Related
Hello all I am paying for a wireless tethering plan yet the mobile hotspot seems to time out every 12 seconds. It will lode a web site usually half way before my data just drops to 0 kb/s and I have about 4 bars of lte. I don't know if there is a way to fix this, I have tried turning it on and off and rebooting but nothing seems to help this issue. When it stops responding to my computer the device name changes to a * and then it will not send data anymore. Any help would be much appreciated.
Thanks
I'm running into the same problem as well. I can tether through USB just fine but whenever I use the mobile hotspot my internet starts to timeout. I'll be lucky if I can go 5 minutes without it timing out.
Are either of you using Tasker? I had a very similar problem where I was using Tasker to determine when I was home by toggling Wifi to check for my home network and then setting sound profiles. I found that tasker would toggle the wifi which caused my wifi tether to stop working. It would look like it was on, but wouldn't send data. I fixed it by having tasker stop toggling wifi when running my wifi tether app..
Any smart action profiles set? Turn it off & see if it continues.
Sent from my DROID RAZR using xda premium
Mmh, I've got the EU RAZR (don't have to pay to route my connection where I want) and the Wireless Tethering is working flawlessly (HSPA+).
Maybe they haven't used the same software OR they've used the same software but there's a problem when LTE is ON.
Anyway, the EU RAZR is about to get an OTA...and VZW one should as well.
norm807 said:
Are either of you using Tasker? I had a very similar problem where I was using Tasker to determine when I was home by toggling Wifi to check for my home network and then setting sound profiles. I found that tasker would toggle the wifi which caused my wifi tether to stop working. It would look like it was on, but wouldn't send data. I fixed it by having tasker stop toggling wifi when running my wifi tether app..
Click to expand...
Click to collapse
I'm not using Tasker and I my Wifi is off the whole time. I have tried resetting my phone but I my connection still times out.
garywojdan81 said:
Any smart action profiles set? Turn it off & see if it continues.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Zero smart actions
kholk said:
Mmh, I've got the EU RAZR (don't have to pay to route my connection where I want) and the Wireless Tethering is working flawlessly (HSPA+).
Maybe they haven't used the same software OR they've used the same software but there's a problem when LTE is ON.
Anyway, the EU RAZR is about to get an OTA...and VZW one should as well.
Click to expand...
Click to collapse
You may be on to something here. I'm going to try to wifi tether on 3G to see what happens.
I'm finding tethering is better with 3g than 4g for some reason.
kholk said:
Mmh, I've got the EU RAZR (don't have to pay to route my connection where I want) and the Wireless Tethering is working flawlessly (HSPA+).
Maybe they haven't used the same software OR they've used the same software but there's a problem when LTE is ON.
Anyway, the EU RAZR is about to get an OTA...and VZW one should as well.
Click to expand...
Click to collapse
Setting the data connection to 3G didn't help. It took a little bit longer to time out this time but it still happened.
So I kind of figured out why I'm getting timed out, but I'm no closer to a solution.
When I tether through USB, 4G will stay connected. Nothing wrong with it.
When I tether through WiFI, I time out because the 4G connection drops after a few seconds and when 4G is re-established. The 4G connection does not have data, even though it says 4G. I cannot access data on my phone or on any tethered device.
When I turn off the mobile hotspot, then my 4G will drop again and when 4G is re-established, then data starts to work again.
edit:
Maybe I have a faulty phone. I'm going to try to exchange it this weekend.
Are you rooted?
facinater said:
Are you rooted?
Click to expand...
Click to collapse
Not rooted.
I have tried mobile hotspot after a full reset with the same results.
Same problem here in canada with rogers model unlocked and rooted jsing telus
Software bug because with others wifi tether program all work great ... i just wait an update
Sent from my XT910 using xda premium
under settings--->wireless--->mobile networks--->access point names do you ave any options?
i had 2 APN's and when i selected the tethering APN it seemed to work for me.
