Hello,
I have the Ulefone Be touch 3 and i want to really increase the sensitivity of the screen.
Because when i write a text message, it did not write the half of the words.
I tried the app Screen Booster but it did not work.
I see in the net that i have to root to add specifications on a file Build.prop.
But for that, i have to root.
Someone have an idea ?
I tried the root method :
-Extract RAR
-Put UPDATE-SuperSu to your phones storage
-Install drivers to PC
-Open SP Flash Tool
-Check boot and recovery and select files from files-folder (Uncheck others if they are checked)
-Push download button
-Remove battery from the phone and connect USB
-Disconnect USB when SP Flash Tool says OK
-Install battery and start phone with vol up + power
-Select install zip from sdcard and select super su
-Reboot phone and you are done
-Click thanks if you are satisfied
But I have an error :
PMT changed for the rom
I am afraid to change the download only by firmware upgrade ...
Thanks in advance for your help
Avy
Very first LK.BIN for ulefone Be Touch 3 needed
Hi,
I flashed my Ulefone Be Touch 3 device with Ulefone's ROM and ... big mistake : soft bricked.
The device still works except the screen : a dark blue one with no logo, no icon, etc.
From what I read, I can get screen back to normal with the very first lk.bin file but i can only find recent (and thus faulty) ROMs.
Could someone help me ?
Thanks in advance.
Best regards.
I just recently rooted my tablet and I decided to install a custom boot animation through my tablet, after installing it told me to reboot the tablet and I did it, in boot up screen it shows the new animation but it wont get away, it just shows the animation whole time, it appears that I cannot boot it up! What should I do?
Thanks for the assist!
Solution to solve lenono S6000 H bootloop
Hi mate l m here to help you out to retrieve your lenovo tablet you need to be patient and be determined okay try the following
1.download the lenovo S6000 h stock rom check out the exactly firmware download it
Also download the android USB vcom drivers the Sp Flash tool
2.download ultimate android tool box pro with this small utility tool you can flash the system IMG only from the stock rom you downloaded and your user data may not be disturbed
Okay find an original USB cable
Press volume up + power the tablet will boot into 3 options choose fastboot mode after that open ultimate android tool box pro navigate to were there is flash system IMG now click the option will ask you to choose the system img now locate the extracted stock rom choose the system wait for the tool to wipe partitions NOTE IF IT HANGS PRESS ESCAPE AND REDO OR REMOVE CABLE AND RE INSERT THE TABLET it takes about 30seconds to flash the LENOVO S6000 H system IMG and congrats your tablet should boot as usuall
IF YOU FAIL TRY THE FOWLLOWING
1.OPEN FLASHTOOL
2.CLICK SCATTER FILE AND SELECT THE SCATTER FILE FROM THE ROM
3.PLEASE SELECT DOWNLOAD ONLY DO NOT FORMAT
4.WITH THE TABLET SWITCHED OFF PRESS VOLUME DOWN AND INSERT CABLE WAIT FOR THE FLASHING PROCESS TO BEGIN BUT PLEASE NOT THAT YOU WILL LOSE ALL USER DATA
WAIT FOR THE FLASHING PROCESS PLEASE DO NOT UNPLUG DEVICE UNTILL BIG TICK WITH DOWNLOAD OKAY APPEARS
GOODLUCK IN UNBRICKING YOU TABLET MATE
Hello,
I try again but I will be shorter this time in the description of my problem.
Is there someone that can tell me how I can program my smarphone when SP Flash Tool display this error message: ERROR: status_brom_cmd_send_da_fail (0xC0060003) ?
See attached picture.
Thank you for your help.
I have the same issue any oNe .???
Hi , try this :
1. Unplug your device from pc
2. Open Sp Flash Tool with Administrator privileges
3. Go to Download and put scatter.txt file
4. Now go to Format and make sure that you have checked Auto Format Flash and Format whole except Bootloader , click on Start , wait few second and close Confirmation popup.
5. Now go to Download and instead of Download only do Format All + Download .
If not , try then Upgrade only or try to flash with another version of flash tool .
Good Luck
Hello,
Finally I found the way to program the smartphone.
