[TUTORIAL] How to enable TBD (True Dual Boot) in MI3 - Mi 3 General

Hello guys!
After many requests on how to enable TBD (True Dual Boot) in MI3 i have finally created this thread :victory: (and made a sacrifice, see tragedy for info)
#Notice:-
This is a guide only for the cwm 6.0.4.8 by funriel and donbot
This is a pictorial guide and select what is highlighted (either by recovery selection or green box)
#Note:- the images have been degraded to 540x960 for smaller upload (xda restriction) and were edited by paint (gimp is crashing)
For now please see the attachments! (L-R=1-6)
Tragedy
I lost both my os and data while disabling TDB so atleast what you can do is to press the thanks button

and how do we reboot to system 2 from CWM ?

arnabbiswasalsodeep said:
Hello guys!
After many requests on how to enable TBD (True Dual Boot) in MI3 i have finally created this thread :victoryand made a sacrifice, see tragedy for info)
This is a pictorial guide and select what is highlighted (either by recovery selection or green box)
#Note:- the images have been degraded to 540x960 for smaller upload (xda restriction) and were edited by paint (gimp is crashing)
For now please see the attachments! (L-R=1-6)
Tragedy
I lost both my os and data while disabling TDB so atleast what you can do is to press the thanks button
Click to expand...
Click to collapse
If I understand correctly, the difference between True Dual Boot and the normal Dual Boot that comes stock is that stock allows only the same firmware to be installed in both partitions, while TDB lets you have, say, MIUI in System1 and AOSP-based ROM in System2.
Is that correct?

The Dork Knight Rises said:
If I understand correctly, the difference between True Dual Boot and the normal Dual Boot that comes stock is that stock allows only the same firmware to be installed in both partitions, while TDB lets you have, say, MIUI in System1 and AOSP-based ROM in System2.
Is that correct?
Click to expand...
Click to collapse
Yup.

The other difference is that both the systems have a common data partition before the tdb

@arnabbiswasalsodeep
Does enabling this features wipes data??

That depends
If you choose to wipe data then it will wipe it
I moved my data
But beware! Once enabled then disabling it might cause some problems (you should have the same os installed on both systems)

arnabbiswasalsodeep said:
That depends
If you choose to wipe data then it will wipe it
I moved my data
But beware! Once enabled then disabling it might cause some problems (you should have the same os installed on both systems)
Click to expand...
Click to collapse
What problems???

Bootloop
Or data wipe
Quote me so I can reply
Sent from my MI3

arnabbiswasalsodeep said:
Bootloop
Or data wipe
Quote me so I can reply
Sent from my MI3
Click to expand...
Click to collapse
I jst wanna ask something...
Suppose I enabled tdb then will I able to install AOSP on one and MIUi on other???

Yes
I have cm in system 1 and miui in system 2
Quote me so I can reply
Sent from my MI3

arnabbiswasalsodeep said:
Yes
I have cwm in system 1 and miui in system 2
Quote me so I can reply
Sent from my MI3
Click to expand...
Click to collapse
And I wanna remove Cm11 then????

Go to data and mounts
Selected wipe system 1 (your preference)
By default when you will enable tdb, I'll suggest you to move data to data 1 and install any other rom in system 2
Quote me so I can reply
Sent from my MI3

arnabbiswasalsodeep said:
Go to data and mounts
Selected wipe system 1 (your preference)
By default when you will enable tdb, I'll suggest you to move data to data 1 and install any other rom in system 2
Quote me so I can reply
Sent from my MI3
Click to expand...
Click to collapse
Kkkzz thanks for the info
---------- Post added at 03:15 PM ---------- Previous post was at 03:15 PM ----------
thejoker said:
Kkkzz thanks for the info
Click to expand...
Click to collapse
So have you faced problems after enabling tdb.....???

thejoker said:
Kkkzz thanks for the info
---------- Post added at 03:15 PM ---------- Previous post was at 03:15 PM ----------
So have you faced problems after enabling tdb.....???
Click to expand...
Click to collapse
Press the thanks button if you want to thank (if you can then do it on each and every reply [emoji16] )
Quote me so I can reply
Sent from my MI3

I am on miui v6 beta on sys1 and want to have cm11 on sys2 with tdb, pls guide!!
I am on miui v6 beta on sys1 and want to have cm11 on sys2 with tdb, pls guide
PS I have not rooted mi3 (dont know if v6 beta has come with root though)
arnabbiswasalsodeep said:
Yes
I have cm in system 1 and miui in system 2
Quote me so I can reply
Sent from my MI3
Click to expand...
Click to collapse

Thanks for the neat tut bro really helpful

Prerooted MIUI6 Beta
sanjaxz said:
I am on miui v6 beta on sys1 and want to have cm11 on sys2 with tdb, pls guide
PS I have not rooted mi3 (dont know if v6 beta has come with root though)
Click to expand...
Click to collapse
v6 BETA is a dev rom so its pre rooted.
Just install super su from playstore and then go to security>permissions>root permissions
give permission for root to super su and then enjoy the root.

pranii23 said:
v6 BETA is a dev rom so its pre rooted.
Just install super su from playstore and then go to security>permissions>root permissions
give permission for root to super su and then enjoy the root.
Click to expand...
Click to collapse
I think you forgot to tell him that it's not possible to have Miui on system1 and CM on system2. All AOSP roms should be installed on system1. Keep Miui on system2.

