I have a Galaxy Note 2 which was bought in Thailand and I tried to root. The root didn't work because of Knox and none of the solutions given worked, so I decided to flash it back to normal using Odin 3.09 with a rom I found on stockroms(dot) net, now the flash worked, but my phone is on 4.1.1 and I get the error that it can't be updated because it's been modified AND my sim card doesn't work, all I get is "not registered on network" or "network not available", where do I go from here? How do I get the phone back to normal working 4.3 or 4.4 again?
Aviadarts said:
I have a Galaxy Note 2 which was bought in Thailand and I tried to root. The root didn't work because of Knox and none of the solutions given worked, so I decided to flash it back to normal using Odin 3.09 with a rom I found on stockroms(dot) net, now the flash worked, but my phone is on 4.1.1 and I get the error that it can't be updated because it's been modified AND my sim card doesn't work, all I get is "not registered on network" or "network not available", where do I go from here? How do I get the phone back to normal working 4.3 or 4.4 again?
Click to expand...
Click to collapse
Why did you go back to 4.1.1?? Downgrading if on 4.3 or above is not recommended. All you have to do is Odin an updated firmware for your region to fix.
es0tericcha0s said:
Why did you go back to 4.1.1?? Downgrading if on 4.3 or above is not recommended. All you have to do is Odin an updated firmware for your region to fix.
Click to expand...
Click to collapse
I didn't do that on purpose, the stock firmware I found on stockroms just happened to be 4.1.1 and I only found that out once I had flashed it, if you can find the stock 4.3 for Thailand for me that would be great, but I have not found it.
http://www.ibtimes.co.uk/n7100xxuen...re-released-galaxy-note-2-how-install-1438467
As far as rooting, pretty sure you just need to install a custom recovery and install the SuperSU zip from Chainfire or there might be an auto root option from Chainfire that you just flash via Odin. Once SuperSU is installed then open the app and it will ask you if you want to try to disable Knox. Also recommend SELinuxmode changer app to set system to partition which will allow stuff like Xposed to work right.
Flashed with 4.3 I found on a forum post here and it works! Thank you! I have yet to see whether it can update though, says it can't connect to the server and tells me to use Kies so I will try that
Related
Hi,
i bought a Samsung Galaxy S3 GT-I9300 about two months ago, it's a Spanish device. I think the device came with 4.0.1 update of ICS, some weeks after buying it got 4.0.4 update and then using CF-Root 6.4 and Odin 1.85 managed to get root access so i was able to install busybox and UMS application from xda forums. So everything was working fine. Then, about 3 days ago i got an update notification which showed me a message which said "Updates will be provided in the request order preference" or something like this, i tried to update a few times more but no luck, i always got the same messages so i thought i had to wait for 4.1 update to get published but anyway everything was working fine.
The curious thing is yesterday ( August 25, 2012), when i woke up i noticed a firmware update was ready to be installed so went through it (without uninstalling CF-Root 6.4, supersu, etc.) but the strange thing was, after the update completed fine, went to settings to check the version and i saw it still/again was 4.0.4 version of ICS. Also noticed Google Play Books and Google Play Movies got installed so on one hand it seemed everything went fine cause new apps were there and everything worked as expected but on the other hand i think i already had 4.0.4 update installed on the device. Till that point one can think i got confused on the versions i got installed before the update and no major problem here. After that, as i already had root access on the device, i went to check if i still could run UMS app but it complained about missing root access so as i did before that last Android update took CF-Root 6.4 and Odin 1.85 to flash the device and get root access again (Without removing any previous install of CF-Root, super su, busybox, etc. ) but had no luck, so now it's not possible for me get root access again but i'm also still wondering how is it possible that today's update left the phone with the same Android version as before the update.
The only explanation i can find is the phone came with 4.0 version, first update got me to 4.0.1 and today's update guided me to the 4.0.4 but i'm still wondering why root access is not working as it should.
