Related
Hey Everyone, I purchased this real cheap tablet from ebay a 7" A13 MID tablet (OEM), and was wondering if anyone knows anything about these tablets. I keep getting a FC error and would like to just wife the device and install a custom ICS rom to it.
Any assistance or info would be greatly appreciated. Thank you in advance for any help you can offer!
I also have a generic A13 MID tablet with ICS 4.03. It would be cool if someone created a CM9 rom for this soc. So far I only found this ROM here but I haven't tried it yet.
Thank you for the information, is there any info on how to install a custom rom on these devices?
Description is in that link, you need to use Live suite 1.09 (google it) and a valid image.
Thank you, I am going to give it a try.
a13
jfarhat said:
Thank you, I am going to give it a try.
Click to expand...
Click to collapse
You said you were going to have a try. Have you flased it yet? Plz post back. I need to flash mine too. need some expert advice..
horzz said:
You said you were going to have a try. Have you flased it yet? Plz post back. I need to flash mine too. need some expert advice..
Click to expand...
Click to collapse
Yeah, I tried it and it did not work. The ROM does not support the touch screen on the device. But in the thread, I found a lot of people that had this same problem. So, you will find there links to five other ROM that may work for you. I tried two of them and one of them the touch screen was slightly response, on my second ROM I got fully touch screen functionality. It seems to work well and better than the original ROM on the tablet. No forced close etc.... I have not tried the other ROMs yet, I might in the next few weeks.
the ROM that worked for me was the eliveupdate one. I have not yet tried the Teclast_p76TI-r1-3_4.03_GAPPS_r2 nor Teclast_p76TI-r4_4.03_GAPPS_r2. Also I have not yet tried the Tragidy-A13-Hyper-Jelly-404C-Mali.
I forget the name of the file that did not work but it started out with something like "soni----------". I already delete that file from my computer.
it is worth changing the ROM, the original ROM sucks big time and constantly would have errors, now the device is usable. While it is a low end device with low end specs.....it is a great device for my son (6 yrs old) and now it is fully functional without any errors popping up.
good luck!
momo stuff
jfarhat said:
Yeah,...... without any errors popping up.....good luck!
Click to expand...
Click to collapse
thanks.. but i already flashed it!! Was too curious..my first flash!
Every thing worked fine.. but the touch screen is responding in a reversed manner!! Suppose i touch the left, its sensing the right, n so on!
I am going to give a try to the others too.. n specially that you are using now.. are the sensors working on it fine??
horzz said:
thanks.. but i already flashed it!! Was too curious..my first flash!
Every thing worked fine.. but the touch screen is responding in a reversed manner!! Suppose i touch the left, its sensing the right, n so on!
I am going to give a try to the others too.. n specially that you are using now.. are the sensors working on it fine??
Click to expand...
Click to collapse
Well, that's the nice thing about flashing ROMs....if it doesn't work or you don't like it, you can always flash back to the original or another ROM.
The other ROMs on that site are better than the original ROM on the device and really help make the device usable. Good Luck!!
sorry forgot to mention that the sensors and everything seem to be working fine. I'll try the other three ROM later this weekend and let you know (if I actually get a chance to do so), how they worked...or didn't work.
jfarhat said:
sorry forgot to mention that the sensors and everything seem to be working fine. I'll try the other three ROM later this weekend and let you know (if I actually get a chance to do so), how they worked...or didn't work.
Click to expand...
Click to collapse
Will look forward to ya reply.
I have ordered an A13 9" tablet from DX.com. If it is anything like the one I bought for my mother I guess it will be and will need a good custom rom... ?
horzz said:
thanks.. but i already flashed it!! Was too curious..my first flash!
Every thing worked fine.. but the touch screen is responding in a reversed manner!! Suppose i touch the left, its sensing the right, n so on!
I am going to give a try to the others too.. n specially that you are using now.. are the sensors working on it fine??
Click to expand...
