So This is first Miui Dev Rom based on Marshmallow...
All Thanks to original DEV THOR TIGER.... and Kuma sir for cm13
In latest Build google keyboard added. And now No more chinese apps
Whats Working..
1. Ril
2. wifi
3. camera
4. Bluetooth
5. LTE and VoLTE
6. LED
7.GPS(not tried)
8.Sensors
9. Audio
10. Video recording
11. Camera
Whats not working
1. network signal not showing. But Some Users are getting Sim Loaded.
2. Video calling on VoLte
3. Swapping Data sim card gives reboot. And then it gets bootloop. Then go to recovery and just dirty flash the MIUI MM 2 rom zip again and it will get fine.
you tell more
DOWNLOADS
MIUI Marshmallow THIRD
MINIMAL A-Gapps
How to flash
1. Download Miui_MM_3_Redmi2.zip and a-gapps package.
2. Reboot to twrp recovery
3. make backup of current rom
4. Now wipe data, cache, system and dalvik cache
5. now flash Miui_MM_3_Redmi2.zip and a-gapps
6. when flashing completes reboot to system
7. wait till rom boots, and it will take some time to load miui 8 setup.
Note. It shows no sim card...but dont worry it is fine. Sims are loaded properly ...
for Volte and data you need to set APN in setting.
Note2- Only for porters. If anyone is trying porting and editing chinese rom...and you want to delete chinese apps...you only need to delete superSU zip in rom. Chinese devs are containing their chinese app in SuperSu zip.
SOURCES
1. Kernel Source--https://github.com/CyanogenMod/android_kernel_wingtech_msm8916 (BlackHawk Kernel)
2. Vendors--https://github.com/TheMuppets/proprietary_vendor_wingtech
Credits:
@ketut.kumajaya, Thor Tiger, Me
If someone is missed...just tell me i will add.:fingers-crossed....:fingers-crossed:
Congratulations to your work. Is it supporting multiwindow like cm13
Wow miui skin in cm thanks to your innovative idea
Thread Updated with Download link......
Keyboard Not Showing
Keyboard is not working/showing on First Setup. Im using Spanish. Thanks in advance.
ShainaGlowy said:
Keyboard is not working/showing on First Setup. Im using Spanish. Thanks in advance.
Click to expand...
Click to collapse
oh srry i forgot to mention....keyboard is removed because it was chinese and i didnt added any other keyboard to reduce rom size....
you can skip skip setup...and then install any keyboard apk from backup and then enable it ....
it will work fine...
thank you for reminding me....
saurabh1234 said:
oh srry i forgot to mention....keyboard is removed because it was chinese and i didnt added any other keyboard to reduce rom size....
you can skip skip setup...and then install any keyboard apk from backup and then enable it ....
it will work fine...
thank you for reminding me....
Click to expand...
Click to collapse
I cant skip setup because in my previous miui rom i was signed in....so it asks me to type in my password stating this device was signed in using an account.
Im in love with this rom it was kind of my dream...please help
aishik2015 said:
I cant skip setup because in my previous miui rom i was signed in....so it asks me to type in my password stating this device was signed in using an account.
Im in love with this rom it was kind of my dream...please help
Click to expand...
Click to collapse
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
saurabh1234 said:
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
Click to expand...
Click to collapse
Thank you for your fast response sir.
I will try it.
You might want to add this to the notes too for other people who might have the same problem
saurabh1234 said:
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
Click to expand...
Click to collapse
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
aishik2015 said:
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
Click to expand...
Click to collapse
ok...i will do something...
now i am travelling...
till then can you try one thing...
restore your old miui backup and turn off find device...
use that miui for 10-30 min with data ON
then flash this rom...
and then check is it saying same...
aishik2015 said:
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
Click to expand...
Click to collapse
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
based on kuma kernel or jerrica ?
saurabh1234 said:
ok...i will do something...
now i am travelling...
till then can you try one thing...
restore your old miui backup and turn off find device...
use that miui for 10-30 min with data ON
then flash this rom...
and then check is it saying same...
Click to expand...
Click to collapse
Will I dirty flash this ROM or after wiping ?
---------- Post added at 10:37 AM ---------- Previous post was at 10:36 AM ----------
saurabh1234 said:
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
Click to expand...
Click to collapse
I tried this in the beginning it didn't work
saurabh1234 said:
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
Click to expand...