So my questions are, did i got confused about each version update? Then why can't i get root access again just repeating the same first process?
When opening busybox i can read "Not Enough Free Space in /system". Opening /system directory with Root Explorer i can read 1.05GB used, 436.39MB free. Is it right /system directory takes up to 1GB of the space? Why Busybox thinks there is 0.0MB free there?
Hope someone can help. Thanks in advanced!
Thousands of posts say OTA updates may fail if the phone is rooted .
Usual is to fail part way through an update ..
Suggest wipe the phone flash stock rom with Odin then root .
jje
JJEgan said:
Thousands of posts say OTA updates may fail if the phone is rooted .
Usual is to fail part way through an update ..
Suggest wipe the phone flash stock rom with Odin then root .
jje
Click to expand...
Click to collapse
Thanks a lot for the info. Am i going to loose installed apps, system settings, etc when doing the suggested process? Do i really need to wipe the phone before flashing the phone? I suppose i can find stock rom for my model here in the forums. Thanks!!
Hi,
i'm looking for a stock firmware for my SGS3 BaseBand I9300XXLH1 but i'm not able to find it. I think the firmware which came with my phone is unbranded and from Spain. But the question which i'm wondering is, do i really need to flash the phone? Isn't possible to solve the issue in another manner? After updating through OTA the rooted device, what's supposed to went wrong?
Lastly, what's wrong on updating a stock rooted firmware using Phone/Android update system? Don't understand how doing that can break the phone forcing me to wipe data and flash the phone.
Hope someone can help. Thanks a lot!
PD: After rebooting the phone in recovery mode i can see stock recovery has been installed with last update. Hope someone can make a bit of sense about it all. Thanks in advanced.
sibok said:
Hi,
i'm looking for a stock firmware for my SGS3 BaseBand I9300XXLH1 but i'm not able to find it. I think the firmware which came with my phone is unbranded and from Spain. But the question which i'm wondering is, do i really need to flash the phone? Isn't possible to solve the issue in another manner? After updating through OTA the rooted device, what's supposed to went wrong?
Lastly, what's wrong on updating a stock rooted firmware using Phone/Android update system? Don't understand how doing that can break the phone forcing me to wipe data and flash the phone.
Hope someone can help. Thanks a lot!
PD: After rebooting the phone in recovery mode i can see stock recovery has been installed with last update. Hope someone can make a bit of sense about it all. Thanks in advanced.
Click to expand...
Click to collapse
Get your firmware from here http://www.samfirmware.com/
then use odin to flash it, I had the same problem
Baseband is modem not firmware.
jje
Sent from my GT-I9300 using xda premium
Thanks to both for your answers. Maybe it's stupid but i'm some what more peaceful knowing other people also happened the same issue although it still feels very weird. All i did is flashing with CF-Root 6.4.
I've been looking for the stock firmware which is supposed to came with my phone at sammobile site but i'm not able to find it, although at that point ( where the phone got the same update twice, 4.0.4 ) i don't think i can trust the information provided by the phone. Under phone settings i can see Model Number is GT-l9300 and Base Band Version is i9300XXLH1 but i can't find it no sammobile site. What i find at sammobile site is I9300XXBLH1 ( notice B letter ) but i think that before this weird behaviour happened the phone showed Base Band Version I9300XXBLFB.
Is it all possible or the weird one is me?
Kickasskev, did you got 4.0.4 update twice?
Thanks again to all!
REPEAT BASEBAND IS NOT FIRMWARE nor is it firmware version .
To locate firmware try CHECKFUS .
Or stock providers roms from the sticky on XDA .
jje
sibok said:
Hi,
i bought a Samsung Galaxy S3 GT-I9300 about two months ago, it's a Spanish device. I think the device came with 4.0.1 update of ICS, some weeks after buying it got 4.0.4 update and then using CF-Root 6.4 and Odin 1.85 managed to get root access so i was able to install busybox and UMS application from xda forums. So everything was working fine. Then, about 3 days ago i got an update notification which showed me a message which said "Updates will be provided in the request order preference" or something like this, i tried to update a few times more but no luck, i always got the same messages so i thought i had to wait for 4.1 update to get published but anyway everything was working fine.