- Turn off your mobile phone
- Press Download (SP Button) in SP Flash Tool
- Press Volume Down on the mobile phone.
- Keep Volume Down pressed and connect to the USB
- Normally SP Flash tool starts to program and you can release the Volume Down key.
Hop it will work for you.
francescofff said:
Hello,
Finally I found the way to program the smartphone.
- Turn off your mobile phone
- Press Download (SP Button) in SP Flash Tool
- Press Volume Down on the mobile phone.
- Keep Volume Down pressed and connect to the USB
- Normally SP Flash tool starts to program and you can release the Volume Down key.
Hop it will work for you.
Click to expand...
Click to collapse
didnt worked for me
maybe solution
So i had the same problem and the solution for me was to hold volume up key as i was connecting and keep pressing until the red bar is 100% then after a few seconds release it.
Apparently i cant post links but i will copy the tutorial.
With the phone off:
- Click DOWNLOAD in SP Flash Tool
- Hold VolumeUp on your phone
- Connect the phone while still holding VolumeUp
- Hold VolumeUp a couple of seconds after the red bar gets to 100%
- Release
Credit to GizBeat on chinaphonearena.
What worked for me ...
After following
https://www.getdroidtips.com/flash-stock-firmware-using-sp-flash-tool/
I got the
error status brom cmd send da fail 0xc0060003
message.
I started doing what was said by Teddy Lo, but it was not better.
I kept my current cession (SP Flash Tools 5.1752 started with administrative mode);
went into format tab, left FORMAT WHOLE EXCEPT BOOTLOADER
clicked on START, then STOP
then in download TAB
in the select menu, choose format+download
click DOWNLOAD button
... got the 0xc0060003 message ...
but ... immediately cancel this pop-up and reclick on DOWNLOAD asap. And then, flash goes fine (DA again with red bar, then, all partitions with yellow bar).
This way, I have been able to reinstall ROM v6 on Oukitel K6000 Plus.
Never had to press down or up volume during start-up; just let phone boot; or press voldown+power to stop/restart it, if it is already started somehow. My phone was in orange state, and my system was completely broken (not bootable, not usable). I only had working bootloader and recovery; I tried various other ways to install stock ROM, all failed. I had boot loops and other issues. In the end, I went back to SPFT, and just cancelling and reclicking ASAP on the DOWNLOAD button did it for me.
Now trying ROM v23 ... (will edit in 1h about it).
... happily for you, my windows crashed, and I had to restart the whole process, so now I can write down the working procedure:
- phone was up with ROM v6 working fine
- phone was plugged on USB
- previously installed VCOM
- could not install Android/Download driver
- Oukitel K6000 Plus
- SPFT 5.1752 started with admin perms
- DA already set to MTK_AllInOne_DA.bin
- scratter ... the only file available in the folder containing my new rom (official V23 from Oukitel, downloaded last year, so forgot where I took it - yes it's one year I am trying to upgrade)
- in the menu, select format all + download
- go in format TAB
- tick AUTO format
- tick FORMAT ALL except bootloader
- leave validation unticked
- click on START, wait 5s, click STOP
- back in Download tab
- click DOWNLOAD button
- press voldown+power to reboot the phone
- got the pop-up once with error 0xc0060003
- immediately cancel the pop-up and reclick DOWLOAD button
- got the pop-up a second time, cancel it a second time, click DOWNLOAD a third time
- sweat a lot ... DA again ... partitions again, yellow lines ... V23 installed \o/
Some steps may be be useless or optionnal; this was the raw log/history of what I did to work around "error status brom cmd send da fail 0xc0060003".
First boot is VERY long ...
"Download-agent" DA_PL
Hi, guys !
I faund decision for me.
- When you opened Flash Tool, next you need choose "Download-agent" DA_PL (not MTK_AllInOne_DA)
it's works for me
Thanks. It worked for me too.
bibanya said:
Hi, guys !
I faund decision for me.
- When you opened Flash Tool, next you need choose "Download-agent" DA_PL (not MTK_AllInOne_DA)
it's works for me
Click to expand...
Click to collapse
You saved me a day!
Thanks a lot :good: :victory:
YES! Thank you!