(rogers XT910)
I have similar problem connecting a Kindle Fire to a Verizon provisioned hotspot. Web browsing doesnt work but music, videos, apps, and books seem to work. I haven't had a chance to check but on the Thunderbolt we had a similar issue and it turned it to be bad dns server for the wifi connected devices.
I don't have the ability to set a custom DNS server on the Fire so I can't check this at the moment. I'll report back when I can verify if this is the issue with a laptop.
I have a EU razr and I also have problems with Wifi tether - my computer can connect fine but I get "limited connectivity" and no Internet access. Worked without issue on SE Arc with same provider and APN settings.
What other Hotspot apps are out there that hopefully work better?
Same issue.
From what I have been reading on other forums this is a known issue that Motorola is working on and the ETA for the fix is no more than two weeks. We'll see.
This seems to work
I tried the steps below and haven't had a drop in the last 15 minutes. I'm not a network guy so I don't know the reasoning behind why this worked for me, but so far so good. If you're not comfortable messing with the Registry, then don't try this. I used a spare PC to test it first.
Change the Default Maximum Transmission Unit (MTU) Size Settings
1. Click Start, click Run, type regedit in the Open box, and then click OK.
2. Locate and then click the following subkey in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NdisWan\Parameters
3. Add a Protocols subkey (if it does not already exist). To do so:
a. On the Edit menu, point to New, and then click Key.
b. Type Protocols, and then press ENTER.
4. Add a 0 (zero) subkey to the Protocols subkey. To do so:
a. Click the Protocols subkey that you created step 3.
b. On the Edit menu, point to New, and then click Key.
c. Type 0 (zero), and then press ENTER.
5. Click the 0 subkey that you created in step 4.
6. On the Edit menu, point to New, and then click DWORD Value.
7. In the Value data box, type ProtocolType, and then click OK.
8. On the Edit menu, click Modify.
9. In the Value data box, type 800, make sure Hexadecimal is selected under Base, and then click OK.
10. On the Edit menu, point to New, and then click DWORD Value.
11. Type PPPProtocolType, and then press ENTER.
12. On the Edit menu, click Modify.
13. In the Value data box, type 21, make sure Hexadecimal is selected under Base, and then click OK.
14. On the Edit menu, point to New, and then click DWORD Value.
15. Type ProtocolMTU, and then press ENTER.
16. On the Edit menu, click Modify.
17. Under Base, click Decimal, type the MTU size that you want in the Value data box, and then click OK. ( I used 1400)
18. Quit Registry Editor.
19. Restart your computer.
On the Razr: Open Mobile Hotspot Settings-> Configure Mobile Hotspot. At the bottom, change the Client (DHCP) start address to 172.168.20.10
ghirsh said:
From what I have been reading on other forums this is a known issue that Motorola is working on and the ETA for the fix is no more than two weeks. We'll see.
Click to expand...
Click to collapse
Been having similar problems. Downloaded the latest beta of Android wifi Tether from here http://code.google.com/p/android-wifi-tether/downloads/list and everything works now.
Golgo said:
I have a EU razr and I also have problems with Wifi tether - my computer can connect fine but I get "limited connectivity" and no Internet access. Worked without issue on SE Arc with same provider and APN settings.
What other Hotspot apps are out there that hopefully work better?
Click to expand...
Click to collapse
Any updates to this? Having the same problem and can't seem to make it work. Don't have a rooted RAZR so can't try the download link.
Hey! I used to have problems for a while with my tethering as well and ANY device I connected just wouldn't have access to the internet. I tried a lot of different apps, methods etc., to get it working and nothing seemed to work. But one day, I tried my own thing. I simply connected my device via wifi tethering (I don't use USB, but this should still work), and then, after it was connected, I simply opened my phones web browser to make sure I could access a data connection in the first place. And lo and behold, my tethering is working just fine!
So to put simply, what you should try is:
1) Connect your device via tethering (I used wifi, but usb should work too!).
2) Make sure you actually have a data connection! And then, open the web browser on your phone, and go to a web page (I just go to google )
3) Enjoy your tethering.
I hope this works for everyone, and not just me! XD
The last update from verizon fixed this issue.
