ZenUI 3.0 for Lenovo K3 Note - K3 Note Android Development

ROM ZenUI 3.0- ported from Asus Pegasus 3 Asus X008D
By DEV: Sandeep Sethi (adeveloper79)
https://www.facebook.com/adev79
———-ABOUT ROM———
-Rooted
-Multilang
-Asus Apps
-Asus PixelMaster Camera
-Asus Moblie Manager
-And More…..
BUG: dt2w for Double tap 2 wake use my new kernel Renice V4
*Note*: After Reboot Settings FC, Calendar FC (Click OK)
Calendar u can uninstall*
————-Instalation————
1. go to twrp recovery
2. WIPE> wipe (cache,dalvik,system and data), factory reset
3. INSTALL>install: open folder where u downloaded
Choose ZenUI.zip and click flash (install) *if failed click WIPE (dalvik and cache) go back choose REBOOT> reboot to recovery
Now flash again…after done SUCESSFULL.., flash Fix led, gapps, patch multilang.. done and reboot system.
-NJOY!
Video Review : Youtube
For ScreenShots head over to this page
Download :
* ROM
* Fix LED
* Multilanguage Patch and Smoothness
* GAPPS
CREDIT: ASUS ZenUI team & Sandeep Sethi

Thanks for the Rom, buddy.
I'm not able to get into the home screen as the setup is asking to login with google account. Is there any way to bypass it ?
Thank you

srinisan68 said:
Thanks for the Rom, buddy.
I'm not able to get into the home screen as the setup is asking to login with google account. Is there any way to bypass it ?
Thank you
Click to expand...
Click to collapse
you have to login my friend android security ._.
If dont want to login remove setupwizard folder from twrp filemanager
in system partition

Got it mate.
Thanks

Does voLTE work in this rom?

This rom is super stable. Only one thing that I noticed is it lags a bit. Basically there is a response time delay after the touch screen is pressed.

shantanu223 said:
This rom is super stable. Only one thing that I noticed is it lags a bit. Basically there is a response time delay after the touch screen is pressed.
Click to expand...
Click to collapse
as it is ported

kishan366 said:
Does voLTE work in this rom?
Click to expand...
Click to collapse
NO

Hello! This ROM is also compatible with the model "k50-a40" or "K50-T3s" ?!
Thank you very much for the support

pickandrew said:
Hello! This ROM is also compatible with the model "k50-a40" or "K50-T3s" ?!
Thank you very much for the support
Click to expand...
Click to collapse
it is compatible with all K50-XX Just remember to flash your compatible baseband after restoring/flashing the rom

have some picture?

Hey dude will you please port the same rom for oneplus 3

kris12344 said:
Hey dude will you please port the same rom for oneplus 3
Click to expand...
Click to collapse
oneplus 3 is not mediatek but can be ported from different zenfone with snapdragon chipset
but
i cant do the port i dont own oneplus 3

No 4G on both sims? ? If there is a way to enable it pls help me
Sent from my ASUS_X008D using Tapatalk

siri21 said:
No 4G on both sims? If there is a way to enable it pls help me
Sent from my ASUS_X008D using Tapatalk
Click to expand...
Click to collapse
No bro it is not in the hands of mine
ASUS is the one who makes ZenUI

sandeep.sethi said:
No bro it is not in the hands of mine
ASUS is the one who makes ZenUI
Click to expand...
Click to collapse
Hello Sandeep bro. Not going to ask about 4g on dual sim anymore and I already migrated to your StarOS rom. The thing now is that I can't seem to activate soft key navbar on that rom although I edited the build.prop to "qemu.hw.mainkeys=0". Why I don't use hardware keys? Cause it can't seem to detect touch a long time ago for me. Is there any workaround for this problem.
I'm sorry if my question is out of the topic but I'm afraid that you wouldn't answer my question on needrom as you said not going to post any rom there anymore. I'm a fan of your works [emoji22]