Click to collapse
Do something please.
aishik2015 said:
Do something please.
Click to expand...
Click to collapse
i m on vacation..u need to wait for 10-15 days
zieruchan said:
based on kuma kernel or jerrica ?
Click to expand...
Click to collapse
kuma
ROM Looks great. But have some doubt
1) is this based on lollipop firmware?
2) does this make worse experience in 1gb ram phone? Like miui LP ROM.
I hope that network indication is fixed soon...thx
@saurabh1234 I wanna know a few thing before going to see it in action.
1. Is original MIUI framework is included in this ROM? Means will it support MIUI themes?
2. What is the structure of the zip? Does it contain separate data and system image along with all the loaders like MIUI or just the system.img like most other CM ROMs?
3. What about OTA and update stuff?
iamsubhranil said:
@saurabh1234 I wanna know a few thing before going to see it in action.
1. Is original MIUI framework is included in this ROM? Means will it support MIUI themes?
2. What is the structure of the zip? Does it contain separate data and system image along with all the loaders like MIUI or just the system.img like most other CM ROMs?
3. What about OTA and update stuff?
Click to expand...
Click to collapse
1. yes miui themes working... I tried only 2-5 themes...
2. It is a dirty port taking cm13 as base. So it is not containing data and system seperate images or .dat file...
It is having file system same as KK rom zip files.
3. Ota will not work.
Related
Note: Whoever is able to boot into the rom without system ui fc pls post
1. The ROM which u were running before
2. CWM recovery version/link to that.
3. And step wise info of flashing.
4. And if installed gapps then link to that
This can help other users. Thanx
While everyone was searching for an ANDROID L AOSP by Ivan I found this on miui forum.
A bootable CM12 .
The screenshots i have posted.
The bug we are facing in this is unlimited system ui fc's. But the rom is booting and some what working too. if we can give our contribution we might have everything working.
Found from:
http://www.miui.com/thread-2152863-1-1.html
Credits also to him.
download link:
https://www.androidfilehost.com/?fid=95832962473396938
PS I know there are many posts on this but people might not know about this release so creating a new one
And yeah this isn't my work
yes tried it too same FCs problem. hope the guy who made that could say few words about it!
Did you try flash gapps for android 5.0 ?
hiphopboy said:
Did you try flash gapps for android 5.0 ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=57254997&postcount=77
I mean flash cm gapps ! He flash gapps mini i think from another source
i tried with normal gapps found here in the forum, not cm gapps. do you have a link for the cm gapps? so I may try with them too when I have got some spare time
I think here : http://www.naldotech.com/download-and-install-gapps-for-android-5-0-lollipop/
But is it really gapps related issue ?
Archmag3 said:
But is it really gapps related issue ?
Click to expand...
Click to collapse
don't think so, because even without flashing gapps, you continuosly get the system UI FCs since first boot
Testing
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
moly82 said:
don't think so, because even without flashing gapps, you continuosly get the system UI FCs since first boot
Click to expand...
Click to collapse
seems more like framework related issue...expert opinion needed. btw is someone keeping check on that thread in miui forum ?
gau20 said:
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
Click to expand...
Click to collapse
did the same, didn't work here.
just curious, maybe a language problem? Actually here it automatically selected Italian language during wizard. What language are you using?
Most of us are not even successful in making up with the fcs. But still happy about the fact that there is some progress in the development. But we all must be eagerly waiting for Ivan's lollipop
moly82 said:
did the same, didn't work here.
just curious, maybe a language problem? Actually here it automatically selected Italian language during wizard. What language are you using?
Click to expand...
Click to collapse
I just flashed the rom, wiped data and rebooted
no setup wizard direct home screen without any force close.
maybe try flashing these gapps.... http://fitsnugly.euroskank.com/dl.php?file=banks/gapps/gapps-L-minimal-signed-11-23-14.zip
Does someone know if the dev published the device tree used to compile the rom?
I guess he used github.com/keyur2maru/android_device_xiaomi_cancro since it's his and seems updated to L.
gau20 said:
I just flashed the rom, wiped data and rebooted
no setup wizard direct home screen without any force close.
maybe try flashing these gapps.... http://fitsnugly.euroskank.com/dl.php?file=banks/gapps/gapps-L-minimal-signed-11-23-14.zip
Click to expand...
Click to collapse
getting the FCs even without the gapps, so it is not a gapps problem for me. what language are you on after flashing the rom and correctly getting to the homescreen?
