I rooted my verizon phone with Casual and installed TWRP and Alliance Rom build 26. All worked well and I used the phone for the past week.
I did have some problems with incoming phone calls not displaying the correct location that the number was coming from or the person that it was coming from. So this morning I decided to backup and reinstall the Alliance Rom 26 original that I had stored on my SD card.
I wiped my Cache and Dalvike as required then wiped the system. As I went to instal the Alliance Rom for some reason I used reboot and the phone went to the Startup screen saying Galaxy 2 and stayed there. The power button had no effect and After waiting for 10 minutes I decided to take the battery out and do a Volume down Home button and power restart
The screen now has the big green android man on it in the left hand corner in RED is ODIN MODE
Product Name SCH 1605
Custom Binary Download Yes (1 counts)
CURRENT BINARY SAMSUNG OFFICIAL
System Status Official
Under Android Man it says Downloading Do not turn off Target !!
I have tried to turn the device off and it doesnt do anything
What can I do to get this going
This PROBLEM IS NOW SOLVED !!!
Eddioo said:
I rooted my verizon phone with Casual and installed TWRP and Alliance Rom build 26. All worked well and I used the phone for the past week.
I did have some problems with incoming phone calls not displaying the correct location that the number was coming from or the person that it was coming from. So this morning I decided to backup and reinstall the Alliance Rom 26 original that I had stored on my SD card.
I wiped my Cache and Dalvike as required then wiped the system. As I went to instal the Alliance Rom for some reason I used reboot and the phone went to the Startup screen saying Galaxy 2 and stayed there. The power button had no effect and After waiting for 10 minutes I decided to take the battery out and do a Volume down Home button and power restart
The screen now has the big green android man on it in the left hand corner in RED is ODIN MODE
Product Name SCH 1605
Custom Binary Download Yes (1 counts)
CURRENT BINARY SAMSUNG OFFICIAL
System Status Official
Under Android Man it says Downloading Do not turn off Target !!
I have tried to turn the device off and it doesnt do anything
What can I do to get this going
Click to expand...
Click to collapse
I have solved this by just holding Volume button Up and Start Button it went into TWRP automatically
I now have a WIFI problem above and still a phone problem below
What a nice way to spend a Saturday!!!
Related
Hi
So I've had my Samsung SIII for just over 18 months, and it's all worked fine etc. I've never rooted it or anything.
But this morning it will not boot up. When I try to switch it on the start up sequence happens, but it gets stuck on the flashing Samsung splash screen. If I turn it off it just restarts and ends up back on that screen. The only way to stop it is to take the battery out.
I've tried starting it in recovery mode (power+home button+vol up), but the standing, open android just flashes and I end up with the android lay down with the red exclamation mark from there. It then loops between the two androids and the Samsung SIII start up logo screen. I have tried to press the volume buttons whilst on the red exclamation mark screen but cannot get to anywhere from it.
However, it will load the download mode (power+home button+ vol down) just fine.
I have looked all over but most people encountering anything similar have rooted their devices, which I have not.
Also, last week I lost all of my contacts which were stored on the device (I don't know why) but that might have something to do with it.
I don't particularly want to hard reset the phone and lose everything, but if it's the only solution I will do.
Thanks.
In download mode is the product number shown or a blank?
If it shows i9300 then you have a good chance of flashing either a full stock rom or a rescue firmware (see general forum) using odin. You will need to factory reset in recovery afterward, but your data is almost certainly unrecoverable.
If the product number is blank then you have partial SDS and require a new motherboard.
Sent from my GT-I9300 using Tapatalk
rachypoo said:
Hi
So I've had my Samsung SIII for just over 18 months, and it's all worked fine etc. I've never rooted it or anything.
But this morning it will not boot up. When I try to switch it on the start up sequence happens, but it gets stuck on the flashing Samsung splash screen. If I turn it off it just restarts and ends up back on that screen. The only way to stop it is to take the battery out.
