAT or vice versa. Some time ago, another xda member @rahulsnair, made the small sized (~1MB) zips, after flashing which you can directly flash L/M/N ROMs over KK or KK ROMs over L/M/N. What these ZiPs contained were essentially the updated modem files from the different firmwares. Unfortunately that was for A6000 1GB RAM version only. So, I replaced the files in that zip and modified it for A6000 plus. Using these would save you from the trouble of downloading over 1GB of stock ROM and flashing it first and ofcourse will save your precious time too.
All the credits goes to @rahulsnair only. I just replaced the files.
●●●HOW TO USE●●●
1) First boot into TWRP or any other recovery you have and wipe system, data, cache, dalvik.
2) Now flash the required zip. (e.g. if you want to move from Kitkat to Lollipop or Marshmallow or Nougat, flash KK2L zip)
3) Then flash the ROM you wanted.
Click to expand...
Click to collapse
You can download the zips from the attachments.
NOTE: Its for Lenovo A6000 Plus only. For A6000 refer to this thread by rahulsnair
Click to expand...
Click to collapse
Also, please consider voting in the POLL I've added in this thread, that will help others to know if this works.
Thanks bro
I'm goin to try & report ASAP.
Nazeerchauhan said:
Thanks bro
I'm goin to try & report ASAP.
Click to expand...
Click to collapse
Yeah...please...!! I would really appreciate it.
@sasukay waw amazing,
Did. Any. Try. This ?
I wanted to roll back from stock lollipop to stock kitkat. Will it work? How to downgrade to stock kitkat from stock lollipop?
ahmadnawaz195 said:
I wanted to roll back from stock lollipop to stock kitkat. Will it work? How to downgrade to stock kitkat from stock lollipop?
Click to expand...
Click to collapse
Well, technically, the L2KK zip should work for you. First wipe system, data, dalvik, cache and then flash this zip. Later, you can flash the KK ROM.
Are you talking about stock lollipop to kitkat or cyanogen mod. Coz there is a cm file inside that zip
ahmadnawaz195 said:
Are you talking about stock lollipop to kitkat or cyanogen mod. Coz there is a cm file inside that zip
Click to expand...
Click to collapse
Yeah....that made me think too....its weird right..!!??
But, the same has earlier worked for Lenovo A6000 (check the tagged post in OP). So, I just replaced the .mbn files (of which I have no idea what they are for) with the ones from Lenovo A6000 plus. So, it should work for A6000 plus users. But, since I didn't tried that on my own, so I'm not 100% sure. Well, I'll really appreciate if you'll provide a feedback later.
And, "L" here represents all the Lollipop based ROMs (and Marshmallow too), MIUI, CM, MOKEE and others; and not just stock Lollipop.
Waiting for your feedback...
sasukay said:
Yeah....that made me think too....its weird right..!!??
But, the same has earlier worked for Lenovo A6000 (check the tagged post in OP). So, I just replaced the .mbn files (of which I have no idea what they are for) with the ones from Lenovo A6000 plus. So, it should work for A6000 plus users. But, since I didn't tried that on my own, so I'm not 100% sure. Well, I'll really appreciate if you'll provide a feedback later.
And, "L" here represents all the Lollipop based ROMs (and Marshmallow too), MIUI, CM, MOKEE and others; and not just stock Lollipop.
Waiting for your feedback...
Click to expand...
Click to collapse
IT WORKED!!!
Bro, you did it. Lots of love to you.
I have successfully flashed and booted to CM11 from RR 5.7.1 ,without any issues, with the help of this post.
Its smooth af.
shivamgupta1996 said:
IT WORKED!!!
Bro, you did it. Lots of love to you.
I have successfully flashed and booted to CM11 from RR 5.7.1 ,without any issues, with the help of this post.
Its smooth af.
Click to expand...
Click to collapse
Thanks a lot for your feedback. Have been waiting for a long time for this. Now please consider voting in the poll I've added in this post. That will help others. Thanks..
Your another zip is also working.
Good job.
Sent from my Lenovo A6000 Plus
shivamgupta1996 said:
Your another zip is also working.
Good job.
Click to expand...
Click to collapse
Thanks once again. I had doubts about its working. But, didn't had enough time to flash ROMs back and forth just to check its validity. Technically, it had to work, but still thanks for the confirmation.
its worked
its work for me, i flash cusrom RR 5.7.4 from CM11 directly with ur tool (KK2L) and amazing its succeed. thanks for the tools. :good:
Well I am on stock kit kat but I want to switch to stock lollipop can I use kk2lp zip to make it work as I have tried to directly flash it via recovery and it shows can't mount /data and update binary error zip thing so I am stuck in kit kat of the stock s17version will that work
SnakeEyesNinja said:
Well I am on stock kit kat but I want to switch to stock lollipop can I use kk2lp zip to make it work as I have tried to directly flash it via recovery and it shows can't mount /data and update binary error zip thing so I am stuck in kit kat of the stock s17version will that work
Click to expand...