siri21 said:
Hello Sandeep bro. Not going to ask about 4g on dual sim anymore and I already migrated to your StarOS rom. The thing now is that I can't seem to activate soft key navbar on that rom although I edited the build.prop to "qemu.hw.mainkeys=0". Why I don't use hardware keys? Cause it can't seem to detect touch a long time ago for me. Is there any workaround for this problem.
I'm sorry if my question is out of the topic but I'm afraid that you wouldn't answer my question on needrom as you said not going to post any rom there anymore. I'm a fan of your works [emoji22]
Click to expand...
Click to collapse
after doing that edit in build.prop try wiping dalvik cache
if same then only way is to use navbar apps

sandeep.sethi said:
after doing that edit in build.prop try wiping dalvik cache
if same then only way is to use navbar apps
Click to expand...
Click to collapse
Surprisingly, I got into bootloop after wiping dalvik.
Fresh install the rom again. Going straight to editing build.prop and wiping dalvik give no results. Frustrating and this is the first time build.prop editing didnt worked for me.
Guess I'm going back to rom hunting while waiting for your aicp 12.1 bug fixes. Pls post more rom on needrom especially ported roms (I like them). Dont give a damn about what people says. You got many fans. Sorry cant give any donations as Im just 17 (not working yet) [emoji1]

siri21 said:
Surprisingly, I got into bootloop after wiping dalvik.
Fresh install the rom again. Going straight to editing build.prop and wiping dalvik give no results. Frustrating and this is the first time build.prop editing didnt worked for me.
Guess I'm going back to rom hunting while waiting for your aicp 12.1 bug fixes. Pls post more rom on needrom especially ported roms (I like them). Dont give a damn about what people says. You got many fans. Sorry cant give any donations as Im just 17 (not working yet) [emoji1]
Click to expand...
Click to collapse
sorry bro i cant do any work on aicp or nougat roms anymore
i dont have money to rent a server

My phone is Lenovo K3 Note k50-a40.
When I Insert two 2G (GSM 900, GSM 1800) sim cards everything is OK.
But when I remove one of them, I have no antenna => It means this ROM doesn't work with one sim card.

Related

[ROM]cm 12 20141204 build cancro unofficial

Note: Whoever is able to boot into the rom without system ui fc pls post
1. The ROM which u were running before
2. CWM recovery version/link to that.
3. And step wise info of flashing.
4. And if installed gapps then link to that
This can help other users. Thanx
While everyone was searching for an ANDROID L AOSP by Ivan I found this on miui forum.
A bootable CM12 .
The screenshots i have posted.
The bug we are facing in this is unlimited system ui fc's. But the rom is booting and some what working too. if we can give our contribution we might have everything working.
Found from:
http://www.miui.com/thread-2152863-1-1.html
Credits also to him.
download link:
https://www.androidfilehost.com/?fid=95832962473396938
PS I know there are many posts on this but people might not know about this release so creating a new one
And yeah this isn't my work
yes tried it too same FCs problem. hope the guy who made that could say few words about it!
Did you try flash gapps for android 5.0 ?
hiphopboy said:
Did you try flash gapps for android 5.0 ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=57254997&postcount=77
I mean flash cm gapps ! He flash gapps mini i think from another source
i tried with normal gapps found here in the forum, not cm gapps. do you have a link for the cm gapps? so I may try with them too when I have got some spare time
I think here : http://www.naldotech.com/download-and-install-gapps-for-android-5-0-lollipop/
But is it really gapps related issue ?
Archmag3 said:
But is it really gapps related issue ?
Click to expand...
Click to collapse
don't think so, because even without flashing gapps, you continuosly get the system UI FCs since first boot
Testing
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
moly82 said:
don't think so, because even without flashing gapps, you continuosly get the system UI FCs since first boot
Click to expand...
Click to collapse
seems more like framework related issue...expert opinion needed. btw is someone keeping check on that thread in miui forum ?
gau20 said:
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
Click to expand...
Click to collapse
did the same, didn't work here.
just curious, maybe a language problem? Actually here it automatically selected Italian language during wizard. What language are you using?
Most of us are not even successful in making up with the fcs. But still happy about the fact that there is some progress in the development. But we all must be eagerly waiting for Ivan's lollipop
moly82 said:
did the same, didn't work here.
just curious, maybe a language problem? Actually here it automatically selected Italian language during wizard. What language are you using?
Click to expand...
Click to collapse
I just flashed the rom, wiped data and rebooted
no setup wizard direct home screen without any force close.
maybe try flashing these gapps.... http://fitsnugly.euroskank.com/dl.php?file=banks/gapps/gapps-L-minimal-signed-11-23-14.zip
Does someone know if the dev published the device tree used to compile the rom?
I guess he used github.com/keyur2maru/android_device_xiaomi_cancro since it's his and seems updated to L.
gau20 said:
I just flashed the rom, wiped data and rebooted
no setup wizard direct home screen without any force close.
maybe try flashing these gapps.... http://fitsnugly.euroskank.com/dl.php?file=banks/gapps/gapps-L-minimal-signed-11-23-14.zip
Click to expand...
Click to collapse
getting the FCs even without the gapps, so it is not a gapps problem for me. what language are you on after flashing the rom and correctly getting to the homescreen?
NisseCool said:
I guess he used github.com/keyur2maru/android_device_xiaomi_cancro since it's his and seems updated to L.
Click to expand...
Click to collapse
Yes you are right. This is what i also came to know.
gau20 said:
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
Click to expand...
Click to collapse
What was your;
CWM version and link?
ROM before flash?
And any settings related to how your phone boots?
Thanks.
PS: Going to try flashing it, just going to make a backup real fast.
gau20 said:
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
Click to expand...
Click to collapse
Did you install gapps?