I've tried starting it in recovery mode (power+home button+vol up), but the standing, open android just flashes and I end up with the android lay down with the red exclamation mark from there. It then loops between the two androids and the Samsung SIII start up logo screen. I have tried to press the volume buttons whilst on the red exclamation mark screen but cannot get to anywhere from it.
However, it will load the download mode (power+home button+ vol down) just fine.
I have looked all over but most people encountering anything similar have rooted their devices, which I have not.
Also, last week I lost all of my contacts which were stored on the device (I don't know why) but that might have something to do with it.
I don't particularly want to hard reset the phone and lose everything, but if it's the only solution I will do.
Thanks.
Click to expand...
Click to collapse
Do has boomboomer said above but as a last resort before flashing back to stock or a rescue firmware if you flash PhilZ recovery in download mode with odin.You then have a Aroma option in PhilZ recovery to browse and copy phone files so you may be able to recover some data pictures etc.
Please read PhilZ thread >> http://forum.xda-developers.com/showthread.php?t=2201860 << and the special features thread about Aroma file manager in post #3
Please note use as a last resort to get your data back! and read everything! Also all this is presuming you can get into PhilZ recovery after flashing..
I'm having the same problem , been looking through lots of topics. When I switch on the phone it's not booting android guy lays on his back. Download mode and Android Recovery are in my range.
I've been trying to flash stock-firmware from sammobile.com with ODIN but no effect , I mean It all went OK in Odin Operation list than fially phone reset and PASS. But this android guy is still laying on his back and making fun of me xD
Before trying to get back to stock ROM, I've had rooted phone and installed RR with 4.4.2 for S3, now I don't have a clue what shall I do next ...
Any ideas ? (the noob[me] have asked )
Stuck on samsung logo
Hi my s3 got stuck in the boot samsung logo.
It happend after I went to CWM app and created partition from there.
After I reboot it , then it froze down there.
S3-rooted running cyanogen mod 10.2
Teamdaiwa said:
Hi my s3 got stuck in the boot samsung logo.
It happend after I went to CWM app and created partition from there.
After I reboot it , then it froze down there.
S3-rooted running cyanogen mod 10.2
Click to expand...
Click to collapse
You buggered the partitions .
Remove partition .
SOLVED >>
I have solved my problem with this lying android guy on his back , after trying to get back stock. So the thing was on my phone there have been left the kernel from Resurection Remix , I have updated it to Custom Kernel from this topic
http://forum.xda-developers.com/showthread.php?t=2563562
And my newest version of stock firmware is swimming very nice I hope This will help someone
Hi,
I am using a SGS2 international version.
I had downloaded CM 11 and was fine with it. Then a notification pop-up saying incremental update, which I proceeded downloading. In the middle of upgrading the firmware (the android with the spinning hexagon in the middle), the phone froze, hexagon and the progress bar no longer moved. Then I proceeded to restart the phone by long press the on button. I noticed the phone does not move after the initial load screen with the SGS2 logo and the yellow warning sign. Did not even boot to the cynogenmod blue spinning logo.
I can press the power+home+up/down button and a menu comes out regarding downloading firmware. I have also managed to get into the CWM recovery menu v6.0.4.5 with the black top hat and the orange arrow. Also, if I press the three buttons, the odin mode comes out with the:
product name:
custom binary download: Yes (1 counts)
current binary: custom
It says downloading and do not turn off screen
Not sure what else to do. Battery charging while the phone is off is working. Is this phone bricked? Is there a way to recover it?
Just wipe your system and flash cm11 zip
So here is what happened.
I have a Samsung S3 i9300 with android jellybean (4.3). I wanted to play Pokemon GO real bad (damn me ! ) so I tried rooting my phone and upgrading it to 4.4.
