Hi guys. I cant get any help on how to backup my Alcatel pop C1. Currently using 4.2.2. Ive made a backup on flashify but i can never boot up into a third party recovery. Only stock Recovery. Im scared of messing up and getting stuck at boot logo. Any help? Thanks
4015?
there are 6 versions of this phone
and the latest one 4015x has a different set of partitions
use the diskinfo app from play store
if your DATA partition is "mmcblk0p8 and your system is "mmcblk0p8" then the recoverys and roms that are up at the mo wont work
will probb softbrick your phone
i have modded some recoverys (stock and CWM) and a rom so they work with the diff table
i will be posting them under5 a new post "4015x"
but i would also use the "mobile upgrade" program from alcatel as this can flash the stock rom and get you out of softbrick
this also has a duff recovery with the wrong partition table though
hope this is helpful
Related
My son, in all his wisdom didnt see a need for the custom recovery or nandroid. Except now his phone wont boot so I am unable to get an adb shell. It is stuck at lg boot screen. I can get to the stock recovery which is s-on apparently. I do have backups of the stock img files. system, boot, recovery, etc. He said he was trying to add a custom kernel to the boot img via adb when he encountered the problem. Is it possible currently to flash a new kernel and or rom via the stock recovery? I cant seem to get past the verification. Any help is greatly appreciated.....
Go to stickies on forum and you will see what you have to do.. you need KDZ updater and the stock image.. that's what worked for me..
Sent from my LS670 using XDA App
Hi again everyone, Ive managed to brick my optimus s. It wont boot, charge, flash buttons or connect to pc. Is there any hope for my phone? If so, please share. Thanks
I have a Karbonn Titanium S2....Already Rooted it. But didnt install CWM. Installed Pimp My ROM........Changed few settings.....when i rebooted the device, it is stuck in Karbonn Logo. I entered recovery mode (Andriod Recovery <3e>) and Wiped all user data and cache. But still the phone doesnt go beyond the operator logo. Phone is just one month old................. Pls help me guys!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:crying:
Help
karthiknanthaa said:
I have a Karbonn Titanium S2....Already Rooted it. But didnt install CWM. Installed Pimp My ROM........Changed few settings.....when i rebooted the device, it is stuck in Karbonn Logo. I entered recovery mode (Andriod Recovery <3e>) and Wiped all user data and cache. But still the phone doesnt go beyond the operator logo. Phone is just one month old................. Pls help me guys!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:crying:
Click to expand...
Click to collapse
If you can access your recovery and/or sd card through mounting. Your device isn't bricked. I would suggest you double check everything you downloaded and make sure it's all compatible with your device. If one simple .zip doesn't match your device you can get a bootloop or soft brick (non-fatal) which is what you seem to be experiencing. Let me know if you have any questions and thanks for sharing!
Still facing issues..........
Heavywater88 said:
If you can access your recovery and/or sd card through mounting. Your device isn't bricked. I would suggest you double check everything you downloaded and make sure it's all compatible with your device. If one simple .zip doesn't match your device you can get a bootloop or soft brick (non-fatal) which is what you seem to be experiencing. Let me know if you have any questions and thanks for sharing!
Click to expand...
Click to collapse
Not getting the exact stock rom for this model anywhere. when i tried to install other custom roms........installation gets aborted.
Search in moulnisky.com there you may find your stock rom with flash tool
Sent from my A15 using XDA Premium 4 mobile app
Hi All, I rooted my Verizon GS4 with this method "[GUIDE] Root for Verizon Galaxy S4 ***VRUAMDK Build Only!***" back before the first update so I have Root with Baseband I545VRUAMDK, Build JDQ39.I545VRUAMDKand Kernal 3.4.0-562219. I haven't tried to install any ROMs since then but started to get the itch so I started refreshing myself on the process and found that when I try to reboot into CWM Recovery it boots to Android System Recovery 3e. I'm looking for guidance on how to get CWM working properly. ROM Manager says I am using CWM 6.0.4.7. Any help will be appreciated.
Thanks
jpp2109 said:
Hi All, I rooted my Verizon GS4 with this method "[GUIDE] Root for Verizon Galaxy S4 ***VRUAMDK Build Only!***" back before the first update so I have Root with Baseband I545VRUAMDK, Build JDQ39.I545VRUAMDKand Kernal 3.4.0-562219. I haven't tried to install any ROMs since then but started to get the itch so I started refreshing myself on the process and found that when I try to reboot into CWM Recovery it boots to Android System Recovery 3e. I'm looking for guidance on how to get CWM working properly. ROM Manager says I am using CWM 6.0.4.7. Any help will be appreciated.