OnePlus Two OXYGEN OS for Grand2

Dear bros/siss, I am an old member of this forum but never happen to me to write any thread. I do read about threads but i am not that genius like our devs, but since i have strong desire about my phone's appearance, i would like to tell you two thins:-\
1) I want oxygen os of one plus two phone which should work without any problem and steps for noobs are very very clearer. Also,it should work on any platform version like 4.3, 4.4 etc.
2) An official/unofficial CM 12 with zero (0) bugs.
We, all users of Grand2 have invested approx rs18,000 to rs21,000 to buy. But nowadays, every mobile phone, costs around 10000-15000 has got CM and many more, but still we are fighting for CM for these continuously 1.5 years. Please i request you guys to raise a positive voice to our DEVs to make these OS as we are awaiting for too much. Kindly share this thread.
Your loving friend/bro.
Thanks.
Hi sorry this is not the right place to ask for roms or things there is a separate section for questions and answers I came here for fora one plus 2 rom you may mislead many people like this so kindly ask things in the questions and answers sections thank you @VECTUS kindly remove this thread or move It as It may mislead at people thank you
here
1> On the TWRP recovery installed on your device, Download the OxygenOS ROM zip file and save it on your desktop.
2> Now extract the folder on your desktop and you will see two different files in the folder. Oxygen_1.0.0_Flashabdle.mdf and Oxygen_1.0.0_Flashabdle.zip. You need a zip file.
3> Step 2. After this connect you phone to the PC and Move the Oxygen_1.0.0_Flashabdle.zip file on your phone.
4> After this turn off your phone and boot in recovery mode. TO do this Hold Volume down button + Power button.
5> Now you phone will boot in recovery mode.
6> Now after this select Wipe option and and delete Cache, Dalvik cache and data.
7> Now go back and Select Install option and ‘choose zip from sd card’ from the Options.
8> Select the OXygenOS zip file and confirm the installation on next screen.
9> After the flash succeeds, you can reboot the device.
10> Enjoy.
So does the rom work? And were is the link to download the flashable zip?
its for oneplus one phone only and i want to know about our phones. so i wrote here coz may be any DEV can help us... link i missed but can be searched o google.
You are 100% right
Maybe its not the right place to ask but the important thing is that devs should read this
I`ll tell you something my friend ... we have few devs and almost of them not so talented ... they could import easy roms (like gennext ) but they cant build roms without bugs so dont expect too much ...
The truth sometimes hurt ... but we still love our devs and support them
sent from my g7102 CM12.1 5.1.1 r8 using tapatalk
I found the link
shahfaishal said:
here
1> On the TWRP recovery installed on your device, Download the OxygenOS ROM zip file and save it on your desktop.
2> Now extract the folder on your desktop and you will see two different files in the folder. Oxygen_1.0.0_Flashabdle.mdf and Oxygen_1.0.0_Flashabdle.zip. You need a zip file.
3> Step 2. After this connect you phone to the PC and Move the Oxygen_1.0.0_Flashabdle.zip file on your phone.
4> After this turn off your phone and boot in recovery mode. TO do this Hold Volume down button + Power button.
5> Now you phone will boot in recovery mode.
6> Now after this select Wipe option and and delete Cache, Dalvik cache and data.
7> Now go back and Select Install option and ‘choose zip from sd card’ from the Options.
8> Select the OXygenOS zip file and confirm the installation on next screen.
9> After the flash succeeds, you can reboot the device.
10> Enjoy.
Click to expand...
Click to collapse
will it work?
Sagar_1401 said:
will it work?
Click to expand...
Click to collapse
No, don't believe him! It can brick your device becuause one plus 2 hardware is far away from our grand two! If u don't believe me you can try and receive a boot loop phone!
Click like if i helped!
G.NO_BOYz said:
No, don't believe him! It can brick your device becuause one plus 2 hardware is far away from our grand two! If u don't believe me you can try and receive a boot loop phone!