I used the kingoroot from PC and successfully rooted my phone. Then i downloaded the TWRP manager app in my phone and went to install recovery (i have no idea what that is but i went as per instructions given on TWRP website), chose my device, the latest image available and then selected "install". It ran and then gave me a pop up that it is not successful because either the image is not for my device or my phone's "something" is locked (i don't exactly remember what it was.. but i searched and found out that Samsung galaxy S3 i9300 has "that" feature always unlocked). Then it gave me an option to "Reboot Now" and i chose that, which hanged my phone. I pressed the home button and it went to the home page and the phone was working OK besides the TWRP manager app which was stuck. So what I did was that I restart my phone using the power button. My phone restarted and then I got a black screen and the LED which indicates the charging status was blue (with changing shades), It got me worried so I took out the battery. When i put it again it was DEAD
I tried the soft reset, hard reset but no luck.
When i connect it to my PC it does give that connected sound but nothing else.
same thing i also ttied to play pokemon go
Tomorrow i will try to use a jig mayba that can help me to get in to download mode
shujahatali92 said:
So here is what happened.
I have a Samsung S3 i9300 with android jellybean (4.3). I wanted to play Pokemon GO real bad (damn me ! ) so I tried rooting my phone and upgrading it to 4.4.
I used the kingoroot from PC and successfully rooted my phone. Then i downloaded the TWRP manager app in my phone and went to install recovery (i have no idea what that is but i went as per instructions given on TWRP website), chose my device, the latest image available and then selected "install". It ran and then gave me a pop up that it is not successful because either the image is not for my device or my phone's "something" is locked (i don't exactly remember what it was.. but i searched and found out that Samsung galaxy S3 i9300 has "that" feature always unlocked). Then it gave me an option to "Reboot Now" and i chose that, which hanged my phone. I pressed the home button and it went to the home page and the phone was working OK besides the TWRP manager app which was stuck. So what I did was that I restart my phone using the power button. My phone restarted and then I got a black screen and the LED which indicates the charging status was blue (with changing shades), It got me worried so I took out the battery. When i put it again it was DEAD
I tried the soft reset, hard reset but no luck.
When i connect it to my PC it does give that connected sound but nothing else.
Click to expand...
Click to collapse
fer4282 said:
Tomorrow i will try to use a jig mayba that can help me to get in to download mode
Click to expand...
Click to collapse
Best of luck ! I hope you succeed.
Hello dear users of xda.
I have read alot of threads on several forums to find a fix for my broken phone, since I am hoping that the problem is caused by the software, rather than the hardware.
Sadly I was not able to find the fix yet and therefor you guys are my last shot at this issue. This account is also freshly registered, so I will not be able to post any links or images to help you guys out understanding what happened ... so please just bear with me here
Since I am from Germany I hope you can also excuse small mistakes regarding my writing in this thread. Thank you in advance
Lets dive right into this with a few details:
Samsung Galaxy S6 Edge (SM-G925F)
Never rooted, flashed -> always official updates
Android 7 was up to date
Phone has no branding or any kind of simlock
What happened:
My phone was turned off a few days ago when I woke up. Since I always charge it over night it couldnt be out of power and that confused me.
I then pressed the On/Off-Button to start it and the phone booted up.
But the boot did get stuck on the Samung logo-animation. I mean the animation which is usually displayed after the big "Samsung Galaxy S6 Edge powered by Android".
I waited a minute or something and nothing happened, it seemed like the boot froze up and I turned it off.
When I booted it up again the samsung animation would not even finish and then freeze up. The animation is displaying the letters from left to right and it froze this time displaying only "Samsu".
After that I plugged the phone back into the wall to charge and went to the PC to google this issue. The phone displayed around 25% battery when I plugged it in.
So apparently it was not charging this night?
Anyways ... after googling and not finding any similiar problems I tryed to boot with Safe Mode ( holding Volume Down + On/Off Button .... no success) and then downloaded Samsung Switch and all drivers needed to get a device connected to the PC.
I connected the phone to the PC with an original Samsung cable and Samsung Switch was not showing anything until I entered the Download Mode on my phone by pressing Volume Down + Home + On/Off.
Then Samsung Switch displayed that the connected device was not compatible (even though it meets all requirements).
I went to the device manager to make sure that the drivers are working and the phone indeed was showing up in the list. It also disappeared properly when I unplugged it from the PC.