Sent from my Kindle Fire using Tapatalk
I have a Samsung Galaxy S3 (Mini) with Jelly Bean 4.1.2. I recently bought iPad 4 (Wifi only) and decided to try to do some tethering with my phone. I entered the "Tethering and portable hotspots" submenu and paired up successfully with the iPad. However, I couldn't access the Internet with the iPad even though the connection to my S3 was okey. Everything just seemed to be loading and loading, and Chrome said something about DNS servers. I gave up and tried to Bluetooth-route. Again I was successful in connecting the two devices with the link symbol appearing in the upper left of the iPad's screen. Yet again the Internet did not work.
I should mention that I live in a country where there's no tethering regulation so I can just use the default tethering settings. I did think about if using Avast, power saving mode or anything other affected the tethering process, but after turning Avast and power saving mode off, nothing happened. I also double-checked that I could access Internet via my phone. I also double checked that I had my mobile data on.
There isn't any setting in S3's "Tethering and portable hotspots" submenu that I could try to change (I've tried tethering with and without a password). I can do something about hotspot Wifi-connection from the iPad (according to the manual):
Adjust the settings for connecting to a Wi-Fi network: Tap next to a network. You can set an HTTP proxy, define static network settings, turn on BootP, or renew the settings provided by a DHCP server.
Click to expand...
Click to collapse
However, I cannot do anything if I try to create a hotspot using Bluetooth.
I would appreciate help immensely!
On the tethering section, and since you only doing it for an ipad, go to configure the access point and tap advanced settings. Try changing the broadcast channels from auto to 10.
I work on a technical support desk and it seems that Ipads are very very fussy on lower channels, i am unable to test this as i don't own an Ipad but it may be worth a shot.
vengeance1990 said:
On the tethering section, and since you only doing it for an ipad, go to configure the access point and tap advanced settings. Try changing the broadcast channels from auto to 10.
I work on a technical support desk and it seems that Ipads are very very fussy on lower channels, i am unable to test this as i don't own an Ipad but it may be worth a shot.
Click to expand...
Click to collapse
Thank you for this suggestion. Unfortunately it did not work. I also tried channels 4 and 11 instead of Auto without success.
Tigerman82 said:
Thank you for this suggestion. Unfortunately it did not work. I also tried channels 4 and 11 instead of Auto without success.
Click to expand...
Click to collapse
I asked on my friends to test this he has an s3 and an ipad mini, he doesnt use the stock tether. But he said clockwork mod tether works perfectly well on his. I believe it is free from the play store. Perhaps give that a try.
Sorry I couldnt be more helpful
Sent from my GT-I9300 using xda app-developers app
I just wanted to let you guys know that I have solved the issue. The trick was to add my provider's internet information (server, port) to iPad's settings. This is weird as with my old phone, Samsung Bada, I just had to create a Wifi hotspot with a few clicks and that's it.
Tigerman82 said:
I just wanted to let you guys know that I have solved the issue. The trick was to add my provider's internet information (server, port) to iPad's settings. This is weird as with my old phone, Samsung Bada, I just had to create a Wifi hotspot with a few clicks and that's it.
Click to expand...
Click to collapse
Hi Tigerman82.
Could you please be more precise regrading the solution you found : What configuration did you make in you iPad, which information, in which configuration menu ?
Thank you for your help.
leinad said:
Hi Tigerman82.
Could you please be more precise regrading the solution you found : What configuration did you make in you iPad, which information, in which configuration menu ?
Thank you for your help.
Click to expand...
Click to collapse
I first created the Wifi hotspot connection between SG3Mini and the iPad. In SG3Mini, I entered Settings -> More Settings -> Mobile Networks -> Access Point Names (APNs) -> *chose my provider's Internet/Wap settings* -> wrote down Proxy, Port, (User Name, Password)
Then in iPad, I entered the Wifi-settings, Tapped the > next to the SG3Mini's Hotspot connection and added the APN info in the HTTP Proxy settings. I originally tried to use the User Name and Password but it didn't work so I just used Proxy and Port. Then I tapped the "Renew" option.
