[Q] nand partition not mounted - Android Q&A, Help & Troubleshooting

Hey everyone
A have an A31 series tablet with 16 GB storage.
It has 1 GB internal storage( where apps are installed) an about 11 GB internal SD card storage.
It seemed that the internal storage was too low for me so I tried to partition nand as I was going to have 3 GB of internal memory.
When I finished partitioning and rebooted my device I realized that I didn't change any partition, but system couldn't recognize my 11 GB internal SD memory.
I know that allwiner tablets have problems with mounting partitions( i found out after a few days of googling).
Now here's the big deal: is it possible to do it by merging the nand kernel source and how do I do it or there's ather way?
My device can boot with no problems and I'm rooted.
Thanks
I'm looking forward for your replies.

Related

[Q] Internal Memory , S2E, sd-ext

I updated my ZTE Blade to CM Nightly build yesterday. Before, I partitioned my memory card (sd-ext) to store all apps in it. Before I updated the ROM, my internal memory was 1 GB (i assumed that the partition acts as internal)
Now after updating the ROM, I again try to partition and use S2E to make the partition as internal memory. But my internal memory still shows 150MB.
How could I make my internal memory 1GB?

[Q] remapping storage space

I do have a china GT-i9300 phone with ICS 4.0.4.
It has 512MB internal storage, 2GB SD internally, and I have a 32 GB external sdcard, by default mounted as sdcard2.
Now I did root it, installed a cwm recovery and flashed a rom labeled 4.1.9. (Still ICS 4.0.4)
Installing this rom does some changes to the storage space that I find useful.
It remaps the internal 2GB sdcard into phone storage, and my 32GB external card is mounted as sdcard. And my internal 512MB storage is now monted as sdcard2.
This is all good, but can anyone tell me ho this is done?
Can I do the same on any other android phone?

[Q] out of memory - internal card

Hi all,
i have some question
today i got a message "Storage Space Running Out"
i have internal card with 12 gb, and external card with 8 gb
one solution that i found is to partition the internal card, install link2sd app and link all the apps to the partition that i made
so, this what i did.
after i did that, i increased the memory but still not much i have now 350 mb free
first question is why it happens? i had this problem few times, what can i do to solve this problem?
second, after partition internal card i cant see external card no in the device and no in the computer
thank you!

[Q] [HELP] Internal SD won't mount in ROM Port (PICS inside)

First thanks for taking the time to help me out..
Okay, so i have a been trying to port Huawei's EMUI 3.0 4.4.2 Kitkat, the Jiayu G4S and so far everything else works great except I can't seem to mount my internal sd anymore... The Jiayu G4S comes with an internal memory of 16gb of which 4gb is used for apps and 9.6gb is used as the internal sd. So far the ROM appears to have used the 4gb as its internal sd+internal memory for apps and the 9.6gb partition is no where to be seen
In CWM recovery mode, mounting usbstorage/ mounts the 9.6gb with no option to mount the other partition...
I've tried editing the framework-res.apk storage_list.xml to match stock rom but didn't work..Any way, below are pics of the partition table? as it currently stands..
the 9.6gb is the one am trying to mount:
port's storage-list.xml
stock storage-list.xml
opening sdcard1 shows a blank page and emulated shows two folders
1. folder '0' (opens the 4gb partition)
2. folder 'legacy'( still opens the 4gb partition)
mmcblk07 is currently serving as the sdcard0...internal storage and internal sd. Another thing to note is that while the 4gb partition is ext4, the 9.6 one is fat32.
So what am i trying to achieve, to set the 9.6gb partition ( mmblk0p8) as my default Internal SD and the mmblk0p7 as the internal storage for apps and nothing else..just like in the KitKat stock rom.
All help is greatly appreciated..Thanks..
bump?
anyone?
SOLVED IT!!!
okay so after a really steep learning curve i managed to do it by replacing everything in my ported boot.img's init.ssd with that of the stock's init.no_ssd.rc
Mod can safely close this thread...

Internal Card - USB storage partition got disappered

Hi
I have got a problem that my USB storage partition is not visible or functionally not available in the Internal Memory after I increased the internal memory. I used a PIT file of 8GB and now the phone displays that 8GB only as the device storage.
After expanded my device storage I have upgraded the phone with Cyanogenmod 12.1 and now my Androd version is 5.1.1 ( But I don't think this upgrade is the reason why I got this issue, because I have done this update earlier also without any issues). Its ok that I can still go ahead with the current storage configuration in my phone but the problem is when using apps like Whatsapp and all. Those applications require access desperately to internal Memory(USB storage partition).
Looking forward experts help and suggestions on this. Appreciate your help.
Regards,
I'm not an expert, but have you tried to wipe all partitions in recovery after the repartition?

Categories

Resources