So I've got my hands on the tablet, works great but there is one thing I didn't quite get. Over the bluetooth, a headset/handsfree, when answering a call it turns all the radio off disconecting the tablet from the gsm network, wifi, bluetooth for 2-3 seconds and after everything is back to normal. It doesn't do that when the call is initiated from the tablet, only on answer. I tried a nokia bh 102, nokia bh 214, nokia bh 200, bluetrek st1 and a samsung hs6000 with the same result. When the call is answered without the headset it works with no problems but as soon as I try to connect the headset and transfer the call to the headset, the "radio off" message appears in the status bar and game over. I believe this is a software related issue since the hardware works in other conditions. Could someone give me an advice to what I can do besides getting it to a service? It is rooted so I have access to the root files. Maybe a firmware update or a custom rom? I googled all night for an answer, but no luck.
Related
I successfully paired Cingular8525 with Acura 2007 HandsFreeLink. But after it report successfull pairing, I can not use it. It saying phone not found. I use same phone before with PArot system without any problem.
If you go to Acura web site they report 8125 will not support call waiting and data link, but will support basic phone functions. But it does not work for me. Does anyone succesfully paired 8525 with Acura HandsFreeLink? Is 8525 better then 8125 in list of futures supported by acura?
Thanks
I successfully use the 8525 with my Acura TL's Bluetooth. (Previously used an 8125). It works, but occasionally it will drop the Bluetooth connection. This seems to be a known issue with Bluetooth on the 8525.
BTW To get battery level and signal strength meter on the Acura, you need to get the following program:
http://www.jetwaremobile.com
Mike
I have the same problem with my 2005 BMW 545i. Only stays connected when I leave the screen on. If I hybernate it, I lose bluetooth connection. The Jetware program did not seem to help.
sign up for the jetware beta -- might help
my TL also randomly drops the connection as well.
Question, when you answer an incoming call, does the HFL beep twice? Mine does, and the people on the other line can hear the second beep....
Oh well, just live with it I guess....
Bluetooth Acura paudible Tone problem
Yes, I also get dropped more than occasionally in the Acura bluetooth connection. Any fixes? Another Acura problem for me is that when audible tones are created to SEND tone data replies ( " hit 7 to disconnect"), the last tone in teh sudible series sticks and hangs on for 10 seconds or so. The tone message is sent and recieved, so the call actions continue in the background to the tone. Cingular says hardware and send back phone. Any alternative ideas ,or does everyone else have tone work ok?
Bluetooth Acura audible Tone problem
Yes, I also get dropped more than occasionally in the Acura bluetooth connection. Any fixes? Another Acura problem for me is that when audible tones are created to SEND tone data replies ( " hit 7 to disconnect"), the last tone in the audible series sticks and hangs on for 10 seconds or so. The tone message is sent and recieved, so the call actions continue in the background to the tone. Cingular says hardware and send back phone. Any alternative ideas ,or does everyone else have tone work ok?
this actually worked for me, however, the drain on the battery is siginificant, so if you can live with that, I have gone two weeks now without a dropped call....
http://forum.xda-developers.com/showthread.php?t=247520
When I am playing music and I receive a call, after the call ends the bluetooth connection just disconnects. I have to press the play button on little necklace for it to connect again. Anybody have experience with this headset? My last sony headset, DR-BT30Q, works just fine. My current one that I just ordered, the HBH-DS980, plays fine, but it just disconnects after a phone call.
I searched this forum and "HBH-DS980" didn't pull up any matches. I read in the Kaiser forum some ppl installed some jetware software. I would like to get some input with Mogul owners though. Oh yah, I'm running DCD's 2.1 rom based of 3.16.
WOOT. After installing Jetware mobile, I am not getting a drop after a phone call anymore. Now I'm starting to love this headset.
http://www.jetwaremobile.com/index.htm
Do you get phone book on the headset ?
I'm not sure. I have to check back. But today, after resetting my phone, I am still getting the drop after a call. I have to press the play button and it connects right back up, but still annoying.
I do know I get the call list so that I can make a call.
yes, the contacts work.
Wow, I can't get the contacts to work
You have Mogul /Titan as well ? Any special steps you did to get it working ?
Same problem here with the phone call disconnect
Meh, I assumed they work. Earlier my PPC said allow HBH-ds980 to get contact info, or something like that, so I thught it worked. Now It doesn't do anything. I've found this Bluetooth headset works sometimes and doesn't work at other times. Sometimes off a fresh restart on my PPC it will not drop the connect, most other times it will.