Click to collapse
Hi,
do you still have the stock rom? I accidentally deleted mine and now stuck with the reversed rom. Please help me, I've looked everywhere and couldn't find a single compatible rom.
If you do have it, please upload to a filesharing and email the link to [email protected].
Many thanks in advance for the help
abdinegoro said:
Hi,
do you still have the stock rom? I accidentally deleted mine and now stuck with the reversed rom. Please help me, I've looked everywhere and couldn't find a single compatible rom.
If you do have it, please upload to a filesharing and email the link to [email protected].
Many thanks in advance for the help
Click to expand...
Click to collapse
I don't still have the stock ROM but I found one on the thread link given above, that is much better and everything is working great on the device. I would suggest that you try one on this thread (if you have not already - it sounds like you may have already done so). That would be the only advise I can give you.
You could also try contacting the OP of that thread, he seems very well informed on ROM modifications, etc...but he also seems to be very busy with other projects and my not be able to give you much help...either way, it can't hurt to ask... Good Luck!
I would be glad to send you any of the ROMs that I have, but I do not believe they are the original ROM.
jfarhat said:
sorry forgot to mention that the sensors and everything seem to be working fine. I'll try the other three ROM later this weekend and let you know (if I actually get a chance to do so), how they worked...or didn't work.
Click to expand...
Click to collapse
please give the link for the working rom i need badly to flash my A13-MID tab
thanks
free007 said:
please give the link for the working rom i need badly to flash my A13-MID tab
thanks
Click to expand...
Click to collapse
If you have a dropbox or some other service, just share a folder with me (send me a messsage for my e-mail address) and I will place the ROMs that I have in that dropbox folder for you. Or you can just go through the link provided in one of the first few posts in this thread and then search that site.
http://www.androidtablets.net/forum...eneric-7-a13-android-4-0-4-hyper-edition.html
hey
is dere any one who coulls help me out
i m ussing worldtech pad888 a13 mid basedbtab tablet could some one help ..me to backup the stock rom ....
and provide me an update to costom rom ..
Sent from my A13-MID using xda app-developers app
a13 q88 mcbub mcpad yeahpad clone goodix touch
finally found a working rom (that isn't off center and has touch support), on the 26th try!
i purchased a mcpad f1 from mcbub.com early november 2012. i believe it has a goodix touch controller but i haven't done an lsmod so i'm not 100% sure. thank you for helping me out, jfarhat! here's my contribution to the internets. (aka more false leads! lol)
index.maixin-china.com/download/software/MaPan_MX713_Firmware_HG20121028.rar
chicoricochico said:
finally found a working rom (that isn't off center and has touch support), on the 26th try!
i purchased a mcpad f1 from mcbub.com early november 2012. i believe it has a goodix touch controller but i haven't done an lsmod so i'm not 100% sure. thank you for helping me out, jfarhat! here's my contribution to the internets. (aka more false leads! lol)
index.maixin-china.com/download/software/MaPan_MX713_Firmware_HG20121028.rar
Click to expand...
Click to collapse
That is great to see you got it working!
? Can the a13 be flashed to run windows 8 ?
Hi xda I just wunted to no if I could install window 8 not the phone or tablet rom but the 34 bit I no the q88 has anuff space for the os if anyone could help I will test on my q88 a13 boxchip nicknamed crybaby lol
Need Help!
jfarhat said:
Yeah, I tried it and it did not work. The ROM does not support the touch screen on the device. But in the thread, I found a lot of people that had this same problem. So, you will find there links to five other ROM that may work for you. I tried two of them and one of them the touch screen was slightly response, on my second ROM I got fully touch screen functionality. It seems to work well and better than the original ROM on the tablet. No forced close etc.... I have not tried the other ROMs yet, I might in the next few weeks.
the ROM that worked for me was the eliveupdate one. I have not yet tried the Teclast_p76TI-r1-3_4.03_GAPPS_r2 nor Teclast_p76TI-r4_4.03_GAPPS_r2. Also I have not yet tried the Tragidy-A13-Hyper-Jelly-404C-Mali.