The curious thing is yesterday ( August 25, 2012), when i woke up i noticed a firmware update was ready to be installed so went through it (without uninstalling CF-Root 6.4, supersu, etc.) but the strange thing was, after the update completed fine, went to settings to check the version and i saw it still/again was 4.0.4 version of ICS. Also noticed Google Play Books and Google Play Movies got installed so on one hand it seemed everything went fine cause new apps were there and everything worked as expected but on the other hand i think i already had 4.0.4 update installed on the device. Till that point one can think i got confused on the versions i got installed before the update and no major problem here. After that, as i already had root access on the device, i went to check if i still could run UMS app but it complained about missing root access so as i did before that last Android update took CF-Root 6.4 and Odin 1.85 to flash the device and get root access again (Without removing any previous install of CF-Root, super su, busybox, etc. ) but had no luck, so now it's not possible for me get root access again but i'm also still wondering how is it possible that today's update left the phone with the same Android version as before the update.
The only explanation i can find is the phone came with 4.0 version, first update got me to 4.0.1 and today's update guided me to the 4.0.4 but i'm still wondering why root access is not working as it should.
So my questions are, did i got confused about each version update? Then why can't i get root access again just repeating the same first process?
When opening busybox i can read "Not Enough Free Space in /system". Opening /system directory with Root Explorer i can read 1.05GB used, 436.39MB free. Is it right /system directory takes up to 1GB of the space? Why Busybox thinks there is 0.0MB free there?
Hope someone can help. Thanks in advanced!
Click to expand...
Click to collapse
0. Remove all root apps from your phone.
1. Back up your rooted rom in cWM.
2. Use triangle away to get rid of the traingle.
3. Format system and cache.
4. Flash an official rom.
5. You should have all your apps + settings on a stock rom without the status being 'modified'.
victorator said:
0. Remove all root apps from your phone.
1. Back up your rooted rom in cWM.
2. Use triangle away to get rid of the traingle.
3. Format system and cache.
4. Flash an official rom.
5. You should have all your apps + settings on a stock rom without the status being 'modified'.
Click to expand...
Click to collapse
I've used checkfus and now i know my firmware.
Thanks for the step by step tips, but my phone is not rooted so i cannot use cwm, triangleapp and so. I. Annot also remove cwm manager nor supersu. I suppose i'll have to flash stock firmware first of all. Am i right?
Pretty strange, first time i rooted the device through cf-root6.4 it run flawlessly, but now i had to remove the battery after flashing ( while device was on ) and enter into recovery mode by hand which started the rooting process.
Thanks!
I'm seeing an available firmware upgrade via kies (MK7).
I'm a little skeptical to try it. Has anyone else upgraded to this firmware?
If so, have you been able to root your mega and install a custom recovery after the upgrade?
I don't want to install this firmware upgrade only to find out that afterwards that knox is on it and prevents me from rooting the phone or unlocking the bootloader.
By the way, I tried downloading the firmware without my phone connected but kies keeps force closing on me before the download is complete.
I'm afraid to connect my phone and try the download because I think it will automatically install the upgrade which I don't want to do until I'm sure I can re-root it and re-install TWRP.
Sent from my SGH-M819N using xda app-developers app
Installed Update, Re-rooted, re-installed TWRP
curgervending said:
I'm seeing an available firmware upgrade via kies (MK7).
I'm a little skeptical to try it. Has anyone else upgraded to this firmware?
If so, have you been able to root your mega and install a custom recovery after the upgrade?
I don't want to install this firmware upgrade only to find out that afterwards that knox is on it and prevents me from rooting the phone or unlocking the bootloader.