NisseCool said:
I guess he used github.com/keyur2maru/android_device_xiaomi_cancro since it's his and seems updated to L.
Click to expand...
Click to collapse
Yes you are right. This is what i also came to know.
gau20 said:
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
Click to expand...
Click to collapse
What was your;
CWM version and link?
ROM before flash?
And any settings related to how your phone boots?
Thanks.
PS: Going to try flashing it, just going to make a backup real fast.
gau20 said:
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
Click to expand...
Click to collapse
Did you install gapps?
Steps to flash:
NOTE : Use only one sim in first boot.
1. Download rom,supersu and gapps.
2.Save it in internal storage . (UNMOUNT SYSTEM AND CACHE VIA TWRP THEN ONLY START FLASHING PROCESSES)
3. Flash rom,then gapps and then supersu in one GO .First boot itsef(VERY IMPORTANT STEP) OR else gapps wont work (Added Fix below if gapps still dont work)
4.Wipe dalvik and cache reboot enjoy.First boot takes time
REMEMBER FIRST BOOT TAKE SOME TIME. AROUND 15MIN. IT WILL BE IN BOOTANIMATION. SO DONT WORRY
NOTE : (Remove gapps flashing in 3rd step for this FIX)
For those having trouble booting into the rom after flashing, or adding one or more google accounts there is a workaround that I found here on the Meizu forums.
Basically you just need to follow all of the steps in the OP. However, do not flash Gapps!! After booting into the system and completing the initial setup, open App Center, search for the app Google Installer, open the apps history, and download one of the older versions that is 30+mb (the newer versions are about 2-3mb). Install Google Installer, open it, then install Gapps from there. Then you should be able add your google account/s.
Thanks @chr0nic_flashr
Note for stuck in login for some users :
1--- If you get stuck after flashing gapps then reboot to twrp.
2--- Mount system partition.
3--- go to filemangaer in TWRP. goto location system/privapp
4--- find the folder setup wizard. Delete it reboot system. you wont be in stuck anymore
:Note
1. This ROM include the 3 way slider,Laser Auto Focus,Hydrogen Camera and Fingerprint
2. This ROM is base on Hydrogen OS 1.2,it contain some of the original(Hydrogen OS) feature. (Fingerprint security inbuild in ROM now so no need to flash Hydrogenos before flashing flyme)
CHANGELOG :
4.5.4.3R_20151220: (Version 3) (LATEST)
1.GPS signal lost when using navigation apps.(Fixed)
2.Added material design.
3.ROM is now support DPI customization.(Root is necessary)
4.Upgrade to 4.5.4.3R
5.SIM card selection problem.(Fixed)
NOTE :When you are using Fingerprint to unlock,if you use PIN to unlock your phone instead,it may cause the home key become not sensitive.
12-JANUARY-2016 (Upstream in Flymeos Code)
4.5.4.4R_20160112:
1. Upgrade to the latest 4.5.4.4R Flyme Codes
Please select the latest 4.5.4.4R complete package ,
4.5.4.3 user can choose to upgrade OTA package
Known Bug:
None For Now.If you find. report
About the 3 way slider:
Unlike the CM or Hydrogen OS,it don't have a GUI clearly state the mode.
Up side is silent
Middle side is vibrate
Down side is all
Download Link:
ROM
h[STRIKE]ttp://pan.baidu.com/s/1KboOu[/STRIKE] (old) (version 1)
18-DECEMBER-2015
http://pan.baidu.com/s/1KboOu (version2)
https://drive.google.com/file/d/0BzMzLuBx4Rx2MjBFZmdKSnNpUUk/view?pref=2&pli=1 (mirror v2 google drive)
22-DECEMBER-2015
https://mega.nz/#!HV12mSIQ!jm0rjJoy-0PpJ-Spyi28ewHc4PchN5B001GxfaEv5U0
https://drive.google.com/file/d/0B0gLY7vcXplzb1V3ZEt5Q2YtOXM/view
12-JANUARY-2016
Full Rom : http://pan.baidu.com/s/1o6S9tto
(Not Tested) Incremental Update : http://pan.baidu.com/s/1KboOu
Google Drive Mirrors
Full ROM :
https://drive.google.com/file/d/0B0gLY7vcXplzRXFCY1gwOTFoQ3M/view?usp=sharing
OTA :
20151220--->20160112
https://drive.google.com/file/d/0B0gLY7vcXplzRTNPRm5FUm0xR3c/view?usp=sharing
GAPPS :
https://drive.google.com/file/d/0BwhIwerYs3cdbVVpMXRhbVoycDA/view?pref=2&pli=1
Video Review
https://www.youtube.com/watch?v=wvaIteeV0iI
Thanks @tonisauffa
SOME SCREENShOTS
I'm downloading this OS but that server is extremely slow in the US, thanks for sharing mate
dark_topo said:
I'm downloading this OS but that server is extremely slow in the US, thanks for sharing mate
Click to expand...