After this, I could tether without problems.
Tigerman82 said:
I first created the Wifi hotspot connection between SG3Mini and the iPad. In SG3Mini, I entered Settings -> More Settings -> Mobile Networks -> Access Point Names (APNs) -> *chose my provider's Internet/Wap settings* -> wrote down Proxy, Port, (User Name, Password)
Then in iPad, I entered the Wifi-settings, Tapped the > next to the SG3Mini's Hotspot connection and added the APN info in the HTTP Proxy settings. I originally tried to use the User Name and Password but it didn't work so I just used Proxy and Port. Then I tapped the "Renew" option.
After this, I could tether without problems.
Click to expand...
Click to collapse
Thanks. Will give it a try.
A little confused
vengeance1990 said:
I asked on my friends to test this he has an s3 and an ipad mini, he doesnt use the stock tether. But he said clockwork mod tether works perfectly well on his. I believe it is free from the play store. Perhaps give that a try.
Sorry I couldnt be more helpful
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How was he able to test clockwork mod tether with an ipad mini as this is a usb tether and my ipad mini doesn't have a usb port?
Hi,
I tried asking in the Cyanogenmod thread but no one got around to give me a hand. I'm really having a headache.
I have a XT910 (umts_spyder) with CM 10.1.2 and I can't find a way to make tethering work.
I've tried bluetooth, USB, Wifi tethering and even applications on the play store.
My laptop sees the wifi tethering access point but is either unable to connect or connects but has no internet.
Data connection on my phone works fine.
Please help
Well, I tried installing MIUI ICS on my stock ROM slot and the same problem happens.
Unless the same bug is present in both ROMs, i'm missing something...
fooraide said:
Hi,
I tried asking in the Cyanogenmod thread but no one got around to give me a hand. I'm really having a headache.
I have a XT910 (umts_spyder) with CM 10.1.2 and I can't find a way to make tethering work.
I've tried bluetooth, USB, Wifi tethering and even applications on the play store.
My laptop sees the wifi tethering access point but is either unable to connect or connects but has no internet.
Data connection on my phone works fine.
Please help
Click to expand...
Click to collapse
Just saw this in another forum...Was experiencing the same issue as you...This worked for me;
1. select Change Device-Profile
2. pick Generic ICS/JB (wlan0)
3. apply "Routing Fix"
buddhatown said:
Just saw this in another forum...Was experiencing the same issue as you...This worked for me;
1. select Change Device-Profile
2. pick Generic ICS/JB (wlan0)
3. apply "Routing Fix"
Click to expand...
Click to collapse
Thanks, Buddhatown. I've tried what you suggested, but no-go. Can you list the other settings that are enabled in the wifi tether app?
Thanks!
RFrisch said:
Thanks, Buddhatown. I've tried what you suggested, but no-go. Can you list the other settings that are enabled in the wifi tether app?
Thanks!
Click to expand...
Click to collapse
version 3.3-beta2-06102013***Synergized***
setup-method : auto
encryption off
wifi-driver reload checked
wifi-driver reload 2 checked
MSS clamping checked
Routing Fix checked
buddhatown said:
Just saw this in another forum...Was experiencing the same issue as you...This worked for me;
1. select Change Device-Profile
2. pick Generic ICS/JB (wlan0)
3. apply "Routing Fix"
Click to expand...
Click to collapse
Hi,
Where do you see these options ? I'm not sure where to go to "select Change Device-Profile" ?
Thanks !
fooraide said:
Hi,
Where do you see these options ? I'm not sure where to go to "select Change Device-Profile" ?
Thanks !
Click to expand...
Click to collapse
Okay, nevermind, I found it with the Wifi tether app.
However, when I try that, I can't even get the SSID to show up.. I tried both wlan0 and wlan1.
At least when I use the tethering from the settings, I see the SSID.
Any other ideas ?
fooraide said:
Okay, nevermind, I found it with the Wifi tether app.
However, when I try that, I can't even get the SSID to show up.. I tried both wlan0 and wlan1.