By the way, I tried downloading the firmware without my phone connected but kies keeps force closing on me before the download is complete.
I'm afraid to connect my phone and try the download because I think it will automatically install the upgrade which I don't want to do until I'm sure I can re-root it and re-install TWRP.
Sent from my SGH-M819N using xda app-developers app
Click to expand...
Click to collapse
I bit the bullet and gave it a shot. I am happy to report that the firmware upgrade was successful using Kies, I was able to root the device via the Kingo Root app, and was able to re-install TWRP. I am now on firmware M819NUVUAMK7. It is still Android version 4.2.2, and the baseband is also M819NUVUAMK7. The kernel version is dated Fri Nov 22, 2013
I installed superSU and when I ran it, it asked me if I wanted to disable knox (YES OR NO). OF COURSE I DISABLED KNOX!!
I afterward performed a nandroid backup in TWRP (the first order of business).
I am more comfortable now deleting, freezing, uninstalling system apps now because (in the event of a softbrick or bootloop) I can always revert to my nandroid backup or in extreme cases, restart all over again by re-installing the firmware via Kies, re-rooting the device via the kingo root app, and reinstalling TWRP via ODIN.
Not sure what changed from the original firmware (no change log). In any event, the device is snappy and I'm not experiencing any lags.
curgervending said:
I bit the bullet and gave it a shot. I am happy to report that the firmware upgrade was successful using Kies, I was able to root the device via the Kingo Root app, and was able to re-install TWRP. I am now on firmware M819NUVUAMK7. It is still Android version 4.2.2, and the baseband is also M819NUVUAMK7. The kernel version is dated Fri Nov 22, 2013
I installed superSU and when I ran it, it asked me if I wanted to disable knox (YES OR NO). OF COURSE I DISABLED KNOX!!
I afterward performed a nandroid backup in TWRP (the first order of business).
I am more comfortable now deleting, freezing, uninstalling system apps now because (in the event of a softbrick or bootloop) I can always revert to my nandroid backup or in extreme cases, restart all over again by re-installing the firmware via Kies, re-rooting the device via the kingo root app, and reinstalling TWRP via ODIN.
Not sure what changed from the original firmware (no change log). In any event, the device is snappy and I'm not experiencing any lags.
Click to expand...
Click to collapse
never mind I got it. I had a brain fart and was doing the process back words. I put it in download mode for the root.
hotspot mod
I am rooted with stock rom just looking for a hotspot mod for my sgh m819n been searching and searching
reesemtk60 said:
I am rooted with stock rom just looking for a hotspot mod for my sgh m819n been searching and searching
Click to expand...
Click to collapse
as far as i know. there isn't a mod for Metro's phone. there are a few custom ROM's you can use that have free tethering built in. This one is the closest to stock. http://forum.xda-developers.com/showthread.php?t=2608110
It works fine on my M819N :good:
Deodex or odex
thanks one more question how can i tell if my phone is deodex or odex
reesemtk60 said:
thanks one more question how can i tell if my phone is deodex or odex
Click to expand...
Click to collapse
well easiest way is. if its your stock ROM that came with the phone when you bought it. it is odex.
if you are rooted, you can use root explorer to go into your system/app file and see if it shows odex settings for apps
I did and had no problem rooting with kingo. What I cannot find is a way around sim lock without going through metro and that sucks.
curgervending said:
I'm seeing an available firmware upgrade via kies (MK7).
I'm a little skeptical to try it. Has anyone else upgraded to this firmware?
If so, have you been able to root your mega and install a custom recovery after the upgrade?
I don't want to install this firmware upgrade only to find out that afterwards that knox is on it and prevents me from rooting the phone or unlocking the bootloader.
By the way, I tried downloading the firmware without my phone connected but kies keeps force closing on me before the download is complete.
I'm afraid to connect my phone and try the download because I think it will automatically install the upgrade which I don't want to do until I'm sure I can re-root it and re-install TWRP.