Any Solution Pls!!
sanjaxz said:
I am on miui v6 beta on sys1 and want to have cm11 on sys2 with tdb, pls guide
PS I have not rooted mi3 (dont know if v6 beta has come with root though)
Click to expand...
Click to collapse
PS I read that TDB is still half baked and causing issues, shall I go ahead?? Also will someone throw light on how do you keep switching OS's after enabling tdb and is there any boot menu??

Related

[ROM][JB][2012-08-30] AOKP-JB-N1-v3.1

IF YOU HAVE ANY QUESTIONS WITH THIS ROM, YOU SHOULD GO HERE​.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
warning:you have to re-partiton to new hboot
can be installed to partition that has 160mb+ system and 8mb+ cache(it uses about 152mb with gapps included)
Click to expand...
Click to collapse
md5:b221b65e8e818d35d7296a2c135d84a1
If your phone bricks or you cannot flash it because of errors, you should check md5 before post questions here
Click to expand...
Click to collapse
featured:
Gapps included
Multi-language support
My SD Card write speed in this ROM(10 class):14.0MB/s
in recovery:9.82MB/s
Click to expand...
Click to collapse
Working:
Data
Wifi(Tether seems not working)
Bluetooth
Rotation
Mic
Sound
Usb Mass storage
Gps
Scripts(like app2sd)
Trackball wake
Volume button wake
HWA
Camera
Click to expand...
Click to collapse
I need feedbacks....
I ported AOKP using Evervolv 3.0.0.(thanks to Evervolv team)
DOWNLOAD
changelog:
v3.1:fixed superuser issue
v3.0:updated OTAupdater
included S2E
updated to latest
v2.3:fixed OTA issues
v2.2:may fixed ota issues(try when next build is out)
v2.1:fixed Phone.apk issue
fixed Superuser.apk permission issue
updated OTAUpdater
v2.0:Almost everything
v1.5:updated to latest Evervolv
v1.4:updated to latest Evervolv
fixed superuser
v1.3:changed camera.apk
v1.2:changed superuser -> supersu
removed filemanager(has explorer)
graphic driver update
version 2.0 has so many errors so I will upload v1.2 first.(v2.0 cannot mount usb-storage. when try, settings stop.)
v1.1:Changed AOKP-specific
v1:initial release
Click to expand...
Click to collapse
I removed [alpha] and [dev] but It's still preview version(because, Evervolv JB AND CM10/AOKP is preview version)
Click to expand...
Click to collapse
Screenshots are attached.
This port is from hd2 forum, so all credits should go to evervolv&hd2 devs
As always, this is alpha version so you should not expect too much
do it at your own risk
reider123 said:
As always, this is alpha version so you should not expect too much
do it at your own risk
Click to expand...
Click to collapse
Which AOKP build number did you use for porting?
taodan said:
Which AOKP build number did you use for porting?
Click to expand...
Click to collapse
Edit:it says preview 5 version
Sent from my Nexus One using xda premium
Do you think runs smoother AOKP or CM10 ? there is a difference of about 40 mb as I see between the 2 version or am I wrong?
fegato said:
Do you think runs smoother AOKP or CM10 ? there is a difference of about 40 mb as I see between the 2 version or am I wrong?
Click to expand...
Click to collapse
you're right
seems AOKP is much faster than cm10
beside, can you test it? I AM using it, but mant people have their own phone-using-habits
reider123 said:
you're right
seems AOKP is much faster than cm10
beside, can you test it? I AM using it, but mant people have their own phone-using-habits
Click to expand...
Click to collapse
Yes I said that because I'am testing now and seems a bit faster to me too also in booting and Include NovaLauncher also. Nice surprise.
Oh and to get rid of the NavBar I set its height to 0, It's right? maybe it's intresting for someone else..
fegato said:
Yes I said that because I'am testing now and seems a bit faster to me too also in booting and Include NovaLauncher also. Nice surprise.
Oh and to get rid of the NavBar I set its height to 0, It's right? maybe it's intresting for someone else..
Click to expand...
Click to collapse
If you want to get rid of the Navigation bar, you must set its height AND height landscape
Is it possible to flash it with 4ext?
timmy93 said:
Is it possible to flash it with 4ext?
Click to expand...
Click to collapse
try it. but some recoveries cannot flash this ROM
timmy93 said:
Is it possible to flash it with 4ext?
Click to expand...
Click to collapse
worked for me without issues
Can I have one question
In the ics wifi not working for me
I must install wifix to male it on
So what about JB is it the same? ??
Because the wifi is not working for me
Sorry for my bad English
Sent from my Nexus One using xda premium
Do I have to use the partition you request to use or can I use texasics partition for ics
Sent from my Nexus One using xda app-developers app
adio201 said:
Do I have to use the partition you request to use or can I use texasics partition for ics
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
can be installed to partition that has 160mb+ system and 8mb+ cache(it uses about 152mb with gapps included)
---------- Post added at 04:57 PM ---------- Previous post was at 04:54 PM ----------
tariqso said:
Can I have one question
In the ics wifi not working for me
I must install wifix to male it on
So what about JB is it the same? ??
Because the wifi is not working for me
Sorry for my bad English
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
do you have the correct partition???do you do the correct wipe,can you say more information about your problem?
Trackball wake! w0w! Downloading now...
hi rayder123 good job man!:good:
---------- Post added at 05:00 PM ---------- Previous post was at 05:00 PM ----------
clustered said:
Trackball wake! w0w! Downloading now...
Click to expand...
Click to collapse
yeah!!!!it is amazing!
clustered said:
Trackball wake! w0w! Downloading now...
Click to expand...
Click to collapse
Sadly there's no option to disable trackball wake
I think most people don't want trackball wake as it's only for people having power button broken (wonder why there are som any nexus one with broken power button ?? mine is totally fine after 2 years of intense usage)...
in texas ice rom there's an option to desactivate it ... can it be added to AOKP (and CM10 along the way ... )
---------- Post added at 05:06 PM ---------- Previous post was at 05:04 PM ----------
reider123 said:
try it. but some recoveries cannot flash this ROM
Click to expand...
Click to collapse
I flashed with 4ext and everything went fine ...except that terminal emulator was crashing !
Could it be a flashing problem ? I'll try with 4ext again to confirm then with amon-ra (as you seem to recommand this recovery).
EDIT : even with Ra recovery terminal emulator is crashing ... anyone having the same problem ? or is it me ?
OK I install the from works faster and smoother then texasics jelly bean but I flash without the gapps and Google now fc when opening...anyone else had this problem
Sent from my Nexus One using xda app-developers app
I must say, this is a pretty impressive port. Is odd that Google Voice works on this and not Drew's as it is the same base. Any possibility of getting the stock keyboard back in there? I know you can download the one from the Play store, but its not as good and the included one is too cartoonish for my liking. Well done though!
reider123 said:
Edit:it says preview 5 version
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
Flashed the ROM. Kam-sa-ham-ni-da

