Related
i tried to flash LP7 kernel on ICS firmware XXLPS on my Galaxy SII and it was successful but after the reboot phone got stuck at the yellow triangle screen.
Now i tried to flash a new firmware XXLPQ (older than XXLPS) but it failed and i get message on the phone that firmware upgrade encountered an error, connect to kies.
have i bricked my phone or is there a way out here?
Please help.
Khalid.
kmugal said:
i tried to flash LP7 kernel on ICS firmware XXLPS on my Galaxy SII and it was successful but after the reboot phone got stuck at the yellow triangle screen.
Now i tried to flash a new firmware XXLPQ (older than XXLPS) but it failed and i get message on the phone that firmware upgrade encountered an error, connect to kies.
have i bricked my phone or is there a way out here?
Please help.
Khalid.
Click to expand...
Click to collapse
What is the status of your phone now (after flashing XXLPQ)? Can you enter download mode?
fxrb said:
What is the status of your phone now (after flashing XXLPQ)? Can you enter download mode?
Click to expand...
Click to collapse
flashing XXLPQ fails.
when i switch on the phone i get a message "Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again".
Yes i can enter download mode.
kmugal said:
flashing XXLPQ fails.
when i switch on the phone i get a message "Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again".
Yes i can enter download mode.
Click to expand...
Click to collapse
I assume you were flashing with ODIN and therefore that you are familiar with it. If not just don't go ahead; do some reading instead .
Put your phone into download mode and make absolutely sure Kies is not running. Start ODIN, then connect the phone by USB. Does ODIN detect the phone?
fxrb said:
I assume you were flashing with ODIN and therefore that you are familiar with it. If not just don't go ahead; do some reading instead .
Put your phone into download mode and make absolutely sure Kies is not running. Start ODIN, then connect the phone by USB. Does ODIN detect the phone?
Click to expand...
Click to collapse
I made sure Kies is not running, checked all the process under task manager.
Yes i am using ODIN1.85, it detects my phone but flashing fails, i think because i had XXLPS already and now i am trying to flash XXLPQ.
I actually wanted to flash CM9, and the procedure i found online said i must have XXLPQ, and for that i must have LP7 and clockwork recovery.
Try to go into recovery and wipe data + cache and format /system. Finally flash a rom in odin
If it fails, try odin and reparation with pit.
If no go, it is a physical damage in partition. RMA
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
Try to go into recovery and wipe data + cache and format /system. Finally flash a rom in odin
If it fails, try odin and reparation with pit.
If no go, it is a physical damage in partition. RMA
i dont have recovery on my phone.
so only option is repartition with pit file.
now can you please help me where to find correct pit file and firmware for my phone.
How do i find which variant is my phone (I9100 or I9100G etc)
Click to expand...
Click to collapse
kmugal said:
i dont have recovery on my phone.
so only option is repartition with pit file.
now can you please help me where to find correct pit file and firmware for my phone.
How do i find which variant is my phone (I9100 or I9100G etc)
Click to expand...
Click to collapse
Every phone has recovery. Power off, hold down the volume up, home, and power buttons. When your see the screen come on, let go of power, but keep holding home and volume up.
To find out your exact model number, look on the label under the battery.
ctomgee said:
Every phone has recovery. Power off, hold down the volume up, home, and power buttons. When your see the screen come on, let go of power, but keep holding home and volume up.
To find out your exact model number, look on the label under the battery.
Click to expand...
Click to collapse
Thanks, My phone does not enter recovery mode.
Can you please guide me where i can download pit and ICS firmware for I9100.
kmugal said:
Thanks, My phone does not enter recovery mode.
Can you please guide me where i can download pit and ICS firmware for I9100.
Click to expand...
Click to collapse
does it matter if i have SD card in phone or not.
i currently have not SD card inserted in my phone.
kmugal said:
Thanks, My phone does not enter recovery mode.
Can you please guide me where i can download pit and ICS firmware for I9100.
Click to expand...
Click to collapse
You sure you have an i9100 now? You're currently active in another thread that is specific for i9100G.
In any case, if you keep going down the road of using a .pit file, make sure you use one for your specific model.
Look in the stickies in Q&A, there is a guide for fixing unflashable GSII by phistashio, I think his name is. There are .pit files there, I believe.