Hi,
I have many problems with this car kit, but let's start with the most annoying :
kit and phone disconnect after every incoming/outgoing call.
If I receive second call when they are in this "disconnect" state, they magically reconnect and sound is routed to car kit (with some 1-2-3 second delay).
The same happens if I dial new outgoing call.
When call finishes - puff - devices disconnect.
Car kit is upgraded to latest firmware in may.
Phone has stock ROM.
I talked to parrot technical support, they keep telling me "try this/try that" - nothing helps.
Any ideas ?
You know the HTC stock roms are buggy.
i do not use a parrot carkit but use another bluetooth carkit
i have to say that custom roms are behaving better, i can also stream music on mine.
have you tried a custom roms? you can always flash back to HTC rom if it does not work
have a look around in the rom developement section
Fixed
Problem was in Bluetooth settings in Topaz.
Somehow, Audio Gateway was "off" by default, and its power saving mode was "off" as well.
I turned both to be "on", and now phone doesn't disconnect from the Parrot after the call.
Battery life seems to be the same as before.
Hi everybody.
Recently I've purchased a new HTC Hero. Everything is working fine and this gadget is by far the better mobile+PDA i've used.
OK, now the question.
I've paired the device with my bluetooth car handsfree (Toyota Prius) and although everything works fine (I can call and receive calls and both battery and coverage meter display OK) caller id is not working. So when I receive a call, instead of displaying call number or name in handsfree, it gives and error (something like "Unable to display").
Does anybody have the same problem?
This happens both with official 2.73 upgrade and modaco 2.2 (2.73 based).
Thanks in advance.
Having problems with the speech feature with my car's bluetooth.
My 920 pairs fine with my car's bluetooth, and I can receive calls fine.
However, the speech feature where it reads incoming text messages is not working. Under Settings > Speech, I've got all the checkboxes checked, and I've tried everything from "Always On" to "Bluetooth and headsets" but nothing works. I receive a text, my phone plays the notification sound, and then nothing.
With my previous WP7.5 device (HTC HD7), this feature worked flawlessly with my car and other bluetooth headsets. Unfortunately I got rid of my headset so I can't test it with my 920.
Interestingly, I once made a call, and while it was still ringing, I got an incoming text message and bam - my phone spoke over the active bluetooth session and prompted me whether I wanted the message read aloud. The call went through and the phone was unable to pickup any commands.
Also, starting a voice command, while my phone is actively paired with my car, the phone can no longer "hear" my voice commands. Like it thinks it initiated the bluetooth session, but in reality it hasn't.
Anyone else having similar problems, or better yet, a solution??
I can only think of something to try out to get a little more information on the scope of the problem.
You could turn it to always on and try sending a text message to the phone while it is not connected via Bluetooth (e.g. at home while having the device on the table) and check wether it works then. If so, then it seems the problem is with the compatibility of the phone and the car's bluetooth.
Hi StevieBallz - gave that a shot and yes, that works. It seems there are some other people with this issue reported on various other sites. Which is a real bummer.
Played around with it some more, and it definitely seems like the phone thinks it has initiated the bluetooth "call" and is reading out commands to nowhere, and unable to hear commands as well.
I would say this is a bug and not mere incompatibility issue. If they had it working fine on WP7.5, there's no reason they couldn't implement it the same way
Given that they are now using the Windows 8 Bluetooth Stack instead of what was there in Windows CE I would say there are several reasons why it's implemented differently but that's not really the point. If there are other people with incompatibility issues that might lead to a fix down the road. The more interesting question though would be if there are Bluetooth pairings where this works with the 920, because if it doesn't work with any Bluetooth devices I guess that would get fixed pretty soon.
I fear I can't give you any more advice than to contact support on your issue so that they get aware of the situation (because I guess Nokia won't be scouting forums for all kinds of possible bugs). I hope they will fix the functionality for you soon.
PS: I can't count the number of times I've seen issues with Bluetooth. No matter what devices I use, Bluetooth still seems very hit and miss Working with the BMW Bluetooth but only partially but working fine in an Audi. Sometimes only with Blackberry, etc. One would believe if there is a standard they would get all this sorted out someday but somehow they don't.
ultrabob said:
I would say this is a bug and not mere incompatibility issue. If they had it working fine on WP7.5, there's no reason they couldn't implement it the same way
Click to expand...
Click to collapse
It works on my car ('10 nissan). It works on some cars/bluetooth stacks, and not others. This, by definition, is a compatibility issue. Now, why this stack fails against other stacks, when the CE stack worked, is a good question.