Click like if i helped!
Click to expand...
Click to collapse
very well but what if my phone got brick how to unbrick it??
and also can u give me link for d twrp grand 2 not xda link direct download link ty
Sagar_1401 said:
very well but what if my phone got brick how to unbrick it??
and also can u give me link for d twrp grand 2 not xda link direct download link ty
Click to expand...
Click to collapse
https://basketbuild.com/filedl/devs?dev=aapav01&dl=aapav01/ms013g/TWRP/TWRP_ms013g.zip
This is a link to download twrp but u need to have cwm or any recovery to flash this recovery!
Click thank if i helped!
it
It is a stock rom of one plus
thanks bro im going to test if and if i got any problem be der for help
---------- Post added at 01:55 PM ---------- Previous post was at 01:43 PM ----------
shahfaishal said:
.
Click to expand...
Click to collapse
bro if der is no flashable md5 how will u flash it -_- u dont need to extract it just copy it in ur mobile
sorry but im a beginner but i have rights to say :/
Sagar_1401 said:
thanks bro im going to test if and if i got any problem be der for help
Click to expand...
Click to collapse
The one plus rom is not compatible with grand 2! So don't flash it, it will make you waste your time and why don't u flash blisspop rom that will be upoload stable rom soon?
G.NO_BOYz said:
The one plus rom is not compatible with grand 2! So don't flash it, it will make you waste your time and why don't u flash blisspop rom that will be upoload stable rom soon?
Click to expand...
Click to collapse
no i have cm 12.1
its better dan blisspop rom but i want oneplus two rom :crying: hope dev's make it
Sagar_1401 said:
no i have cm 12.1
its better dan blisspop rom but i want oneplus two rom :crying: hope dev's make it
Click to expand...
Click to collapse
Yes, but one plus two rom is not compatible and not development yet so u can't flash stock one plus 2 rom! And don't compare any rom! Hope u understand, developer are working hard to make one rom more steble so don't make him another work! If he finished project he will do another project! ?
Hi
Hey s*n of the bi***h
Your problem is easy to solved
BUY YOU A (ONE PLUS TWO PHONE)
and f**k yourself away
Have a good day
Hahah Correct Dom...
1st The Hardware differ's far apart in both devices...
2nd CWM or TWRP won't even start the zip installation(I suppose so)
3rd Even if it were to start, it will eventually fail giving you message about weird sh*t you don't know
4th You Dare to try it and fu*k your phone... You get a boom, The chips and Mother board are fu*cked up...
Oos not good
Sagar_1401 said:
no i have cm 12.1
its better dan blisspop rom but i want oneplus two rom :crying: hope dev's make it
Click to expand...
Click to collapse
I'm using a oneplus two and its a great device. But a major problem with it is that the stock ROM of the phone that is the OxygenOs is too buggy and so the oneplus users are moving to custom roms. So, I would recommend cm12.1..
In addition to this the features of oneplus devices and grand 2 is also very different so it will very difficult to port it.
So in short I can say stay with whatever you have right now. Its the best available at the moment.
Hit thanks If I helped!!
kishan12345 said:
I'm using a oneplus two and its a great device. But a major problem with it is that the stock ROM of the phone that is the OxygenOs is too buggy and so the oneplus users are moving to custom roms. So, I would recommend cm12.1..
In addition to this the features of oneplus devices and grand 2 is also very different so it will very difficult to port it.
So in short I can say stay with whatever you have right now. Its the best available at the moment.
Hit thanks If I helped!!
Click to expand...
Click to collapse
I guess now 1+2 o2 mod has got some updates and buggs and laggs are been fixed isnt it?
Sagar_1401 said:
I guess now 1+2 o2 mod has got some updates and buggs and laggs are been fixed isnt it?
Click to expand...
Click to collapse
Yes the updates have fixed some bugs but still it's buggy for me and some others. And if this ROM is ported to other device then it will be a house of bugs.