Thanks for all your support guys.
I managed to recover my Galaxy SII I9100 using phistasio's guide.
I do have a similar problem
Hello.
Sorry for taking your time. And for my bad english.
I'm from Lisbon, Portugal and bought a I9100 in May 2011, in a big store that imports cells from Germany.
Trought kies, i've been able to upgrade my I9100 firmware.
Last month i installed an anti-virus (kaspersky). A week later, I was able to uninstall it with Uninstaller App. It was not a good idea - each time i opened the display, I needed to put my password. I was told about this site, where I saw the brand new I9300XXBLG8_I9300OXABLG8_I9300XXLG8, and decided to make an upgrade. Used Odin, and... all right. But, each time I enter kies to see if there was an upgrade, a window apears saying it was not possible to make an upgrade trought kies. To be able to do future upgrades, I tried to change my csc (DBT) to btu, or xeu, but, with samsung galaxy 2/s2 csc, the only csc it showed was dbt (the german csc). So, I tried to put another firmware - this one, from Germany. I found it in this site - I9100GXXLPY_I9100GXXLPV_I9100GDBTLP3.
I put my device in Recovery MODE (Home + Volume up + Power) -> Wipe Data/Factory reset. WHEN THE PHONE WAS OPENING, I took out the battery & put it back in -> put my device into Download MODE (Home + Volume Down + Power) -> put my device into Download MODE (Home + Volume Down + Power) -> clicked PDA and selected *.tar.md5 and clicked START.
After some moments, I got a message of FAIL.
Now, if I try to enter Recovery Mode, I receive a message saying - "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". And, to be able to put this message off, must take the battery out.What did I do wrong? What shall I do?
I know your time is precious to be wasted with this problem. But, please, will you help me?
I thank you very much.
Pedro Branco
pbroncas said:
Hello.
Sorry for taking your time. And for my bad english.
I'm from Lisbon, Portugal and bought a I9100 in May 2011, in a big store that imports cells from Germany.
Trought kies, i've been able to upgrade my I9100 firware.
Last month i installed an anti-virus (kaspersky). A week later, I was able to uninstall it with Uninstaller App. It was not a good idea - each time i opened the display, I needed to put my password. I was told about this site, where I saw the brand new I9300XXBLG8_I9300OXABLG8_I9300XXLG8, and decided to make an upgrade. Used Odin, and... all right. But, each time I enter kies to see if there was an upgrade, a window apears saying it was not possible to make an upgrade trought kies. To be able to do future upgrades, I tried to change my csc (DBT) to btu, or xeu, but, with samsung galaxy 2/s2 csc, the only csc it showed was dbt (the german csc). So, I tried to put another firmware - this one, from Germany. I found it in this site - I9100GXXLPY_I9100GXXLPV_I9100GDBTLP3.
I put my device in Recovery MODE (Home + Volume up + Power) -> Wipe Data/Factory reset. WHEN THE PHONE WAS OPENING, I took out the battery & put it back in -> put my device into Download MODE (Home + Volume Down + Power) -> put my device into Download MODE (Home + Volume Down + Power) -> clicked PDA and selected *.tar.md5 and clicked START.
After some moments, I got a message of FAIL.
Now, if I try to enter Recovery Mode, I receive a message saying - "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". And, to be able to put this message off, must take the battery out.What did I do wrong? What shall I do?
I know your time is precious to be wasted with this problem. But, please, will you help me?
I thank you very much.
Pedro Branco
Click to expand...
Click to collapse
You flashed an i9100G firmware to an i9100. Firmwares are not compatible between these variants.
You also were basing your desire to upgrade on the existence of a firmware for the i9300, which is the galaxy s3.
Thanks, ctomgee
ctomgee said:
You flashed an i9100G firmware to an i9100. Firmwares are not compatible between these variants.
You also were basing your desire to upgrade on the existence of a firmware for the i9300, which is the galaxy s3.
Click to expand...
Click to collapse
I thank you for your great help.
I saw my mistakes: the new brand firmware I installed was, not I9300XXBLG8_I9300OXABLG8_I9300XXLG8; but I9100XWLPT_I9100XXLQ6_I9100XEULPA. So, I reinstalled this last one, and the cell is fine
Thank you.