Click to collapse
Yes, it will.
Sent from my Lenovo A6000 Plus
unable to boot
sasukay said:
Its really annoying and time consuming when we have to flash KITKAT ROM over LOLLIPOP / MARSHMALLOW or vice versa. Some time ago, another xda member @rahulsnair, made the small sized (~1MB) zips, after flashing which you can directly flash L/M ROMs over KK or KK ROMs over L/M. Unfortunately that was for A6000 1GB RAM version only. So, I replaced the files in that zip and modified it for A6000 plus. Using these would save you from the trouble of downloading over 1GB of stock ROM and flashing it first and ofcourse will save your precious time too.
All the credits goes to @rahulsnair only. I just replaced the files.
You can download the zips from the attachments.
Also, please consider voting in the POLL I've added in this thread, that will help others to know if this works.
Click to expand...
Click to collapse
er flashing L2kk am unable to boot.it stuk on bootlogo.unable
---------- Post added at 04:00 PM ---------- Previous post was at 03:43 PM ----------
shivamgupta1996 said:
IT WORKED!!!
Bro, you did it. Lots of love to you.
I have successfully flashed and booted to CM11 from RR 5.7.1 ,without any issues, with the help of this post.
Its smooth af.
Click to expand...
Click to collapse
After flashing L2KK unable to boot the device please help
ilam android killer said:
After flashing L2KK unable to boot the device please help
Click to expand...
Click to collapse
I've personally checked both the L2KK and KK2L zips. Both of them works.
Steps to How To Use:-
1) First wipe cache, dalvik, data, system and then flash the L2KK zip.
2) Then reboot to recovery again.
3) Now again wipe the cache, dalvik, data, system
4) Now, flash the KitKat based ROM zip of your choice.
Stock ROm
sasukay said:
I've personally checked both the L2KK and KK2L zips. Both of them works.
Steps to How To Use:-
1) First wipe cache, dalvik, data, system and then flash the L2KK zip.
2) Then reboot to recovery again.
3) Now again wipe the cache, dalvik, data, system
4) Now, flash the KitKat based ROM zip of your choice.
Click to expand...
Click to collapse
Can i flash kitkat stock rom
ilam android killer said:
Can i flash kitkat stock rom
Click to expand...
Click to collapse
Yeah you can flash any kitkat based rom (stock too) after that.
But, to flash stock, you don't actually need to flash this L2KK zip. The files in the zip are actually taken from the stock ROM only.
So, you should directly flash the stock KitKat without flashing this mod.
Hi.
Can someone port the miui 8 rom for our great device.I have use miui7 rom for a while and i totally enjoyed it.It really smooth and lagless.
Please.
Dxnxsh said:
Hi.
Can someone port the miui 8 rom for our great device.I have use miui7 rom for a while and i totally enjoyed it.It really smooth and lagless.
Please.
Click to expand...
Click to collapse
Here is Miui 8 http://redirect.viglink.com/?format...iuirom.xiaomi.com/rom/u94103...c5b045_6.0.zip at least make some research before opening a new thread.
alexischino said:
Here is Miui 8 http://redirect.viglink.com/?format...iuirom.xiaomi.com/rom/u94103...c5b045_6.0.zip at least make some research before opening a new thread.
Click to expand...
Click to collapse
Can i get the link to the thread for this rom?
Thanks..
alexischino said:
Here is Miui 8 http://redirect.viglink.com/?format...iuirom.xiaomi.com/rom/u94103...c5b045_6.0.zip at least make some research before opening a new thread.
Click to expand...
Click to collapse
Understand this is old but any one was able to flash this successfully? getting status 7 aborted some symlinks failed (philz cwm 6.48 and twrp 2.8.7) cannot find any new valid links for twrp like 3.0 (tried reboot recovery and unmount cache tricks but still get error while flashing)
-tried twrp 3.1.1, philz, twrp 2.8.6 and 7 ...same issue of status 7 symlinks...developer had newer versions on another site but cannot download (now I see in some messages in another forum that the developer stopped working on this-too bad as the KK version itself works very well)
EDIT
got the miui 8 to work (just shows no sim card but in reality detects sim card and cellular network lte works calls work)
had to unmount data and system and cache and also change the mount system and data statements in updater script
have the 6.11.26 based on 6.0.1 android on I527M