After that I again tryed out to boot the phone several times. It would always freeze up anywhere within that Samsung animation.
Not knowing what to do I thought an factory reset might help out and I pressed Volume Up + Home + On/Off for several seconds when the phone was turned off.
Nothing happened. I could only boot up the phone by pressing the On/Off button alone and by doing that it always froze up. Just the Download-Mode was accessable (Volume Down + Home + On/Off).
Since I had no way to recover or reset anything by using Samsung Switch or the Recovery Mode I decided to flash an official Samsung rom on the device using ODIN.
I downloaded the following:
Odin ( v3.12.3 )
Firmware ( G925FXXU5EQK8_G925FDBT5EQK1_G925FXXU5EQKF_HOME.tar.md5 // from a german android forum, information below )
FIRMWARE INFORMATION
Model: SM-G925F
Model name: Galaxy S6 edge
Country: Germany (DBT)
Version: Android 7.0
Changelist: 10958180
Build date: Thu, 09 Nov 2017 10:08:50
Android security patch level: 2017-11-01
Product code: DBT
PDA: G925FXXU5EQK8
CSC: G925FDBT5EQK1
When I connected the phone Odin was recognizing the device and I was able to flash the firmware successfully. Odin did not display any kind of errors.
After the flash the phone was still connected to the PC since I feared it would run out of power. I know that the first boot after a flash can take a while. Since the LED was flashing while the big "Samsung Galaxy S6 Edge" logo was displayed I thought it was doing something in the background. I kept it like this (big logo, LED flashing, plugged into the PC) for over an hour and nothing did change. The device was warm but I doubted that it's doing anything since one hour for a boot, even after flashing, is way too long.
After that hour I turned it off and it instantly started to boot up again, but this time and all the other times after that it kept getting stuck at the big logo. It did not proceed into the animation like before.
I tested if I could enter the Recovery Mode at this point but it still was only able to get into the Download Mode.
The only way to stop it from trying to boot now was to get into that Download Mode, else it would just keep looping around, but not turn off by its own.
Every now and then, instead of displaying the big logo, it showed a blue screen with a yellow warning sign and the android mascot laying on the ground with "No command" beneath it. If you want to see how it looks you can google images "android 7.0 no command" and look for the full blue screen pictures.
Googling this blue screen with no command said that it can be easily fixed by wiping the data/cache from your device. But as I said the recovery mode was not showing up when I pressed the buttons for it. So a friend of mine suggested using ADB or fastboot to wipe the cache / dalvik cache.
Using both (ADB + fastboot) the device was not detected. We made sure that the drivers were installed properly. There was and there still is no way to connect to the phone with these both tools. Sadly.
After the first try of using ADB/fastboot we decided that the issue might have been the firmware I downloaded in the beginning and we used SamFirm (v0.3.6) to download the newest firmware for my SM-G925F ( G925FXXU5EQK8_G925FDBT5EQK1_G925FXXU5EQKF_HOME.tar.md5 )
This firmware appears to be the same as the one I downloaded before, but this one was slightly bigger.
This is a paste of the SamFirm window:
Checking firmware for SM-G925F/DBT/G925FXXU5EQK8/G925FDBT5EQK1/G925FXXU5EQKF/G925FXXU5EQK8
Model: SM-G925F
Version: G925FXXU5EQK8/G925FDBT5EQK1/G925FXXU5EQKF/G925FXXU5EQK8
OS: Nougat(Android 7.0)
Filename: SM-G925F_1_20171129140113_g7auy18e0c.zip.enc4
Size: 1950442496 bytes
LogicValue: 8ikzg48ul7hryauq
The flash was again successfull and still the same problem remained: no full boot.... sometimes a blue no command mascot.
After that we flashed again but with another PIT file attached. At first we got an error after the hidden.img but after changing the PIT file to this one ( ZEROLTE_EUR_OPEN_HIDDEN300M ) it worked again without any errors displayed by Odin. Apparently the PIT file we used at first did not have enough space for our hidden.img ...
