hello i just get my hdc g9000 octacore. i update with the official firmware but my back camera stop working, only front camera works...someone can help to fix it, please it a new phone no more than 1 hour in my hands and crash it...please help me
leo_hacker82 said:
hello i just get my hdc g9000 octacore. i update with the official firmware but my back camera stop working, only front camera works...someone can help to fix it, please it a new phone no more than 1 hour in my hands and crash it...please help me
Click to expand...
Click to collapse
Do you still have a stock backup of the rom ? If so, how did it look like ?
ive got the same problem as you do.. when putting other roms on my phone the back camera stops working, all works fine on my stock original rom tho..
I flash muy backup with flashtools but todo make the camera work i have todo make files for flashtools with mtk droid tools...then i flash and muy camera works....no roms works...onlybstock
Hi, Do you have your lk.bin from your backup?
If you have it, try flashing just lk.bin after the non-stock rom, could work.
And could you send me your lk.bin so I can try it too?
Regards :good:
yea i have it the lk.bin, send me your email adress cuz here i cant upload the file.
Thanks, but I found the orignial lk.bin, but I guess it doesn't work from 4.2 to 4.4...
I have the cell phone working with the original 4.2.2 (store provided) since I couldn't find a 4.4 with both cameras working, could only get the front one to work...
Stips on my display after flashed my phne
Hello, I have received, few hours ago, my STAR G9000 smartphone, with Android 4.4.2 KK. After making the root using VROOT successfully, I tried to update the rom, downloading it from the site needrom the latest version of 27.08.2014. I have upgraded using the "Firmware Upgrade" function (Flash Tool). After a first failed attempt, the second has been good, but when I turned on the smartphone, appeared to me initially a gray screen (all vertical lines), then the strips have changed color and I also heard the sound that indicates the startup of the phone.
I have could also, knowing the position of the lock on the display, perform the unlock the screen (type noise water), but I still see only stripes.
The phone did not take any shock and the strips have appeared only after flashing the phone.
Does anyone know of a similar problem and can help me solve it?
reflash ur stock rom, from newestrom.com or need rom, if u make a backup reflash...
camera
Could you send me driver lk.bin at my email man???
Related
Hi,
so after I had installed the new Eclair onto my device, everything worked fine, but camera app started to say not available (you can choose wait or force close). What happened? How can I solve this problem?
If anybody has a good idea or something, please share! (my phone is not more than a week old...)
thanks
I am facing the same issue. I am just trying to reflash using SEUS to see if it sorts it out. I used the same image to flash a couple of other peoples X10s, and they haven't had any problems so might just be the luck in the draw...
Update:-
I have flashed using SEUS and when starting the camera from either holding the shutter button or choosing camera from the apps menu I get the same error message:-
"Sorry! Activity Camera (in application Camera) is not responding"
After killing the Camera app, it will start up but will display
"Camera not available"
After reflashing with the generic global firmware again and checking the camera before changing any other settings, it still fails.
The error message is now
"Sorry! Application Camera (in process com.sonyericsson.android.camera) is not responding"
The only options are Force Close and Wait.
Has anybody got any ideas on how to get around this issue?
I tried to rewrite camera app at system, but it was not succesful. Device is not rooted (yet). Maybe it solves?
I suffer the same problem. After a few study I doubt if the SEMC_IMX046_Camera driver is missed / corrupted on the phone which led to this 'Camera not available' symptom. Anyone able to help us out?
is it sure? if this causes the problem, all that we need to change/recover it with the original one. PLEASE HELP US!
same problem here. caused by an error while flashing the cam to hd. now
always forces to close. :/
hi.. i got the same prob
i got the same prob..its saying camera unavailable after updating it to 2.1.. do u know wt to do to get back the camera.. its brand new. and i am unable to understnd wt to do...
hello guys .. please did anyone get the solution..plss reply
i got the same prob..its saying camera unavailable after updating it to 2.1.. do u know wt to do to get back the camera.. its brand new. and i am unable to understnd wt to do...
raja05c91 said:
i got the same prob..its saying camera unavailable after updating it to 2.1.. do u know wt to do to get back the camera.. its brand new. and i am unable to understnd wt to do...