This worked for me and finally unbricked this cheap Leagoo S8 that bricked itself!
You rule.
Thanks.
francescofff said:
Hello,
Finally I found the way to program the smartphone.
- Turn off your mobile phone
- Press Download (SP Button) in SP Flash Tool
- Press Volume Down on the mobile phone.
- Keep Volume Down pressed and connect to the USB
- Normally SP Flash tool starts to program and you can release the Volume Down key.
Hop it will work for you.
Click to expand...
Click to collapse
Sp flash tool error 0xc003003
Hello I keep getting this error status da selection 0xc0030003
And I cant find any info online to fix I am trying to flash a elephone p9000 after a screen replacement
Any help or advice would be great help
Johnsarah said:
Hello I keep getting this error status da selection 0xc0030003
And I cant find any info online to fix I am trying to flash a elephone p9000 after a screen replacement
Any help or advice would be great help
Click to expand...
Click to collapse
1. There are two stock ROMs officially available for your device. Are you sure you are using the correct one?
2. Are you sure you are using a compatible download agent (DA)? If the default "MTK_AllInOneDA.bin" isn't working, check your ROM zip to see if you have anything else... Maybe DA_PL.bin, DA_SWSEC.bin or DA_SWSEC_CRYPTO20.bin might work for your device.
The error you are getting makes it clear that you are trying to use an incompatible DA.
Look into my suggestions, and if you still get the error, I'd recommend you to create a new thread, where you're more likely to get help (and sooner too).
Johnsarah said:
Hello I keep getting this error status da selection 0xc0030003
And I cant find any info online to fix I am trying to flash a elephone p9000 after a screen replacement
Any help or advice would be great help
Click to expand...
Click to collapse
Thanks I am new to android I am thinking your right I need to look close at what software it is I think iv been at it all day so I thought I would ask many thanks
check out Unlockcafe on youtube and instagram, he can fix that
doublehp said:
What worked for me ...
After following
https://www.getdroidtips.com/flash-stock-firmware-using-sp-flash-tool/
I got the
error status brom cmd send da fail 0xc0060003
message.
I started doing what was said by Teddy Lo, but it was not better.
I kept my current cession (SP Flash Tools 5.1752 started with administrative mode);
went into format tab, left FORMAT WHOLE EXCEPT BOOTLOADER
clicked on START, then STOP
then in download TAB
in the select menu, choose format+download
click DOWNLOAD button
... got the 0xc0060003 message ...
but ... immediately cancel this pop-up and reclick on DOWNLOAD asap. And then, flash goes fine (DA again with red bar, then, all partitions with yellow bar).
This way, I have been able to reinstall ROM v6 on Oukitel K6000 Plus.
Never had to press down or up volume during start-up; just let phone boot; or press voldown+power to stop/restart it, if it is already started somehow. My phone was in orange state, and my system was completely broken (not bootable, not usable). I only had working bootloader and recovery; I tried various other ways to install stock ROM, all failed. I had boot loops and other issues. In the end, I went back to SPFT, and just cancelling and reclicking ASAP on the DOWNLOAD button did it for me.
Now trying ROM v23 ... (will edit in 1h about it).
... happily for you, my windows crashed, and I had to restart the whole process, so now I can write down the working procedure:
- phone was up with ROM v6 working fine
- phone was plugged on USB
- previously installed VCOM
- could not install Android/Download driver
- Oukitel K6000 Plus
- SPFT 5.1752 started with admin perms
- DA already set to MTK_AllInOne_DA.bin
- scratter ... the only file available in the folder containing my new rom (official V23 from Oukitel, downloaded last year, so forgot where I took it - yes it's one year I am trying to upgrade)
- in the menu, select format all + download
- go in format TAB
- tick AUTO format
- tick FORMAT ALL except bootloader
- leave validation unticked
- click on START, wait 5s, click STOP
- back in Download tab
- click DOWNLOAD button
- press voldown+power to reboot the phone
- got the pop-up once with error 0xc0060003
- immediately cancel the pop-up and reclick DOWLOAD button
- got the pop-up a second time, cancel it a second time, click DOWNLOAD a third time
- sweat a lot ... DA again ... partitions again, yellow lines ... V23 installed \o/
Some steps may be be useless or optionnal; this was the raw log/history of what I did to work around "error status brom cmd send da fail 0xc0060003".