Sent from my SGH-M819N using xda app-developers app
Click to expand...
Click to collapse
bnb25 said:
as far as i know. there isn't a mod for Metro's phone. there are a few custom ROM's you can use that have free tethering built in. This one is the closest to stock. http://forum.xda-developers.com/showthread.php?t=2608110
It works fine on my M819N :good:
Click to expand...
Click to collapse
is that rom odex of deodex because my is odex
reesemtk60 said:
is that rom odex of deodex because my is odex
Click to expand...
Click to collapse
deodex
curgervending said:
I bit the bullet and gave it a shot. I am happy to report that the firmware upgrade was successful using Kies, I was able to root the device via the Kingo Root app, and was able to re-install TWRP. I am now on firmware M819NUVUAMK7. It is still Android version 4.2.2, and the baseband is also M819NUVUAMK7. The kernel version is dated Fri Nov 22, 2013
I installed superSU and when I ran it, it asked me if I wanted to disable knox (YES OR NO). OF COURSE I DISABLED KNOX!!
I afterward performed a nandroid backup in TWRP (the first order of business).
I am more comfortable now deleting, freezing, uninstalling system apps now because (in the event of a softbrick or bootloop) I can always revert to my nandroid backup or in extreme cases, restart all over again by re-installing the firmware via Kies, re-rooting the device via the kingo root app, and reinstalling TWRP via ODIN.
Not sure what changed from the original firmware (no change log). In any event, the device is snappy and I'm not experiencing any lags.
Click to expand...
Click to collapse
Almost had a heart attack from this upgrade. My phone was already rooted when I applied the update from Kies. Everything went through fine except when it restarted, I couldn't turn on Wifi at all and I was getting an E in the cell signal. I managed to download the TWRP tar file and Kingo app to root again. I was able to restore my previous backed up image and everything was when I last left it! WHEW!
That's strange. I had no problem. wifi worked and I haven't seen E at all (only 4g lte or 4g). My signal appears to be stronger and more stable with this update than with the original firmware (most of the time I have full bars). As mentioned I don't know what changes were made (no change log around) but this is my observation so far.
Sent from my SGH-M819N using xda app-developers app
Can somebody running MK7 please boot into download mode quickly to check whether this update has a new Knox bootloader?
(Vol - , Home, Power)
Need to know if the following strings are present or not:
KNOX KERNEL LOCK:
KNOX WARRANTY VOID:
BOOTLOADER RP SWREV:
Thanks in advance.
[QUOT1.0razykipa;50763526]Can somebody running MK7 please boot into download mode quickly to check whether this update has a new Knox bootloader?
(Vol - , Home, Power)
Need to know if the following strings are present or not:
KNOX KERNEL LOCK:
KNOX WARRANTY VOID:
BOOTLOADER RP SWREV:
Thanks in advance.[/QUOTE]
This string is present on my phone in download mode:
BOOTLOADER RP SWREV: 3
I have no lines displaying anything about KNOX.
In titanium backup I froze knox 1.0, knox notification manager 1.0, and knox store 1.0.
So it appears that knox is in the rom somewhere but it's had no impact on me. I'm rooted, have twrp installed and have flashed multiple custom roms on my device (both tw and aosp based roms).
Perfect, thanks! Glad you guys got spared from the horrid new Knox bootloaders. There's a small chance that the M819 can be downgraded to the older bootloader to remove Knox entirely, but if the update came with the newest bootloader (I got stuck with it on my i527M) there is no hope at all of downgrading.
Thanks to whoever posted this and the creator of this rom
bnb25 said:
as far as i know. there isn't a mod for Metro's phone. there are a few custom ROM's you can use that have free tethering built in. This one is the closest to stock. http://forum.xda-developers.com/showthread.php?t=2608110
It works fine on my M819N :good:
Click to expand...