Click to expand...
Click to collapse
I had this problem too! Is your phone rooted? You need to replace the SemcCameraApp.apk file
i dont know tht file even exists!!! can u tell me how to find it and install on the mobile .. its still saying camera not avaialble !
vpllover said:
I had this problem too! Is your phone rooted? You need to replace the SemcCameraApp.apk file
Click to expand...
Click to collapse
can u tell me how to do the replacement plssss
same problem! pls help
I just bought a x10 and tried to use the camera using the camera application and turn black and after a while it says "Sorry! Application Camera (in process com.sonyericsson.android.camera) is not responding. any idea?
Hey
I will not create similar topic cause I have same problem, so I'll write there.
As I wrote my problem is same as speakers previously. It's really annoying. Does anyone know how to solve this problem? I use stock 2.1 firmware. The most funny is that my xperia was bought just on the 1st of april so it's like a new one, whats wrong with it?
vpllover said:
I had this problem too! Is your phone rooted? You need to replace the SemcCameraApp.apk file
Click to expand...
Click to collapse
If it would help, could some1 send me working SemcCameraApp.apk and write me in which one directory in my rooted phone can I find it?
Regards,
Adam
@edit: I forgoten to write that yesterday I reinstalled system via SEUS on my X10. Problem still exists.
I saw that there was a camera fix zip file posted a couple of days ago. It seems that there are people whose upgrade to 2.1 was incomplete.
I went and searched and found it archived, it was March not recently. It will try to reflash your camera firmware for HD which may be the problem if you stopped the flash progress when the 'flashing camera' icon was on the display. http://forum.xda-developers.com/showthread.php?t=991442
HOWEVER I THINK IT NEEDS A ANDROID SDK ON YOUR PC TO RUN
Another thing is that if the permissions for the camera app are incorrect it gives similar messages.
The permissions should be if you look in the /system/app directory for the SemcCameraApplication.apk rw-r--r-- if you have Root Explorer you can mod them with the checkboxes. Read for Owner, Group, Others and Write for Owner only.
Sent from my X10a using XDA Premium App
Hmmm.. And where did you see it?
Mrozik1990 said:
Hmmm.. And where did you see it?
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/showthread.php?t=991442
HOWEVER I THINK IT NEEDS A ANDROID SDK ON YOUR PC TO RUN
i tried to run camera on android (it just got clicked) and first everything was black(with camera options), then it went green(with camera options), so i thought that its just that android build doesnt support camera right now.
but today i tried to open camera on bada, but it showed "camera failed".
i tried many a times, but everytime its the same! rebooted and then tried camera on bada, but it still is not working!
can anyone help me out?
anyone else faced the problem or its just me???
(i did try to search the problem in forum..but showed no result)
Hi Max
You have XXJK1 am i wrong?
Do you remember flashing *.pfs file while upgrading from XXJID ???
If you think you didn't flash that file then flash it alone and let me know if your Camera is fixed or not
Best Regards
yes you are right, i m on XXJK1..!
umm..but i dont remember if i flashed the .pfs file or not, but in either case i can flash the .pfs file again right?
i'll give it a try n come back
thanks
haha..now camera works like a charm (but not the android one yet..lol )
thanks a lot
now i m sure i didnt flash it last time! my bad!
Hey Guys I am really impressed about the device named goophone but in real according to the stock launcher it is a kuphone.