[MOD][14JAN]MultiROM v19a for HTC One // Unofficial port // FIXED RECOVERY UI //

Introduction
First time,I want to say THANKS !!!! to @Tasssadar because he's the creator and he helped me a lot !!!MultiROM is one-of-a-kind multi-boot mod for HTC One (international). It can boot any Android ROM as well as other systems like Ubuntu Touch, once they are ported to that device. Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.
Features:
* Multiboot any number of Android ROMs
* Restore nandroid backup as secondary ROM
* Boot from USB drive attached via OTG cable
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=SCYh14Zwl3s You can also watch a video which shows it in action.​
Warning!
It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash factory images again. Make backups. Always.​
Click to expand...
Click to collapse
Installation
Note 1: Your device must not be encrypted (hint: if you don't know what it is, then it is not encrypted).
MultiROM has 3 parts you need to install:
[*]MultiROM (multirom-YYYYMMDD-vXX-m7ul.zip) - download the ZIP file from second post and flash it in recovery.
[*]Modified recovery (TWRP_multirom_m7ul_YYYYMMDD.img) - download the IMG file from second post and use fastboot or Flashify app to flash it.
[*]Patched kernel - You can use either one of the stock ones in second post or third-party kernels which include the patch, you can see list in the second post. Download the ZIP file and flash it in recovery.
Click to expand...
Click to collapse
You current rom will not be erased by the installation.
Download links are in the second post.
Click to expand...
Click to collapse
FAQ
Click on this link
Adding ROMs
1. Android
Go to recovery, select Advanced -> MultiROM -> Add ROM. Select the ROM's zip file and confirm
Click to expand...
Click to collapse
2. Other Systems
Unfortunately, no other systems are available as of now. But, MultiROM _theoreticaly_ supports them - the principle should be the same as on grouper, we just need the systems. That's why the options in "Add ROM" menu in recovery are there, but do not flash systems for old Nexus 7 (grouper)!
Click to expand...
Click to collapse
Updating/changing ROMs
1. Primary ROM (Internal)
Flash ROM's ZIP file as usual, do factory reset if needed (it won't erase secondary ROMs)
Go to Advanced -> MultiROM in recovery and do Inject curr. boot sector.
Click to expand...
Click to collapse
2. Secondary Android ROMs
If you want to change the ROM, delete it and add new one. To update ROM, follow these steps:
Go to Advanced -> MultiROM -> List ROMs and select the ROM you want to update.
Select "Flash ZIP" and flash ROM's ZIP file.
Click to expand...
Click to collapse
Source code
MultiROM - https://github.com/oblikas/mr_device_m7ul
Modified TWRP - https://github.com/Tasssadar/Team-Win-Recovery-Project (branch master)
Kernel w/ kexec-hardboot patch - https://gist.github.com/Tasssadar/6733940
Click to expand...
Click to collapse
Downloads
1. Main downloads
MultiROM: multirom-20131217-v19a-UNOFFICIAL-m7ul.zip
Modified recovery: TWRP_m7ul_multirom-011414
Kernel w/ kexec-hardboot patch (CM 10.2): kernel_kexec_m7ul_cm102-2.zip
It should work with all ROMs.
Click to expand...
Click to collapse
2. third-party kernels with kexec-hardboot patch
check the FAQ
Click to expand...
Click to collapse
Donations
If you want to donate me,use the "Donate to me" button.
Donate to @Tasssadar. You can use either paypal or Bitcoins, his address is 172RccLB2ffSnJyYwjYbUD3Nx4QX3R8Ris
Thanks to all donors, it is much appreciated ​
Click to expand...
Click to collapse
Thanks @Giblet-dono for the FAQ code
This was such a great mod on my nexus 7. Happy to see it here for my HTC One as well
Sent from my HTC One using xda app-developers app
Hells YESSS !! , have this on my nexus 7 and it's the best thing ever .
---------- Post added at 05:51 PM ---------- Previous post was at 05:31 PM ----------
Wait, this is just for the International HTC One ?.
I've just installed the MultiROM modded recovery, but on my HTC One, the resolution is wrong. The recovery cuts off at the right side, so the back button in TWRP is almost completely off-screen and the second column of icons is more or less right-justified. This is a big problem when naming backups, for example, because the keyboard is also cut off and the rightmost keys are beyond the screen's margin. Currently making a backup, so I'll test the actual MultiROM functionality soon.