But I'd like to make a very last question - as I said, the cell is fine, but... I'm not able to upgrade it's firmware using Kies. I think it's because the store where I bought my I9100 imported it from Germany - so, its csc is DBT. The csc from the firmware I installed is XEU - don't understand why, but, when I open Kies, in the csc place, it says DBT. I tried to use the CSC Select app, to choose BUT or XEU. but I have no choice - the only csc there is DBT,
As you know all about Android world, could you tell me what shall I do to be able to get upgrades from Kies?
Once again, sorry for my bad english and thank you very much for your help.
Pedro Branco
Today Evening i went out with my friends, and we took few photos on my mobile.. After that my friend gave my mobile by stating it got stucked. I looked into it, yes it got stucked.. Then i forced it to restart.. it could not start, stucked on bootscreen. so i simply removed the battery and put the mobile into my pocket. once after i reached my home, i started the mobile.. again it got stucked in bootscreen. Then i gone into recovery mode and flashed the same rom (neatrom v4.7) on it from my sd card. Then it got booted, after sometime again it restarted automatcally and stucked on bootscreen. This time i could not even get into recovery mode.. so i downloaded the official stock firmware to install via download mode. Then i tried to flash through odin. it did not got flashed or anything happened for nearly half an hour. so i removed the usb cable from the laptop, immediately phone screen got off.. when i tried to switch on or get into download mode.. my phone does not responds, it is dead. i tried many ways like removing battery and inserting charger while pressing on power button then inserting the battery at the same time. what did i wrong? help me plzzz friends.. what should i do now to get back my mobile?
You plugged out your phone from PC while downloading from Odin?!?!?You completely bricked your device now.Maybe it couldn't flash the kernel or the firmware...Now phone is of course dead.You need to buy a new motherboard.BTW,what firmware did you flash?Do you have I9100 or other variant?
When you flashed a stock ROM, did you flash a pit file as well?
If no, get a jig so you can get to Download mode.
Sent from the little guy
GamingDj said:
You plugged out your phone from PC while downloading from Odin?!?!?You completely bricked your device now.Maybe it couldn't flash the kernel or the firmware...Now phone is of course dead.You need to buy a new motherboard.BTW,what firmware did you flash?Do you have I9100 or other variant?
Click to expand...
Click to collapse
I tried to flash this firmware "Base Firmware: I9100XWLSS (4.1.2)" from http://forum.xda-developers.com/showthread.php?t=1544487
i have I9100
gastonw said:
When you flashed a stock ROM, did you flash a pit file as well?
If no, get a jig so you can get to Download mode.
Sent from the little guy
Click to expand...
Click to collapse
no bro i did not flash a pit file.. i just flashed the md5 file from the firmware zip on pda. the flashing did not occur, it was got stopped in cache.img step.. i have waited for long.. it was showing same status. that's y i removed the cable from it.
Kumarankav said:
no bro i did not flash a pit file.. i just flashed the md5 file from the firmware zip on pda. the flashing did not occur, it was got stopped in cache.img step.. i have waited for long.. it was showing same status. that's y i removed the cable from it.
Click to expand...
Click to collapse
Your initial problem of bootloop could have been easily solved, I don't know what the other people do but when I gave my custom rom installed phone to my brother for a couple of days his friends played with it walla.. Bootloop.. Fix as usual was easy, a cache and dalvik wipe fixed it otherwise a nuke script and a flash would have worked.
But pulling the cable out before flashing is completed or unless terminated by the app itself is a bad thing to do, really bad...
Sent from my GT-I9100 using xda app-developers app
Service centre. You're paying.
I took my mobile to samsung service center, they checked and told that i need to change the motherboard.. which costs Rs.8500..
Kumarankav said:
I took my mobile to samsung service center, they checked and told that i need to change the motherboard.. which costs Rs.8500..
Click to expand...
Click to collapse
Maybe you can buy another on eBay,then you'll just give it to them to replace.Or change it yourself.Both ways you'll save money
Just get a jig and try.
Sent from the little guy
Hi.
Please read all of what I tried before suggesting something.
I have a S3 GT-I9300 international version. It's from Orange Israel and its warranty recently ended.