Click to collapse
I have the sgh-m819n metro pcs model running the mk7 firmware. This was the only rom that worked 100% for me. Im running twrp recovery,super user and free hotspot. Not to mention all the extra cool apps that it comes with. Big props to the developers of this software may your days be blessed with many more hacks.
Must be unrooted to perform update thru kies without errors..
Galaxy Mega 6.3 On Liquidsmooth rom posted this
question to everyone....
ok not sure if am in the right area to post this but. I have a metro galaxy mega 6.3 (sgh m819n) successfully rooted with kingo. what im trying to find is how to put a custom recovery like twrp and how to do it like step by step. help would be greatly appreciated. or to point me in the right direction. thanks guys.
http://forum.xda-developers.com/showthread.php?t=2608110 this is a great rom for our mega(metropcs) imho. now in order to install CWM or TWRP you simply need to download the version thats for meliusltexx which is for the i9205 version of the mega.. These Roms and procedures are compatable with the M819n(metropcs) mega
thanksss
[email protected] said:
http://forum.xda-developers.com/showthread.php?t=2608110 this is a great rom for our mega(metropcs) imho. now in order to install CWM or TWRP you simply need to download the version thats for meliusltexx which is for the i9205 version of the mega.. These Roms and procedures are compatable with the M819n(metropcs) mega
Click to expand...
Click to collapse
ok thanks and this will work correct.... also before I add a new rom on the m819n I have another question... I used to get 4LTE every where and now I get only 4G or edge after rooting with stock rom. signal apps dont do crap. is there a way to fix this... I miss my LTE data speeds. if you know how to fix or anything please point me in the right direction thanks.
About a month ago I rooted my Samsung Galaxy Grand(the single sim version) with the help of Klingo Root, worked like a charm and had no problems at all. I even uninstalled all the bloatware samsung and the carrier had installed. About 3 weeks ago then an official update poped-up, so I updated my phone through Samsung Kies. Everything went fine, but after the reboot of the phone I noticed that all the bloatware was back, so I just figured, maybe i have to uninstall it again.
But then disaster struck SuperU said there is no SU Binary installed, so I though could have the update unrooted my phone? So I tried rooting it again with Klingo, doesn't work, I tried Framaroot, doesn't work either, I even tried to install Clockworkmod with Odin and it doesn't work. I even repeated the procedure while factory resetting my phone.
Has anyone else encountered this? It seems my phone is somewhere in between being unrooted and rooted? Everything else works fine.
Help! I just want to uninstall the carrier bloatware!
Difference In Android Firmware
ne6c said:
About a month ago I rooted my Samsung Galaxy Grand(the single sim version) with the help of Klingo Root, worked like a charm and had no problems at all. I even uninstalled all the bloatware samsung and the carrier had installed. About 3 weeks ago then an official update poped-up, so I updated my phone through Samsung Kies. Everything went fine, but after the reboot of the phone I noticed that all the bloatware was back, so I just figured, maybe i have to uninstall it again.
But then disaster struck SuperU said there is no SU Binary installed, so I though could have the update unrooted my phone? So I tried rooting it again with Klingo, doesn't work, I tried Framaroot, doesn't work either, I even tried to install Clockworkmod with Odin and it doesn't work. I even repeated the procedure while factory resetting my phone.
Has anyone else encountered this? It seems my phone is somewhere in between being unrooted and rooted? Everything else works fine.
Help! I just want to uninstall the carrier bloatware!
Click to expand...
Click to collapse
When you update your software it actually update your firmware. So the previous method will not work for this firmware.
1. you need to do it with different method if developers found it for you
2. just installed previous version of android .
3. May be fixed by factory reset..
4. You can even install prerooted custom rom like CM11
As per my experience new update will not that much compactible for all phones..