We flashed that firmware several times and sometimes after the flash there would be a blue screen with an android mascot saying it is erasing, but the animation of that mascot freezes also after 10 to 20 seconds. I've kept the phone in this blue screen for several hours (up to 5h I think) since a few forum threads said that it sometimes takes very long to work and the LED was actually flashing all the time, but nothing changed.
We did not try to flash anything else because the Reactivation Lock is enabled and I have no idea how to turn this thing off w/o booting the device.
I would not mind flashing a custom firmware on the device as long as it just works again. So if this is somehow possible and might be a solution I am up for it.
What currenctly is going on with the phone:
· It only turns completly off when the power runs out.
· No button combination is working to turn it off.
· I can enter Download Mode easily but I can not enter the Factory Reset Mode.
Within the Download Mode it says:
ODIN MODE
Product Name: SM-G925F
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: On
Secure Download: Enabled
KNOX Warranty Void: 0 (0x0000)
RP SWREV: B:5 K:2 S:2
· The boot ends either up with showing an "Samsung Galaxy S6 Edge powered by Android" logo for the whole time (kept it like that for several hours, no boot)
· or with a blue screen (yellow warning sign, android mascot laying on the ground and a "no command" beneath it).
· Odin is recognizing it as a device.
· The device manager is recognizing the device.
· Samsung Switch is saying the device is not compatible.
· ADB/fastboot can not detect the device.
So ... is it possible to get this damn thing to work again or is it gone for good?
If you still got any questions regarding the current state of the phone please ask. I will try to reply ASAP.
Thank you very much for any reply you guys might throw at me.
It sounds like a hardware fault and your phone is kaput.
Interesting.I would love to open the phone to inspect it
FaKeT said:
Hello dear users of xda.
I have read alot of threads on several forums to find a fix for my broken phone, since I am hoping that the problem is caused by the software, rather than the hardware.
Sadly I was not able to find the fix yet and therefor you guys are my last shot at this issue. This account is also freshly registered, so I will not be able to post any links or images to help you guys out understanding what happened ... so please just bear with me here
Since I am from Germany I hope you can also excuse small mistakes regarding my writing in this thread. Thank you in advance
Lets dive right into this with a few details:
Samsung Galaxy S6 Edge (SM-G925F)
Never rooted, flashed -> always official updates
Android 7 was up to date
Phone has no branding or any kind of simlock
What happened:
My phone was turned off a few days ago when I woke up. Since I always charge it over night it couldnt be out of power and that confused me.
I then pressed the On/Off-Button to start it and the phone booted up.
But the boot did get stuck on the Samung logo-animation. I mean the animation which is usually displayed after the big "Samsung Galaxy S6 Edge powered by Android".
I waited a minute or something and nothing happened, it seemed like the boot froze up and I turned it off.
When I booted it up again the samsung animation would not even finish and then freeze up. The animation is displaying the letters from left to right and it froze this time displaying only "Samsu".
After that I plugged the phone back into the wall to charge and went to the PC to google this issue. The phone displayed around 25% battery when I plugged it in.
So apparently it was not charging this night?
Anyways ... after googling and not finding any similiar problems I tryed to boot with Safe Mode ( holding Volume Down + On/Off Button .... no success) and then downloaded Samsung Switch and all drivers needed to get a device connected to the PC.
I connected the phone to the PC with an original Samsung cable and Samsung Switch was not showing anything until I entered the Download Mode on my phone by pressing Volume Down + Home + On/Off.
Then Samsung Switch displayed that the connected device was not compatible (even though it meets all requirements).
I went to the device manager to make sure that the drivers are working and the phone indeed was showing up in the list. It also disappeared properly when I unplugged it from the PC.
After that I again tryed out to boot the phone several times. It would always freeze up anywhere within that Samsung animation.
Not knowing what to do I thought an factory reset might help out and I pressed Volume Up + Home + On/Off for several seconds when the phone was turned off.
