in need of help - Xperia Z2 Q&A, Help & Troubleshooting

right been sat here trying to figure this out..
ive just unlocked by bootloader so before i start installing roms i thought ill install a custom recovert because that was what i used to do when i was on my other android phones ( ive been on the ios scene for the past 2 years or so)
so my question is how i tried following the guides some even took me to this one click installation .bat files but i dont know if its worked i have tried to reboot to recovery via adb but no luck.
i am confused with the installation guides of kernels someone please link me to some instruction for dummys.
cheers
ps i rooted by phone before i unlocked my bootloader however i didnt do a ta backup is that serious?

shaji007 said:
right been sat here trying to figure this out..
ive just unlocked by bootloader so before i start installing roms i thought ill install a custom recovert because that was what i used to do when i was on my other android phones ( ive been on the ios scene for the past 2 years or so)
so my question is how i tried following the guides some even took me to this one click installation .bat files but i dont know if its worked i have tried to reboot to recovery via adb but no luck.
i am confused with the installation guides of kernels someone please link me to some instruction for dummys.
cheers
ps i rooted by phone before i unlocked my bootloader however i didnt do a ta backup is that serious?
Click to expand...
Click to collapse
you need to use the installer for Z2 only and you need all drivers installed with the correct adb files
all can be found at developer.sonymobile.com
there is a info thread at the top of the QnA section, you may find ways to recover your device there

Envious_Data said:
you need to use the installer for Z2 only and you need all drivers installed with the correct adb files
all can be found at developer.sonymobile.com
there is a info thread at the top of the QnA section, you may find ways to recover your device there
Click to expand...
Click to collapse
thanks for the reply. I think I have done everything correctly. however one major problem I been trying to install a recovery partition and I installed [sirius][CWM Advanced Edition] PhilZ Touch {UNOFFICIAL} [20140528] using the fastboot flash recovery method which resulted in an ok but for some i cant seem to go into it, ive tried adb reboot recovery it just boots up like normal and pressing the up button during boot.
have I installed it right?

shaji007 said:
thanks for the reply. I think I have done everything correctly. however one major problem I been trying to install a recovery partition and I installed [sirius][CWM Advanced Edition] PhilZ Touch {UNOFFICIAL} [20140528] using the fastboot flash recovery method which resulted in an ok but for some i cant seem to go into it, ive tried adb reboot recovery it just boots up like normal and pressing the up button during boot.
have I installed it right?
Click to expand...
Click to collapse
xperias dont have native recovery partitions, installing to recovery partition does nothing.
recoveries for Unlocked bootloaders are stored in the ramdisk in the kernel
for locked bootloaders i do belive a small script it modded in the kernel, the recovery image is put in your /system/
what you tried installing is a custom kernel with the recovery image inside, try installing to your boot after unlocking your bootloader(if you want to which voids your warrenty)

Thanks to your explanation and a bit of research I have succeeded. Running cyonogenmod 11 now thanks bud!
Sent from my Xperia Z2 using XDA Free mobile app