Click to collapse
Yes baidu i slow everywhere
please mirror it to google drive if possible.so it can help many
And dont forget flash and use h20s 1.2. use fimgerprint reader and then go to recovery wipe everything and then flash fymeos for fp TO WORK
Downloading at 200 kb/sec. Says 1 hour to complete. I can upload to mirror when it's done. Is that ok?
jjbro007 said:
Yes baidu i slow everywhere
please mirror it to google drive if possible.so it can help many
And dont forget flash and use h20s 1.2. use fimgerprint reader and then go to recovery wipe everything and then flash fymeos for fp TO WORK
Click to expand...
Click to collapse
I'll provide you a Google drive link in some time.. Can you please tell me would this work with DualBoot patcher??
Edit I can't get the file downloaded..
Says 25 minutes. I have 1 gbps up so it should take no time to upload to google drive.
EDIT: Just slowed down a ton. Didn't seem to stop but went from 200kb/sec for the first 40 minutes to 40 kb/sec. Might take longer than expected.
Guess I should reply instead of edit so post refreshes.
Google drive mirror link in post above this one.
Bsanborn said:
Says 25 minutes. I have 1 gbps up so it should take no time to upload to google drive.
EDIT: Just slowed down a ton. Didn't seem to stop but went from 200kb/sec for the first 40 minutes to 40 kb/sec. Might take longer than expected.
Left and came back. MD5 matches. Here's mirror: https://drive.google.com/file/d/0B8ZjpnCJKuXzWlBnMFMzbHJWRkk/view
Click to expand...
Click to collapse
Thanks for thiss.. Btw can u xplain how to flash rom with working fp .. In simple lang
neelsolanki said:
Thanks for thiss.. Btw can u xplain how to flash rom with working fp .. In simple lang
Click to expand...
Click to collapse
No idea. I just hosted the mirror, don't plan on flashing it. I'm holding out for CM13.
neelsolanki said:
Thanks for thiss.. Btw can u xplain how to flash rom with working fp .. In simple lang
Click to expand...
Click to collapse
I think u forgot to remove security in link bro
---------- Post added at 08:13 AM ---------- Previous post was at 08:13 AM ----------
Bsanborn said:
No idea. I just hosted the mirror, don't plan on flashing it. I'm holding out for CM13.
Click to expand...
Click to collapse
I think u forgt to remove security from gd link
neelsolanki said:
I think u forgot to remove security in link bro
---------- Post added at 08:13 AM ---------- Previous post was at 08:13 AM ----------
I think u forgt to remove security from gd link
Click to expand...
Click to collapse
Says anyone with a link can view. Are you getting an error?
---------- Post added at 01:23 AM ---------- Previous post was at 12:33 AM ----------
Bsanborn said:
Says anyone with a link can view. Are you getting an error?
Click to expand...
Click to collapse
Here, this one should work: https://drive.google.com/folderview?id=0B8ZjpnCJKuXzS2Fma193X0E0MG8&usp=sharing
neelsolanki said:
Thanks for thiss.. Btw can u xplain how to flash rom with working fp .. In simple lang
Click to expand...
Click to collapse
actually FP working is easy.
1--- First flash h20s 1.2 . boot it. Then u must save you fingerprint and password or pattern in that rom .(You cant change pass or pattern after you boot into fymeos)
2--- got to recovery. wipe system,data,cache and dalvik. Then flash flymeos. boot it. Do go to security section. You will get wrong password error.
Now Try. If any error come and ask
Hope i help You.If i help please Hit the Thanks Button
Mehul.S said:
I'll provide you a Google drive link in some time.. Can you please tell me would this work with DualBoot patcher??
Edit I can't get the file downloaded..
Click to expand...