So first i can not image who this price is possible but good i accept
for only 70€ including dhl and some cases
So as second some information about this device:
Specs according to Shop: (dhgate)
Model i5C
Band 2G: GSM 850/900/1800/1900MHz
Sim Card Single SIM, Single standby (Micro SIM Card)
Shell Material Plastic
OS Android 4.2
CPU MTK6572, Cortex A7 dual core, 1.2GHz
ROM 4GB
RAM 512MB
Display Size 4.0 Inch
Type TFT, Capacitive touch screen
Resolution 800 x 480 pixels
FM Radio Yes, earphone needed
Earphone Port 3.5mm
Card Extend Support TF card up to 64GB extended
Camera/Picture Resolution Dual Cameras, front camera 2.0MP, back camera 2.0MP with flashlight, up to 1600 ×1200 pixels resolution
GPS Yes
WIFI Yes, 802.11 b/g/n
Bluetooth Bluetooth 2.0
Dimensions 124 x 60 x 8.9 mm
Net Weight(Including battery) 117g
So why i am creating a new thread ?
I observed that there are some bugs and the launcher is so slow and not really i0S7
I also noticed that some other i5c clones have better launcher, so possible to port some systemapps ?
I am not a developer but i can find some recouces for the phone
I also can upload my current rom( but how )
So if you have questions or have the same phone please support his thread for any roms :
You know if we dont care for this noone will do , and for this price, a softwaresupport from manufactor, it is a prank /fool
Sorry for my not ideomatic english , i am german
So stay unhurt and be happy ^^
KiPhone , GooPhone ! KuPhone
Hi ,i own a Goophone i5c , but i thing there is more a Kiphone i5c 2g.
Anyone of you know how to change the stock launcher and set it as default ? i download a few launcher but nothing i cant set them as default launcher ! i tray even a few app like home switcher and other but nothing seem to work , now im stuck with the stock launcher KuLauncher or something like this , but this launcher is very laggy .
Thank You!
Hello I have bought a goophone i5C or a kiphone i5C
apple logo at back (seems painted)
MTK6572/512M of RAM/ photo 2MP back
come with a rom which is a mix of IOS7 and IOS6
when I try a root method on reboot It Bricked so I need a dump or the original rom to flash it under SP Flash Tool
I have tried some Flash with SP Flash Tools with some device with mtk6572 with the same spec (MTK6572 1Ghz, 512 Ram, 4G Rom, graphic Chipset Mali 400MP, ...)
SP Flash Tool work but I have a black screen with a sound with start ...
If someone can give me a dump of your goophone i5C - Kiphone i5C It will be great
there is a tuto how you can do it
http://www.needrom.com/tutorial-backup-rom-with-mtkdroidtools/
Clean rom would be great
creasqui said:
So if you have questions or have the same phone please support his thread for any roms :
Click to expand...
Click to collapse
Great initiative, I received mine yesterday (gadgetdealer phone 5c-> same specs) I already lost a whole evening with mtk droid and sp flash tools. So far I managed just to make a dump of the current rom and noticed the kulauncher apk in there besides other non wanted apk's. But none of any threads is very clear of procedures and don't want to brick it.
For root: framaroot works (select supersu). Googlecalendarsyncadapter.apk 4.2.2 was required to get de calendar working with Google. And i had do update youtube manually to get it playing videos.
Update: I tried to flash it with the Goophone i5c rom you can find in several other threads. I am not really sure if it is compatible but so far I haven't been able to start the actual flashing... it seems it cannot find the device. Already tried by putting the phone in bootloader mode... no luck (but perhaps it saved me from a brick phone). Does anybody found a way to get a better notification bar that shows icons for messages like whatsapp, gmail,play store... ? I already installed the SystemUI.apk from Goophone i5c.. it's compatible but does not change anything.
Sup guys
I just received mine one day ago and I noticed that is going veeery lagy. I just started to fight with it. If I make any progress, I'll share my results with you. Btw This thread is a great idea!!!
Regards
Hello to everybody,
I have received one phone as described (bought on DHgate).
I have root it with farmaroot: ok.
But, I can not change the launcher, I have the launcher kuLauncher.apk. I have tried with different apps: home switch, home manager, ... but any of them can erase kuLauncher as the home launcher.
Does anyone reached to change it?
I´m in the same situation, I have a KUPHONE but this model includes GPS and 3G (WCDMA - 2100 MHz). The stock ROM has several mistakes and it is very laggy. Now I have added a problem after testing 2 different SIMs: I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK...