[ROM][6.0.1r66][SM-T325] UNOFFICIAL Resurrection Remix v5.7.4 (24 SEPTEMBER 2016)

Hi Guys,
Made a Port Firmware [SM-T320] UNOFFICIAL Resurrection Remix for SM-T325.
Link to ROM v5.7.4: https://yadi.sk/d/pK5KobhEvubjq
Link to RRemixMod: https://yadi.sk/d/7D9tnSJe3AKA9j
Link to Gapps: https://yadi.sk/d/WJR5i3Qjr3Mje
Link to original: http://forum.xda-developers.com/galaxy-tab-pro-12-10-8/development/rom-unofficial-resurrection-remix-v5-7-t3411635
Thanks for separating the two devices... And best of luck on your development efforts!
Installed on mine: fantastic rom.Way better in performance and battery than cm13. No bugs so far
sent, me thinks
i appear to have a problem with contacts clear cache dalvik and data and flashed this rom and contacts on startup keeps getting errors ?
update :
its the gapps fault lol i downloaded a mini version and it seems fine now ) pico version seems to have a problem )
thnx for this rom bro
New version (5.7.3) uploaded.
See first post for download link
From mid-June after a kernel upgrade in SM13 stopped working USB-modem. This core of June 16, the modem works.
Kernel with support for the USB-modem (for TWRP):
Hi @promeo123, thanks for this great work of yours, I'm going to install this in my device sm t325, but I have question, do I need to flash also this kernel you posted above ^^^ ?
jga_143 said:
Hi @promeo123, thanks for this great work of yours, I'm going to install this in my device sm t325, but I have question, do I need to flash also this kernel you posted above ^^^ ?
Click to expand...
Click to collapse
If not using usb-modem, it is not necessary.
Hello!
I'm currently using CM12.1 ROM by crpalmer, if I want to install this ROM, will there be any bugs?
Thanks
justmoto92 said:
Hello!
I'm currently using CM12.1 ROM by crpalmer, if I want to install this ROM, will there be any bugs?
Thanks
Click to expand...
Click to collapse
Be sure to do wipe data, system, cache. Then the error will not happen.
Its been 2 weeks already after performing a clean install on my device, great experience with this rom. No lags, no bugs, super fast, with super long battery life! My question is how to take screenshot?
jga_143 said:
Its been 2 weeks already after performing a clean install on my device, great experience with this rom. No lags, no bugs, super fast, with super long battery life! My question is how to take screenshot?
Click to expand...
Click to collapse
Put a quick tile
sent, me thinks
Cissiboy said:
Put a quick tile
sent, me thinks
Click to expand...
Click to collapse
Thanks, I just found out that you can also enable hand gesture to take screenshot
New version (5.7.4) uploaded.
See first post for download link
Has anyone had any problems installing this? My device gets stuck on the welcome screen every time, I've tried the 5.7.4 and the 5.7.3 versions, with and without gapps. I wipe the device, dalvik and cache, flash the rom, and after rebooting the welcome screen where you pick a language shows up. I select a language, press the next button, connect to my wifi, and then it goes back to the welcome screen again and nothing more happens. Am I missing something?
Thank you for this great ROM!
For a long time I had a 5.1.1 ROM on it (Temasek) and thought that it's just the hardware of the tablet which doesn't allow for more battery life and more standby time. I used the tablet mostly as a kitchen radio because, with Viper4Android, the speakers are very loud and clear, ideal for spoken broadcasts.
Now, with this ROM, this has changed. The device is indeed resurrected! Especially the standby time is great now! The additions like Live Display are also welcome.
Roq4rt said:
Am I missing something?
Click to expand...
Click to collapse
Don't know if I understood you correctly. You flashed the gapps directly after flashing the ROM without letting it reboot, didn't you?
Think I had the same issue with this ROM on another device.
For being on the save side, I've wiped after flashing the ROM as well and then it worked.
Modified firmware ResurrectionRemix-M-v5.7.4-20160924-mondrianlte.
See first post for download link: https://forum.xda-developers.com/galaxy-tab-pro-12-10-8/development/rom-unofficial-resurrection-remix-v5-7-t3422525
1. Altered settings menu (cleaned and altered some points).
2. Remove some applications, as well as delete the themes.
3. Changed Trebuchet Launcher on Novalauncher.
4. magnify the screen
5. Embed the core of the latest firmware SlimRom6 (20170118)
thanks a lot for the work!
I'm a bit confused though, which link is for T325 rom? the 1st or the 2nd.... thanks!
Hi, are you going to bring an Android 7 version for the 325?

