Hey guys,
i tried to switch from the cyanogen9 to mwakious 3d Rom but it ends i a nice bootloop and i dont know how i should go on.....
i followed the http://www.adammosscomedy.co.uk/Temp/mwakinstall/instmwak.html
at point 1b.
i downloaded the PG86img... check
check
check
chek
till i have to install the new rom v.12.0 and the 12.x
there at downloads http://forum.xda-developers.com/showthread.php?t=1648407
but when i want to reboot after rom installation (there are no problems during the installions) it ends into the bootloop with the htc logo
I hope u can help me... i'm goiong to go to the holidays tomorrow but with nooo phone???? OMG ^^
HERE are my stats of the phone:
Shooter_U pvt ship s-off rl
HBOOT - 1.49.0007
Radio - 11.25.3504.06 M --- That is the version after the unpacking pg86img.zip
OpenDSP- v02.6.0.2226.00.0202
eMMC- Boot
I hope u can help meee ty guys :good:
hello
I recently bought my htc amaze in india factory unlocked asian version. when ever i try to update my phone it keeps on saying your phone is upto to update available. then did some research n unlocked bootloader using htc dev and then tried to s-off using jounoutor beer. but still i cant s-off my phone n i m stuck on gingerbread please help me to s-off n update to ics.
my bootloader says. ruby pvt ship s-on rl
hboot- 1.92.0000
emmc-boot
There's nothin anyone can do to help you s-off. You need to just keep trying until you get it
sent from my
NRGized amaze
powered by Faux
skyonfire23 said:
hello
I recently bought my htc amaze in india factory unlocked asian version. when ever i try to update my phone it keeps on saying your phone is upto to update available. then did some research n unlocked bootloader using htc dev and then tried to s-off using jounoutor beer. but still i cant s-off my phone n i m stuck on gingerbread please help me to s-off n update to ics.
my bootloader says. ruby pvt ship s-on rl
hboot- 1.92.0000
emmc-boot
Click to expand...
Click to collapse
Well try flashing the tmobile GB Rom you MITE get the updates but no guarantee that it'll work cuz I got the update when I was still S-ON but I never tried the update so mostly the only way is to follow this http://forum.xda-developers.com/showthread.php?t=2167596 good luck
This is what my setup was before:
Revolutionary
Shooter XC SHIP S-OFF RL
HBOOT-1.40.1100
Radio-0.97.10.0530
eMMC-boot
jun 8 2011
Android version - 2.3.4
htc sense - 3.0
software - MeanRom 4.3
Click to expand...
Click to collapse
After advise from here: http://forum.xda-developers.com/showpost.php?p=40226467&postcount=5500
I updated to 4ext and tried flashing some different ROMS.
MEAN Rom Mean kept on having the market error out, yes I dled newest market and verified check sum. So I tried Gangum style CM 10 CM10 and the stock ASOP keyboard kept crashing.
Unfortunately, with CM10 still on, I went into the hboot and updated to OTA_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2-2.17.651.5 http://forum.xda-developers.com/showthread.php?t=1808150 Because I thought the firmware was causing the problems.
Now I'm bootlooping.
Now, in hboot it shows
*** locked ***
Shooter XC SHIP S-OFF RL
HBOOT-1.58.0000
Radio-1.09.00.0706
OpenADSP-v02.6.0.2226.00.0217
eMMC-boot
May 17 2012
Click to expand...
Click to collapse
When I tried to recover with my backup (MeanRom 4.3) , now the phone just bootloops to the HTC screen, instead of looping after it goes HTC then cynanogen.
How do I un**** my phone?
I would like to run either the newest MEAN or the newest CM. Can someone help out my stupid ass?
Did you do the super wipe?
Sent from my Evo V 4G using xda app-developers app
hossman said:
Did you do the super wipe?
Sent from my Evo V 4G using xda app-developers app
Click to expand...
Click to collapse
In the CM10 thread, it said not to use superwipe, but to instead use the option in 4 that wipes/formats all but the SDCard. So I did that each time, before flashing a new rom.
I'm thinking that I should flash JBear GB 1.50.5050 , then try and load CM10? Or would I want to use 1.57.5757 ?
Sorry, there is just alot of new stuff and tons of new hboots since my original "pull the battery to root" back when the 3D first came out. Lots to try and figure out.
Ok guys I am new to the whole rooting and flashing game and I think I might have messed up bad . I am currently experiencing a problem with the boot animation looping when I went to install a ROM I then proceeded to accidentally hitting factory reset in the bootloader menu. Now I have no backups of my shipped htc rom and I am currently lost. Couldn't really find my exact same problem in the forums so I figured I'd go and post this. I just want to get back to my shipped rom and want my phone working again, how do I do so???