Click to collapse
Actually with dualboot it must work. but u must be running H20s as primary. i will comfirm it later. But from logic it must work.
and also if you use in dualboot you wont be able to use the security section in rom (I mean you wont be able to change password in flymeos)
Getting GSM network disconnect, lag (more than on OOS), had to remove SetupWizzard apk from system/app to get device in homescreen. Overall nice rom, but i would not use it as daily driver. FP, LA working fine.
acmerw said:
Getting GSM network disconnect, lag (more than on OOS), had to remove SetupWizzard apk from system/app to get device in homescreen. Overall nice rom, but i would not use it as daily driver. FP, LA working fine.
Click to expand...
Click to collapse
Hope you have no read OP. you must not use dual sim while booting. lag wont be ther if you did everything properly. btw home button lag will be there if you need FP scanner. Anyway fix will come soon . An try a custom kernel.report if working. use AK v23 oos version. AK v21 oos will be better
for me no sim network..nor any notification tone for whats app ?? tried through wifi
jjbro007 said:
Hope you have no read OP. you must not use dual sim while booting. lag wont be ther if you did everything properly. btw home button lag will be there if you need FP scanner. Anyway fix will come soon . An try a custom kernel.report if working. use AK v23 oos version. AK v21 oos will be better
Click to expand...
Click to collapse
I'm using single sim, still lags as hell. On H2OS custom kernel breaks camera functionality.
acmerw said:
I'm using single sim, still lags as hell. On H2OS custom kernel breaks camera functionality.
Click to expand...
Click to collapse
Ok i am finding the reason behind it. $g users in chinese site said about lag. 2g have no lag i guess. change to 2g and try.
Delete.
Congratulations man. Its great team to be in.
Device: G928C
Rom: CyanogenMod 13
Kernel: Mynogen
Congratulations ,well done job
Interesting , ?
Camera doesn't work.
Well done
Sent from my SM-N920T using XDA-Developers mobile app
lkiiii said:
Camera doesn't work.
Click to expand...
Click to collapse
What kernel did you flash with it?
Milly7 said:
What kernel did you flash with it?
Click to expand...
Click to collapse
Doesn't matter the camera just doesn't work yet
Sorry fellas. Just waiting for a friend who helps me with the building. Camera doesn't work but that is definitely on the list.
Thanks and sorry for the wait. Soon as I get the clear, I'll update OP.
Thank you so much, will report back as soon as done.
I'm happy I finally got to install, Nor audio calls neither Soft keys, text messages are working same as data, youtube, music, chrome, this a good beginning.
I installed the version 3 from the link given (S6 Edge +)
Thank you again.
Thank you so much for your Note 5 support
Updated OP guys.
hey I downloaded a cm rom from the sprint note 5 section and tried your kernel. I got about 2 to 3 reboots and then it stops. my data is also not working. can you help
rudeboy87 said:
hey I downloaded a cm rom from the sprint note 5 section and tried your kernel. I got about 2 to 3 reboots and then it stops. my data is also not working. can you help
Click to expand...
Click to collapse
Hello and thanks for trying.. So it eventually booted? Supesu can cause those kind of reboots while it sets up. . The cm was was made for Tmobile and international.. You could try to make sure apn is right and change your data connection. Like from 4g to 3g. Sometimes that triggers it. And what modem are you using?
not sure what modem I'm using. Can you point me to one that may fix the issue? also I downloaded the rom you mentioned in the op and it booted with no reboots with your kernel. Reboots happen when I use a cm rom from the sprint side
rudeboy87 said:
not sure what modem I'm using. Can you point me to one that may fix the issue? also I downloaded the rom you mentioned in the op and it booted with no reboots with your kernel. Reboots happen when I use a cm rom from the sprint side
Click to expand...
Click to collapse
Then it would probably be due to the sprint CyanogenMod. I can't tell you how stable they are as I have an SM-N920I.. But if you tried the other Cm. Do you get data?
LiL_Assassin said:
Then it would probably be due to the sprint CyanogenMod. I can't tell you how stable they are as I have an SM-N920I.. But if you tried the other Cm. Do you get data?
Click to expand...
Click to collapse
no I didn't get data at all. tried to enable it in rom but it wont work. maybe its on my end
rudeboy87 said:
no I didn't get data at all. tried to enable it in rom but it wont work. maybe its on my end
Click to expand...
Click to collapse
Try checking your apns and that they are correct. And changing.. If that doesn't work.. It might because of sprint device. Fingers crossed.