All of what I tried below has been done with the phone in the Download mode by turning it while holding the power, volume down and the home key, there is absolutely nothing else this phone can do, if I just normally power it on it'll get stuck on the Samsung Galaxy S3 screen, I can't even get to the animated Samsung logo. Kies is uninstalled completely and I have no AV.
Now here is what I tried so far:
1. Most forums said that I could try a regular flash via Odin by inserting the firmware.md5 file into the PDA section and flashing it, but that just makes Odin get stuck on the process (Setup Connection...) or give me this error [1st screenshot from the left]
2. I also tried attaching the .pit file for my 16GB S3 named (GT-I9300_mx_20120220.pit) alone but that makes Odin get stuck on this process as well [2nd screenshot from the left]
3. I tried attaching both .md5 and .pit files at the same time but it just also gets stuck on the (Setup Connection...) forever. And when I say stuck I don't mean Odin stops responding, I mean it just hangs on that process.
4. I looked in forums even more and they suggested I try different USB ports or cables and I did, still nothing.
5. I tried different Odin versions for all of the things I already tried.
6. I tried flashing different firmware versions for all of the things I already tried.
7.1. I downloaded Heimdall Suite and I tried to use it since a guy mentioned it helped him immensely by him just installing the drivers using the "zadig.exe" file and choosing his S3 from the All Devices list and installing the driver, however I encounter something different because the program has Replace Driver option that gives me this error [3rd screenshot from the left]
7.2. I later discovered that I can install the driver anyway by clicking the arrow next to the button and choosing Install WCID driver, that worked successfully, however it hasn't solved my problem like the guy on the forum, for him, the S3 started to get recognized by Odin and it flashed his device successfully, for me, it still gave me that error.
8. After I installed the driver from Zadig I launched Heimdall Suite in hopes of finally flashing my device but it gave me this error when trying to load up the .md5.gz [4th screenshot from the left]
9. I then proceeded to add the .pit file I downloaded earlier into the Flash tab in Heimdall tool and adding the boot.img because I think that should be enough to get it going, plus I don't know what else to put. It gave me this error [5th screenshot from the left]
I'll keep updating this post when I try new stuff, however I would like you guys to suggest things I haven't tried before or supply me with files I haven't found already (.pit files, firmwares I'm not aware of, etc.). Would appreciate any little help of sorting this problem out, the warranty ended so I don't know what am I gonna do if I don't get it fixed :/
Thanks.
=/
Yep sounds bricked. If that's the case, send for repair. Your NAND is probably borked.
Out of interest, what does all the info on the screen say in download mode?
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
Yep sounds bricked. If that's the case, send for repair. Your NAND is probably borked.
Out of interest, what does all the info on the screen say in download mode?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YEes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Does that give you any idea of what I should try next?
I really want to put repairing the phone to the absolute last option.
Remove Kies = remove USB drivers Odin may not work .
PIT can kill your phone .
I don't think its SDS more like your flashing PIT has bricked the phone .
jje
XYMan28 said:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YEes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Does that give you any idea of what I should try next?
I really want to put repairing the phone to the absolute last option.
Click to expand...
Click to collapse
The problem with the S3 is that there really aren't many options before the last option. From what I can see, you have already tried them all.
It tells me you haven't got SDS, but we already knew you had a NAND issue, regardless of that. It was just a matter of interest.
JJEgan said:
Remove Kies = remove USB drivers Odin may not work .
PIT can kill your phone .
I don't think its SDS more like your flashing PIT has bricked the phone .
jje
Click to expand...
Click to collapse
I didn't mention that I also tried all of what I tried with Kies installed.
And it is SDS, I was just browsing through photos and the phone just locked up and restarted and couldn't get passed the GALAXY S3 flash screen, which is why I started trying all this crap, including flashing PIT. And the symptoms and behavior of the phone hasn't changed since the first time it restarted on me. So I definitely didn't change ANYTHING to the phone whatsoever.
XYMan28 said:
I didn't mention that I also tried all of what I tried with Kies installed.
And it is SDS, I was just browsing through photos and the phone just locked up and restarted and couldn't get passed the GALAXY S3 flash screen, which is why I started trying all this crap, including flashing PIT. And the symptoms and behavior of the phone hasn't changed since the first time it restarted on me. So I definitely didn't change ANYTHING to the phone whatsoever.