MIUI 6.9.29 Marshmallow [CM 13 Based][17-12-2016]

So This is first Miui Dev Rom based on Marshmallow...
All Thanks to original DEV THOR TIGER.... and Kuma sir for cm13
In latest Build google keyboard added. And now No more chinese apps
Whats Working..
1. Ril
2. wifi
3. camera
4. Bluetooth
5. LTE and VoLTE
6. LED
7.GPS(not tried)
8.Sensors
9. Audio
10. Video recording
11. Camera
Whats not working
1. network signal not showing. But Some Users are getting Sim Loaded.
2. Video calling on VoLte
3. Swapping Data sim card gives reboot. And then it gets bootloop. Then go to recovery and just dirty flash the MIUI MM 2 rom zip again and it will get fine.
you tell more
DOWNLOADS
MIUI Marshmallow THIRD
MINIMAL A-Gapps
How to flash
1. Download Miui_MM_3_Redmi2.zip and a-gapps package.
2. Reboot to twrp recovery
3. make backup of current rom
4. Now wipe data, cache, system and dalvik cache
5. now flash Miui_MM_3_Redmi2.zip and a-gapps
6. when flashing completes reboot to system
7. wait till rom boots, and it will take some time to load miui 8 setup.
Note. It shows no sim card...but dont worry it is fine. Sims are loaded properly ...
for Volte and data you need to set APN in setting.
Note2- Only for porters. If anyone is trying porting and editing chinese rom...and you want to delete chinese apps...you only need to delete superSU zip in rom. Chinese devs are containing their chinese app in SuperSu zip.
SOURCES
1. Kernel Source--https://github.com/CyanogenMod/android_kernel_wingtech_msm8916 (BlackHawk Kernel)
2. Vendors--https://github.com/TheMuppets/proprietary_vendor_wingtech
Credits:
@ketut.kumajaya, Thor Tiger, Me
If someone is missed...just tell me i will add.:fingers-crossed....:fingers-crossed:
Congratulations to your work. Is it supporting multiwindow like cm13
Wow miui skin in cm thanks to your innovative idea
Thread Updated with Download link......
Keyboard Not Showing
Keyboard is not working/showing on First Setup. Im using Spanish. Thanks in advance.
ShainaGlowy said:
Keyboard is not working/showing on First Setup. Im using Spanish. Thanks in advance.
Click to expand...
Click to collapse
oh srry i forgot to mention....keyboard is removed because it was chinese and i didnt added any other keyboard to reduce rom size....
you can skip skip setup...and then install any keyboard apk from backup and then enable it ....
it will work fine...
thank you for reminding me....
saurabh1234 said:
oh srry i forgot to mention....keyboard is removed because it was chinese and i didnt added any other keyboard to reduce rom size....
you can skip skip setup...and then install any keyboard apk from backup and then enable it ....
it will work fine...
thank you for reminding me....
Click to expand...
Click to collapse
I cant skip setup because in my previous miui rom i was signed in....so it asks me to type in my password stating this device was signed in using an account.
Im in love with this rom it was kind of my dream...please help
aishik2015 said:
I cant skip setup because in my previous miui rom i was signed in....so it asks me to type in my password stating this device was signed in using an account.
Im in love with this rom it was kind of my dream...please help
