I have a S3 that received OTA and I updated. I am talking about a stock S3, no root, no changes. The phone died and I could not enter recovery mode. I can only enter the Odin Mode. I tried first with Keis in some computer and cables but Keis cannot recognize the phone.
I then tried ODIN 3.07 with a stock image but that didnt work. (see below, it says there is no pit partition). I also tried to repartition but it fails.
I tried ODIN in several computer and several cables as well, including a Windows XP.
This appear on the phone:
Code:
"Odin Mode
Product name: GT-I9300
Custom binary Download: no
Current Binary: Samsung Official
System Status: Custom".
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGND5_I9300EPLGNE1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
This I tried later (re partition):
Code:
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas on how to fix this?
jsmith432 said:
I have a S3 that received OTA and I updated. I am talking about a stock S3, no root, no changes. The phone died and I could not enter recovery mode. I can only enter the Odin Mode. I tried first with Keis in some computer and cables but Keis cannot recognize the phone.
I then tried ODIN 3.07 with a stock image but that didnt work. (see below, it says there is no pit partition). I also tried to repartition but it fails.
I tried ODIN in several computer and several cables as well, including a Windows XP.
This appear on the phone:
Code:
"Odin Mode
Product name: GT-I9300
Custom binary Download: no
Current Binary: Samsung Official
System Status: Custom".
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGND5_I9300EPLGNE1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
This I tried later (re partition):
Code:
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas on how to fix this?
Click to expand...
Click to collapse
Pit partition is corrupt try rescue firmware if that fails service center >> http://forum.xda-developers.com/showpost.php?p=30087735 <<
tallman43 said:
Pit partition is corrupt try rescue firmware if that fails service center >> http://forum.xda-developers.com/showpost.php?p=30087735 <<
Click to expand...
Click to collapse
Thanks for the tip, however, I guess it stuck on the pit partition again (1 hour already):
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
Related
i had ICS installed in my Galaxy S2 by myself using Odin.
I tried to install Jelly bean , but failed and now its in Downloading mode. i dont know what to do know. i tired to install Ginger bread still stuck. i even dont know which stock rom i need. and where i can download it from ??
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWKJ3_I9100XENKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried another firmware
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLA4_I9100XXKI4_I9100EPLKL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
its in download mode which show on top left
ODIN MODE
PRODUCT NAME: GT-I9100
CUSTOM BINARY DOWNLOAD: YES (1 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
so worried...
i dont know nothing about it.
Please can someone tell me what to do ??
Thanks
i have posted this thread twice. but no reply : ((
i had ICS installed in my Galaxy S2 by myself using Odin.
I tried to install Jelly bean , but failed and now its in Downloading mode. i dont know what to do know. i tired to install Ginger bread still stuck. i even dont know which stock rom i need. and where i can download it from ??
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWKJ3_I9100XENKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried another firmware
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLA4_I9100XXKI4_I9100EPLKL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
its in download mode which show on top left
ODIN MODE
PRODUCT NAME: GT-I9100
CUSTOM BINARY DOWNLOAD: YES (1 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
so worried...
i dont know nothing about it.
Please can someone tell me what to do ??
Thanks
hi ... i'm using galaxy s3 gt i9300 and have been using cm11 for 6 months normally..
yesterday suddenly my phone was stuck at samsung screen ... i tried twrp to reinstall cm11 but when i tries to factory reset it fails and shows a bunch of errors like :
unable to mount system
unable to mount data
unable to mount storage .. etc
then i tried to install from micro sdcard but it shows 0mb same as internal storage..
i tried to flash cm11 via adb from pc but it also fails
can you help me ?
thanks
i tried but it also failed it says in log box : re-partition operation failed
this is what i get when i try to flash another recovery (philz) :
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> PK
<ID:0/003>
and gets stuck at NAND Write Start!! forever
any1 can help ???
@black leg try to flash stock rom using odin !!!
princevirus said:
@black leg try to flash stock rom using odin !!!
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMK6_REV02_REV04_CL1413323.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9300OXAGMK6_2168382_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9300XXUGMK6_2168382_REV00_user_low_ship_.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also tried to only flash the rom and tried to flash with pit file but it always fails or gets stuck at nand start all
Hey all,
Long story short is my VZW SM-N950U Note 8 is not working well on T-Mobile because it still has VZW firmware. I downloaded Odin 3.07 and 3.12 and used samfirm to get the TMO firmware. I've attempted to DL multiple times and it fails. Is there something else I have to do, or is it just not possible to do? Also it never gets a loading bar or anything, just fails or stick on setup connection.
Thanks in advance below is the cut n paste of the log from odin 3.12
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> persist.img.ext4
<ID:0/005> userdata.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I once tried to autoroot it but I factory reset it because the sim didn't work, and I went to developer options and had it OEM Locked, I don't know what was I thinking, seriously, and I tried to use Odin v3 to flash original firmware into it, It gives me this: <ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2546 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried using multiple odin's and I have a Samsung usb driver installed.
Android Recovery
Samsung/j5y17ltexx/j5y17lte
7.0/NRD90M/J530FXXU1AQF5
Please Help Me I Have No Phone Currently, The Small And Big Are Going To Be Appreciated, Sincerely, RetroSkills.