Related

[Q] Unable to unlock bootloader

I have used windroid htc one x+ toolkit to unlock bootloader.
It shows a dialogue saying bootloader is unlocked . But in the phone it still shows a locked screen and also showing as s-off
I have root and i am able to use titanium backup.
I have also tried to flash twrp recovery.. but not able to do so.
Can somebody please point me in the right direction..
tonysimonhere said:
I have used windroid htc one x+ toolkit to unlock bootloader.
It shows a dialogue saying bootloader is unlocked . But in the phone it still shows a locked screen and also showing as s-off
I have root and i am able to use titanium backup.
I have also tried to flash twrp recovery.. but not able to do so.
Can somebody please point me in the right direction..
Click to expand...
Click to collapse
Try manually follow the instructions from htcdev and let us know which part fails........
[email protected] said:
Try manually follow the instructions from htcdev and let us know which part fails........
Click to expand...
Click to collapse
Thank you ..
I was able to flash twrp using Rom toolbox.
now I have twrp but the bootloader still shows as locked.
I tried to install a custom Rom but failed because of my own mistake.. today I will try once more to flash a Rom.
will post it's result..
I think I read somewhere that soff devices can't be unlocked..is this true
tonysimonhere said:
Thank you ..
I was able to flash twrp using Rom toolbox.
now I have twrp but the bootloader still shows as locked.
I tried to install a custom Rom but failed because of my own mistake.. today I will try once more to flash a Rom.
will post it's result..
I think I read somewhere that soff devices can't be unlocked..is this true
Click to expand...
Click to collapse
I dont think so....
Can u try using HTC dev and report back....
NOTE UNLOCKING WILL WIPE ALL UR DATA AND SDCARD STUFF FROM UR PHONE....
SO BACKUP
[email protected] said:
I dont think so....
Can u try using HTC dev and report back....
NOTE UNLOCKING WILL WIPE ALL UR DATA AND SDCARD STUFF FROM UR PHONE....
SO BACKUP
Click to expand...
Click to collapse
Sure I will try it in the evening.
You can definitely Unlock it using the HTCDEV process , I have a done this. Any ways if you are able to flash a ROM then there is no reason to get it Unlocked, more over S-OFF gives you full control over the device but again it also increases the risk of getting your phone bricked so make sure you use it wisely (knowing what you flash) , so I will say why to beg HTC for some thing they have already provided.
One more thing S-OFF device means you dont need to flash boot.img separately so you dont need to use your PC to flash roms no more.
Waiting to know about your progress on flashing the ROM ..
ethanon said:
You can definitely Unlock it using the HTCDEV process , I have a done this. Any ways if you are able to flash a ROM then there is no reason to get it Unlocked, more over S-OFF gives you full control over the device but again it also increases the risk of getting your phone bricked so make sure you use it wisely (knowing what you flash) , so I will say why to beg HTC for some thing they have already provided.
One more thing S-OFF device means you dont need to flash boot.img separately so you dont need to use your PC to flash roms no more.
Waiting to know about your progress on flashing the ROM ..
Click to expand...
Click to collapse
I have now successfully flashed a Rom..initially I tried it without flashing the boot.img and it entered a boot loop.
Then I installed flashify and flashed boot.img that came with the Rom. Then the Rom is working now.
The boot loader is still locked. Has twrp .
tonysimonhere said:
I have now successfully flashed a Rom..initially I tried it without flashing the boot.img and it entered a boot loop.
Then I installed flashify and flashed boot.img that came with the Rom. Then the Rom is working now.
The boot loader is still locked. Has twrp .
Click to expand...
Click to collapse
so you mean to say you failed to install the boot.img from the custom recovery ? well that is weird, one more thing since you were in boot loop how did you manage to install flashiffy !
if you may please include the complete flashing steps , will be helpful for my experiments.
ethanon said:
so you mean to say you failed to install the boot.img from the custom recovery ? well that is weird, one more thing since you were in boot loop how did you manage to install flashiffy !
if you may please include the complete flashing steps , will be helpful for my experiments.
Click to expand...
Click to collapse
Initially I flashed the Rom alone and it went into bootloop and all buttons became unresponsive .so I waited till the battery ran out and the phone switched off. Then I recharged , entered recovery by vol down + power button.. I had the backup there . So I restored back up.. then phone rebooted normally.. and I flashed boot.img by flashify just because I didn't know any other method... Then from recovery I wiped dalvik cache and system .. flashed the new Rom.. reeboot and fine..
Feel free to ask for any more clarification..