Nothing happened. I could only boot up the phone by pressing the On/Off button alone and by doing that it always froze up. Just the Download-Mode was accessable (Volume Down + Home + On/Off).
Since I had no way to recover or reset anything by using Samsung Switch or the Recovery Mode I decided to flash an official Samsung rom on the device using ODIN.
I downloaded the following:
Odin ( v3.12.3 )
Firmware ( G925FXXU5EQK8_G925FDBT5EQK1_G925FXXU5EQKF_HOME.tar.md5 // from a german android forum, information below )
FIRMWARE INFORMATION
Model: SM-G925F
Model name: Galaxy S6 edge
Country: Germany (DBT)
Version: Android 7.0
Changelist: 10958180
Build date: Thu, 09 Nov 2017 10:08:50
Android security patch level: 2017-11-01
Product code: DBT
PDA: G925FXXU5EQK8
CSC: G925FDBT5EQK1
When I connected the phone Odin was recognizing the device and I was able to flash the firmware successfully. Odin did not display any kind of errors.
After the flash the phone was still connected to the PC since I feared it would run out of power. I know that the first boot after a flash can take a while. Since the LED was flashing while the big "Samsung Galaxy S6 Edge" logo was displayed I thought it was doing something in the background. I kept it like this (big logo, LED flashing, plugged into the PC) for over an hour and nothing did change. The device was warm but I doubted that it's doing anything since one hour for a boot, even after flashing, is way too long.
After that hour I turned it off and it instantly started to boot up again, but this time and all the other times after that it kept getting stuck at the big logo. It did not proceed into the animation like before.
I tested if I could enter the Recovery Mode at this point but it still was only able to get into the Download Mode.
The only way to stop it from trying to boot now was to get into that Download Mode, else it would just keep looping around, but not turn off by its own.
Every now and then, instead of displaying the big logo, it showed a blue screen with a yellow warning sign and the android mascot laying on the ground with "No command" beneath it. If you want to see how it looks you can google images "android 7.0 no command" and look for the full blue screen pictures.
Googling this blue screen with no command said that it can be easily fixed by wiping the data/cache from your device. But as I said the recovery mode was not showing up when I pressed the buttons for it. So a friend of mine suggested using ADB or fastboot to wipe the cache / dalvik cache.
Using both (ADB + fastboot) the device was not detected. We made sure that the drivers were installed properly. There was and there still is no way to connect to the phone with these both tools. Sadly.
After the first try of using ADB/fastboot we decided that the issue might have been the firmware I downloaded in the beginning and we used SamFirm (v0.3.6) to download the newest firmware for my SM-G925F ( G925FXXU5EQK8_G925FDBT5EQK1_G925FXXU5EQKF_HOME.tar.md5 )
This firmware appears to be the same as the one I downloaded before, but this one was slightly bigger.
This is a paste of the SamFirm window:
Checking firmware for SM-G925F/DBT/G925FXXU5EQK8/G925FDBT5EQK1/G925FXXU5EQKF/G925FXXU5EQK8
Model: SM-G925F
Version: G925FXXU5EQK8/G925FDBT5EQK1/G925FXXU5EQKF/G925FXXU5EQK8
OS: Nougat(Android 7.0)
Filename: SM-G925F_1_20171129140113_g7auy18e0c.zip.enc4
Size: 1950442496 bytes
LogicValue: 8ikzg48ul7hryauq
The flash was again successfull and still the same problem remained: no full boot.... sometimes a blue no command mascot.
After that we flashed again but with another PIT file attached. At first we got an error after the hidden.img but after changing the PIT file to this one ( ZEROLTE_EUR_OPEN_HIDDEN300M ) it worked again without any errors displayed by Odin. Apparently the PIT file we used at first did not have enough space for our hidden.img ...
We flashed that firmware several times and sometimes after the flash there would be a blue screen with an android mascot saying it is erasing, but the animation of that mascot freezes also after 10 to 20 seconds. I've kept the phone in this blue screen for several hours (up to 5h I think) since a few forum threads said that it sometimes takes very long to work and the LED was actually flashing all the time, but nothing changed.
