Well i had soft bricked s2 before and it was easly repeired by flashing stock rom via odin. But now its diffrent, only thing i can enter is download mode(odin mode), when i try flash stock rom odin stops on cache.img, when trying to flash cwm it stops on NAND write starts. I tried this with all odins i found, also tried diffrent roms. kernels but its same. Also if i try to flash kernel flash count gets bigger and if i try to flash tom it stays the same :/
doing 3 step flash(from odin troubleshoot ):
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
Click to expand...
Click to collapse
update: tried to flash counter reset and it seems it worked, so its not odin problem:/
Is there someone who can help me?
Oh yeah! I had the same problem with my SGS plus, everybody told me that i could only repair it with odin, but i brought my device in Samsung Assistence and they repair my device with warrantly ( i had Cwm recovery and root permissions ) so if you can bring your device in samsung assistence and say:"within i update my device at 4.1.2 jb with kies, my pc turned off" they probably will ask you ( if u dont have warrantly) max 50 $ ( in my country 25€ for update a device )
REMEMBER TOUCHWIZ IS DEAD, CYANOGENMOD IS THE FUTURE, AND THE FUTURE IS NOW
have you by any chance did a factory reset in stock 4.0.4 ? if so you might have hit the " superbrick " which kills the internal memory . then there is no internal memory to write to .
What was the last working state and what did you do that became to this ?
i had 4.4.2 omni rom after that tried factory reset :/
well my warranty is long time gone, but i have heard that samsung has given 5years warranty for all samsung mobiles or so,
Related
Big problem...
After flashing 9.3 on SGS2 without wiping i rebooted in cwm and flashed siyah 2.6.2.
After that the phone stuck on the omega logo and did not boot.
I rebooted into CWM wiped cache/davlic etc and i tryed to reflash the 9.3 and the siyah.
After that i tryed to flash the kernel but the phone restarted itself and since then it doesnt boot at all neither in CWM or into android.
Only in download mode and it's not recognized by ODIN or kies.
ODIN:
ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!
Kies: The device is not responding.
BUT windows is recognizing the phone in devices.
What should i do?
IF i try to turn it on it appears a phone-triangle-pc logo and nothing happens after that.
angelossssss said:
Big problem...
After flashing 9.3 on SGS2 without wiping i rebooted in cwm and flashed siyah 2.6.2.
After that the phone stuck on the omega logo and did not boot.
I rebooted into CWM wiped cache/davlic etc and i tryed to reflash the 9.3 and the siyah.
After that i tryed to flash the kernel but the phone restarted itself and since then it doesnt boot at all neither in CWM or into android.
Only in download mode and it's not recognized by ODIN or kies.
ODIN:
ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!
Kies: The device is not responding.
BUT windows is recognizing the phone in devices.
What should i do?
IF i try to turn it on it appears a phone-triangle-pc logo and nothing happens after that.
Click to expand...
Click to collapse
1) Get the right CF Kernel from the Chainfire kernel thread in the Android Original Development Thread. Extract the zip to get a TAR and extract the TAR to get a z-image file. Also download the corresponding original stock kernel from the Intratech thread in the same section.
2) Flash the TAR in PDA using Odin. Do not click repartition. This lets you boot with with functional Root and CWM.
3) If you want to get rid of the yellow triangle, then load the z-image file into /sdcard. Reboot into download mode and use Odin to flash the stock kernel (again in the PDA without repartition). After that, go to the CWM app, choose flash kernel and locate the zimage and proceed.
NB: You can read Chainfire and Intratechs threads in case I was vague somewhere.
Thanks mate but i already know and did all these.
The thing is what i do in order to bring my phone back to life.
What is 9.3 you flashed ???
Kies: The device is not responding.
Why are you using KIES to flash a rom is it open and preventing Odin from working .
jje
Are you saying Odin does it doesn't recognise your phone?
In the past Odin flashing has gone wrong and can usually be fixed by a PC reboot or rebooting into download mode again.
Sent from my GT-I9100
9.3 = Omega 9.3 rom.
No i'm not.
I installed kies to see if the phone is recognized. After i realized that it's not i uninstalled the kies.
The thing is that odin sees my phone but stacks at <ID:0/003> NAND Write Start!
With 115 posts no reason for you not to ask in the rom thread as its possible its rom specific .
Dont think it is but worth a try .
Choices try Odin on another PC .
Take phone to service centre and hope it is not an expensive repair .