[Q] A small question about flashing cm 12

Hi, everyone, I just got my z3 tablet and I am in love with it except i don't like the interface. So i decide to root my tablet without unlocking the bolted and I did made it and i did install TWRP. I have a question, since I have TWRP is it possible for me to install cm 12 rom or I need to have a unlock boot loader in order to install it?
Sorry for my bad english and thank you for answering my questions.
kokorolove said:
Hi, everyone, I just got my z3 tablet and I am in love with it except i don't like the interface. So i decide to root my tablet without unlocking the bolted and I did made it and i did install TWRP. I have a question, since I have TWRP is it possible for me to install cm 12 rom or I need to have a unlock boot loader in order to install it?
Sorry for my bad english and thank you for answering my questions.
Click to expand...
Click to collapse
You need to unlock to flash a custom kernel which would be needed by the cm12 to run. So first.
1.Backup drm keys
2.Unlock BL
3. Flash CM kernel via fastboot
4. Flash CM Rom via recovery.
Sent from my SGP621 using XDA Free mobile app
I just bought a Z3 tablet compact, which should be here at the end of next week. I haven’t found a tutorial which includes all steps to get from the standard rom to CM12. Did I miss any steps or does the following steps include everything?
Root tablet on the original Sony rom
Backup TA partition (I guess that's where the DRM keys are?)
Unlock bootloader
Flash a recovery (any recommendations?) I found this tutorial, but I only need one recovery and I don’t want to flash that zip every time I install a new rom.
Flash CM12. Are there any kernels beside that one included in the CM12 zips?
Cyberratchet said:
I just bought a Z3 tablet compact, which should be here at the end of next week. I haven’t found a tutorial which includes all steps to get from the standard rom to CM12. Did I miss any steps or does the following steps include everything?
Root tablet on the original Sony rom
Backup TA partition (I guess that's where the DRM keys are?)
Unlock bootloader
Flash a recovery (any recommendations?) I found this tutorial, but I only need one recovery and I don’t want to flash that zip every time I install a new rom.
Flash CM12. Are there any kernels beside that one included in the CM12 zips?
Click to expand...
Click to collapse
I guess you should just flash the kernel via fastboot after unlocking the bootloader, that would eliminate the need to flash a recovery. It's hitting 2 birds and one stone and besides CM uses a different kernel than stock so later you would really need to flash kernel.
Sent from my SGP621 using XDA Free mobile app
Thanks for your reply. The whole flashing procedure is a lot more complicated than on my S3, so I have a follow-up question.
Should I just backup the TA partition, unlock the tablet, flash this kernel which should give me root and TWRP and then flash another recovery and CM12?
I found this recovery which is only semi-permanent, because you have to flash it before you upgrade/install a new CM12 version. It’s not big deal tbh, but is there a permanent recovery, which I only have to install once.
I'm also curious about this.
Right now, I'm trying to download the Flashtool program from Sony, but apparently, you need to "register" for it. Where did you guys download your Flashtool from?
Cyberratchet said:
Thanks for your reply. The whole flashing procedure is a lot more complicated than on my S3, so I have a follow-up question.
Should I just backup the TA partition, unlock the tablet, flash this kernel which should give me root and TWRP and then flash another recovery and CM12?
I found this recovery which is only semi-permanent, because you have to flash it before you upgrade/install a new CM12 version. It’s not big deal tbh, but is there a permanent recovery, which I only have to install once.
Click to expand...
Click to collapse
Correct, make sure the kernel is compatible with CM
Sent from my SGP621 using XDA Free mobile app
The whole procedure is really frustrating, maybe someone can help me here.
I did a backup of the TA partition and unlocked the bootloader. I tried flashing the boot.img from the cm.zip, but I have no idea how to flash the rom via the cm-recovery.
Flashing the advanced kernel to get TWRP wasn’t successful as well. I tried the fastboot mode of the Flashtool and flashed the kernel, but nothing changed.
Can someone post a brief guide with the next steps to get CM12 running (with cmd commands pls)?
EDIT: I just tried to use “adb sideload” in the CM recover, but “adb devices” doesn’t show the tablet .
EDIT2: EDIT: Seems like I got it to work after all. The DualRecover Installer worked, even without SuperSU installed.
Cyberratchet said:
The whole procedure is really frustrating, maybe someone can help me here.
I did a backup of the TA partition and unlocked the bootloader. I tried flashing the boot.img from the cm.zip, but I have no idea how to flash the rom via the cm-recovery.
Flashing the advanced kernel to get TWRP wasn’t successful as well. I tried the fastboot mode of the Flashtool and flashed the kernel, but nothing changed.
Can someone post a brief guide with the next steps to get CM12 running (with cmd commands pls)?
EDIT: I just tried to use “adb sideload” in the CM recover, but “adb devices” doesn’t show the tablet .
EDIT2: EDIT: Seems like I got it to work after all. The DualRecover Installer worked, even without SuperSU installed.
Click to expand...
Click to collapse
I ran into the same problem usin the cm12 nightlies from 27th march 2015:
Sideloading would not work because the tablet is not recognized by the computer. I tried with Windows 7 and gentoo Linux.
Installing from the sd-card in recovery mode was also not possible due to a error of missing "/misc".
I solved the problem by manually choosing the driver in Windows 7. I booted the tablet into recovery. Choose update using adb as detailed in this post:
http://forum.xda-developers.com/z3-...t/root-root-locked-bootloader-sgp621-t3013534
Then I found the device in the windows device manager. Here I manually choose the adb driver that I installed earlier from the flashtool package. After that the device was correctly recognized by Windows and I could Sideloade the cm12 image.

[Q] Root Xperia with Lollipop?