I forget the name of the file that did not work but it started out with something like "soni----------". I already delete that file from my computer.
it is worth changing the ROM, the original ROM sucks big time and constantly would have errors, now the device is usable. While it is a low end device with low end specs.....it is a great device for my son (6 yrs old) and now it is fully functional without any errors popping up.
good luck!
Click to expand...
Click to collapse
I have a AnnPad A13-MID and I already flashed the rom but had no luck. It is now in a different language and the touch screen is all messed up. I also did not backup the original stock rom and didn't know how to. Can you please send me a link to the rom you used or if you know of any that will work with my specific model I have. Any help from you or anyone who knows about doing this stuff would be greatly appreciated! Thank you for your help!
So the first person who makes completely working miui or cm10.1 or both will get 100-150 dollars
Sent from my Samsung Galaxy SIV using xda app-developers app
gogozx said:
So the first person who makes completely working miui or cm10.1 or both will get 100-150 dollars
Sent from my Samsung Galaxy SIV using xda app-developers app
Click to expand...
Click to collapse
does this offer still stand?
If so, I will give it a go.
OpenMinded said:
does this offer still stand?
If so, I will give it a go.
Click to expand...
Click to collapse
Yes, it still stands, but i found out that CM10.1 is currently impossible to make, so you can try with MIUI V5.
gogozx said:
Yes, it still stands, but i found out that CM10.1 is currently impossible to make, so you can try with MIUI V5.
Click to expand...
Click to collapse
so how did you make the nexus rom for it?
The issue is that I do not own the phone, but I am looking at porting CM to MTK6589.
MIUI porting is a bit different, it would not involve kernel compiling per se I believe (CM either, but I would like to).
To give it a go, I would need info from here:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
So your ROM version, partition info etc.
When I manage to port to a device I own, I can give it a go.
OpenMinded said:
so how did you make the nexus rom for it?
The issue is that I do not own the phone, but I am looking at porting CM to MTK6589.
MIUI porting is a bit different, it would not involve kernel compiling per se I believe (CM either, but I would like to).
To give it a go, I would need info from here:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
So your ROM version, partition info etc.
When I manage to port to a device I own, I can give it a go.
Click to expand...
Click to collapse
It's not really Nexus ROM, it's just stock ROM modified to look like stock Android.
I have Android 4.2.1
I will PM you the partition info.
gogozx said:
It's not really Nexus ROM, it's just stock ROM modified to look like stock Android.
I have Android 4.2.1
I will PM you the partition info.
Click to expand...
Click to collapse
Just started with practicing on my Nexus 7 . I ordered the same model as well, N9389.
I also have a N9599, let's see how far I get .
OpenMinded said:
Just started with practicing on my Nexus 7 . I ordered the same model as well, N9389.
I also have a N9599, let's see how far I get .
Click to expand...
Click to collapse
Wow, it seems that you have alot of money to order it just because you want to develop ROM for that phone.
Good luck man, if you need any help message me
gogozx said:
Wow, it seems that you have alot of money to order it just because you want to develop ROM for that phone.
Good luck man, if you need any help message me
Click to expand...
Click to collapse
Well, not really, but I like to spend money on those things.
When the ROM works I'll sell it .
Well dump info and the stuff on the CM porting page is still usefull.
cheers
OpenMinded said:
Well, not really, but I like to spend money on those things.
When the ROM works I'll sell it .
Well dump info and the stuff on the CM porting page is still usefull.
cheers
Click to expand...
Click to collapse
I will be testing those ROMs that you make for N9389, is it OK?
gogozx said:
I will be testing those ROMs that you make for N9389, is it OK?
Click to expand...
Click to collapse
If I manage to make something working, sure !
OpenMinded said:
If I manage to make something working, sure !
Click to expand...