Buy a JTag machine .
jje
Just tryed odin on another pc and i got the same result...
i had the same problem and tried flashing the PIT thinking it might do something, but ended up fully bricked. couldnt power on anymore. only way is to JTAG it now, if odin cant flash it.
read this thread maybe it can help
http://forum.xda-developers.com/showthread.php?t=1382838&highlight=unbrick
angelossssss said:
9.3 = Omega 9.3 rom.
No i'm not.
I installed kies to see if the phone is recognized. After i realized that it's not i uninstalled the kies.
The thing is that odin sees my phone but stacks at <ID:0/003> NAND Write Start!
Click to expand...
Click to collapse
Were you flashing using Odin without Kies installed? As far as i'm aware Kies must be installed but not running to flash with Odin.
Nothing worked
The phone is off to Samsung service.
Thanks for your help people.
Hi,
Yesterday I bricked my SGSII when flashing Siyahkernel (see: http://forum.xda-developers.com/showthread.php?p=25204237&posted=1#post25204237)
There are many more users who bricked their device lately using Siyahkernel SiyahKernel v3.1rc6.
The problem is: returning to the stock Samsung rom is impossible because the /data cannot be written to.
I cannot flash the rom package because at the end the installation Odin hangs when the datafs is flashed, I can wait for an hour or so, and the installationproces does not proceed.
This is what Odin reports:
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> factoryfs.img
<ID:0/003> data.img
SO, when flashing data the installation stops. Same in CWM, when flashing a rom.
PIT - PHONE -BOOTLOADER -KERNEL: they all can be flashed. It is just in the last minute that /data cannot be written to. And afterwards, the SGSII is stuck on the boot logo.
Now my question: could the internal SD-card be repartioned of be formatted? Does anyone know how? That might solve the problem.
or do I just have to jtag the device? I cannot reset the counter either, because I cannot boot the rom.
I would be willing to pay for the solution, as I think many more users would be prepaired to do. I have counted at least 10 bricked devices ON XDA developers since saturday.
you need a pit file for repartition to work.
http://dl.dropbox.com/u/19319086/u1_02_20110310_emmc_EXT4.pit
Exactly the same problem for me... I tried flashing some stock roms but the phone always hangs on data.img with 3-file-fw (+ .pit file) or stays in bootloop with 1-file-fw.
The only way to enter recovery is rogue recovery (cf-root doesn't work for me) but internal storage can't be mounted.
Is there any known solution or I'll have to send my phone to Samsung?
Try it with the original USB cable
hello,,
i have a problem with my galaxy s3 GT-I9300
the problem is that i flashed MIUI and it worked perfectly .. after that restarted my device and it repeat restarting.
so i got to recovery mode and it failed to flash any zip file. and failed to wipe to factory reset and failed to wipe data.
i was on CWM touch 5.0.5 but someone here adviced me to flash Philez Touch and after that i couldn't access recovery anymore
i tried to flash from odin a stock rom
Code:
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
and here is the result
Code:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Download screen says the following
Code:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YES (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Downloading..
this is all i have .. please help me
thanks in advance
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
sriram231092 said:
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
Click to expand...
Click to collapse
tried all ports.
killed all samsung kies processes.
the problem is that i flashed a recovery file and it works but when flashing any rom it stuck !!!
Same answer nand damaged take to a service centre .
jje
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
flashing
Code:
recovery-cwmtouch-6.0.3.2-GTI9300.tar
result to successful
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
ground-zero said:
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can you please provide me the link
thanks
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
Follow the steps in this thread.
If boots, then good, if not, then try flashing an ICS firmware. Download from Sammobile.
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
I had a similar problem with my I9305, would die at 23% of system.img. Fixed by re-flashing using Heimdall - after that, Odin also works again. Apparently a bug in Odin.
(However, in my case, the problem was not caused by repartitioning, nor did I need a PIT file to fix it.)
Sent from my GT-I9305 using xda app-developers app
eng.helewa said:
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
Click to expand...
Click to collapse
Have you flashed a firmware with single CSC, modem, code files ? When you make a repartition this is necessary. And you can try an other Odin vetsion. I use permanently 1.84 or change to Heimdall.
Hope this works !
Sent from my GT-I9300 using xda premium
Hi, could anyone tell me please what i can do with bootlooping S3? It happened on version of CM11 rom, it was workin fine until this one time i plug it to charge it and from then it is just staying on galaxy S3 logo. I can get to download mode and recovery mode but odin wont flash anything and in cwm (touch recovery 6.0.4.4) it says that it cannot mount anything and errors and partition fails.