First boot is VERY long ...
Click to expand...
Click to collapse
did not work
thank you you saved me
:highfive:
bibanya said:
Hi, guys !
I faund decision for me.
- When you opened Flash Tool, next you need choose "Download-agent" DA_PL (not MTK_AllInOne_DA)
it's works for me
Click to expand...
Click to collapse
Bien bonjour, je voudrais aussi flasher un tecno camon 11 mais j'ai aussi l'erreur brom cmd send da fail 0xc0060003, svp que quelqu'un m'aide d'urgence
I still have 0xC0060003 error
Hi,
I still have 0xC0060003 error.
After the red line fills 100% it will get stuck and within 9 seconds and fails.
someone help me
my phone is HTC, MT65xx
solution 101
Hey guys, For those people out there whos' problem stays the same and the above-given solutions don't work cause I know, it doesn't work in all phones(I've tried it several times and stock on the same error). I've been researching this problem and none appears to be the solution that works. From the hints that I've gathered this solution work for me and might be for you also.
Assuming you have opened the SP flashtool and the scatter file is placed.
1. click download
2. connect your phone
3. list down all the names that caused your problem and do it several times
#for me : systeminfo, sutinfo, cda and recovery are the causes.
4. uncheck all the problems until none remains and you're done.
I hope this works on you guys. :good:
Haven't worked
Teddy Lo said:
Hi , try this :
1. Unplug your device from pc
2. Open Sp Flash Tool with Administrator privileges
3. Go to Download and put scatter.txt file
4. Now go to Format and make sure that you have checked Auto Format Flash and Format whole except Bootloader , click on Start , wait few second and close Confirmation popup.
5. Now go to Download and instead of Download only do Format All + Download .
If not , try then Upgrade only or try to flash with another version of flash tool .
Good Luck
Click to expand...
Click to collapse
SORRY, But haven't worked for me, got the same error also while doing format.PLEASE HELP. ACTUALLY i am having lenovo k8 note and till yesterday, it was showing the pop-up that driver haven't installed because device is unplugged but i think that was due to bad data cable, so i changed that one and now i am having the error(0xc0060003). Don't know what to do next ,PLEASE HELP.
Hi , today I want to share with you how to fix soft-bricked Lenovo a390 which can't pass Lenovo boot animation , can't enter into recovery because it doesn't have any option .
So here we go :
Required files :
- PC or laptop with working internet connection
- Stock firmware :
http://www.mediafire.com/file/o3vkpzr6wdt0frv/Lenovo_A390_S316_MT6577_20130730.zip
- Sp flash tool (stored inside stock firmware)
- USB drivers (stored inside stock firmware)
Let's begin .
1. Once you download firmware stock firmware extract him on Desktop to be easy for you to navigate files .
- Install first drivers , you can do manualy or run Auto Installer Driver v1.1236.00 open SmartPhone driver and run driver installer for you version of os 32 bit or 64 bit.
2. Now open firmware and delete CheckSum.ini because it shows error at the end of flashing with Sp flash tool when is that file inside firmware.
3. Now open SP flash tool add MT6577_Android_scatter_emmc.txt , make sure that everything is checked , click on Format now check Auto format Nand Flash and Format whole flash except Bootloader and NVRAM Bin Region and click OK .
4. Now make sure your device is off , and plug usb cable on your phone and connect with PC now the format will begin . Once is finish , re-connect your phone with PC and fast click on Download button . Wait when is flashing finish , and once is finish unplug usb from your .
Now who want to flash also trwp touch recovery , he can do the same steps exept Format option :
Twrp Recovery :
http://lenovo-forums.ru/Files/OS/A390/Custom/recovery_TWRP_2.5.0.0_A390_S316_MT6577.zip
Now when everything is finish , power up your device normaly and check your if is everything working like IMEI , WIFI , Bluetooth .
Check imei *#06# it the status is invalid , turn off your device , write somewhere those two imei numbers check twice if is everything okay go to dialer and write this code *#*#3646633#*#* , now EngineerMode will pop up , scroll up and click on CDS Information now go to Radio Information now click on Phone 1 write inside input box AT+EGMR=1,7,"here you need to write your first 15 digit imei number" and click on SEND AT COMMAND , now go back and click on Phone 2 ] write inside input box AT+EGMR=1,10,"here you need to write your first 15 digit imei number" and click on SEND AT COMMAND . Once you do that , Power Off your device and power ON again , the problem should be solved .
For those who have wifi error nvram warning err= 0x10 you need to root your device .
This is the way for rooting which works for me :
- connect your phone with wifi network and download and install Framaroot 1.9.3 APK
https://forum.xda-developers.com/ap...pk-to-root-t2130276/post37508806#post37508806
once you downloaded open app and allow uncommon sources in order to install app , go back to Download folder and install . Once you installed , open it and click on Install SuperSU and from drop menu click on Faramir once rooting is finish turn off your phone and turn on again .
Now download this app MTK 0x10NVRam Fix from this link
https://apkpure.com/mtk-nvram-0x10-fix/itz.cod3r.mtk0x10
Once you downloaded open app and allow uncommon sources in order to install app , go back to Download folder and install . Once you installed , open it and when is finish reboot your device and the problem will be solved .
Good Luck
Hello!
My phone, Acer Liquid Z630s, recently had a problem and ended up shutting off as soon as it boots up. I turn it on, the Acer powered by Android white screen shows up then immediately shuts off. What was the problem here?
I couldn't access recovery mode either because it would also show up the same thing above then shut off immediately before it can even reach the recovery mode menu. But I could plug it in directly into download mode through SP Flash Tools because the phone vibrates when I hold down the volume up + power buttons (aka the recovery mode combination which was I think also the download mode combination). I downloaded the correct stock ROM off the Acer website (MT6753) and flashed it. The ROM was successfully flashed. But when I turned it on the screen lit up but it was just a blank black screen. It was lit up, but it was just dark black. I tried to wipe the system and flash the ROM again and at the end of the process, an error message appeared and I looked up the error code and this was exactly it:
"Error 6104
Message: BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR CODE : 0X00
Meaning: Wrong flash settings or firmware
Solution:
Ensure you set the correct Download-Agent in SP flash tool and are using a firmware for your exact model
Go to Options > Option > Connection > USB Speed > Full Speed
Go to Options > Option > Download > Untick DA DL All with Checksum"
I did what the solution told me, and as I tried to flash the ROM again, but I couldn't turn on my phone anymore. The volume up + power button combination no longer produces a vibration, and when I plug it into my computer it gets detected as a MediaTek USB Port (COM6) but SP Flash Tools no longer detects my phone and gives off this error:
"Error 0x13BE
Message: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)
Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash"
I don't know what to do at this point. Is it beyond salvation? But my phone still gets detected by my computer and it still produces the sound when you connect a device through the USB ports. Help me please.
Thank you in advance.
Hi , flash this firmware and in Sp Flash Tool set to Download only !!! When you Do Format + Download you lose your imei !
https://drive.google.com/uc?id=12CdmQaP8wi52RZO4jvjSikTWi2l4I1ZN&export=download
Teddy Lo said:
Hi , flash this firmware and in Sp Flash Tool set to Download only !!! When you Do Format + Download you lose your imei !
https://drive.google.com/uc?id=12CdmQaP8wi52RZO4jvjSikTWi2l4I1ZN&export=download
Click to expand...
Click to collapse
Hi there Teddy. Maybe you could help me. I was actually trying to make use of the same thing. SPFT. i flashed the stock rom. i tried rebooting it. seems that it has been bricked. I am using Starmobile Up Prime.
lexpizarro said:
Hi there Teddy. Maybe you could help me. I was actually trying to make use of the same thing. SPFT. i flashed the stock rom. i tried rebooting it. seems that it has been bricked. I am using Starmobile Up Prime.
Click to expand...
Click to collapse
Hi, If you flashed right stock firmware for your device correctly, your device it should not be bricked so I thing your flash file are not good.
Explain me what did you tried and which file you flashed?