Thanks
Click to expand...
Click to collapse
From what I've read about that issue is people have had to Odin back to stock then start over. Now maybe you could try installing another recovery like Philz maybe using Odin or try Goo for TWRP before you Odin back to mdk and go through all that.
Sent from my SCH-I545 using Tapatalk
I had a similar thing a few years ago, with what I know now I think the recovery is temporarily flashed with CWM to gain root and stock recovery is replaced after, I'd look for an actual CWM recovery to flash in.
Same applied to me using a ROM Manager, said it was v.xxx made a backup, flashed a ROM, turns out was left without a backup..... noob-old days
Bashing away at my HTC Desire C
Thank you for the solid replies, I'm interested in getting experience with the other recovery methods anyway so I'll try those and worse case I start from scratch.
I have pretty much this same issue. I was happily running 6.0.44 CWM, installed via CWM.
Then I happened to check and see there's an update to 6.0.47. I installed via ROM manager which reported success. Except that it isnt. I basically have 2 recoveries as far as ROM manager is concerned. It thinks I'm on 6.0.47, but 6.0.44 is what boots. I'm betting it's the same issue you have.
I re-flashed Twrp trying to fix it. Now twrp is what recovery always boots; but Rom manager still thinks 6.0.47 is installed. Rom manager shows BOTH recoveries in the "Recovery already installed" menu.
Seems the issue here is the 6.0.47 when flashed via Rom manager. It bugs the crap out of me that it seems like I have 2 recoveries installed somehow. Not sure how that's possible, but everything seems like it's functioning for me.
Compare the sizes of the recoveries, one thing I've come across is when you flash a new .img in because of the NAND chip process for writing/erasing I have had 'remnants' from previous files.
In one respect it is unlikely but I wouldn't rule it out until you check yourself. It could just be left on the list as a marker that it has previously been installed.
Personally I don't use ROM Managers now, it's into TWRP Recovery and backup from there
Bashing away at my HTC Desire C
Look Like I'll Have to Start From Scratch
I'm just getting back to this because work was crazy. No Matter what recovery I try always comes up with Android System Recovery 3e. Stock MDK and re-root it is.
Maybe try using GooManager to install TWRP after you've gone back to stock.
Hi..
I have a really bad problem on my clone of Samsung Galaxy S5 (Mediatek Device)
I found a nice custome rom for my phone and done the instructions to backup my Current rom and Current Recovery
I used Flashify and it looked as a nice app for flashing the recovery image and the rate on google play store have been exellent
Downloaded the app and backuped my recovery image and flashed the phone.
Rebooted the phone and it doesnt want to get inside Recovery mod
Just reboots the device again and I knew I got Soft-Brick and now I cant find the backup recovery. Not on my SD Card not in the Internal storage Nowhere..The app deleted it :crying:
Now what I can do with that....
PlzzGuys Help me This is my first time that I doing this and I really Need Help About this
Found the recovery image for my device on Internet downloaded itand dont know how to install it
If it is there a program that I can fix this please send me here the Link that i can fix it and if its not hard to explain me how to do it i would really be thankful..
Tryed with Fastboot mod and with ADB but nothing
:crying::crying::crying::crying:
Hello everybody! i hope everyone is good
the other day i decided to try to install CWM so i could install Xposed Firmware on a phone that wasnt on the list i have an MLS IQTalk Flame 4G iQ1502A that runs Andorid 5.1 Lollipop and its rooted via King Root so after installing Clockwork recovery i realized the sickening mess of my ways...now i have NO recovery whatsoever stock is gone and CWM aint even there,the phone boots normally and i can use it but i cant boot into the recovery mode,im scared stupid right now and dont have any money for a new phone can somebody here please help me ?
You can flash stock recovery with flashify
DeadSquirrel01 said:
You can flash stock recovery with flashify
Click to expand...
Click to collapse
i tried using flashify but its like my stock recovery has got corrupted or something,i really messed up...which is weird for me since i have been installing ROMs and everything on multiple phones over the years...but still thank you
Maybe you corrupted recovery partition, to solve this you can flash any working recovery