I rooted it without problems in order to make work the GPS, but I was not able to make work the 3G (I had selected WCDMA in engineer mode and It did not work) .
There is no info about this phone on internet, the codes of Goophone do not work, and I am reading that the ROMs do not work neither...
Please I need a solution! A ROM that works well on this device.
Thanks a lot in advance, :good:
I have this phone as well and would love to put a new rom on it or change the launcher. Any progress on this? I will say there are menus when holding the volume buttons down and the power button. But that's mainly recovery and some add on side loading stuff. Then there's another menu but it's in full Japanese and I can't make any of it out.
Hi guys, I recently bought a GooPhone i5C, rooted it fine with VRoot, tried to update the ROM over the weekend, and ended up bricking my device.
I had taken a backup of my GooPhone at work, and also at home. I tried restoring from a stock KuPhone ROM, but this just left my phone on the Apple logo (had to take the phone apart to get to the little button near the power switch that kills power to the phone). Once back at work on Monday morning however, I restored (loaded the scatter file then hit Download), and my phone started working again.
So in short, I have uploaded my backup if anyone wants it, although you may have to use MtkDroidTools to 'prepare' the files for flash, and then use the scatter file that this creates. I pretty much just registered to post this, so I can't post the link to the backup just yet (PM me or something?).
help! i deleted kulauncher...
ChaosEn3 said:
Hi guys, I recently bought a GooPhone i5C, rooted it fine with VRoot, tried to update the ROM over the weekend, and ended up bricking my device.
I had taken a backup of my GooPhone at work, and also at home. I tried restoring from a stock KuPhone ROM, but this just left my phone on the Apple logo (had to take the phone apart to get to the little button near the power switch that kills power to the phone). Once back at work on Monday morning however, I restored (loaded the scatter file then hit Download), and my phone started working again.
So in short, I have uploaded my backup if anyone wants it, although you may have to use MtkDroidTools to 'prepare' the files for flash, and then use the scatter file that this creates. I pretty much just registered to post this, so I can't post the link to the backup just yet (PM me or something?).
Click to expand...
Click to collapse
please can someone help me i deleted my kulauncher and now it wont start up again it just keeps showing the boot up logo
i cant reach it with usb cause it wont show anything please help me..
kuLauncher
angularpainzzr said:
please can someone help me i deleted my kulauncher and now it wont start up again it just keeps showing the boot up logo
i cant reach it with usb cause it wont show anything please help me..
Click to expand...
Click to collapse
MascioSpam94 said:
Hi guys i deleted the kuLauncher.apk and now the phone bootloop on Apple logo.
I've found that we can use adb when the phone boot in factory mode but i can't find the kulauncher.apk file on the internet.
The phone is rooted but i can't have root shell via adb.
Days ago i had a backup of the rom whit MTK tool but if i try to flash it whit SP_flash tool it return me error 8038.
Anyone can help me?
Edit: the phone came from dhgate, if you wait (bad internet connection) a week i can upload my backup for you.
Ps: mine doesn't have the external sd-card installed but near the battery there is a free micro-sd card slot
Sent from my Galaxy Note II using xda app-developers app
Click to expand...
Click to collapse
Here you go
PS. Tell me if you need the .odex file aswell
PPS. I'm working my way throught the rom to find a solution for changing the stock launcher (iLauncher is sooo much smoother on the device) It's just the launcher thats laggy the phone itself is pretty smooth
rom kuphone i5c
i need rom kuphone i5c
need help
I also have same phone, mistakenly without taking its rom backup i deleted some system files,
now my mobile stop at booting - just adroid logo apprear (not goto main screen)
I cant do any thing with it because usb debugging is also off, can any one provide me its original rom, i will be very thankful to him plus i will pay him too.
waiting please reply
Clean rom
In my quest for a clean rom i came on this one: needrom.com/mobile/ px-c5s5 . Any chances it would work on our devices? Or could it help to mix up with our original rom... Just a thought.