LiL_Assassin said:
Hello guys! After a few months I decided to look into building a CyanogenMod Kernel for our beloved Note 5.
It is very much a work in progress and any issues should be reported here, please make any backup efs back ups, and nandroids
Link to download cm13 by rainbow dash. Please download this first and then download this kernel... As that is what I am using as my daily driver and if you have random reboots there are ways to fix that. Just report what is making you reboot and I will help you as much as I can. It is still a very beta build!
http://forum.xda-developers.com/s6-edge-plus/orig-development/cyanogenmod-13-unofficial-t3384252
Camera doesn't work.
Some apps don't work unless you personally remove it's libs and stop them from generating. (eg chomp sms on message send)
Source code: https://drive.google.com/file/d/0B8Ps-jVB8IblU0xRWTZUdDlMZ3c/view?usp=docslist_api
Credits @Konsstantine34 @Rainbow_Dash @UpInTheAir (a huge mentor and alot of respect) @A Close friend. @RaymanFX for his first build of cm13 for our device.
[UPDATE!] Due to unforeseen things. I must upload it as a boot.img download it and flash it via twrp and make sure to be able to view Img. Update will soon follow with a proper zip. Please make a backup and report back, any issues. Camera still does not work! Report back with any other issues! Or reboots.
https://www.dropbox.com/sh/7f7979c3fiq4016/AAAPgzCwjArGBd67TV8b3wMHa?dl=0
Click to expand...
Click to collapse
How can I flash your boot file. When I click install twrp doesn't see the .IMG extension.
CHE1 said:
How can I flash your boot file. When I click install twrp doesn't see the .IMG extension.
Click to expand...
Click to collapse
In install menu select install image(right side) then select img then tick boot and swipe to install. When installing zips select install zip back again
Or install an app called flashify and select that img as kernel and flash
ROM ZenUI 3.0- ported from Asus Pegasus 3 Asus X008D
By DEV: Sandeep Sethi (adeveloper79)
https://www.facebook.com/adev79
———-ABOUT ROM———
-Rooted
-Multilang
-Asus Apps
-Asus PixelMaster Camera
-Asus Moblie Manager
-And More…..
BUG: dt2w for Double tap 2 wake use my new kernel Renice V4
*Note*: After Reboot Settings FC, Calendar FC (Click OK)
Calendar u can uninstall*
————-Instalation————
1. go to twrp recovery
2. WIPE> wipe (cache,dalvik,system and data), factory reset
3. INSTALL>install: open folder where u downloaded
Choose ZenUI.zip and click flash (install) *if failed click WIPE (dalvik and cache) go back choose REBOOT> reboot to recovery
Now flash again…after done SUCESSFULL.., flash Fix led, gapps, patch multilang.. done and reboot system.
-NJOY!
Video Review : Youtube
For ScreenShots head over to this page
Download :
* ROM
* Fix LED
* Multilanguage Patch and Smoothness
* GAPPS
CREDIT: ASUS ZenUI team & Sandeep Sethi
Thanks for the Rom, buddy.
I'm not able to get into the home screen as the setup is asking to login with google account. Is there any way to bypass it ?
Thank you
srinisan68 said:
Thanks for the Rom, buddy.
I'm not able to get into the home screen as the setup is asking to login with google account. Is there any way to bypass it ?
Thank you
Click to expand...
Click to collapse
you have to login my friend android security ._.
If dont want to login remove setupwizard folder from twrp filemanager
in system partition
Got it mate.
Thanks
Does voLTE work in this rom?
This rom is super stable. Only one thing that I noticed is it lags a bit. Basically there is a response time delay after the touch screen is pressed.
shantanu223 said:
This rom is super stable. Only one thing that I noticed is it lags a bit. Basically there is a response time delay after the touch screen is pressed.
Click to expand...
Click to collapse
as it is ported
kishan366 said:
Does voLTE work in this rom?
Click to expand...
Click to collapse
NO
Hello! This ROM is also compatible with the model "k50-a40" or "K50-T3s" ?!
Thank you very much for the support
pickandrew said:
Hello! This ROM is also compatible with the model "k50-a40" or "K50-T3s" ?!
Thank you very much for the support
Click to expand...
Click to collapse
it is compatible with all K50-XX Just remember to flash your compatible baseband after restoring/flashing the rom
have some picture？
Hey dude will you please port the same rom for oneplus 3
kris12344 said:
Hey dude will you please port the same rom for oneplus 3
Click to expand...
