Okay so I had flashed the latest version of cyanogenmod 11 v12 on my canvas HD using cwm.It worked all fine when I was using the v7 but after I updated it to v12 I get an 'com.android.systemui has stopped' error and all I can press is okay and it kind of reboots itself and takes me to the lockscreen, then the loop starts. I have to reboot everytime this happens.
I once flashed it again, doing a factory reset and it worked but only for a while, the error showed up again.
How to solve this!?
Please help me out
Sushantk01 said:
Okay so I had flashed the latest version of cyanogenmod 11 v12 on my canvas HD using cwm.It worked all fine when I was using the v7 but after I updated it to v12 I get an 'com.android.systemui has stopped' error and all I can press is okay and it kind of reboots itself and takes me to the lockscreen, then the loop starts. I have to reboot everytime this happens.
I once flashed it again, doing a factory reset and it worked but only for a while, the error showed up again.
How to solve this!?
Please help me out
Click to expand...
Click to collapse
CM11 is still in developing state so be patient til it becomes buggless
Sushantk01 said:
Okay so I had flashed the latest version of cyanogenmod 11 v12 on my canvas HD using cwm.It worked all fine when I was using the v7 but after I updated it to v12 I get an 'com.android.systemui has stopped' error and all I can press is okay and it kind of reboots itself and takes me to the lockscreen, then the loop starts. I have to reboot everytime this happens.
I once flashed it again, doing a factory reset and it worked but only for a while, the error showed up again.
How to solve this!?
Please help me out
Click to expand...
Click to collapse
just do a cache n dalvik cache wipe n give one more try...
its quite stable for daily use
Related
Hi Guys,
Yesterday i installed Paranoid Android on my phone ( full wipe data and cahe ) and it started to reboot when making calls.
So i decided to install CM9 RC1 and got the same problem.
I reverted back to stock and now my phone is fine.
Someone has a clue of what's happening ?
I tried different kernels but got the same problem.
Your help is appriciated.
Greetings,
PTiT
Have you formatted /system and fixed permissions?
Inviato dal mio GT-I9100 con Tapatalk 2
PTiTDaV said:
Hi Guys,
Yesterday i installed Paranoid Android on my phone ( full wipe data and cahe ) and it started to reboot when making calls.
So i decided to install CM9 RC1 and got the same problem.
I reverted back to stock and now my phone is fine.
Someone has a clue of what's happening ?
I tried different kernels but got the same problem.
Your help is appriciated.
Greetings,
PTiT
Click to expand...
Click to collapse
If you are doing it through CWM
Try installing after wiping Dalvik cache available in advance.
PTiTDaV said:
Hi Guys,
Yesterday i installed Paranoid Android on my phone ( full wipe data and cahe ) and it started to reboot when making calls.
So i decided to install CM9 RC1 and got the same problem.
I reverted back to stock and now my phone is fine.
Someone has a clue of what's happening ?
I tried different kernels but got the same problem.
Your help is appriciated.
Greetings,
PTiT
Click to expand...
Click to collapse
hi.
Had same kind of issue. Random reboot/shutdown.
I installed 1.6 last night. With full wipe of everything I could find in my kernel to wipe.
then, install paranoid.
then install G-apps.
then WIPE cache again.
then fix permission.
as recommended in the official thread by the dev.
It solved my issue.
good luck.
Same problem here.
Any stock rom (including ICS) works well.
I tried installing paranoidandroid 1.6.
Factory reset
Wipe cache
Wipe dalvik
Install gapps and camerafix.
wipe cache.
Set phone dpi to 184
reboot
And basically, everytime i try to make a phone call, it looks like that the phone screen (the one that displays the contact picture and the close-call red button) is crashing.
I can hear 10 seconds of phone ringing/conversation and then the system reboots, showing me the boot animation.
The only way to fix this, so far, is by installing a stock rom
..probably I am missing something, but I cannot get it working.
I resolved mine by reverting to a GB stock rom and flashing the lastest nightly from there.
box2k2 said:
I resolved mine by reverting to a GB stock rom and flashing the lastest nightly from there.
Click to expand...
Click to collapse
So basically you Installed the latest CM9 nightlies rather then paranoidandroid ?
I installed Cyanogenmod 9 RC2 by ivendor on my Samsung Galaxy S Plus, along with suggested gapps package, but none of the Google apps shows when the phone starts. I tried reflashing, purging data and cache files, installing gapps fixer but none of it helped. I even installed store app manually but it closes immediately after starting. It looks like I'm stuck with it. How do I solve this annoying issue?
Please, help
ivendor gapps problem
mico.barac said:
I installed Cyanogenmod 9 RC2 by ivendor on my Samsung Galaxy S Plus, along with suggested gapps package, but none of the Google apps shows when the phone starts. I tried reflashing, purging data and cache files, installing gapps fixer but none of it helped. I even installed store app manually but it closes immediately after starting. It looks like I'm stuck with it. How do I solve this annoying issue?
Please, help
Click to expand...