Click to collapse
i compiled my first recovery based on cm 10.1 for Thl W8.
I have no easy way to push the image to the phone to test.
If it works, I can start to create a recovery for this phone based on sources.
I would need that info I requested.
Are you able to post the build.prop file and the partition dump?
Look at the page with instructions I posted earlier.
Meantime I look for an easy way to flash that recovery, somehow sp flashtool does not read the scatter file created by mtkdroidtools .
cheers
managed to flash it, but it does not work , just a black screen .
Harder than it looks.
Can't promise anything, but I'll post if I get further.
Compiling on an old C2D now, so it takes time .
OpenMinded said:
managed to flash it, but it does not work , just a black screen .
Harder than it looks.
Can't promise anything, but I'll post if I get further.
Compiling on an old C2D now, so it takes time .
Click to expand...
Click to collapse
Even if you failed, thank you for trying and i hope you will make it
gogozx said:
Even if you failed, thank you for trying and i hope you will make it
Click to expand...
Click to collapse
you are welcome .
I do still need the information I mentioned once I get it working.
Especially the partition info is important.
You may always hit the thanks button when you are happy .
I am currently working on CWM 6 to get working.
I'll post when I have progress (or when I quit ).
You can always give it a go yourself:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
cheers!
OpenMinded said:
If I manage to make something working, sure !
Click to expand...
Click to collapse
So, like I requested before, please :
- post your build.prop file
- post identification stuff of the device, like screen resolution, memory and recovery.fstab (or the recovery image)
- in general take a look at the link I posted before and read it, so you know what info is needed :
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
The reason I ask is because there are at leat 2 different versions, 1 had 960x480 screen and 1/4gb ram/rom, the other 1280x720 and 2/8.
They obviously at least have different partitions and displays and perhaps even other different hardware.
You can also post a full working ROM on dropbox or something.
thanks
P.S. for the needed tools, see here:
http://forum.xda-developers.com/showpost.php?p=44096751&postcount=371
This is a CWM 6.0.3.3 which works on my device.
Use SP Flash Tools 3.13 something to flash.
My scatter file is attached, please compare it with yours.
Needless to say perhaps, but still: this is on your own risk.
You may damage your device if you do not know what you are doing.
Bricking it is not my fault!
So think before you act.
If you try: please give feedback if it works.
If does it is the same device: N9389 5.3", 960x480 (qHD) , 1 gb ram, 4 gb rom.
Device identifier: v89_gq2002s
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P2, 2013/03/26 12:42
cheers!
OpenMinded said:
This is a CWM 6.0.3.3 which works on my device.
Use SP Flash Tools 3.13 something to flash.
My scatter file is attached, please compare it with yours.
Needless to say perhaps, but still: this is on your own risk.
You may damage your device if you do not know what you are doing.
Bricking it is not my fault!
So think before you act.
If you try: please give feedback if it works.
If does it is the same device: N9389 5.3", 960x480 (qHD) , 1 gb ram, 4 gb rom.
Device identifier: v89_gq2002s
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P2, 2013/03/26 12:42
cheers!
Click to expand...
Click to collapse
OK, thank you man but i already have CWM :/
Anyways yes that is my phone
And here is the stock ROM
http://www.needrom.com/mobile/star-n9389/
gogozx said:
OK, thank you man but i already have CWM :/
Anyways yes that is my phone
And here is the stock ROM
http://www.needrom.com/mobile/star-n9389/
Click to expand...
Click to collapse
You have CWM 6 already? If you are sure, I will continue.
OpenMinded said:
You have CWM 6 already? If you are sure, I will continue.
Click to expand...
Click to collapse
I'm sure You have no idea how happy i am now, you honestly make me happy because you try so hard for person that you don't even know DD
gogozx said:
I'm sure You have no idea how happy i am now, you honestly make me happy because you try so hard for person that you don't even know DD
Click to expand...
Click to collapse
Hi,
Well I am partly motivated by your offer, but I enjoy Android and Linux hacking.