Click to collapse
oneplus 3 is not mediatek but can be ported from different zenfone with snapdragon chipset
but
i cant do the port i dont own oneplus 3
No 4G on both sims? ? If there is a way to enable it pls help me
Sent from my ASUS_X008D using Tapatalk
siri21 said:
No 4G on both sims? If there is a way to enable it pls help me
Sent from my ASUS_X008D using Tapatalk
Click to expand...
Click to collapse
No bro it is not in the hands of mine
ASUS is the one who makes ZenUI
sandeep.sethi said:
No bro it is not in the hands of mine
ASUS is the one who makes ZenUI
Click to expand...
Click to collapse
Hello Sandeep bro. Not going to ask about 4g on dual sim anymore and I already migrated to your StarOS rom. The thing now is that I can't seem to activate soft key navbar on that rom although I edited the build.prop to "qemu.hw.mainkeys=0". Why I don't use hardware keys? Cause it can't seem to detect touch a long time ago for me. Is there any workaround for this problem.
I'm sorry if my question is out of the topic but I'm afraid that you wouldn't answer my question on needrom as you said not going to post any rom there anymore. I'm a fan of your works [emoji22]
siri21 said:
Hello Sandeep bro. Not going to ask about 4g on dual sim anymore and I already migrated to your StarOS rom. The thing now is that I can't seem to activate soft key navbar on that rom although I edited the build.prop to "qemu.hw.mainkeys=0". Why I don't use hardware keys? Cause it can't seem to detect touch a long time ago for me. Is there any workaround for this problem.
I'm sorry if my question is out of the topic but I'm afraid that you wouldn't answer my question on needrom as you said not going to post any rom there anymore. I'm a fan of your works [emoji22]
Click to expand...
Click to collapse
after doing that edit in build.prop try wiping dalvik cache
if same then only way is to use navbar apps
sandeep.sethi said:
after doing that edit in build.prop try wiping dalvik cache
if same then only way is to use navbar apps
Click to expand...
Click to collapse
Surprisingly, I got into bootloop after wiping dalvik.
Fresh install the rom again. Going straight to editing build.prop and wiping dalvik give no results. Frustrating and this is the first time build.prop editing didnt worked for me.
Guess I'm going back to rom hunting while waiting for your aicp 12.1 bug fixes. Pls post more rom on needrom especially ported roms (I like them). Dont give a damn about what people says. You got many fans. Sorry cant give any donations as Im just 17 (not working yet) [emoji1]
siri21 said:
Surprisingly, I got into bootloop after wiping dalvik.
Fresh install the rom again. Going straight to editing build.prop and wiping dalvik give no results. Frustrating and this is the first time build.prop editing didnt worked for me.
Guess I'm going back to rom hunting while waiting for your aicp 12.1 bug fixes. Pls post more rom on needrom especially ported roms (I like them). Dont give a damn about what people says. You got many fans. Sorry cant give any donations as Im just 17 (not working yet) [emoji1]
Click to expand...
Click to collapse
sorry bro i cant do any work on aicp or nougat roms anymore
i dont have money to rent a server
My phone is Lenovo K3 Note k50-a40.
When I Insert two 2G (GSM 900, GSM 1800) sim cards everything is OK.
But when I remove one of them, I have no antenna => It means this ROM doesn't work with one sim card.
Hello you all developers how are you.
Recently I was using Oppo F1S That device had a battery daring problem I sold that out.Now I am using Redmi Note 4.
But I found ColorOS 3.0 is aowsome look like iOS so I request you to best developers in the world to port ColorOS 3.0 for RN 4.
Ahhm someone already using this check it out.
But we need world's best developers checked OS.
It is in Chinese I can't get what is it
Check it out
Web:::
http://www.miui.com/forum.php?mod=v...ilter=typeid&typeid=5935&typeid=5935&mobile=2
Abubakar Wander said:
Hello you all developers how are you.
Recently I was using Oppo F1S That device had a battery daring problem I sold that out.Now I am using Redmi Note 4.
But I found ColorOS 3.0 is aowsome look like iOS so I request you to best developers in the world to port ColorOS 3.0 for RN 4.
Ahhm someone already using this check it out.
But we need world's best developers checked OS.
It is in Chinese I can't get what is it
Check it out
Web:::
http://www.miui.com/forum.php?mod=v...ilter=typeid&typeid=5935&typeid=5935&mobile=2
Click to expand...