mastermind777 said:
I've just installed the MultiROM modded recovery, but on my HTC One, the resolution is wrong. The recovery cuts off at the right side, so the back button in TWRP is almost completely off-screen and the second column of icons is more or less right-justified. This is a big problem when naming backups, for example, because the keyboard is also cut off and the rightmost keys are beyond the screen's margin. Currently making a backup, so I'll test the actual MultiROM functionality soon.
Click to expand...
Click to collapse
You are on T Mobile ? .
It was originally a T-Mobile HTC One, which I modded (S-OFF, SuperCID, etc.)
mastermind777 said:
It was originally a T-Mobile HTC One, which I modded (S-OFF, SuperCID, etc.)
Click to expand...
Click to collapse
So that means i can't flash it on my Developer ATT One ?.
Subscribed
Sounds like a great idea. Not a big fan of Sense and no kernel for the latest GP ROM so gonna keep an eye on the development of this goodie.
Multumim anticipat
jawonder said:
Hells YESSS !! , have this on my nexus 7 and it's the best thing ever .
---------- Post added at 05:51 PM ---------- Previous post was at 05:31 PM ----------
Wait, this is just for the International HTC One ?.
Click to expand...
Click to collapse
I think it works on Super-CID'ed T-Mobile,Sprint,AT&T,Verizon too...
mastermind777 said:
I've just installed the MultiROM modded recovery, but on my HTC One, the resolution is wrong. The recovery cuts off at the right side, so the back button in TWRP is almost completely off-screen and the second column of icons is more or less right-justified. This is a big problem when naming backups, for example, because the keyboard is also cut off and the rightmost keys are beyond the screen's margin. Currently making a backup, so I'll test the actual MultiROM functionality soon.
Click to expand...
Click to collapse
Yeah,the recovery needs some resize.
Can we use only USB devices or can we use a part from internal memory?
Atze001 said:
Can we use only USB devices or can we use a part from internal memory?
Click to expand...
Click to collapse
You can flash ROMs on internal or on USB
oblikas said:
You can flash ROMs on internal or on USB
Click to expand...
Click to collapse
Ah Great!!
---------- Post added at 07:09 AM ---------- Previous post was at 06:11 AM ----------
Musst try again cause first attempt failed. On both Roms my wlan dont work
Atze001 said:
Ah Great!!
---------- Post added at 07:09 AM ---------- Previous post was at 06:11 AM ----------
Musst try again cause first attempt failed. On both Roms my wlan dont work
Click to expand...
Click to collapse
Check "Don't share " in TWRP when you flash a secondary ROM.
Sent from my Nexus 7 using xda app-developers app
oblikas said:
Check "Don't share " in TWRP when you flash a secondary ROM.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I try it and dont work. I think it was a kernel issue. Your Kernel dont work with EragonRC4.
My first rom is EragonRC4 (Sense based).
First I install EragonRC4 than I Flash your Recovery than your kernel and your multirom.zip. After that I boot up Eragon and wifi is gone
Atze001 said:
I try it and dont work. I think it was a kernel issue. Your Kernel dont work with EragonRC4.
My first rom is EragonRC4 (Sense based).
First I install EragonRC4 than I Flash your Recovery than your kernel and your multirom.zip. After that I boot up Eragon and wifi is gone
Click to expand...
Click to collapse
Of course it won't work .You can boot only CM/AOSP ROMs .
Sent from my Nexus 7 using xda app-developers app
oblikas said:
Of course it won't work .You can boot only CM/AOSP ROMs .
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
:crying:
oblikas said:
Of course it won't work .You can boot only CM/AOSP ROMs .
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Can we boot gpe rom + sense rom since they have the same kernel?
leventccc said:
Can we boot gpe rom + sense rom since they have the same kernel?
Click to expand...
Click to collapse
Try and let us know if it worked for you.
Sent from my HTC One using xda app-developers app