Hi, I'm kind of a noob, so sorry if this is a dumb question.
I just installed the new Lollipop Fimware on my Z2, using Flashtool. Now I want to root the device, but reading through articles on XDA or XperiaBlog, they all said you need to use older firmware. So my question is, can you root the Z2 with Lollipop?
I'd be grateful for helpful answers.
ICripzHD said:
Hi, I'm kind of a noob, so sorry if this is a dumb question.
I just installed the new Lollipop Fimware on my Z2, using Flashtool. Now I want to root the device, but reading through articles on XDA or XperiaBlog, they all said you need to use older firmware. So my question is, can you root the Z2 with Lollipop?
I'd be grateful for helpful answers.
Click to expand...
Click to collapse
Things needed:
PC, fastboot driver, know how to boot to bootloader(fastboot mode) and recovery mode
Now you can without having old kernel (not firmware)
go to http://forum.xda-developers.com/xperia-z2/development/kernel-andropluskernel-v10-t2974841 extract boot.img from the zip file.
Boot your phone to fastboot mode and in command:
Code:
fastboot flash boot boot.img
Go to recovery mode after restarting and then get UPDATE-SuperSU-v2.46.zip and flash it via newly installed TWRP recovery.
themightydeity said:
Things needed:
PC, fastboot driver, know how to boot to bootloader(fastboot mode) and recovery mode
Now you can without having old kernel (not firmware)
go to http://forum.xda-developers.com/xperia-z2/development/kernel-andropluskernel-v10-t2974841 extract boot.img from the zip file.
Boot your phone to fastboot mode and in command:
Code:
fastboot flash boot boot.img
Go to recovery mode after restarting and then get UPDATE-SuperSU-v2.46.zip and flash it via newly installed TWRP recovery.
Click to expand...
Click to collapse
And for locked bootloaders it is a different story
HellRoot said:
And for locked bootloaders it is a different story
Click to expand...
Click to collapse
Yep totally different story.
So there's no way yet for locked bootloaders?
themightydeity said:
Things needed:
PC, fastboot driver, know how to boot to bootloader(fastboot mode) and recovery mode
Now you can without having old kernel (not firmware)
go to http://forum.xda-developers.com/xperia-z2/development/kernel-andropluskernel-v10-t2974841 extract boot.img from the zip file.
Boot your phone to fastboot mode and in command (how ?) :
Code:
fastboot flash boot boot.img
Go to recovery (how? which recovery ? there is one installed by default?) mode after restarting and then get UPDATE-SuperSU-v2.46.zip and flash it via newly installed TWRP recovery (what ?).
Click to expand...
Click to collapse
Thats a terribly bad answer right ? I've rooted another devices but but can't undestand almost a thing of the process you just posted.
Imagine for the noob dude ?
zeehkaev said:
Thats a terribly bad answer right ? I've rooted another devices but but can't undestand almost a thing of the process you just posted.
Imagine for the noob dude ?
Click to expand...
Click to collapse
Same here. I'm a noob wanting to learn how to root. But this went over my head :/
Would using PRF creator work? If you bundled the lollipop firmware with supersu.zip and flashed it would it give you lolipop with root? Because this is what i did to update to 4.4.4 with root. For anyone that doesnt know PRF creator is a program which combines 3 files which is are firmware of your choice, a superSU.zip and a recovery.zip. It combines them into a .zip that you can flash in recovery and have the firmware with superSU and a custom recovery on it.
I have a locked bootloader and mines rooted, do you want me to say how?
If its on lollipop, i would very much like to know how.
Isn't this the exact same answer as rooting 4.4.4?
Downgrade to 4.4.2
Root
Install recovery
Install rooted lollipop zip in recovery
If you don't understand this or the method posted above don't root. Also, if.you can't google things like fastboot to understand what it is don't root.
K-NineHD said:
I have a locked bootloader and mines rooted, do you want me to say how?
Click to expand...
Click to collapse
it would be kindly appreciated!
Bootloop
Everything was fine, till i tried superSU. Twrp flashed it fine, but then when i tried to reboot, the device got stuck in a bootloop.
wipe cache/delvik also didnt help.
I have a new z2, then unlocked the bootloader, and then got the Norway rom using xperifirm.
Norway rom installed fine. twrp installed fine. But i am facing a bootloop now that i have flashed UPDATE-SuperSU-v2.46.zip
Anybody else face this issue?
0charbless said:
Everything was fine, till i tried superSU. Twrp flashed it fine, but then when i tried to reboot, the device got stuck in a bootloop.