Let's hope those attempts will lead to something.
How about LewaOS? There are good porting guides for that.
I will try to look for MIUI or CM in the weekend.
Initial CM would miss dual sim support.
Maybe MIUI is easier, because some work has been done.
Well, I'll see.
Don't overestimate the complexity, if you have CM 6 and made it yourself, porting a rom is doable I suppose ?
cheers
hi im looking to make a cm rom for my rooted e5533 phone,problem is i know nothing about programming if annyoune could help me its appriciated
I tried that too m8 ended up screwing boot, damaging Mother board. Luckily service changed Mother board for free. I am not gona try making roms again. We need developers Like @bigrammy
Svenieboy100 said:
hi im looking to make a cm rom for my rooted e5533 phone,problem is i know nothing about programming if annyoune could help me its appriciated
Click to expand...
Click to collapse
gsser said:
I tried that too m8 ended up screwing boot, damaging Mother board. Luckily service changed Mother board for free. I am not gona try making roms again. We need developers Like @bigrammy
Click to expand...
Click to collapse
Sony are normally well supported when it comes to mods and roms etc but I must say I am very surprised by the lack of dev's for these phone's
ROM porting is not really my speciality but I am working on a project that hopefully will make the process a lot lot easier. :fingers-crossed:
I will require a lot more time on my part but I will be using the Xperia C4 as my test device now that I have it back from being on loan to a friend. :good:
As I said before I doubt any port will be anywhere near as good as the stock rom is so do not expect too much. :laugh:
Please dont ask for dates or when as I have no idea but please remember this is just a hobby of mine and I do have a family & day job that take up most of time.
How you rooted it? I want to root my e5533..
Svenieboy100 said:
hi how you rooted
You e5533? I cant find nothing.....
Click to expand...
Click to collapse
Vote for a stock/near stock android Nougat update for the Axon 7 over at Z-Community! It needs at least 100 votes for ZTE's R&D to consider it. As of this post there are already a little more than half of the 100 needed. This is what we have been waiting for so don't pass up on this opportunity! Make your voices heard!
Edit: 500 votes needed now! We can do this!
Link: https://community.zteusa.com/polls/1481
Edit: 60 votes!
Edit: 70 votes!
Edit: 80 votes! So close!!!!
Edit: 90 votes! Holy s**t!!!
Edit: 100 votes! Holy s**t we actually did it!
Edit: 200 votes!
Edit: 300 votes!
I don't believe zte anymore. They said that we would share unbrick tool 2 3 weeks ago, where is it?
WesTD said:
I don't believe zte anymore. They said that we would share unbrick tool 2 3 weeks ago, where is it?
Click to expand...
Click to collapse
They never said anything about an unbrick tool. They said they would release the stock image, which they did.
Here is the announcement: https://community.zteusa.com/message/65579
To download go here: https://www.zteusa.com/axon-7 then go down to Support<Software Updates< and download the zip
bkores said:
They never said anything about an unbrick tool. They said they would release the stock image, which they did.
Here is the announcement: https://community.zteusa.com/message/65579
To download go here: https://www.zteusa.com/axon-7 then go down to Support<Software Updates< and download the zip
Click to expand...
Click to collapse
They said we won't let be brick. This was means of their photo. You can check again here. https://community.zteusa.com/community/blogging/blog/2016/10/20/coming-soon-to-a-device-near-you And they shared just stock Rom which could install stock recovery. So how can I recover from brick if I can't reboot on stock recovery?
It is old version of stock Rom and you can't upload Rom. Is it a joke?
WesTD said:
They said we won't let be brick. This was means of their photo. You can check again here. https://community.zteusa.com/community/blogging/blog/2016/10/20/coming-soon-to-a-device-near-you And they shared just stock Rom which could install stock recovery. So how can I recover from brick if I can't reboot on stock recovery?
It is old version of stock Rom and you can't upload Rom. Is it a joke?