Click to expand...
Click to collapse
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
saurabh1234 said:
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
Click to expand...
Click to collapse
Thank you for your fast response sir.
I will try it.
You might want to add this to the notes too for other people who might have the same problem
saurabh1234 said:
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
Click to expand...
Click to collapse
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
aishik2015 said:
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
Click to expand...
Click to collapse
ok...i will do something...
now i am travelling...
till then can you try one thing...
restore your old miui backup and turn off find device...
use that miui for 10-30 min with data ON
then flash this rom...
and then check is it saying same...
aishik2015 said:
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
Click to expand...
Click to collapse
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
based on kuma kernel or jerrica ?
saurabh1234 said:
ok...i will do something...
now i am travelling...
till then can you try one thing...
restore your old miui backup and turn off find device...
use that miui for 10-30 min with data ON
then flash this rom...
and then check is it saying same...
Click to expand...
Click to collapse
Will I dirty flash this ROM or after wiping ?
---------- Post added at 10:37 AM ---------- Previous post was at 10:36 AM ----------
saurabh1234 said:
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
Click to expand...
Click to collapse
I tried this in the beginning it didn't work
saurabh1234 said:
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
Click to expand...
Click to collapse
Do something please.
aishik2015 said:
Do something please.
Click to expand...
Click to collapse
i m on vacation..u need to wait for 10-15 days
zieruchan said:
based on kuma kernel or jerrica ?
Click to expand...
Click to collapse
kuma
ROM Looks great. But have some doubt
1) is this based on lollipop firmware?
2) does this make worse experience in 1gb ram phone? Like miui LP ROM.
I hope that network indication is fixed soon...thx
@saurabh1234 I wanna know a few thing before going to see it in action.
1. Is original MIUI framework is included in this ROM? Means will it support MIUI themes?
2. What is the structure of the zip? Does it contain separate data and system image along with all the loaders like MIUI or just the system.img like most other CM ROMs?
3. What about OTA and update stuff?
iamsubhranil said:
@saurabh1234 I wanna know a few thing before going to see it in action.
1. Is original MIUI framework is included in this ROM? Means will it support MIUI themes?
2. What is the structure of the zip? Does it contain separate data and system image along with all the loaders like MIUI or just the system.img like most other CM ROMs?
3. What about OTA and update stuff?
Click to expand...
Click to collapse
1. yes miui themes working... I tried only 2-5 themes...
2. It is a dirty port taking cm13 as base. So it is not containing data and system seperate images or .dat file...
It is having file system same as KK rom zip files.
3. Ota will not work.