wipe cache/delvik also didnt help.
I have a new z2, then unlocked the bootloader, and then got the Norway rom using xperifirm.
Norway rom installed fine. twrp installed fine. But i am facing a bootloop now that i have flashed UPDATE-SuperSU-v2.46.zip
Anybody else face this issue?
Click to expand...
Click to collapse
try wiping just "Dalvik Cache" and restart again. I have also face similar strange issue when I was using FlashTool a couple of times.
If that doesn't work try normal wiping from TWRP and install firmware using FlashTool.
themightydeity said:
try wiping just "Dalvik Cache" and restart again. I have also face similar strange issue when I was using FlashTool a couple of times.
If that doesn't work try normal wiping from TWRP and install firmware using FlashTool.
Click to expand...
Click to collapse
Thanks. I tired wiping , but it didnt work.
I just reflashed with 17.x firmware, and upgraded using the rooted rom "D6503_Customized BAL_1282-0827_23.1.A.0.690_R3C_SuperSU_XZDR2.8.3"
ICripzHD said:
Hi, I'm kind of a noob, so sorry if this is a dumb question.
I just installed the new Lollipop Fimware on my Z2, using Flashtool. Now I want to root the device, but reading through articles on XDA or XperiaBlog, they all said you need to use older firmware. So my question is, can you root the Z2 with Lollipop?
I'd be grateful for helpful answers.
Click to expand...
Click to collapse
Hi,
FIRST: you need to downgrade your phone
http://forum.xda-developers.com/showthread.php?t=2759934
Flash it using FLASHTOOL
SECOND: Root your phone
http://forum.xda-developers.com/showthread.php?t=2783750
THIRD: Install Recovery for flashing zip ROMs
http://forum.xda-developers.com/showthread.php?t=2785598
FOURTH: Use this to flash Lollipop
http://forum.xda-developers.com/xperia-z2/development/stock-d6503-23-1-0-690-bal-rooted-t3057150
Just make sure you follow all the steps and you're good.
[CREDITS]
Credits goes to all OP of the Threads
Please press THANKS if this helped you.
yavhin said:
Hi,
FIRST: you need to downgrade your phone
http://forum.xda-developers.com/showthread.php?t=2759934
Flash it using FLASHTOOL
SECOND: Root your phone
http://forum.xda-developers.com/showthread.php?t=2783750
THIRD: Install Recovery for flashing zip ROMs
http://forum.xda-developers.com/showthread.php?t=2785598
FOURTH: Use this to flash Lollipop
http://forum.xda-developers.com/xperia-z2/development/stock-d6503-23-1-0-690-bal-rooted-t3057150
Just make sure you follow all the steps and you're good.
[CREDITS]
Credits goes to all OP of the Threads
Please press THANKS if this helped you.
Click to expand...
Click to collapse
I'm no Android/Lollipop/Rooting expert but using an unlocked boot loader I was able to root Lollipop (23.1.A.0.690 ) easily using the kernel from:
http://forum.xda-developers.com/xpe...ot-stock-flashable-kernel-23-1-0-690-t3061816
My steps were:
1. Install Lollipop
2. fastboot flash boot boot.img (to install above mentioned kernel with TWRP recovery)
So far so good.
PS: To use fastboot you'll likely need the drivers from flashtool (http://www.flashtool.net/index.php) and if on Win 8.1 you'll need to search for instructions on how to install unsigned drivers.
ICripzHD said:
Hi, I'm kind of a noob, so sorry if this is a dumb question.
I just installed the new Lollipop Fimware on my Z2, using Flashtool. Now I want to root the device, but reading through articles on XDA or XperiaBlog, they all said you need to use older firmware. So my question is, can you root the Z2 with Lollipop?
I'd be grateful for helpful answers.
Click to expand...
Click to collapse
check out my tutorial if you need help https://www.youtube.com/watch?v=0msKcElz3Ow
tfcarlin said:
and if on Win 8.1 you'll need to search for instructions on how to install unsigned drivers.
Click to expand...
Click to collapse
If you're not on mobile, you can check out my signature to disable signed driver enforcement for windows 8 and 8.1. It sticks after reboots too.
yavhin said:
Hi,
FIRST: you need to downgrade your phone
http://forum.xda-developers.com/showthread.php?t=2759934
Flash it using FLASHTOOL
SECOND: Root your phone
http://forum.xda-developers.com/showthread.php?t=2783750
THIRD: Install Recovery for flashing zip ROMs
http://forum.xda-developers.com/showthread.php?t=2785598
FOURTH: Use this to flash Lollipop
http://forum.xda-developers.com/xperia-z2/development/stock-d6503-23-1-0-690-bal-rooted-t3057150
Just make sure you follow all the steps and you're good.
[CREDITS]
Credits goes to all OP of the Threads
Please press THANKS if this helped you.
Click to expand...
Click to collapse
Is there root only for Baltic ROM? I am on Nordic and I want root is that possible?