Click to expand...
Click to collapse
still better than nothing. 99% of the time you'll be able to boot into recovery, stock or TWRP. And you can also flash it in TWRP if you remove the getprop and assertprop lines in the updater-script. If you ever hard brick your phone and can't boot into recovery, just use tenfar's tool.
Voted! Let us know if anything actually happens with this!
chris23445 said:
Voted! Let us know if anything actually happens with this!
Click to expand...
Click to collapse
100 votes!!!
bkores said:
100 votes!!!
Click to expand...
Click to collapse
Been raise to 500 votes LoL,
bkores said:
still better than nothing. And stop complaining because 99% of the time you'll be able to boot into recovery, stock or TWRP. And you can also flash it in TWRP if you remove the getprop and assertprop lines in the updater-script. If you ever hard brick your phone and can't boot into recovery, just use tenfar's tool.
Click to expand...
Click to collapse
Problem is not that given stock rom. the problem is they didn't do that what they promised. And I'm not happy with that. Don't be fan boy.
I'm waiting something about software from DrakenFX and Unjustified Dev. I believe that they will make this phone better.
Whatever. this is not topic. I'll vote.
Edit: i've checked polls option. Do want to choose "Cleaner user interface and skin"? If it is yes please tell us that you were joking. There is one option to choose which "Greater dev support for custom ROMs". If there are too many roms all other options will be already.
WesTD said:
Problem is not that given stock rom. the problem is they didn't do that what they promised. And I'm not happy with that. Don't be fan boy.
I'm waiting something about software from DrakenFX and Unjustified Dev. I believe that they will make this phone better.
Whatever. this is not topic. I'll vote.
Edit: i've checked polls option. Do want to choose "Cleaner user interface and skin"? If it is yes please tell us that you were joking. There is one option to choose which "Greater dev support for custom ROMs". If there are too many roms all other options will be already.
Click to expand...
Click to collapse
Listen buddy I did not create this poll. In case you can't read, the poll was made by an official ZTE mod and all i asked of you to do was vote so that they would be able to pitch it to R&D so we would have the possibility of getting near stock android for nougat. I have no idea what you mean when you ask if I was joking. Joking about what? I didn't ask you to "choose" the cleaner ui option, just to vote. I also didn't ask you to come here and start whining. Quit barking at me or I will ask for this thread to be locked.
Have a good day
P.S. I didn't mean to sound so harsh I just have a very short temper for these kind of things lol
Time to update the OP with "200 votes [email protected][email protected]#[email protected]#@#[email protected]#"?
Gryphticon said:
Time to update the OP with "200 votes [email protected][email protected]#[email protected]#@#[email protected]#"?
Click to expand...
Click to collapse
Good idea
DrakenFX said:
Been raise to 500 votes LoL,
Click to expand...
Click to collapse
Thanks updating the OP to reflect the change
bkores said:
Thanks updating the OP to reflect the change
Click to expand...
Click to collapse
Well for me most important is to have good custom ROM support... Then we're free to develop whatever we want: from AOSP till MIUI, the whole free world of custom dev... Then wouldn't need to care about stock anymore!
But hey, let's vote for whatever we see and take the 500 votes limit
About stock roms: I bought a lower spec Zte phone (Blade V770) earlier this year that has pure stock Android and is flawless. It runs stock Marshmallow, has Dolby audio and also amazing battery life. It was a 200 euros phone so there shouldn't be any problems for them to give us stock Android.
Sent from my ZTE A2017G using Tapatalk
And we made it to homepage http://www.xda-developers.com/zte-invites-user-opinions-on-why-they-use-stock-android/
nupi said:
And we made it to homepage http://www.xda-developers.com/zte-invites-user-opinions-on-why-they-use-stock-android/
Click to expand...
Click to collapse
Awesome someone on the community just told me. Hopefully this gets as a lot more votes. As of now we still need 200 more!