[RECOVERY][GT-S5280/2]TeamWin Recovery Project v2.6.3.0 (TWRP)

Team Win Recovery Project v2.6.3.0
Code:
Do at your own risk .. I would not be responsible for world war 3, pregnant girlfriend , UFO, dead phone so DON'T BLAME ME if you don't know what you are doing!
Remember i'm not the dev who made this recovery im sharing this on behalf of @link_lunk (Andiee Pratama) so if you have any queries you can pm here
Installation:
1. Download provided twrp zip from attachment
2. Push it to your extsd
3. Boot into your existing recovery ( CWM ) :silly:
4. Select provided zip and flash it
5. poweroff and boot into recovery
6. you can boot in to twrp mode by pressing same hardware keys you did for cwm
7. Done & Enjoy ​
After you boot into recovery you will see twrp menu
Go to Settings --> And untick everything
Done now you can flash your zip , backup , wipe data , etc​Downloads : https://drive.google.com/file/d/0B4wmcx9icZtxNGRkdXAyekNOVEk/edit
Credits : @link_lunk , cleverior [/MENTION] and you
For bugs Discussion : http://forum.xda-developers.com//galaxy-star/help/qa-teamwin-recovery-project-twrp-t3151524 thanks @QA Bot
Screens
Here
Reserved for Themes
Coming soon
corphish said:
Coming soon
Click to expand...
Click to collapse
Thanks we are waiting for themes
hey hey hey so can we start making android 4.2 and up or not ?
Wow finally TWRP for Our Device
LahKeda said:
hey hey hey so can we start making android 4.2 and up or not ?
Click to expand...
Click to collapse
I already booted CM10.2 (Android 4.3)
Sent from my C2104 using Tapatalk
corphish said:
I already booted CM10.2 (Android 4.3)
View attachment 3393877
View attachment 3393879
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
u are talking abiut that update ri8???
ShadeSK said:
u are talking abiut that update ri8???
Click to expand...
Click to collapse
which update?
is it working
corphish said:
I already booted CM10.2 (Android 4.3)
View attachment 3393877
View attachment 3393879
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
is it fixed...or bug free.???
flash cm10.1 Then connect ur device through wifi now check system updates
---------- Post added at 02:46 PM ---------- Previous post was at 02:46 PM ----------
www.droidviews.com/install-material-design-themes-for-twrp-recovery/
What about This Theme OP @Pikachu
ShadeSK said:
flash cm10.1 Then connect ur device through wifi now check system updates
---------- Post added at 02:46 PM ---------- Previous post was at 02:46 PM ----------
www.droidviews.com/install-material-design-themes-for-twrp-recovery/
What about This Theme OP @Pikachu
Click to expand...
Click to collapse
well the update you receive on com 10.1 (psychs build) is not for our device
so dont try to flash that or else you will have to lose your device
corphish has build cm10.2 from source and its highly unstable
btw we need to port twrp themes since it doesnot support on our screen resolution
scaling down images would work i think
Hungryhacker said:
is it fixed...or bug free.???
Click to expand...
Click to collapse
I just made it to boot. Nothing works.
Infact systemui force closes, I removed sysui to take the pic.
They mostly fc because of selinux.
I built CM10 as well and fixed internal storage.
ShadeSK said:
flash cm10.1 Then connect ur device through wifi now check system updates
---------- Post added at 02:46 PM ---------- Previous post was at 02:46 PM ----------
www.droidviews.com/install-material-design-themes-for-twrp-recovery/
What about This Theme OP @Pikachu
Click to expand...
Click to collapse
LOL.
No the CM10.2 is built by me.
corphish said:
I just made it to boot. Nothing works.
Infact systemui force closes, I removed sysui to take the pic.
They mostly fc because of selinux.
I built CM10 as well and fixed internal storage.
LOL.
No the CM10.2 is built by me.
Click to expand...
Click to collapse
I remember that we needed to CWM 6.4 or higher to boot Kitkat at all , can you continue developing your CM ?
LahKeda said:
I remember that we needed to CWM 6.4 or higher to boot Kitkat at all , can you continue developing your CM ?
Click to expand...
Click to collapse
I have CM10.2 sources (without repo)
corphish said:
I just made it to boot. Nothing works.
Infact systemui force closes, I removed sysui to take the pic.
They mostly fc because of selinux.
I built CM10 as well and fixed internal storage.
LOL.
No the CM10.2 is built by me.
Click to expand...
Click to collapse
Hell Yeah Good work But Hope u can fix it soon And bro anynews about fixing ril?? Cuz i'm still waiting for that fixed
ShadeSK said:
Hell Yeah Good work But Hope u can fix it soon And bro anynews about fixing ril?? Cuz i'm still waiting for that fixed
Click to expand...
Click to collapse
Well I was very close, got RIL to connect just like stock, but dont know why got f*cked at last
corphish said:
I already booted CM10.2 (Android 4.3)
View attachment 3393877
View attachment 3393879
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Hey Please provide me the link of cm 10.2 and is all the problems and bugs that we faced in cm 10 for our device is now fixed...???
Sent from my GT-S5282 using XDA Free mobile app
grdharsh19 said:
Hey Please provide me the link of cm 10.2 and is all the problems and bugs that we faced in cm 10 for our device is now fixed...???
Sent from my GT-S5282 using XDA Free mobile app
Click to expand...
Click to collapse
No they aren't fixed.
And CM10.2 is very unstable, systemUI force closes everytime, making it impossible to explore what's left of it.
Ohk..... and thanks for your effort ..... and we will wait for the fixes..... i know you can do this....!!!!
Sent from my GT-S5282 using XDA Free mobile app