Click to expand...
Click to collapse
It could be SDS. We've seen a few failures like this where download mode doesn't show SDS symptoms. It doesn't mean the result is not SDS. Its uncomfirmable.
SDS possible , Nand damaged itself possible but 90% of problems are user error .
That error is often in trying to smash their way out of trouble avoiding the simple correct method and throwing everything at the phone .Following stuff from multiple forums then asking help on XDA at the end when it is to late .
Whatever you have done in the past right or wrong does not matter it is now a service centre job .
Samsung generally offer 24 months limited warranty but would be likely to reject due to custom rom count .
jje
My GT-I9300 international galaxy S3 decided yesterday to brick itself, all of a sudden its stuck at the boot screen (white samsung ... text).
Tried to reboot into recovery but no go, when i hold the buttons it just continues to reboot and reboot, only showing the white text.
Tried to reboot into download and that worked, i though fhew, i got a berak and not all is lost.
In download mode it says current binary Samsung official even though i rooted and changed rom...
Product name is blank, Custom bin download is no, status is custom.
Tried to recover with kies but it complains that it cannot install new firmware (after it downloads the firmware, extracts, and all instruction followed).
Tried with odin (several original roms with my region and the one from kies) but with no luck, odin complains "There is no PIT partition.".
Tried to repartition with GT-I9300_mx_20120329.pit but then it does SET pit and hangs on "Get PIT for Mapping".
Is there any chance to save my phone ? I'm getting really desperate here.
Product name blank = sds. Only samsung service Centre can repair
Sent from my GT-I9300 using Tapatalk 4 Beta
try this
phenixdoc said:
My GT-I9300 international galaxy S3 decided yesterday to brick itself, all of a sudden its stuck at the boot screen (white samsung ... text).
Tried to reboot into recovery but no go, when i hold the buttons it just continues to reboot and reboot, only showing the white text.
Tried to reboot into download and that worked, i though fhew, i got a berak and not all is lost.
In download mode it says current binary Samsung official even though i rooted and changed rom...
Product name is blank, Custom bin download is no, status is custom.
Tried to recover with kies but it complains that it cannot install new firmware (after it downloads the firmware, extracts, and all instruction followed).
Tried with odin (several original roms with my region and the one from kies) but with no luck, odin complains "There is no PIT partition.".
Tried to repartition with GT-I9300_mx_20120329.pit but then it does SET pit and hangs on "Get PIT for Mapping".
Is there any chance to save my phone ? I'm getting really desperate here.
Click to expand...
Click to collapse
Hm, it worked for me once , try connecting it to odin in downlode mode and try installing cmd form there, it should work and help you get your phone back. Since original rom is not working. If that wont work then i am not sure. i need to get a better understand of what you did to it,for the phone to go into brick mode.
a_akash said:
Hm, it worked for me once , try connecting it to odin in downlode mode and try installing cmd form there, it should work and help you get your phone back. Since original rom is not working. If that wont work then i am not sure. i need to get a better understand of what you did to it,for the phone to go into brick mode.
Click to expand...
Click to collapse
No offence, but it's pointless. He has no product name. He needs a replacement Motherboard. It's nothing to do with anything he did.
rootSU said:
Product name blank = sds. Only samsung service Centre can repair
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks, gave it away to a shop, they're gonna try to hardware flash it (JIT/JIP ? i wasn't really listening).
Hello Commiunity,
Before only great forum here because each is helped and I have learned many things.And sorry my english is very bad this is couse why im using google translator.
However, I have a little big problem now.
I tried 4 different custom roms all remain at boot hang. (Boot logo from Rome, not the Samsung sign at the beginning.)
Have it now with odin flashed the original firmware on it but even there it remains exactly hanging on the side.
Have now started three hours time since I'm still eingepennt no boat.
I'm really desperate on the phone because a colleague was and had only loaned: (
Now do not know exactly where but what I find here think that would ever be some info.
MODEL: GT-i9300
FCC ID: A3LGTI9300A
SSN: I9300GSMH
More because I do not also because the system does not boot.
What can I do: <
Maybe help the description why this all happened.
I chilled on facebook yesterday, the phone has started zuflackern as if not enough power longer be an issue.