Click to collapse
I vave same problem ,not with rc2 but with all ivendr"s roms
when you find solution please post!
Anyone?
I finally made it .
I flashed with
Code:
recovery-clockwork-6.0.1.2-ariesve.tar.md5
, and with ivendor firmware, but I couldn't make gapps to work. I tried flashing with
Code:
recovery-clockwork-5.5.0.4-ariesve.tar.md5
, wiped data/cache/dalvick, then updated with ivendor firmare, and it all went well. I got stuck in CWM recovery though, but after flashing back to
Code:
recovery-clockwork-6.0.1.2-ariesve.tar.md5
again, the Google configuration screen showed up after booting...
Finally
solved
mico.barac said:
I finally made it .
I flashed with
Code:
recovery-clockwork-6.0.1.2-ariesve.tar.md5
, and with ivendor firmware, but I couldn't make gapps to work. I tried flashing with
Code:
recovery-clockwork-5.5.0.4-ariesve.tar.md5
, wiped data/cache/dalvick, then updated with ivendor firmare, and it all went well. I got stuck in CWM recovery though, but after flashing back to
Code:
recovery-clockwork-6.0.1.2-ariesve.tar.md5
again, the Google configuration screen showed up after booting...
Finally
Click to expand...
Click to collapse
siimply flashng this gapps-gb-20110114-signed
Hi guys,
I have recently registered and was wondering if someone can help me please.
I have a rooted Galaxy S3 running PA 2.54. I used Goo Manager to install TWRP and download PA 3.0 and the latest Gapps to my SD card.
I booted into recovery. Did a factory reset, wiped cache, wiped dalvik. Then installed rom, gapps and did a reboot.
I get past the boot screen, but then I get two error messages: "Unfortunately, the process com.google.process.gapps has stopped" and "Unfortunately, Setup wizard has stopped". I keep pressing ok, but it doesn't allow me to progress any further. I can't access anything else and the only thing I am able to do is hold down the power button to reboot.
I have made a back up and restored my phone back 2.54 and everything works fine. I tried it one more time and the same thing happened.
Any help will be really appreciated.
shaz4215 said:
Hi guys,
I have recently registered and was wondering if someone can help me please.
I have a rooted Galaxy S3 running PA 2.54. I used Goo Manager to install TWRP and download PA 3.0 and the latest Gapps to my SD card.
I booted into recovery. Did a factory reset, wiped cache, wiped dalvik. Then installed rom, gapps and did a reboot.
I get past the boot screen, but then I get two error messages: "Unfortunately, the process com.google.process.gapps has stopped" and "Unfortunately, Setup wizard has stopped". I keep pressing ok, but it doesn't allow me to progress any further. I can't access anything else and the only thing I am able to do is hold down the power button to reboot.
I have made a back up and restored my phone back 2.54 and everything works fine. I tried it one more time and the same thing happened.
Any help will be really appreciated.
Click to expand...
Click to collapse
Can anyone help with this please?
I am trying to install cm10 on my Samsung sgh-i577.I have pushed the new cwm on the device go to install zip from sd card.cm10 will install fine when it boots it just hangs on cyangenmod screen. I have let it sit for 10 mins as they have said in the thread for the new kernel. Reboot and it still hangs what I am doing wrong? I am coming from stock ICS. Should I wipe factory data in cwm and wipe cache partition and wipe d. cache and then install?
I am sorry I left that out but I also flashed the latest gpapps for cm 10 I have tried this 6 times. And it just gets stuck at boot I have to go back to stock ICS. I have flashed AOKP,ROOTBOX,CM10 All get stuck
That happend to me too xS. Try what Sewrizer says :good:
I got it I wasn't wiping factory data as soon as done it worked fine but the android keyboard isn't working on cm10 it keeps saying has stopped working. And those are the files I was trying to use and thank you for your help.
I fixed it was the latest version of gpapps that was causing the problem
Anyone wanna move the Convo to the full thread?
http://forum.xda-developers.com/showthread.php?t=1926253
sent from my SGH-I577/LiquidSmooth/1.5oc LZ kernel
I couldn't post in that thread not enough posts
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
hello,
i never posted here before but i am following this site for a while and flashed lots of roms using the data here.
i got into a problem trying to flash the kitkat on my HTC sensation 4G.
i am using ATM the android 4.2.2 CM 10.1 albinoman887 rom.
i tried installing the android 4.4.1 according the instructions posted by android1234567 here:
http://forum.xda-developers.com/showthread.php?t=2530073
i did factory factory reset, cache wipe, and davlik wipe
after that flashed the Kernel Aroma installer, the rom and the gapps from this link.
after i flashed them i rebooted and the phone doesnt pass the reboot screen, got stuck on it for few seconds and then restart and stuck again.
could anyone help me resolve this?
thanks ahead.
Dan
ok
if mean bootloop then again do the same step but wipe the dalvik cache,data,cache means clean your phone and then install the rom u will out of boot loop
tried it, it didnt work, still bootlooping.
when i install the gapps file it says it detects 4.4 rom.
any other ideas?
thanks for the help