Otamoe said:
Hi, could anyone tell me please what i can do with bootlooping S3? It happened on version of CM11 rom, it was workin fine until this one time i plug it to charge it and from then it is just staying on galaxy S3 logo. I can get to download mode and recovery mode but odin wont flash anything and in cwm (touch recovery 6.0.4.4) it says that it cannot mount anything and errors and partition fails.
Click to expand...
Click to collapse
First of all READ. As everybody is saying Ok first question, when You go download mode can you see model name - 9300GT ? If so that means everygthing is solveable.
Next you have messed something and You need to step by step check it. If You want to still work on CM11 you need to flash CF-Root-SGS3-v6.4 to make sure that on the level of recovery everything is ok.
http://forum.xda-developers.com/showpost.php?p=27049380&nocache=1&z=1947389626875519
Than try to flash again Your ROM. We will see where this will bring You.
Thx for reply. So i can see model name in download mode GT-9300 and as you said i try to flash that kernel...
odin said:
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
When I used to be having such problem I was trying to chaoticlly flash everything. Now I can say that this was stupid. Every sytuation is diffrent but some are simmiliar.
Try this topic at least You will be having stock rom with fully func. S3 If it helps you than you will go with Custom ROM otherwise>>> Root and than ROM.
http://forum.xda-developers.com/showthread.php?t=2563562
If this will not solve the problem we will see other oppurtunities.
I cannot flash anything with odin.. when i try so odin stays forever like this:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
I rooted my phone using odin3 then tryed to flash the sdk23 arm64 xposed framework using flashify
Now im stuck on the samsung word logo 'boot loop' and i don't know how to fix it:crying:
Also have a custom recovery [TWRP]
now i think i broke it :crying: i cant get into the recovery mode i dont why but i went to advance wipe and check all of it
also now doesnt do to the samsung word logo it stays on the samsung galaxy s6 powered by android screen
also when charging no green is seen just a empty battery with lighting bolt
plus KERNEL IS NOT SEANDROID ENFORCING in red in the top left corner.
Think i basicallly wiped everything ohno
I'm struggling to understand why you were using Flashify to install Xposed, especially since you have TWRP. Regardless, you have to try and get it into Download Mode. If you can, you should be able to reinstall the original firmware.
es0tericcha0s said:
I'm struggling to understand why you were using Flashify to install Xposed, especially since you have TWRP. Regardless, you have to try and get it into Download Mode. If you can, you should be able to reinstall the original firmware.
Click to expand...
Click to collapse
i am able to get to download mode (odin mode right?), now how do i reinstall the original firmware? (maybe link me some steps)
1000 tutorials here on xda or youtube.
Basic structure:
find / download firmware
boot to Download Mode
open Odin as admin
place .tar or .tar.md5 file of the firmware in AP slot if one 1 large file or if it is split into multiple ones then they will be labeled obviously for BL, AP, CP, CSC just like in Odin.
Hit start and wait for a bit. If the flash is successful but it is stuck in a boot loop, then reboot to the stock recovery and reset it.
es0tericcha0s said:
1000 tutorials here on xda or youtube.
Basic structure:
find / download firmware
boot to Download Mode
open Odin as admin
place .tar or .tar.md5 file of the firmware in AP slot if one 1 large file or if it is split into multiple ones then they will be labeled obviously for BL, AP, CP, CSC just like in Odin.
Hit start and wait for a bit. If the flash is successful but it is stuck in a boot loop, then reboot to the stock recovery and reset it.
Click to expand...
Click to collapse
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on the phone says
SECURE CHECK FAIL : (BOOTLOADER)
Looks like you're using the wrong firmware. You have to use one for your variant and you typically can't downgrade bootloaders so it's gotta be the same firmware or newer.
es0tericcha0s said:
Looks like you're using the wrong firmware. You have to use one for your variant and you typically can't downgrade bootloaders so it's gotta be the same firmware or newer.
Click to expand...
Click to collapse
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed
i used a file G920IDVU3EPEA_G920IXSA3EPEA_G920IDVU3EPEA_HOME.tar.md5
pretty sure its the right one, the sticker on the back of my phone says its SM-G920I
This fail doesnt have the SECURE CHECK FAIL : (BOOTLOADER) on the phone
Also 'An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software' appears on the phone screen
Never Mind i fixed it i just had to use a differnt cable, think my cable was broken.
Cant get into the recovery mode (hold down the volume up, home and power button at the same time) right?
did a factory reset in recovery mode still have a bootloop
never mind again just didnt have the battery to boot up sorry think its fixed how love ya
xKyono said:
never mind again just didnt have the battery to boot up sorry think its fixed how love ya
Click to expand...
Click to collapse
:good::highfive::victory: