[Q] Urgent Help Needed - Stuck on preparing USB storage - Galaxy S II Q&A, Help & Troubleshooting

Hi ,
Last week i formatted my internal sd card and after that my phone started to get stuck always.
I was on resurrection remix with dorimanx kernel .
when this stuck issue got severe i flashed stock rom and checked now my phone always hangs on reboot at the preparing internal storage checking for errors screen and am unable to use it .
Is there any fix for this issue
someone please help

aks6630 said:
Hi ,
Last week i formatted my internal sd card and after that my phone started to get stuck always.
I was on resurrection remix with dorimanx kernel .
when this stuck issue got severe i flashed stock rom and checked now my phone always hangs on reboot at the preparing internal storage checking for errors screen and am unable to use it .
Is there any fix for this issue
someone please help
Click to expand...
Click to collapse
Flash PIT file

at present i have flashed XWLST stock rom
is there a particular pit for the rom or pit file is device dependent ?

flashed XWLST with pit file , the flash completed successfully and after rebooting the device is stuck at set up screen
it gets stuck at the select language or wifi selection or setting time screen
any solutions ? pls help

Related

[Q] ICS CM9 problem

when i finished flashing alpha3-cm-9.0.0-RC0-Atrix-KANG-signed.zip from this website http://goo-inside.me/roms/jokersax/ today.
i occured a strange problem.when i first entered the system correctly.
then phone reboot suddenly and stuck at the moto logo.
i don't know why and i did 3wipes and flashed the bell radio.
anyone has any answers?? thx a lot.
go here, there are 40 + pages that will help you http://forum.xda-developers.com/showthread.php?t=1445052
you have to format /system in recovery and install ICS again

[Q] Please Need Help Urgently.

Guys Recently i have updated with my phone with latest Jellybean 4.1.2. Then i have rooted my phone and install CWM via play store restart the phone and installed Cyanogenmod. Now my phone is having problem Internal memory is not shown and not be formatted its shown blank storage Sd card also not showing. I have started flashed the stock rom with odin still its stuck at NAND Write Start. Please Help me ...:crying::crying::crying:

[Q][SOLVED!!] samsung galaxy mega i9200 set warant bit kernel and ime null/null

hie guys i need help with my samsung galaxy mega i9200 i was using it on the internet whilst connected to wifi a few hours ago and it prompted me for a software update of which i accepted and downloaded after it had finished downloading it prompted to reboot and install of which i accepted but after the install it started having a boot loop so i downloaded stock rom from sammobile (android firmware 4.2.2 ) and installed on my phone using odin 3.0.7 but now it starts up and says set warant bit kernel also the following are not working music or video players there is no sound even system sounds the camera is not recording videos there is no network and it says ime null /null everything else is fine. I uploaded a video on youtube titled "Samsung galaxy mega i9200 set warant bit kernel and ime null " showing all these issues i couldnt post the link since i am a new user .
Thank you guys in advance i know you can help me.
THOU nobody bothered to help me fix this problem here is the solution for future references:
After trying so many different methods to fix my phone i finally got a way to fix the problem and now i will give the solution in order for someone who has the same problem to be able to fix it .
At first i tried updating my galaxy mega i9200 to 4.4 kitkat using O.T.A but after installation the phone started to have a boot loop so i decided to root the device which ended up causing my warrant to become void now my phone starts up with a message written in yellow written set warrant bit kernel , i tried to downgrade it back to its stock rom 4.2.2 but upon installation using odin 3.0.7 i installed the wrong country firmware which resulted in my device having errors written image size too large ....... after this i tried installing megakat 22v but still it didn't work it only started to freeze on the Samsung logo . I later on used Samsung kies to help me find the country which my device firmware was made from , the steps are as follows on Samsung kies go to tool/firmware upgrade and initialization/model (type GT-I9200)/serial number (type -------)/..
After i got my original firmware which was Thailand *(THL) i tried to install with odin 3.0.7 but it failed so kept on trying different firmwares until the one from Egypt worked but when it booted there was no sound , no Bluetooth , couldn't recording sound or video no WiFi and ime was null/null so i decided to download kitkat from the firmware manufacturer Thailand (THL) from androidxda but this time instead of installing the kitkat i opened the I9200XXUCNC2_I9200OLBCNC1_I9200XXUCNC2_HOME.tar .md5 file with 7zip and extracted a file called NON-HLOS.bin its 49.5mb in size this is a file that contains the modems of the phone and other files required for sound and ime , so i put my phone in download mode and opened odin 3.0.9 . I loaded the NON-HLOS.bin file into odin through CP and i hit start after the install the phone was perfect everything worked fine the ime is restored and all is well .
same problem here... hope your method work for me cus I have been searching this entire forum for a fix to my phone...

MY S3 THINKS IT HAS 10 GB OF RAM!?!?!?!? It also crashes and bootloops constantly.

Hi,
I have had my phone in a bootloop for the last week where I could not access download mode. However, I finally managed to flash stock firmware 4.2.2. It booted up fully and I thought it was all solved when... it started crashing and getting into a bootloop which would be fixed by removing and reinserting the battery.
What I noticed when I went into settings and looked at running apps, was that I was using 0.95gb-1gb of the phones 10GB of RAM!!!!!! Obviously this is not the real amount of the i9300's ram (which is 1GB).
I am now suspecting that I have some sort of problem with my Kernel....?? I am also guessing that the crashes and bootloops come from the phone trying to access an amount of ram which it thinks it has, but is simply not there.
Currently I am in a bootloop where I can access recovery (CWM) for a second and it immediately crashes and reboots. Same for download mode.
Any help is appreciated. I've not found any, but if you happen to know of any other thread which solved this problem, please link. Thanks in advanced.
alexdelrio7 said:
Hi,
I have had my phone in a bootloop for the last week where I could not access download mode. However, I finally managed to flash stock firmware 4.2.2. It booted up fully and I thought it was all solved when... it started crashing and getting into a bootloop which would be fixed by removing and reinserting the battery.
What I noticed when I went into settings and looked at running apps, was that I was using 0.95gb-1gb of the phones 10GB of RAM!!!!!! Obviously this is not the real amount of the i9300's ram (which is 1GB).
I am now suspecting that I have some sort of problem with my Kernel....?? I am also guessing that the crashes and bootloops come from the phone trying to access an amount of ram which it thinks it has, but is simply not there.
Currently I am in a bootloop where I can access recovery (CWM) for a second and it immediately crashes and reboots. Same for download mode.
Any help is appreciated. I've not found any, but if you happen to know of any other thread which solved this problem, please link. Thanks in advanced.
Click to expand...
Click to collapse
Flash 4.3 or 4.4 if available and use optiin nand erase all in odin with pit file and repartition

Wiko Fever No Command after update

Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...

Categories

Resources