So pretty much no matter what I try flashing I get the following immediately: Any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRAMC3_RESTORE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different versions of stock, 4.4, clockwork mod, odin 3.07, 3.09, I've uninstalled and re-installed Kies. right now my phone can't do anything but be in download mode.
ODIN MODE
Product Name: GT-N7100
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
AP SWREV: A2
BrianAnim said:
So pretty much no matter what I try flashing I get the following immediately: Any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRAMC3_RESTORE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different versions of stock, 4.4, clockwork mod, odin 3.07, 3.09, I've uninstalled and re-installed Kies. right now my phone can't do anything but be in download mode.
ODIN MODE
Product Name: GT-N7100
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
AP SWREV: A2
Click to expand...
Click to collapse
Me too. Does misery like company?
I called verizon and told them it failed during an OTA update. They are shipping me out a new phone under warranty.
BrianAnim said:
So pretty much no matter what I try flashing I get the following immediately: Any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRAMC3_RESTORE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different versions of stock, 4.4, clockwork mod, odin 3.07, 3.09, I've uninstalled and re-installed Kies. right now my phone can't do anything but be in download mode.
ODIN MODE
Product Name: GT-N7100
Current Binary: Samsung Official
System Status: Custom
KNOX Warranty VOID: 0
AP SWREV: A2
Click to expand...
Click to collapse
If you have a Verizon Note 2 which is SCH-i605 then I can tell you why Odin isn't working. You flashed a bootloader for the GT-N7100.
These are what I've tried flashing:
N7100XXUFNG4_N7100OLBFNG1_N7100DXUFND2_HOME.tar.md5
N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5
N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
I605_VRALJB_Restore.tar.md5
KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5
KS_MULTI_CSC_N7100XXUEMK4.tar.md5
BrianAnim said:
These are what I've tried flashing:
N7100XXUFNG4_N7100OLBFNG1_N7100DXUFND2_HOME.tar.md5
N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5
N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5
I605_VRALJB_Restore.tar.md5
KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5
KS_MULTI_CSC_N7100XXUEMK4.tar.md5
Click to expand...
Click to collapse
You see all those files that say N7100. That is for a different phone. Not the i605. That is why your phone isn't working. There are a couple of ways to fix the problem in the general section of this forum for the Verizon note 2. I just don't have the time to find them. Also there is mobiltechvideos which I believe can fix this problem for a fee.
BluGuy said:
You see all those files that say N7100. That is for a different phone. Not the i605. That is why your phone isn't working. There are a couple of ways to fix the problem in the general section of this forum for the Verizon note 2. I just don't have the time to find them. Also there is mobiltechvideos which I believe can fix this problem for a fee.
Click to expand...
Click to collapse
Ah, my phone starts up and said n7100 so that's where the confusion lay. I already have my replacement phone and all is well.
I was having serious restarting randomly problems with the old phone and it needed to be RMA'd anyway so no biggy. Thanks for all your help.
An admin can lock this thread.
Related
I NEED SOME HELP
I bought a new note 2 from amazon but for some reason it came modified so i tried to flash a stock rom.
The first flash failed but now the phone is soft bricked
I cant get into recovery mode but i can get into download mode
I've downloaded at least 3 different stock note 2 roms and each time i try i get nand write start operation failed
ive tried different usb cables and computers and different versions of odin all with no luck
Some help asap would be great as im getting desperate.
Im using a Samsung Galaxy note 2 Unlocked SGH-1317
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100UBUFNE2_N7100UUBFNE2_N7100UBUFNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
warriorpanda said:
I NEED SOME HELP
I bought a new note 2 from amazon but for some reason it came modified so i tried to flash a stock rom.
The first flash failed but now the phone is soft bricked
I cant get into recovery mode but i can get into download mode
I've downloaded at least 3 different stock note 2 roms and each time i try i get nand write start operation failed
ive tried different usb cables and computers and different versions of odin all with no luck
Some help asap would be great as im getting desperate.