At least when I use the tethering from the settings, I see the SSID.
Any other ideas ?
Click to expand...
Click to collapse
sorry I don't have any other ideas. Strange that I had the same problem that works for me
buddhatown said:
sorry I don't have any other ideas. Strange that I had the same problem that works for me
Click to expand...
Click to collapse
Yay, got it to work. It seems the checkbox for the first driver reload is very important.
Thanks !
fooraide said:
Yay, got it to work. It seems the checkbox for the first driver reload is very important.
Thanks !
Click to expand...
Click to collapse
Nice. Glad you got it. I know I struggled for months with it.
Still no go for me
fooraide said:
Yay, got it to work. It seems the checkbox for the first driver reload is very important.
Thanks !
Click to expand...
Click to collapse
fooraid, do you mind sharing your full configuration? I have the same problem with my RAZR (running CM 10.1.3). If I use the built-in tethering I see the SSID, PC is able to connect but cannot get Internet connection, or if I use the wifi-tether-app, my PC does not even see the SSID.
I followed all the suggestions on this thread but to no avail.
Thanks.
Howdy all. I have a wifi at home which works with web authentication i.e. you connect your phone to wifi and on opening a browser, it redirects you to an authentication site wherein upon entering your username and password, you get connected. The authentication page requires you to keep the tab open and work with another tab, otherwise you lose the connection. When working on a PC, it works like a charm. I keep the tab open and wifi sticks for long even when you're not active. But on a smartphone (I have a Galaxy S3 here), it's a living hell trying to keep it stay connected. I've tried keeping the browser app resident in memory, created a tasker script to browse the URL and reconnect on certain intervals which honestly is too tedious and needs a better solution, used wifi web login apps which don't work to my satisfaction i.e. don't connect just when connection is lost; but in all these cases, the connection just seems to disconnect making me reconnect time and again :/. I would be utterly grateful to anybody who could suggest a solution for me for this as this is seriously making me lose my sleep.
ubz91 said:
Howdy all. I have a wifi at home which works with web authentication i.e. you connect your phone to wifi and on opening a browser, it redirects you to an authentication site wherein upon entering your username and password, you get connected. The authentication page requires you to keep the tab open and work with another tab, otherwise you lose the connection. When working on a PC, it works like a charm. I keep the tab open and wifi sticks for long even when you're not active. But on a smartphone (I have a Galaxy S3 here), it's a living hell trying to keep it stay connected. I've tried keeping the browser app resident in memory, created a tasker script to browse the URL and reconnect on certain intervals which honestly is too tedious and needs a better solution, used wifi web login apps which don't work to my satisfaction i.e. don't connect just when connection is lost; but in all these cases, the connection just seems to disconnect making me reconnect time and again :/. I would be utterly grateful to anybody who could suggest a solution for me for this as this is seriously making me lose my sleep.
Click to expand...
Click to collapse
what is the reason you don't want to use wpa2 for a home network?
mjz2cool said:
what is the reason you don't want to use wpa2 for a home network?
Click to expand...
Click to collapse
Dunno much about wifi security protocols but this is as my ISP provided. I've tried modifying the router protocols but nothing seem to make the web authentication go away.
ubz91 said:
Dunno much about wifi security protocols but this is as my ISP provided. I've tried modifying the router protocols but nothing seem to make the web authentication go away.
Click to expand...
Click to collapse
ah, ok, what kind of router is it?
mjz2cool said:
ah, ok, what kind of router is it?
Click to expand...
Click to collapse
A Motorola SBG901 wireless router.
ubz91 said:
A Motorola SBG901 wireless router.
Click to expand...
Click to collapse
is there any security settings tab? or maybe it's under the wireless settings tab
mjz2cool said:
is there any security settings tab? or maybe it's under the wireless settings tab
Click to expand...
Click to collapse
Nope, even setting security protocol to open shows the auth page. Might have to find a different solution for this.
ubz91 said:
Nope, even setting security protocol to open shows the auth page. Might have to find a different solution for this.