MIUI 6.9.29 Marshmallow [CM 13 Based][17-12-2016]

So This is first Miui Dev Rom based on Marshmallow...
All Thanks to original DEV THOR TIGER.... and Kuma sir for cm13
In latest Build google keyboard added. And now No more chinese apps
Whats Working..
1. Ril
2. wifi
3. camera
4. Bluetooth
5. LTE and VoLTE
6. LED
7.GPS(not tried)
8.Sensors
9. Audio
10. Video recording
11. Camera
Whats not working
1. network signal not showing. But Some Users are getting Sim Loaded.
2. Video calling on VoLte
3. Swapping Data sim card gives reboot. And then it gets bootloop. Then go to recovery and just dirty flash the MIUI MM 2 rom zip again and it will get fine.
you tell more
DOWNLOADS
MIUI Marshmallow THIRD
MINIMAL A-Gapps
How to flash
1. Download Miui_MM_3_Redmi2.zip and a-gapps package.
2. Reboot to twrp recovery
3. make backup of current rom
4. Now wipe data, cache, system and dalvik cache
5. now flash Miui_MM_3_Redmi2.zip and a-gapps
6. when flashing completes reboot to system
7. wait till rom boots, and it will take some time to load miui 8 setup.
Note. It shows no sim card...but dont worry it is fine. Sims are loaded properly ...
for Volte and data you need to set APN in setting.
Note2- Only for porters. If anyone is trying porting and editing chinese rom...and you want to delete chinese apps...you only need to delete superSU zip in rom. Chinese devs are containing their chinese app in SuperSu zip.
SOURCES
1. Kernel Source--https://github.com/CyanogenMod/android_kernel_wingtech_msm8916 (BlackHawk Kernel)
2. Vendors--https://github.com/TheMuppets/proprietary_vendor_wingtech
Credits:
@ketut.kumajaya, Thor Tiger, Me
If someone is missed...just tell me i will add.:fingers-crossed....:fingers-crossed:
Congratulations to your work. Is it supporting multiwindow like cm13
Wow miui skin in cm thanks to your innovative idea
Thread Updated with Download link......
Keyboard Not Showing
Keyboard is not working/showing on First Setup. Im using Spanish. Thanks in advance.
ShainaGlowy said:
Keyboard is not working/showing on First Setup. Im using Spanish. Thanks in advance.
Click to expand...
Click to collapse
oh srry i forgot to mention....keyboard is removed because it was chinese and i didnt added any other keyboard to reduce rom size....
you can skip skip setup...and then install any keyboard apk from backup and then enable it ....
it will work fine...
thank you for reminding me....
saurabh1234 said:
oh srry i forgot to mention....keyboard is removed because it was chinese and i didnt added any other keyboard to reduce rom size....
you can skip skip setup...and then install any keyboard apk from backup and then enable it ....
it will work fine...
thank you for reminding me....
Click to expand...
Click to collapse
I cant skip setup because in my previous miui rom i was signed in....so it asks me to type in my password stating this device was signed in using an account.
Im in love with this rom it was kind of my dream...please help
aishik2015 said:
I cant skip setup because in my previous miui rom i was signed in....so it asks me to type in my password stating this device was signed in using an account.
Im in love with this rom it was kind of my dream...please help
Click to expand...
Click to collapse
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
saurabh1234 said:
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
Click to expand...
Click to collapse
Thank you for your fast response sir.
I will try it.
You might want to add this to the notes too for other people who might have the same problem
saurabh1234 said:
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
Click to expand...
Click to collapse
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
aishik2015 said:
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
Click to expand...
Click to collapse
ok...i will do something...
now i am travelling...
till then can you try one thing...
restore your old miui backup and turn off find device...
use that miui for 10-30 min with data ON
then flash this rom...
and then check is it saying same...
aishik2015 said:
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
Click to expand...
Click to collapse
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
based on kuma kernel or jerrica ?
saurabh1234 said:
ok...i will do something...
now i am travelling...
till then can you try one thing...
restore your old miui backup and turn off find device...
use that miui for 10-30 min with data ON
then flash this rom...
and then check is it saying same...
Click to expand...
Click to collapse
Will I dirty flash this ROM or after wiping ?
---------- Post added at 10:37 AM ---------- Previous post was at 10:36 AM ----------
saurabh1234 said:
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
Click to expand...
Click to collapse
I tried this in the beginning it didn't work
saurabh1234 said:
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
Click to expand...
Click to collapse
Do something please.
aishik2015 said:
Do something please.
Click to expand...
Click to collapse
i m on vacation..u need to wait for 10-15 days
zieruchan said:
based on kuma kernel or jerrica ?
Click to expand...
Click to collapse
kuma
ROM Looks great. But have some doubt
1) is this based on lollipop firmware?
2) does this make worse experience in 1gb ram phone? Like miui LP ROM.
I hope that network indication is fixed soon...thx
@saurabh1234 I wanna know a few thing before going to see it in action.
1. Is original MIUI framework is included in this ROM? Means will it support MIUI themes?
2. What is the structure of the zip? Does it contain separate data and system image along with all the loaders like MIUI or just the system.img like most other CM ROMs?
3. What about OTA and update stuff?
iamsubhranil said:
@saurabh1234 I wanna know a few thing before going to see it in action.
1. Is original MIUI framework is included in this ROM? Means will it support MIUI themes?
2. What is the structure of the zip? Does it contain separate data and system image along with all the loaders like MIUI or just the system.img like most other CM ROMs?
3. What about OTA and update stuff?
Click to expand...
Click to collapse
1. yes miui themes working... I tried only 2-5 themes...
2. It is a dirty port taking cm13 as base. So it is not containing data and system seperate images or .dat file...
It is having file system same as KK rom zip files.
3. Ota will not work.