Hi, I'll start from the beginning, so I have a smart phone vodafone 2 (Alcatel V860) I wanted to upload the new software but accidentally I uploaded a backup of the tablet, after uploading the backup phone can not be connected as the flash mode, or in any way, you can not enter the recovery can not in any way connect the computer, the phone is as if dead. when I connect it to the computer when it is turned off the sound indicating that a new device has been detected, however, this software can not be installed. I hope that there will be a magician who already had a similar problem and knows what to do. Please help as soon as possible, if anyone knows what's going on I can talk about it on skype because it seems to me that it will be hard to even describe.
Thanks in advance.
aditya.kamble said:
When you update your software it actually update your firmware. So the previous method will not work for this firmware.
1. you need to do it with different method if developers found it for you
2. just installed previous version of android .
3. May be fixed by factory reset..
4. You can even install prerooted custom rom like CM11
As per my experience new update will not that much compactible for all phones..
Click to expand...
Click to collapse
Can I then "downgrade" through Samsung Kies then?
Flash Firmware through Odin...
ne6c said:
Can I then "downgrade" through Samsung Kies then?
Click to expand...
Click to collapse
No... Samsung kies doesnt provide feature to downgrade android.
You need to flash firmware package through odin.
you can google it for your device or search on xda...
All the best..
Press Thanks button for each person helped you...
It's been 3 days since I had my phone soft bricked. Here's what happened. I had rooted 4.1.2 and my sister accepted OTA when 4.3 (MJ9) came out so I lost my root access. Everything was working fine and I wasn't doing much on my phone so I didn't bother to root it back. 4.3 (VRUAND3) OTA failed on my phone when it came out and I didn't care about it because it was still on 4.3. When 4.4 came out, I decided to do OTA update and everything went fine except when it rebooted. It will pass the samsung logo but when it got to Verizon logo, it was just stuck there. So I searched this forum and tried everything that I found about unbricking the soft bricked phone. All stock roms will fail at sboot.bin except for root66_VZW_stock_system.tar (I did try with and without .pit and I only checked autoreboot F. Reset time) but when I do that then I will get the system software not authorized by Verizon Wireless has been found error (with yellow triangle). Here's the list of stock roms I tried and odin versions.
ROM: root66_VZW_stock_system.tar, I605VZWEMJ9, I605VRALJB, I605VZWAND3 (all with and without .pit)
Odin: 1.85, 3.07, 3.09
The only good thing is that I still have my odin mode and the number of binary didn't change. And I didn't get the knox.....
I really need you guys' expertise... any suggestion will help at this moment... Sorry for the lengthy post I really tried to be specific on what I tried so far.... I'm currently downloading VRAND7 (4.4) and I'm out of the option after I try this one with odin.... Thank you.
gomtingeee said:
It's been 3 days since I had my phone soft bricked. Here's what happened. I had rooted 4.1.2 and my sister accepted OTA when 4.3 (MJ9) came out so I lost my root access. Everything was working fine and I wasn't doing much on my phone so I didn't bother to root it back. 4.3 (VRUAND3) OTA failed on my phone when it came out and I didn't care about it because it was still on 4.3. When 4.4 came out, I decided to do OTA update and everything went fine except when it rebooted. It will pass the samsung logo but when it got to Verizon logo, it was just stuck there. So I searched this forum and tried everything that I found about unbricking the soft bricked phone. All stock roms will fail at sboot.bin except for root66_VZW_stock_system.tar (I did try with and without .pit and I only checked autoreboot F. Reset time) but when I do that then I will get the system software not authorized by Verizon Wireless has been found error (with yellow triangle). Here's the list of stock roms I tried and odin versions.
ROM: root66_VZW_stock_system.tar, I605VZWEMJ9, I605VRALJB, I605VZWAND3 (all with and without .pit)
Odin: 1.85, 3.07, 3.09
The only good thing is that I still have my odin mode and the number of binary didn't change. And I didn't get the knox.....
I really need you guys' expertise... any suggestion will help at this moment... Sorry for the lengthy post I really tried to be specific on what I tried so far.... I'm currently downloading VRAMC3 (4.4) and I'm out of the option after I try this one with odin.... Thank you.