**Tampered**
**Relocked**
***Security Warning**
Jewel PVT SHIP S-ON RL
Hboot- 2.09.0000
Radio- 1.12.11.1210
OpenDSP-v31.1.0.45.0815
eMMC-boot
Oct 18 2012,15:46:20
PLEASE HELP GUYS! IM A NOOBIE AND NEED SOME ADVICE!
Download viper rom, it has a s-on installer, just follow the instructions in the OP... Don't panic... Do you have twrp installed?
http://forum.xda-developers.com/showthread.php?t=2124391
[ROM][5/19]Team Venom Viper4G 3.1.5 (3.1.6 OTA) | 3.16.651.3 | Venom Tweaks
Sent from my EVO
reply
jocarog said:
Download viper rom, it has a s-on installer, just follow the instructions in the OP... Don't panic... Do you have twrp installed?
http://forum.xda-developers.com/showthread.php?t=2124391
[ROM][5/19]Team Venom Viper4G 3.1.5 (3.1.6 OTA) | 3.16.651.3 | Venom Tweaks
Sent from my EVO
Click to expand...
Click to collapse
Yes I have twrp installed so, have to put the Viper rom on my sd card and flash it using twrp?? lol sorry for bein sucha noobie, first time flashing roms and such
Yes download the rom, place it in your sd card, then got to twrp and install the rom, follow the s-on instructions ad it requires an extra step to flash the boot.img...
Sent from my EVO
You need to unlock your bootloader, since it's showing relocked. Once you've done that, you can flash a ROM. In addition, since you're S-on, you will need to flash the ROM kernel separately from the ROM, so do as suggested above and install a ROM with an S-on kernel installer, or you'll have to fastboot flash the kernel for the ROM to boot.
Click the link in my sig if you need help.
Sent from my EVO using xda premium
Thanks
Thank you guys. The viper Rom works great!! Its a lot better than the default sense 4+ you guys saved me.
Thanks for the help :good::laugh:
theabbatelli said:
Thank you guys. The viper Rom works great!! Its a lot better than the default sense 4+ you guys saved me.
Thanks for the help :good::laugh:
Click to expand...
Click to collapse
I'm in the same boat as OP, and I'm getting viper as a short term fix.
only difference is mine says "unlocked".
Tried to flash that Viper zip you guys suggested but it simply says "failed"
any advice?
I did this after getting my brand new replacement phone in the mail today.
I am so angry with myself right now..
t3chn0v1k1ng said:
I'm in the same boat as OP, and I'm getting viper as a short term fix.
only difference is mine says "unlocked".
Tried to flash that Viper zip you guys suggested but it simply says "failed"
any advice?
I did this after getting my brand new replacement phone in the mail today.
I am so angry with myself right now..
Click to expand...
Click to collapse
What version of twrp are you using?
Sent from my EVO
jocarog said:
What version of twrp are you using?
Sent from my EVO
Click to expand...
Click to collapse
2.5.5.0
here's the rest of my info just in case.
Kernel 3.4.10-g19136fe [email protected] #1 SMP PREEMPT
baseband version: 1.12.11.1210
PRI version: 2.97_003
PRL version: 25015
Software version Viper4G 3.1.5
TWRP: 2.5.5.0
***tampered***
***unlocked***
JEWEL PVT SHIP S-ON RL
Hboot-2.09.0000
Radio-1.12.11.1210
OpenDSP-v31.1.0.45.0815
eMMC-boot
oct 18 2012
I actually just started my own thread on this if you care to chime in with your knowledge.
Hey guys.. I've got an EVO 3d from Virigin Mobile. I have been running the Harmonia rom for over a year and would like to upgrade to CyanogenMod 11.0 - VILLUMINATI CyanogenMod 11.0 - VILLUMINAT
My bootloader shows this:
Code:
Unlocked
Shooter XC SHIP S-ON RL
HBOOT-1.57.0000
eMMC-boot
Apr 20 2012, 17:39:22
I am uncertain but I think I may need to upgrade my radio as an update came out after I switched to the custom rom and it was not applied.
My question is, what do I need to do to ensure that I can flash CM11? Do I have to be S-OFF to do this? I have flashed all roms I've tried on this phone using 4EXT which allows for flashing some (all??) roms that are S-ON.
I was thinking about getting a new phone, but I'd like to try and flash a new rom to see if I can get a little more time out of this phone. Any help you can provide would be greatly appreciated.
You need s off and hboot 1.50 or lower.
Then you can flash
Sent from my Evo V 4G using XDA Free mobile app
hossman said:
You need s off and hboot 1.50 or lower.
Then you can flash
Sent from my Evo V 4G using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the information. I'll give it a go.