Moto G6 Play [Jeter][Aljeter] JeterPie [ROM] Updated 3.5.2020

Hello!
This ROM is for devices Jeter (Xt1922-7) & *NEW* Aljeter (Xt1922-5) and is based on our most current Pie security patches. For Jeter that is PCP29.118-67 and for Aljeter that is PPP29.55-35-18. Please do not flash these ROM's if you are not on this security patch currently whether it is by updating OTA or otherwise or on a device not listed. If you do, you may face unexpected results and I will not be able to help you. Flash at your own risk.
How to Flash:
Boot into TWRP and make a full backup first!
1.Place ROM on your external SD card and do a full wipe except external SD Card.
2.Flash ROM. Magisk is included with my Custom *modified builds and will flash with the ROM. Download the latest magisk manager.apk from the Play Store or XDA to use root features.
3.Flash DM verity+Force Encrytion disabler patch and if desired, Permissive SEpolicy patcher.
4.Go back to wipe section of twrp and format data by typing YES when prompted.
5.Reboot and ENJOY!
If a problem arises, I may need you to replicate it and upload a log.
ROM FEATURES:
Root via Magisk with safetynet passing with Magisk Hide.
Su.d Support
Busybox
SQlite Support
Zipaligned
Debloated
TWRP flashable zip
Please download and get back to me with the results. There are TWO VERSIONS for each device, one is a completely untouched and unrooted Stock ROM for new users or those who went too far modding and need to start fresh and the other IS rooted and has the features I listed above. Thank you for testing and your feedback.
Sands207 =)
Download https://drive.google.com/folderview?id=1mDl7qc8F1qKUf95z4IWLWcNwMIMXkluC
Donate? Link on my profile
Block my account Android
Albert ledesma3rd said:
Block my account Android
Click to expand...
Click to collapse
what do you mean?
N
Sands207 said:
what do you mean?
Click to expand...
Click to collapse
I have no idea, I might try this ROM out, it looks fun. I've currently got mine on stock. Do you recommend clean flashing or dirty flashing the rom? Never mind, read through the post. Problem: I have no external storage. I generally use the TWRP and encrypted data fix by @skullkid383 to have access to my storage.
the-her0 said:
N
I have no idea, I might try this ROM out, it looks fun. I've currently got mine on stock. Do you recommend clean flashing or dirty flashing the rom? Never mind, read through the post. Problem: I have no external storage. I generally use the TWRP and encrypted data fix by @skullkid383 to have access to my storage.
Click to expand...
Click to collapse
If you can link me to the fix I can incorporate it into the next build provided I am granted permission to do so
No probs, it was posted in the wrong section (as it was original development, not a guide) https://forum.xda-developers.com/g6-play/how-to/updated-g6-play-jeter-twrp-decrypt-guide-t3886165
---------- Post added at 07:00 PM ---------- Previous post was at 06:47 PM ----------
I am, actually, wondering if I could try to install it in a way I'm used to, (wipe everything except internal storage, flash, install the encryption fix). I'll provide feedback on success or failure.
the-her0 said:
No probs, it was posted in the wrong section (as it was original development, not a guide) https://forum.xda-developers.com/g6-play/how-to/updated-g6-play-jeter-twrp-decrypt-guide-t3886165
---------- Post added at 07:00 PM ---------- Previous post was at 06:47 PM ----------
I am, actually, wondering if I could try to install it in a way I'm used to, (wipe everything except internal storage, flash, install the encryption fix). I'll provide feedback on success or failure.
Click to expand...
Click to collapse
Excellent. Thank you for your help ?
A quick question, is this was built via a kitchen? If so, which kitchen did you use? I've not had much luck with using my go to while messing with making my own ROMs.
the-her0 said:
N
I have no idea, I might try this ROM out, it looks fun. I've currently got mine on stock. Do you recommend clean flashing or dirty flashing the rom? Never mind, read through the post. Problem: I have no external storage. I generally use the TWRP and encrypted data fix by @skullkid383 to have access to my storage.
Click to expand...
Click to collapse
Encrypted data fix? None of the TWRP builds can decrypt data. The fix is to unencrypt your data partition. Is that what you're talking about? A zip that disables forced encryption? That's not really an encryption fix, it's removing forced encryption.
I will wait until this rom is made on 9.0 Stock before I start testing it as I've recently updated my Boost Mobile Jeter to 9.0
PimpMy5Ton said:
I will wait until this rom is made on 9.0 Stock before I start testing it as I've recently updated my Boost Mobile Jeter to 9.0
Click to expand...
Click to collapse
I have a 9.0 ROM available for testing as of this morning
Lemme get in on this. I can take a log, been fooling with ROMs for a long time, not like I used to, but I got a new job with ample free time to burn up
Sent from my [device_name] using XDA-Developers Legacy app
whodisname said:
Lemme get in on this. I can take a log, been fooling with ROMs for a long time, not like I used to, but I got a new job with ample free time to burn up
Click to expand...
Click to collapse
Get in touch via pm
Sands207 said:
Get in touch via pm
Click to expand...
Click to collapse
I did.
Sent from my [device_name] using XDA-Developers Legacy app
OP updated.
whodisname said:
I did.
Click to expand...
Click to collapse
new build up!
some screenshots
@Sands207
Apn for virgin mobile
madbat99 said:
@Sands207
Apn for virgin mobile
Click to expand...
Click to collapse
Thanks, I'll add that in and upload a new version shortly.
Edit: @madbat99 The ROM is using the same apns.conf currently so Virgin should already be supported. I compared them in Meld and they are identical. Is your LTE not working?
Sands207 said:
Thanks, I'll add that in and upload a new version shortly.
Edit @madbat99 The ROM is using the same apns.conf currently so Virgin should already be supported. I compared them in Meld and they are identical. Is your LTE not working?
Click to expand...
Click to collapse
I figured it was in there if you used the stock one. Should be Sprint, Virgin, and Boost.

Categories

Resources