We did not try to flash anything else because the Reactivation Lock is enabled and I have no idea how to turn this thing off w/o booting the device.
I would not mind flashing a custom firmware on the device as long as it just works again. So if this is somehow possible and might be a solution I am up for it.
What currenctly is going on with the phone:
· It only turns completly off when the power runs out.
· No button combination is working to turn it off.
· I can enter Download Mode easily but I can not enter the Factory Reset Mode.
Within the Download Mode it says:
ODIN MODE
Product Name: SM-G925F
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: On
Secure Download: Enabled
KNOX Warranty Void: 0 (0x0000)
RP SWREV: B:5 K:2 S:2
· The boot ends either up with showing an "Samsung Galaxy S6 Edge powered by Android" logo for the whole time (kept it like that for several hours, no boot)
· or with a blue screen (yellow warning sign, android mascot laying on the ground and a "no command" beneath it).
· Odin is recognizing it as a device.
· The device manager is recognizing the device.
· Samsung Switch is saying the device is not compatible.
· ADB/fastboot can not detect the device.
So ... is it possible to get this damn thing to work again or is it gone for good?
If you still got any questions regarding the current state of the phone please ask. I will try to reply ASAP.
Thank you very much for any reply you guys might throw at me.
Click to expand...
Click to collapse
If your not bothered about tripping knox (0x1) and voiding your warranty you can flash twrp recovery. Then wipe from there or flash a custom ROM. This way we can know for sure if it's software or hardware issue.
callumbr1 said:
If your not bothered about tripping knox (0x1) and voiding your warranty you can flash twrp recovery. Then wipe from there or flash a custom ROM. This way we can know for sure if it's software or hardware issue.
Click to expand...
Click to collapse
Thanks for that reply.
Sadly I can not flash twrp recovery because of that Reactivation Lock ... and I do not know how to deactivate it at the current state of the phone
Is there a way to workaround that lock?
same here lol. but even twrp recovery cannot run LOl, sammy charged me as U$$ 700 to repair,
of course i did not let them repair, and now i have a dead phone, that only goes to download mode, and the bootlogo with glitches
What if you get a stock ROM and flash it via Odin, if your phone goes to Download Mode...? I didnt totally understand your situation but that came to my mind, flashing stock firmware via Odin.
EDIT: Just went through your SITUATION a bit, you should get it inspected by someone and then decide, otherwise you might lose your phone permanently.
Same here
Same here.... But with s6....
Only download mode. Not even a bootlogo. No recovery... Tried flashing literally everything. is it possible to flash a custom Rom with Odin? Convert a rom.zip t a tar file? I tried flashing cf-root but I don't know if it's rooted...
Hey guys,
I got a Galaxy Note 4 on Telus (Canadian), and my phone was in a bootloop so I decided to flash stock ROM with ODIN. Here's what I know:
It has never been rooted
Reactivation lock is on
There are no other modifications that I know of
Model number: SM-N910W8
Known issues: My phone would randomly shut off (straight reboot, doesn't go to logo) when I used Snapchat after around 5-6 seconds. This would also happen rarely when I used my camera, but other than that it would never happen.
Notes on what I've tried:
Getting latest ODIN version
Updating Samsung drivers
I made sure that I had the correct ROM
When I flash in ODIN, it gives me a pass
Phone reboots, and it says recovery booting in top left corner with Samsung logo
It says installing system update, and it shows a progress bar
It's slow and steady progression until about a quarter of the way through, where it jumps and then promptly says "Erasing..." and then reboots
After it reboots, it still says recovery mode and it goes back to saying installing system update but this time without a progress bar
It stays on this screen for a short period of time then reboots and does the same thing > recovery booting > system update
I would just like to know why I fail to flash a ROM that works properly. Am I doing something wrong?
Does this occur because you have reactivation lock on?
HippoInWindow said:
Does this occur because you have reactivation lock on?
Click to expand...
Click to collapse
Is there a way to turn it off then, outside of the settings menu?