My biggest frustrations with this phone.
Hi, I also bought this phone (for my daughter with her money) without knowing what it was. I believe it's a kuPhone due to a folder 'Kustore' on the device and the microphone hole which is very close to the left bottom screw and further away from the audio jack than on real GooPhone.
Anyway, this phone can be bought very cheap (65eur, free shipping ) and performs well.
However I see a general problem with signal reception:
Wifi: have to be in very close range to the router, about 5m maximum.
3G: rather slow, speed test reporting max. 1Mbps.
GPS: slow locking (several minutes) and not very precise, but still usable.
FM: worse than my other devices inside the house.
Other remarks:
Audio jack only fits 3 pin headphones, 4 pins with microphone do not work well enough to be usable (low volume, shallow sound).
Camera is only 2 megapixel and show green shading under artificial light and some angles. LED flash very weak, does not help.
Microphone mute is activated accidentally when calling (by your cheek pressing the screen at the mute icon, proximity sensor does not seem to work as expected.
When you go to recent call, the caller app crashes.
512 MB memory seems to fill easily, phone blocks and need to cold boot by pressing HOME+POWER buttons together for 10 seconds
Apart from these I do not see any of the problems mentioned in this forum, UI is response and working very well.
I'm prepared to share my ROM if this is of any use to someone, but he has to explain me how. I never did such a thing.
If anyone can help to improve signal reception, welcome!
Hi guys,
I bought a similar phone but I don't know if is agophone or a kuphone.
There is any way to understand what I bought?
There is a way to change the recovery boot in English, now is in Chinese and is not easy to manage
w1r3d said:
I´m in the same situation, I have a KUPHONE but this model includes GPS and 3G (WCDMA - 2100 MHz). The stock ROM has several mistakes and it is very laggy. Now I have added a problem after testing 2 different SIMs: I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK...
I rooted it without problems in order to make work the GPS, but I was not able to make work the 3G (I had selected WCDMA in engineer mode and It did not work) .
There is no info about this phone on internet, the codes of Goophone do not work, and I am reading that the ROMs do not work neither...
Please I need a solution! A ROM that works well on this device.
Thanks a lot in advance, :good:
Click to expand...
Click to collapse
I have the same problem??? any fix?
DonSaffadu said:
I have the same problem??? any fix?
Click to expand...
Click to collapse
hi guys I solve this problem by setting my date and time, and the phone work fine now!
"I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK..."
I've seen this on my phone too, but it's been a while ago and I was able to fix it. It's working since. I don't remember what I did to fix it, but it was not something difficult to do, so don't despair and try a few things.
bootloader
Anyone succeed to flash a boot loader on the kuphone?
Guys maybe you can help me, my phone is behaving very strange. It is a Tianhe H920+ with 4gb ROM, identical with Mlais MX58 Pro, Auxus Nuclea N1 and others.
Roms for Auxus Nuclea N1 are working perfectly, but, first of all i have problems with the rear camera, i am not getting any error messages, but just only the front camera is working and the switch camera option is missing, after i install some third party camera app it freezes.
Phone was suited with Tianhe ROM, build march 2014, for sure i made backup. What i have found out, when i flash the original BOOT.IMG, camera works fine, but the old kernel will be installed. I have unpacked it, checked also init, init.project files, they are totally the same, no change there, just the Zimage differs / Kernel.
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware, but like i already mentioned rear camera is not working with other kernels, all other functions are ok. Is there any possible solution? Framework fix or something please?
Till now i have tried almost 10-15 roms, from MX58 Pro, Star, Tianhe, but non of them is suited with a kernel with working rear camera :crying:. Thank you very much.
Heyy delltech1.. I've also facing similar issue...have you found any solution to your problem?
Tianhe H920+ Wake up issue
delltech1 said:
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware
Click to expand...
Click to collapse
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Tianhe
Eleichstetten said:
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Click to expand...