Im using a Samsung Galaxy note 2 Unlocked SGH-1317
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100UBUFNE2_N7100UUBFNE2_N7100UBUFNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I would recommend taking a look at this thread that should help you solve your problem http://forum.xda-developers.com/showthread.php?t=2851096
hi guys..
is there any wat to downgrade this version (i545VRUFNK1) to 4.3..?
t-mobile_mda said:
hi guys..
is there any wat to downgrade this version (i545VRUFNK1) to 4.3..?
Click to expand...
Click to collapse
yes downgraded..
first flash with this;
MK2_system_4downgrade
then flash,
MK2VZW-downgrade4rooting-AIOdin-gogolie
Bricked S4 SCH-I545
NEED HELP PLEASE!!!
I tried the Odlin3 approach for full wipe (with 3.09, 3.07, 3.10 version) but I get a fail as posted below. I'm completely stuck. I tried using Kies approach posted on another tread and the approach on http://forum.xda-developers.com/showthread.php?t=2751461. Both approaches failed. I've downloaded about 20GB of firmware and each fails. When I just try to power on the device it shows the SAMSUNG name and the "Unlocked" icon. Any suggestions?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
treaklet said:
NEED HELP PLEASE!!!
I tried the Odlin3 approach for full wipe (with 3.09, 3.07, 3.10 version) but I get a fail as posted below. I'm completely stuck. I tried using Kies approach posted on another tread and the approach on http://forum.xda-developers.com/showthread.php?t=2751461. Both approaches failed. I've downloaded about 20GB of firmware and each fails. When I just try to power on the device it shows the SAMSUNG name and the "Unlocked" icon. Any suggestions?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
BladeRunner said:
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
Click to expand...
Click to collapse
ODIN Mode.
BladeRunner said:
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
Click to expand...
Click to collapse
Odin Mode
Ive been trying to fix my Samsung S3 GT- I9300, stuck on Samsung Logo, when i go to android system recovery, i get alot of errors,starting with cant mount efs then followed by alot of red colored errors,data factory reset , wipe partitions, wipe cache is giving errors also, when i go to download mode and tried flashing thru Odin with stock firmware from sammobile using only the PDA/AP
I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar
but gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help!, i dont know what to do next.
zansan said:
Ive been trying to fix my Samsung S3 GT- I9300, stuck on Samsung Logo, when i go to android system recovery, i get alot of errors,starting with cant mount efs then followed by alot of red colored errors,data factory reset , wipe partitions, wipe cache is giving errors also, when i go to download mode and tried flashing thru Odin with stock firmware from sammobile using only the PDA/AP
I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar
but gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help!, i dont know what to do next.
Click to expand...
Click to collapse
Try flashing the latest TWRP through Odin. Download it from their website 2.8.6.1 in .tar format and flash. Then flash the stock firmware.
I had a stock rooted 4.3, wanted to enable OTA updates so I can get 4.4. I got triangleaway and reset flash counter, now I'm seeing "system software not authorized by verizon" message on boot. I tried flashing vruemj9 and vruand3 in Odin but it just fails. Any ideas? Here's the odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the device it says "sw rev. check fail device:3 binary:2"
Thanks in advance
i have galaxy s3 the international model
right now it stucks on the logo. i can get into download mod, but not into recovery.
i've tried to flash stock version. i used first the one file method . didn't work, then i tried the 4 files method
with bootloader etc... but it failed again.
i changed cables, usb ports, nothing!
here's the odin log.
___________________
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMG4_I9300ITVEML2_I9300XXEMG4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
could it be an hardware issue. or theres still chance
thanks..
Check if it says "Custom" on "Current Binary"
This is probably a cause of half SDS(Sudden Death Syndrome),basically your device is dead
Dinkec27 said:
Check if it says "Custom" on "Current Binary"
This is probably a cause of half SDS(Sudden Death Syndrome),basically your device is dead[/Q
in download mode it says:
custom binary download: no
currnet binary: samsung official
system status: official
so maybe its not??
Click to expand...
Click to collapse
I think your device is dead
tyler6389 said:
I think your device is dead
Click to expand...
Click to collapse
i think too, but is there any last options i could try.. like flash it with pit files???