Click to collapse
Lol.... What a post...??
---------- Post added at 07:57 PM ---------- Previous post was at 07:49 PM ----------
Here u go. Website translated in English...
https://translate.googleusercontent...bile=2&usg=ALkJrhjIi8G2SUvWNPxtHzbDD0QRyL25rA
Can someone mirror it to google driver or something?
If that's the same zip, which has been released on xda (Thread closed for now), do not install it as ColorOS Installation makes some of sensors to fail. So, better stick to Miui or flash a custom Rom or whatever you want, but do not install colorOS.
This ROM is for (mido), your mobile phone is MediaTek or Qualcomm 625? If you are MediaTek you can not install this ROM!
I am from MIUI China Forum
i download and install but stuck on Oppo boot logo i have 4GB Mido version any onle please help or any developer please make it
or all.
here is mirror link https://www.mediafire.com/?ejqhwc5njgaa2ai
For me sensor is working no issue at all
You need to format data after install the rom to not make your phone bootloop
Tested on my phone mido 3 gb
akino553 said:
For me sensor is working no issue at all
You need to format data after install the rom to not make your phone bootloop
Tested on my phone mido 3 gb
Click to expand...
Click to collapse
working only 3gb version my friend have it its working on his mobile but not my
i install properly
anyone try on 4GB version
rashmi0733 said:
working only 3gb version my friend have it its working on his mobile but not my
i install properly
anyone try on 4GB version
Click to expand...
Click to collapse
had a quick testing... everything is working no major bugs...
some highlights-
RIL
VoLTE
Google apps supported(u just need to install google play services one time)
camera is awesome
great battery backup
very less bloatware (can b removed easily)
hope it helped
plz give a thumps up if helpful....
No volte ?
how to get Google play services?
Otherwise no problem.
Anybody has any solutions?
drmuruga said:
how to get Google play services?
Click to expand...
Click to collapse
Download and install OpenGAPPs "pico". Make sure you download the installer for the correct Android version.
nicks.1106 said:
had a quick testing... everything is working no major bugs...
some highlights-
RIL
VoLTE
Google apps supported(u just need to install google play services one time)
camera is awesome
great battery backup
very less bloatware (can b removed easily)
hope it helped
plz give a thumps up if helpful....
Click to expand...
Click to collapse
Plz help give download link I will downloaded from MediaFire it's stucks on opposite boot logo
I can flash color os as secondary in multirom, everything work well, but volte didn't work.
drmuruga said:
I can flash color os as secondary in multirom, everything work well, but volte didn't work.
Click to expand...
Click to collapse
U have to activate volte in setting->call
drmuruga said:
No volte ?
how to get Google play services?
Otherwise no problem.
Anybody has any solutions?
Click to expand...
Click to collapse
Volte is there buddy...u just need to activate it...
And install Google play services apk file...that's it
Sahil132 said:
Plz help give download link I will downloaded from MediaFire it's stucks on opposite boot logo
Click to expand...
Click to collapse
Follow these steps to successfully flash the ROM...
nicks.1106 said:
U have to activate volte in setting->call
Click to expand...
Click to collapse
Thanks a lot.
---------- Post added at 08:14 PM ---------- Previous post was at 08:14 PM ----------
nicks.1106 said:
Volte is there buddy...u just need to activate it...
And install Google play services apk file...that's it
Click to expand...
Click to collapse
Thanks a lot.
Installation Step By ""nicks.1106""
1.wipe everything (system, cache,data)
2.flash cm13 firmware
3.flash cm13( do not boot)
4.flash color os
5.(optional) if u r facing sensor bugs then flash the sensor fix zip...
6.thats it
Note:- i formated my data(intern memory) before so that I can remove password on booting... sometimes this causes bootloop...
So if u have this password on boot, then better backup ur important stuff and format ur internal memory...
Link Sensor Fix https://www.mediafire.com/?7uyfg885efc7h25
wow! color os without google is very nice experience. i can use facebook, whatsup ,chrome etc also. any possibility to register in oppo ?
flash miui 8.2 firmware, flash color os as secondary in multirom (quark os is primary) ,reboot,im not format data( but first time when i flash as primary ,formatted data also ).No google services. Backup account is only needed.
Do i really have to install cm13 first? Im aware of failing sensors but i just wanna try it out