Click to expand...
Click to collapse
it could be the provider is forcing it, have you tried another router? normally, the web authentication is a proxy, so that could be the modem, or at the provider's end
mjz2cool said:
it could be the provider is forcing it, have you tried another router? normally, the web authentication is a proxy, so that could be the modem, or at the provider's end
Click to expand...
Click to collapse
Don't think the router has anything to do with this. Only the provider URL loads in the browser for authentication. So yeah, would know if it had something to do with the router.
I have a Sprint L600 on Boost Mobile, looking for working tether app/solution?
Tried Wifi Tether for root users with no luck.
EDIT: Solution
Code:
https://play.google.com/store/apps/details?id=net.snclab.wifitetherrouter
BUMP!!!
m4f1050 said:
I have a Sprint L600 on Boost Mobile, looking for working tether app/solution?
Tried Wifi Tether for root users with no luck.
EDIT: Solution
Code:
https://play.google.com/store/apps/details?id=net.snclab.wifitetherrouter
Click to expand...
Click to collapse
What settings to make the Mega work as an AP, or do we just choose the defaults?
jsimonson0 said:
What settings to make the Mega work as an AP, or do we just choose the defaults?
Click to expand...
Click to collapse
HotSpot / Tethering Settings:
(You set this up to your liking, I entered everything in case the program needs all the fields. I used my ssid, encryption type wpa2-psk, my password is my phone number, and Wifi Channel 1.)
Device Settings:
Interface: wlan0 (Default)
Method: 3 - HostApd
Drivers: nl80211
The rest I left alone. Please report if it works for you too. Thanks!
m4f1050 said:
HotSpot / Tethering Settings:
(You set this up to your liking, I entered everything in case the program needs all the fields. I used my ssid, encryption type wpa2-psk, my password is my phone number, and Wifi Channel 1.)
Device Settings:
Interface: wlan0 (Default)
Method: 3 - HostApd
Drivers: nl80211
The rest I left alone. Please report if it works for you too. Thanks!
Click to expand...
Click to collapse
Just what I needed to know; another rooted phone doing double-duty as an AP. Sweet...
jsimonson0 said:
Just what I needed to know; another rooted phone doing double-duty as an AP. Sweet...
Click to expand...
Click to collapse
Works like a charm, best $2 I've spent this year...! LOL
m4f1050 said:
HotSpot / Tethering Settings:
(You set this up to your liking, I entered everything in case the program needs all the fields. I used my ssid, encryption type wpa2-psk, my password is my phone number, and Wifi Channel 1.)
Device Settings:
Interface: wlan0 (Default)
Method: 3 - HostApd
Drivers: nl80211
The rest I left alone. Please report if it works for you too. Thanks!
Click to expand...
Click to collapse
The app and these settings worked perfectly on the Mega. Thanks :good:
twospirits said:
The app and these settings worked perfectly on the Mega. Thanks :good:
Click to expand...
Click to collapse
No prob. We're here to help each other! :good:
I've been using this app for about 2 months now without any problems, up until about 2 weeks ago. Now if I'm in default LTE mode, my laptop and tablet can connect to the hotspot, but I can't open a webpage in Firefox on either device, it just times out. I've verified that Firefox on my phone can access them. Also, I can open a cmd prompt on the laptop and get successful pings on google.com, but it still times out on the laptop or tablet.
If I reboot the phone to be on CDMA/EVDO then everything works fine, just slower. I'm on Sprint. I sent an email to the developer, and he stated he didn't think it was a problem in the app itself but advised me to check the APN settings. I can't seem to locate them on this phone.
Anyone else having this problem, or have any suggestions?
Thanks.
AToddSmith said:
I've been using this app for about 2 months now without any problems, up until about 2 weeks ago. Now if I'm in default LTE mode, my laptop and tablet can connect to the hotspot, but I can't open a webpage in Firefox on either device, it just times out. I've verified that Firefox on my phone can access them. Also, I can open a cmd prompt on the laptop and get successful pings on google.com, but it still times out on the laptop or tablet.