Click to expand...
Click to collapse
The reason they all fail at sboot is bc you are attempting to downgrade to fix it..that's not possible.. so here is what you need to do.
Go to Sammobile.com
Go to Firmwares (top of page)
Scroll down to Search
Type "SCH-I605"
Select & download ND7 4.4.2
Flash via Odin w/ pit
It should pass and you will be good to go
Sent from my SCH-I605 using XDA Free mobile app
lacoursiere18 said:
The reason they all fail at sboot is bc you are attempting to downgrade to fix it..that's not possible.. so here is what you need to do.
Go to Sammobile.com
Go to Firmwares (top of page)
Scroll down to Search
Type "SCH-I605"
Select & download ND7 4.4.2
Flash via Odin w/ pit
It should pass and you will be good to go
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
I saw this post on the development forum [ROM][I605VRUFND7][4.4.2]OFFICIAL STOCK ROOTED ODEX/DEODEX[6/19/2014]
so that rom won't work on mine? just asking out of a curiosity...
gomtingeee said:
I saw this post on the development forum [ROM][I605VRUFND7][4.4.2]OFFICIAL STOCK ROOTED ODEX/DEODEX[6/19/2014]
so that rom won't work on mine? just asking out of a curiosity...
Click to expand...
Click to collapse
Nope. You taking the 4.3 and 4.4.2 OTA locked your bootloader.. so therfore no flashing custom roms like that one and I don't believe there is even a root method yet..
Oh okay thank you for your info. I flashed it to 4.4 and it`s working. I`ll wait for the developer`s to come up with the rooting method for 4.4 thank you guys for everything
Sent from my SCH-I605 using XDA Free mobile app
Hi guys, i'm still new to rooting and roming. Heres what i have done on the absaloutley wonderfull s3 19305LTE 4.3 australian model.
Rooted the phone no problem with odin
There were dramas with superSU but got them fixed when i deleted and re installed superSU.
Accodring to rom manager i backed up my rom. So i'm thinking great, now i can download a rom.
i got the galaxy project rom thing which is working great....however
superSU is now saying that SU binary needs to be installed, it's saying i need to manually re root which i can't seem to do.
Titanium back up is not working.
Rom manager can't find any backups which is juuuuust peachy!!
Now odin won't see the phone when it's in download mode, it only sees the phone when its in normal operation.
and i can't seem to see the ime number or whatever it is, which is probably why odin can't see the phone in download mode?
Can anyone........anybody at all............help?
have u try to reset factory? and see if odin have detect u pda then u can re-root again
konohanz said:
have u try to reset factory? and see if odin have detect u pda then u can re-root again
Click to expand...
Click to collapse
Well, I would say why don't you try factory resetting your device at first and then again try connecting it over the ODIN see if that works out or not ! :cyclops:
ubermorgan said:
Hi guys, i'm still new to rooting and roming. Heres what i have done on the absaloutley wonderfull s3 19305LTE 4.3 australian model.
Rooted the phone no problem with odin
There were dramas with superSU but got them fixed when i deleted and re installed superSU.
Accodring to rom manager i backed up my rom. So i'm thinking great, now i can download a rom.
i got the galaxy project rom thing which is working great....however
superSU is now saying that SU binary needs to be installed, it's saying i need to manually re root which i can't seem to do.
Titanium back up is not working.
Rom manager can't find any backups which is juuuuust peachy!!
Now odin won't see the phone when it's in download mode, it only sees the phone when its in normal operation.
and i can't seem to see the ime number or whatever it is, which is probably why odin can't see the phone in download mode?
Can anyone........anybody at all............help?
Click to expand...
Click to collapse
You need to post in the i9305 q&a section for more detailed help.
Try not to use rom manager, it creates more issues than it fixes.
no imei number will not make odin not connect to it.
Can you access recovery? if so reflash the rom.