ResurrectionRemixOS 6.0.1

Presenting Resurrection Remix for Note 5.
WARNING: I'M NOT RESPONSIBLE FOR WHAT YOU DO TO YOUR DEVICE THE CHILD YOUR MOTHER GAVE BIRTH TO IS, AKA YOU
INTENDED ONLY FOR INTERNATIONAL MODELS C,I,G AND T
Source Code: Mod Edit: Link removed.
Telegram Group to keep updated
Mod Edit: Link removed.
Version 3 Download link: Mod Edit: Link removed.
How to install
READ THIS ALLL OF IT OR YOU WILL BRICK YOUR PHONE!
1)Wipe data system cache
2)flash this ROM!!!
3) install gapps recommended Dynamic Gapps, or pico open gapps
4)DELETE /system/lib/omx folder IN TWRP!!!!!
5)Reboot system!
6) Wait until the ROM boots NOW PAY ATTENTION!
7) REBOOT INTO RECOVERY AND FLASH A KERNEL FROM HERE: Mod Edit: Link removed. LOOK FOR IT!!
8)FLASH THE KERNEL AND LET THE ROM SIT FOR 2 minute's OR YOU WILL GET REBOOTS AND I WILL LAUGH AT YOU
9) Enjoy!!!!!
CHANGELOG:
V3
Blue screen is gone
Baseband issues are fixed IF YOU FOLLOW DIRECTIONS
Minor things you probably won't notice because you don't care
Post bugs you see or find
Removed S6e+
V2
Added T-Mobile and s6e+ support
V1
Initial release
Thanks to @LiL_Assassin, @muffinsmuffy, @Rainbow_Dash
And the whole MynogeN team for helping out even if they didn't want to THEY ARE THE REAL DEVS! EVEN YOU @UpInTheAir They are no cheap knock-offs and better than your 'recognized' devs
2nd reserve
Anyone tried yet can state the bugs ?
We who use the n910T congratulATE you.
we hope you can make one for us too
caniranges said:
We who use the n910T congratulATE you.
we hope you can make one for us too
Click to expand...
Click to collapse
There is already a build for Tmo just not made by me it is in the General section
Waleedaligomaa said:
Anyone tried yet can state the bugs ?
Click to expand...
Click to collapse
The more people who can test and provide logs the faster it'll progress through development. Hopefully soon
Good job thanks !
Link for t-mobile build?does this build also work with t-mobile variant???
215Aphillyated said:
Link for t-mobile build?does this build also work with t-mobile variant???
Click to expand...
Click to collapse
http://forum.xda-developers.com/note5/general/romtesting-t3380186
Atemtping to flash my build on Tmo, Dual sim, etc will make the ROM refuse to flash. This link is ONLY for Tmo
How do I install it?
help!!!
How do I install it? I install it without google apps, but restarting never turns on, it restarts.
I made a full wipe.
my model is N920G
diego1994 said:
help!!!
How do I install it? I install it without google apps, but restarting never turns on, it restarts.
I made a full wipe.
my model is N920G
Click to expand...
Click to collapse
If you wouldve read the OP it says to delete lib OMX files in TWRP located in /system
I edited the OP to seem more obvious
Taylor_Swift_Fan said:
If you wouldve read the OP it says to delete lib OMX files in TWRP located in /system
I edited the OP to seem more obvious
Click to expand...
Click to collapse
Ok thank you ... I just noticed
diego1994 said:
Ok thank you ... I just noticed
Click to expand...
Click to collapse
All cool bro report the bugs u see man , one guy can't do it alone
I have a blue screen after booting. If i lock the screen with the powerbutton i can see the normal android lockscreen for half a second.
echma said:
I have a blue screen after booting. If i lock the screen with the powerbutton i can see the normal android lockscreen for half a second.
Click to expand...
Click to collapse
Phone model please
Taylor_Swift_Fan said:
Phone model please
Click to expand...
Click to collapse
Oh sorry forgot that... N920C
Well well...after installing rom...it continues to reboot itself nd when i try to delete that file it wont let me to delete lib/omx also!!!!
P.S: using n920g nd clean flash!
Arpit Aggarwal said:
Well well...after installing rom...it continues to reboot itself nd when i try to delete that file it wont let me to delete lib/omx also!!!!
P.S: using n920g nd clean flash!
Click to expand...
Click to collapse
Dual booting? If so then its in /data/multiboot/system/lib/OMX
Also try an delelte lib64 omx
echma said:
Oh sorry forgot that... N920C
Click to expand...
Click to collapse
I have a fix for your issue, everything is working properly so with the blue thing covering pull down the QS then in the top right corner tap there it should take you to settings, there enable developers settings(if you don't know google) there enable the option "show surface updates"
Remember this is beta

Categories

Resources