If I reboot the phone to be on CDMA/EVDO then everything works fine, just slower. I'm on Sprint. I sent an email to the developer, and he stated he didn't think it was a problem in the app itself but advised me to check the APN settings. I can't seem to locate them on this phone.
Anyone else having this problem, or have any suggestions?
Thanks.
Click to expand...
Click to collapse
Try changing your DNS to 208.67.222.222 208.67.220.220 4.2.2.1 4.2.2.2 4.2.2.3 4.2.2.4 etc etc
m4f1050 said:
Try changing your DNS to 208.67.222.222 208.67.220.220 4.2.2.1 4.2.2.2 4.2.2.3 4.2.2.4 etc etc
Click to expand...
Click to collapse
Didn't change anything. Re-reading my original post, I realize I wasn't clear on a point:
I can ping google.com and get replies from a command prompt on my laptop when I'm attached to the wifi router and the phone is in LTE mode, but my web browser (firefox) will not display the google home page. If I select CDMA mode on the phone, then I can get to google from firefox.
Since I'm getting ping replies, I doubt DNS is the culprit. Seems like it's something with port 80. I'm starting to think Sprint did something to block the app on the LTE network.
Just to check, I reset my phone to factory default and re-installed the app. Same results.
Anyone else having problems with this while on LTE?
Thanks.
AToddSmith said:
Didn't change anything. Re-reading my original post, I realize I wasn't clear on a point:
I can ping google.com and get replies from a command prompt on my laptop when I'm attached to the wifi router and the phone is in LTE mode, but my web browser (firefox) will not display the google home page. If I select CDMA mode on the phone, then I can get to google from firefox.
Since I'm getting ping replies, I doubt DNS is the culprit. Seems like it's something with port 80. I'm starting to think Sprint did something to block the app on the LTE network.
Just to check, I reset my phone to factory default and re-installed the app. Same results.
Anyone else having problems with this while on LTE?
Thanks.
Click to expand...
Click to collapse
I know the app says if you have issues to turn on (or off a certain feature -don't remember which one is it now)
m4f1050 said:
I know the app says if you have issues to turn on (or off a certain feature -don't remember which one is it now)
Click to expand...
Click to collapse
I contacted the developer Fabio, and he thinks I need to change some settings in the APN IPV4 protocol. Problem is, I can't seem to find where to change the settings on this phone. They should be in settings>connections>more networks>mobile networks, but the options are not on that screen. I'm really starting to regret getting this phone. I love the phone itself, but Sprint did a few things to "dumb down" the ROM that just plain piss me off. OK, I get they took out native tethering so they could sell that option. I don't like it, but at least it makes some kind of sense. They also took out the option in contacts to send a incoming call from a given contact straight to voicemail. That just makes no sense whatsoever. Also, I don't like there are no custom ROMs for this phone. If I could get this phone with a plain vanilla Android without all the Sprint mods, I'd be in heaven.
Anyway, does ANYONE have Wifi Tethering working on this phone (LPH-600) with Sprint and LTE?
AToddSmith said:
I contacted the developer Fabio, and he thinks I need to change some settings in the APN IPV4 protocol. Problem is, I can't seem to find where to change the settings on this phone. They should be in settings>connections>more networks>mobile networks, but the options are not on that screen. I'm really starting to regret getting this phone. I love the phone itself, but Sprint did a few things to "dumb down" the ROM that just plain piss me off. OK, I get they took out native tethering so they could sell that option. I don't like it, but at least it makes some kind of sense. They also took out the option in contacts to send a incoming call from a given contact straight to voicemail. That just makes no sense whatsoever. Also, I don't like there are no custom ROMs for this phone. If I could get this phone with a plain vanilla Android without all the Sprint mods, I'd be in heaven.
Anyway, does ANYONE have Wifi Tethering working on this phone (LPH-600) with Sprint and LTE?
Click to expand...
Click to collapse
Try APN Backup Restore, do a backup, gab the XML and open it with notepad or text wranger or any text editor to see if you find the setting that needs to be changed.