[Z2,Z3] Root and recovery stock 5.1.1 264 ROM no data loss - proper easy way

Rooting and romming Sony devices is a little harder than most android devices, some things work a little different. The scattered info doesn't make this any easier either. I had to find this out the hard way, softbricked my Xperia in the process, but I finally did it. I see that there still are people that wish to root stock 5.1.1 and that there are no unified proper instructions to do this so here is my process and guide. Good luck.
There are many ways to do this, but it includes flashing your Xperia to earlier firmware then rooting and installing the recovery and then flashing back the newest firmware, so I made this little guide to make things easier for Sony newcomers. This process should be compatible with Z1, Z2 and Z3(c) - but ofcourse its made for Z2, for Z1 and Z3 download recovery files for your model respectively.
You won't loose any of your data on your stock ROM if you do this correctly.
You'll need a Windows PC, 7, 8.1, 10. (Mac and Linux are also supported)
1. Root your Z with Kingroot.apk v4.6 and v4.8 work flawlessly. Just download and install as normal apk and hit the big blue button. You have to have internet connection for this to work. It will root your Z automatically after cca. 2m.
Kingroot app is basically a super su app from a different developer. Congrats, you now have root.
2. To install a recovery do not use any flashing apps by TWRP or similar, it wont work. We will use XDZR.
XZDR is Xperia Z Dual Recovery, its basically Philz recovery and TWRP recovery flashed together. You enter Philz holding vol up and TWRP holding vol down when powering up your xperia. * Search for NUT's dual recovery for more info.
Download the recovery from here:
http://nut.xperia-files.com/path/XZDualRecovery
(Download the correct .zip for your Xperia model).
3. Download the. zip to your PC.
4. Connect your phone via USB after you have enabled USB debugging on your xperia. If you have correct Sony drivers installed your PC will recognize your device and a dialog will pop up on your phone (about allowing USB debugging from this PC). Allow the access.
5. Unpack the zip you downloaded to a random folder on your PC. Here run the install.bat if you're on a Win PC. Bat will run and here you just choose the first option, type 1 and follow the on screen instructions, keep an eye on your phone, it will pop up a couple of yes - no dialogs. Allow the access and ADB access and wait, it will be fast.
When you reboot you will see a green LED light up while SONY splash is shown, this is when you hold up or down for one of the two recoveries.
Down is for TWRP and up is for Philz.
6. Download superSU from here:
https://download.chainfire.eu/696/SuperSU/
Boot to system again and now you can unroot your phone trough Kingroot app (general settings) and then reboot to recovery again and flash the file from this link, you will get the super su app and super su binaries and this way you're fully rooted and will have dual recovery for your full flashing pleasure.
* Remember that you first need to unroot and uninstall Kingroot app and then flash Super su, otherwise you risk a bootloop or just not functional root access.
* Do not flash newer TWRP or any recovery or youll loose your recovery.
* I am not responsible if something goes wrong with your device.
And thats it, you have your data intact, stock 5.1.1 ROM, fully functional root access with super su and two recoveries, intact BL and DRM keys and you can flash almost anything that supports LB (locked bootloader).
Hey.
I have a few questions.
Does installing recovery void the warranty? Can the XZDualRecovery be uninstalled easily? Can I still update to Marshmallow via official update when it comes out when I have recovery installed on my phone?
Thanks!
cha0zine said:
Hey.
I have a few questions.
Does installing recovery void the warranty? Can the XZDualRecovery be uninstalled easily? Can I still update to Marshmallow via official update when it comes out when I have recovery installed on my phone?
Thanks!
Click to expand...
Click to collapse
I think that Sony does void warranty if you do an "unauthorized software changes" and changing software in any other way than trough OTA is unauthorized by Sony, so yes. But you can completely restore your device to factory state by flashing an official FTF image trough flashtool and restore Sonys recovery and basically get your warranty back.
If you follow the above steps installation of XZDR is quite easy and fast.
You will be able to update to official MM by flashing MM FTF image trough flashtool and restore your phone to "official" software state. But with XZD recovery you will be able to flash leaked MM from beta program even sooner and easier.
This guide does not unlock your BL and does nothing irreversible to your phone * providing you do everything correctly.
Thanks for answering! Much appreciated!
can you back up the drm keys through this method?
jeebarbas said:
can you back up the drm keys through this method?
Click to expand...
Click to collapse
Rooting with this method wont unlock your boot loader so there is no need for that, your DRM keys wont be touched.
5ageman said:
Rooting with this method wont unlock your boot loader so there is no need for that, your DRM keys wont be touched.
Click to expand...
Click to collapse
Thank you for replying. sorry, im such a noob but after flashing su and subinaries do i need to update the su binaries or i could jsut leave it as it is?
jeebarbas said:
Thank you for replying. sorry, im such a noob but after flashing su and subinaries do i need to update the su binaries or i could jsut leave it as it is?
Click to expand...
Click to collapse
You can leave it as is, you will have full root functionality. Of course you can also update binaries to have up to date bug fixes and security patches, update trough normal method works fine.
@5ageman Hi. Thanks for the tutorial. I m a noob in this rooting stuff. Last night i rooted my phone Xperia Z2 5.1.1 using kingroot bcos i was scared of rooting with some other steps and bricking my phone. But then i realized that xposed wont install unless i have custom recovery. But i m quiet confused with few things related to root even after reading so many posts. So just need to know what exactly recovery is. Like when i restart my phone and then press vol up or down key what will exactly happen? Is this something like safe mode and some other mode in laptops??
talkativetaurus said:
@5ageman Hi. Thanks for the tutorial. I m a noob in this rooting stuff. Last night i rooted my phone Xperia Z2 5.1.1 using kingroot bcos i was scared of rooting with some other steps and bricking my phone. But then i realized that xposed wont install unless i have custom recovery. But i m quiet confused with few things related to root even after reading so many posts. So just need to know what exactly recovery is. Like when i restart my phone and then press vol up or down key what will exactly happen? Is this something like safe mode and some other mode in laptops??
Click to expand...
Click to collapse
Recovery is actually closest to BIOS in PC terms although its much more. Xperia Z2 has no recovery by default, you'll need to flash it manually. See step 2. And only then you can eter recovery. By pressing vol down when the green LED lights up you will enter TWRP a custom recovery made by Team Win Recovery Project. Nothing will happen if you do nothig, you wont accidentaly wipe or brick your Z2. If unsure what to do next just tap the reboot button and then system to reboot to system as nothing happened. Go step by step, no hurry.
@5ageman thanks alot for ur answer. Now my doubt is clear.
But i have few more questions related to ur tut.
1- i have already rebooted my phone a number of times after rooting it. Like for some other purpose and not for recovery or super su. So will the tut work for me as i read somewhere that one need not restart the phone after rooting using kingroot and install recovery directly. Or if it was for some other device i dont remember.
2 - According to the end of step 5 and step 6, does that mean that i have to download super su from chainfire while i m still in recovery mode? And once agn in the system after uninstalling kingroot and rebooting in recovery do i have to install SuperSU in the recovery mode? If yes then how?
3- last question. Entering recovery is just vol down button or power + vol down both.
Once again sorry for such basic questions but i m completely new in the world of rooting plus i want to make sure i know what i m doing.
Thanks for ur patience. Appreciate.
talkativetaurus said:
@5ageman thanks alot for ur answer. Now my doubt is clear.
But i have few more questions related to ur tut.
1- i have already rebooted my phone a number of times after rooting it. Like for some other purpose and not for recovery or super su. So will the tut work for me as i read somewhere that one need not restart the phone after rooting using kingroot and install recovery directly. Or if it was for some other device i dont remember.
2 - According to the end of step 5 and step 6, does that mean that i have to download super su from chainfire while i m still in recovery mode? And once agn in the system after uninstalling kingroot and rebooting in recovery do i have to install SuperSU in the recovery mode? If yes then how?
3- last question. Entering recovery is just vol down button or power + vol down both.
Once again sorry for such basic questions but i m completely new in the world of rooting plus i want to make sure i know what i m doing.
Thanks for ur patience. Appreciate.
Click to expand...
Click to collapse
1. You cannot install recovery directly from the system on Z2 like on other phones, Z2 has no recovery partition. This can only be done with unlocked bootloader. Just make sure you have a working root access with Kingroot and USB debugging enabled when you connect your Z2 to a PC.
2. Download superSU from chainfire while still in system, then reboot to recovery and flash it trough recovery. It's a flashable zip. Before booting to recovery unroot your phone trough Kingroot app. SuperSU zip will flash su binaries and the app to system partition automatically and will root your phone again. Rooting trough Kingroot is done only to flash the recovery, then its deleted.
3. After you successfully install tge recovery when you power on your Z2 it will vibrate and flash green LED on sony bios logo. Then you hold down vol down key until led flashes purple. Afterward it will boot to recovery.
5ageman said:
1. You cannot install recovery directly from the system on Z2 like on other phones, Z2 has no recovery partition. This can only be done with unlocked bootloader. Just make sure you have a working root access with Kingroot and USB debugging enabled when you connect your Z2 to a PC.
2. Download superSU from chainfire while still in system, then reboot to recovery and flash it trough recovery. It's a flashable zip. Before booting to recovery unroot your phone trough Kingroot app. SuperSU zip will flash su binaries and the app to system partition automatically and will root your phone again. Rooting trough Kingroot is done only to flash the recovery, then its deleted.
3. After you successfully install tge recovery when you power on your Z2 it will vibrate and flash green LED on sony bios logo. Then you hold down vol down key until led flashes purple. Afterward it will boot to recovery.
Click to expand...
Click to collapse
@5ageman Thanks for ur reply. but i have few more things to say..
1- no i didnt mean in the system. What i read was that when u root with kingroot u r nt suppose to reboot until u install recovery. Otherwise it might cos prbs and nt install SuperSU.
2- What does flashable exactly mean. Is it nt just installing? I dload the superSU from chainfire while in the system and install in the recovery, right? Where will i find the zip to install it? (sorry... Had to ask)
3- i think i got that...i ll knw that exactly when i try it...lol
talkativetaurus said:
@5ageman Thanks for ur reply. but i have few more things to say..
1- no i didnt mean in the system. What i read was that when u root with kingroot u r nt suppose to reboot until u install recovery. Otherwise it might cos prbs and nt install SuperSU.
2- What does flashable exactly mean. Is it nt just installing? I dload the superSU from chainfire while in the system and install in the recovery, right? Where will i find the zip to install it? (sorry... Had to ask)
3- i think i got that...i ll knw that exactly when i try it...lol
Click to expand...
Click to collapse
1. You wont face any issues if you reboot, but you dont have to. Just plug your phone to PC while your phone is in android. Yes you download in system and then install - flash in recovery by tapping "install" and then you navigate to supersu.zip and select it and then swipe to flash it. The supersu.zip will be there where you download it, most likely on internal storage in download folder.
2. Flashable means its installed trough recovery - its flashed as opposed to being installed normally in android system.
So is it safe to root my Z2 with this? I have 15.1.1 264 stock rom, is this safe?
nemanja899 said:
So is it safe to root my Z2 with this? I have 15.1.1 264 stock rom, is this safe?
Click to expand...
Click to collapse
If you follow the guide correctly and know basic android rooting and romming then yes its safe, I rooted my Z2 the same exact way. 5.1.1 264