Click to collapse
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
delltech1 said:
Before you will flash it, take the PRELOADER file from a good known working rom and replace it.
Click to expand...
Click to collapse
Could you recommend a good preloader?
Tianhe
Eleichstetten said:
Could you recommend a good preloader?
Click to expand...
Click to collapse
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Camera still not working
delltech1 said:
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Click to expand...
Click to collapse
I have tryed all roms from needrom and pandavile..nothing.
Now I tried the ROM that was offered in the Pandawill Forum for 8GB Version.
This ROM does include a working preloader (maybe has been changed?)
Anyway, when I flash this ROM, it works, but problems persist.
No change.
CWM 8gb ver. ROM
HI guys, Please could some one upload the 8GB rom flashable with CWM recovery I can not do it with flashtools my usb conenctor is damaged...
PLEASE HELP and save my ass I am starting to be despaired with this phone
THANK YOU for any support and have a nice day
Modified version of Note 3 yasuu ROM.
Just for the case that someone do not know how to replace boot.img (kernel 2014) and replace camera drivers I am uploading modified version of Note 3 yasuu ROM.
No flickering screen,No back camera bug or green camera,No unlock freez yet.
Only bad thing is battery usage, maybe because my USB connector is damaged.I do not know try it out and share your results about the baterry please.
LINK (CWM zip file) :
mediafire.com/download/v3n65fltmwka52z/ROM_NOTE3_Kernel_2014_H920+.+Cam.Drivers.HanyxX.zip
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
OK, Gave it a second try. This time without trying to root.
Well, the wake up issue does not exist anymore.
Unfortunately, it´s just because the phone does not start to Deep Sleep anymore.
It reduces processor rate, but does not start Deep Sleep.
That´s the cause for higher battery consumption.
By the way:
- The package of my phone is not labeled "Tianhe", but "CGC".
- Both cameras did work with this Rom.
- My phone has 8GB of memory and stock ROM is 03/2014
Hello
Eleichstetten said:
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
Click to expand...
Click to collapse
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
I did reset my phone with this firmware from Pandawill Forum (8GB version). The firmware is for H920+ that are produced after March 2014.
It seems, that there has been a change of camera hardware.
http://www.pandawillforum.com/showthread.php?25569-ROM-ROM-for-Tianhe-H920&p=136188&viewfull=1#post136188
This seems to be real stock.
If your phone is produced after March, 2014 and this firmware does not solve the problem, there is a high probability that it is defective.
How to find out?
How can i find out what is the date manufacture of my phone?
about Tianhe H920+ turbo /pandawill/, rear camera problems
validoican said:
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
Click to expand...
Click to collapse
Hello,
After trying all firmwares from panda and needrom i find that there is a hardware problem. BAD CONNECTION between board and camera conector!
Try to open the phone and press firmly camera connector to the board. Then put above something thick 1 mm (non metal) to hold the connector in same position.
It's worked fine for me. Good luck to you!:good:
delltech1 said:
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
Click to expand...
Click to collapse
How do you unbrick your phone... ??? Please advise !!!
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Papi62 said:
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Click to expand...
Click to collapse
Did you manage to find a stock 4.4.2. ROM?
I'd need it as well cause my M7 came with 4.2.2 and i'd like to update it while I did not find any OTA update to the 4.4.2 release so far (don't know if OTA even works cause it says error connecting to the network even though it also says the system is uptodate).
Should you still need the stock 4.4 ROM, there are a couple of members in this thread http://forum.xda-developers.com/showthread.php?t=3089024 who got sent a 4.4 m7 firmware, you could try it out with a backup from them.
M7 flashing
Papi62 said:
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Click to expand...
Click to collapse
Hi,
I got X01 today...I would like to flash it ...but how to do it? How to switch the watch into flash mode? There is no volume buton as on ordinary mobile. And how to put the watch in recovery mode? Which button or how to switch the watch.
Thank you very much in advance for assistance..
Regards
Filik
I have a backup of stock room if neededfirst thing I did was take a nand backup