I hope the frontpage thingy works. We need to spread the word more. Get 500 votes together, I voted already.
Please spread the word.
Voted. Spread the news every one, saw this on Reddit already. Proud to see this device finally taking off, I couldn't pass up on it.
There is one simple solution for zte. axon 7 with stock Android on screen buttons better camera maybe few tweaks from them nothing major.
What things will I require? What know how? Is someone ready to help?
AEonAX said:
What things will I require? What know how? Is someone ready to help?
Click to expand...
Click to collapse
The fact you are asking this question signifies you have no idea about porting
Negi9 said:
The fact you are asking this question signifies you have no idea about porting
Click to expand...
Click to collapse
One can always learn. Right?
I am currently using Resurrection Remix. I have already taken a TWRP backup of original MIUI rom. what else will i require?
AEonAX said:
One can always learn. Right?
I am currently using Resurrection Remix. I have already taken a TWRP backup of original MIUI rom. what else will i require?
Click to expand...
Click to collapse
It's not that simple. You'll need to learn a lot about coding in order to be anywhere close to doing it. It's not copy pasting stuff here and there or installing from a backup.
Negi9 said:
It's not that simple. You'll need to learn a lot about coding in order to be anywhere close to doing it. It's not copy pasting stuff here and there or installing from a backup.
Click to expand...
Click to collapse
I think being a software engineer will help mostly :fingers-crossed:
Why would you wanna do that when we have Gcam
Slow motion video, portrait mode and other things. Some body please provide some guidance.
AEonAX said:
Slow motion video, portrait mode and other things. Some body please provide some guidance.
Click to expand...
Click to collapse
Ok, seeing that you are pretty serious about this, contact this guy as he has experience in porting Mi A2 stock camera to custom roms
I hear you !
AEonAX said:
What things will I require? What know how? Is someone ready to help?
Click to expand...
Click to collapse
Since you're a noob, I can't think of anything easier than this for you
Go through the ports which are already available (like Mi A2) (must be xiaomi)
See what files the dev used to get the camera working on non-miui roms
To give you rough idea there will be xiaomi framework , some xmls, libs etc.
Try replicating those exact files from your stock firmware and create a flashable zip or directly paste em into root
Also try contacting the dev of that camera and see if he agrees to help you out !
Ask him if you face any trouble throughout.
Ignore people who are discouraging,
Today a noob, tomorrow a pro
Thanks a lot. I trialed and error-ed and came to same method you mentioned below.
blacklisted.rock said:
Since you're a noob, I can't think of anything easier than this for you
Go through the ports which are already available (like Mi A2) (must be xiaomi)
See what files the dev used to get the camera working on non-miui roms
To give you rough idea there will be xiaomi framework , some xmls, libs etc.
Try replicating those exact files from your stock firmware and create a flashable zip or directly paste em into root
Also try contacting the dev of that camera and see if he agrees to help you out !
Ask him if you face any trouble throughout.
Ignore people who are discouraging,
Today a noob, tomorrow a pro
Click to expand...
Click to collapse
I learnt a lot, Got a little bit working port by myself. I will create a new thread with further details
AEonAX said:
Thanks a lot. I trialed and error-ed and came to same method you mentioned below.
I learnt a lot, Got a little bit working port by myself. I will create a new thread with further details
Click to expand...
Click to collapse
Bro can you give the link of the apk and instructions to install it.
SamyakJ said:
Bro can you give the link of the apk and instructions to install it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/poco-f1/themes/port-t3879357
AEonAX said:
https://forum.xda-developers.com/poco-f1/themes/port-t3879357
Click to expand...
Click to collapse
Thanx bro
I'm glad I helped
AEonAX said:
Thanks a lot. I trialed and error-ed and came to same method you mentioned below.
I learnt a lot, Got a little bit working port by myself. I will create a new thread with further details
Click to expand...
Click to collapse
My Poco is arriving in 3 days, I might just test your port and solve a few problems after I unlock my bootloader.