Help me unbrick

Im the most stupid person alive because
I didn't unlock my bootloader
I installed xzrecovery witch is a app that installs twrp
Then in twrp i wiped every thing
Then I tried to install a rom witch didn't work
Then i trend the phone off when i tried to do so twrp said your device is not rooted do you want to install super su i said yes the phone is now stuck on sony logo
Pliz help
aliamiri70007 said:
Im the most stupid person alive because
I didn't unlock my bootloader
I installed xzrecovery witch is a app that installs twrp
Then in twrp i wiped every thing
Then I tried to install a rom witch didn't work
Then i trend the phone off when i tried to do so twrp said your device is not rooted do you want to install super su i said yes the phone is now stuck on sony logo
Pliz help
Click to expand...
Click to collapse
You wiped everything and now there is no rom installed so its not going past the sony logo. You have two options.
1. Unlock bootloader if you want to run a custom rom.
2. Flash stock rom to go back to stock.
and how to flash stock rom , you need to have the flashtool , put your phone in donwloadmode ( volumne down + plug in the usb cable ) and then flash the stock rom of sony ( you can find the method on how to do it on google ) its simple and then you decide out of 2 options above from last post
Since your bootloader isn't unlocked your can use Sony Companion Software to repair your phone. When you click update there is a repair option. Select repair and hook up the phone in flashmode. Make sure your ZU is atleast 50% charged.
thanks for replying everyone i tried the flashtool stock rom installation and i got boot loop now i tried two different ftf files but they both result in boot loop what am i doing wrong?
aliamiri70007 said:
thanks for replying everyone i tried the flashtool stock rom installation and i got boot loop now i tried two different ftf files but they both result in boot loop what am i doing wrong?
Click to expand...
Click to collapse
can you flash the stock rom again and copy paste the log here in a code quote like this one:
Code:
write here
And what is your model? C6833 etc..
What stock rom did you download?
Which drivers did you use?
And which version of flashtool did you use?
And lastly what settings did you use when flashing the stock rom? All options included so ALL partitions being flashed. And none excluded.
Screenshots is always good help .
for locked bootloader http://support.sonymobile.com/fr/xperia-companion/
for unlocked bootloader https://developer.sonymobile.com/open-devices/flash-tool/
Thanks I didn't check the wipe section wich causes bootloader thanks again to everyone who helped
aliamiri70007 said:
Thanks I didn't check the wipe section wich causes bootloader thanks again to everyone who helped
Click to expand...
Click to collapse
You're welcome

Categories

Resources