Then there is ausgegangen.Als I have Angemacht has booted it as the first start time and it was the intro so I have to enter time zone, etc and if I have gmail blah this welcome stuff like that :/
But the phone went off again because it had no battery until I've tried it at home and now write here.
Into the recovery menu and I get into download mode also. Instalieren he does Rome without any problems and without visible Errors.But it always hangs at boot hang (not for the SIII characters)
However, I have tried the recovery menu dan "mount / efs" to press but then comes Error mounting efs.
Does anyone have ideas and can help me or if you need anything else just tell me what you need for info and I look after.
greetz
m1dge2 said:
Hello Commiunity,
Before only great forum here because each is helped and I have learned many things.And sorry my english is very bad this is couse why im using google translator.
However, I have a little big problem now.
I tried 4 different custom roms all remain at boot hang. (Boot logo from Rome, not the Samsung sign at the beginning.)
Have it now with odin flashed the original firmware on it but even there it remains exactly hanging on the side.
Have now started three hours time since I'm still eingepennt no boat.
I'm really desperate on the phone because a colleague was and had only loaned: (
Now do not know exactly where but what I find here think that would ever be some info.
MODEL: GT-i9300
FCC ID: A3LGTI9300A
SSN: I9300GSMH
More because I do not also because the system does not boot.
What can I do: <
Maybe help the description why this all happened.
I chilled on facebook yesterday, the phone has started zuflackern as if not enough power longer be an issue.
Then there is ausgegangen.Als I have Angemacht has booted it as the first start time and it was the intro so I have to enter time zone, etc and if I have gmail blah this welcome stuff like that :/
But the phone went off again because it had no battery until I've tried it at home and now write here.
Into the recovery menu and I get into download mode also. Instalieren he does Rome without any problems and without visible Errors.But it always hangs at boot hang (not for the SIII characters)
However, I have tried the recovery menu dan "mount / efs" to press but then comes Error mounting efs.
Does anyone have ideas and can help me or if you need anything else just tell me what you need for info and I look after.
greetz
Click to expand...
Click to collapse
which f/w did you flash via odin?
sriram231092 said:
which f/w did you flash via odin?
Click to expand...
Click to collapse
I flashed with Odin 3.07.
GT-I9300_mx_20120329.pit
CSC_I9300DBTEMG3_bitstopfen.tar.md5
PDA_I9300XXEMG4_bitstopfen.tar.md5
PHONE_I9300XXEMG4_bitstopfen.tar.md5
[Stock Rom][4.1.2][06.08.2013] I9300XXEMG4 [Germany] [root] [3tlg]
Thank you.
m1dge2 said:
I flashed with Odin 3.07.
GT-I9300_mx_20120329.pit
CSC_I9300DBTEMG3_bitstopfen.tar.md5
PDA_I9300XXEMG4_bitstopfen.tar.md5
PHONE_I9300XXEMG4_bitstopfen.tar.md5
[Stock Rom][4.1.2][06.08.2013] I9300XXEMG4 [Germany] [root] [3tlg]
Thank you.
Click to expand...
Click to collapse
XXEMG4 changes efs format. did you try flashing the latest firmwares like XXMEG5 or XXEMG6?
sriram231092 said:
XXEMG4 changes efs format. did you try flashing the latest firmwares like XXMEG5 or XXEMG6?
Click to expand...
Click to collapse
no idont . can u tell me where i can download the files :*
thank you i will try it.
m1dge2 said:
no idont . can u tell me where i can download the files :*
thank you i will try it.
Click to expand...
Click to collapse
XXEMG5: http://forum.xda-developers.com/showthread.php?t=2383365
XXEMG6: http://www.ibtimes.co.uk/articles/4...xemg6-android412-jellybean-update-release.htm
sriram231092 said:
XXEMG5: http://forum.xda-developers.com/showthread.php?t=2383365
XXEMG6: http://www.ibtimes.co.uk/articles/4...xemg6-android412-jellybean-update-release.htm
Click to expand...
Click to collapse
Heyy
Thank you very much for the links but i doesnt work :<
Any other Ideas ?
Greetz
GT-I9300_mx_20120329.pit
You flashed a PIT my guess is then that you have damaged the partition information table and now require a service centre .
But it is very difficult to read your non English post .