hi guys..
is there any wat to downgrade this version (i545VRUFNK1) to 4.3..?
t-mobile_mda said:
hi guys..
is there any wat to downgrade this version (i545VRUFNK1) to 4.3..?
Click to expand...
Click to collapse
yes downgraded..
first flash with this;
MK2_system_4downgrade
then flash,
MK2VZW-downgrade4rooting-AIOdin-gogolie
Bricked S4 SCH-I545
NEED HELP PLEASE!!!
I tried the Odlin3 approach for full wipe (with 3.09, 3.07, 3.10 version) but I get a fail as posted below. I'm completely stuck. I tried using Kies approach posted on another tread and the approach on http://forum.xda-developers.com/showthread.php?t=2751461. Both approaches failed. I've downloaded about 20GB of firmware and each fails. When I just try to power on the device it shows the SAMSUNG name and the "Unlocked" icon. Any suggestions?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
treaklet said:
NEED HELP PLEASE!!!
I tried the Odlin3 approach for full wipe (with 3.09, 3.07, 3.10 version) but I get a fail as posted below. I'm completely stuck. I tried using Kies approach posted on another tread and the approach on http://forum.xda-developers.com/showthread.php?t=2751461. Both approaches failed. I've downloaded about 20GB of firmware and each fails. When I just try to power on the device it shows the SAMSUNG name and the "Unlocked" icon. Any suggestions?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
BladeRunner said:
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
Click to expand...
Click to collapse
ODIN Mode.
BladeRunner said:
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
Click to expand...
Click to collapse
Odin Mode
Related
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Jet5195 said:
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Click to expand...
Click to collapse
I went through this last month and check these things:
- Try a different USB cord
- Try a different USB port
- Disable your antivirus
- May have to reboot your computer
When I softbricked a few weeks ago I went through this process for the first time, and I found I had to keep trying over and over but it finally ended up working.
Remember to unlock your bootloader after this process - which I did not and had to redo everything after rooting and flashing and getting the Verizon discovered unauthorized software etc.
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Jet5195 said:
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Click to expand...
Click to collapse
Did you try looking through the top stickied post about how to recover from a soft brick? I would go there and see if the info helps and post there. I do think it is strange about the product name but there's got to be a fix so keep on...
Hi,
I tried to flash my Verizon Galaxy S4 but odin failed; I followed this guide, since I do not want to erase my pics.
http://forum.xda-developers.com/showthread.php?t=2301259
I couldn't check my build, so I tried all three factory images (VRUAMDK, VRUAME7,VRUDMI1)
I searched this forum and tried to change computer, cable, and usb port, but I still cannot flash.
Please help me to solve this problem.
FYI, here goes odin message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
newbie)Jay said:
Hi,
I tried to flash my Verizon Galaxy S4 but odin failed; I do not want to erase my pics, so I followed this guide.
http://forum.xda-developers.com/showthread.php?t=2301259
I couldn't check my build, so I tried all three factory images (VRUAMDK, VRUAME7,VRUDMI1)
I searched this forum and tried to change computer, cable, and usb port, but I still cannot flash.
Please help me to solve this problem.
FYI, here goes odin message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You probably need MK2: http://forum.xda-developers.com/showthread.php?t=2578209
Let me try
Oishikatta said:
You probably need MK2: http://forum.xda-developers.com/showthread.php?t=2578209
Click to expand...
Click to collapse
It worked!!! Thank you very much
Mot sure what specs i need to list here. i have the sch-i545, 4.3 and MJ7.
Im trying to use odin to flash stock but i keep getting this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried another .tar and im now getting the firmware upgrade encountered an issue. please select recovery in kies & try again.
I am completely lost and activating my old droidx till this can be fixed.
Denots said:
Mot sure what specs i need to list here. i have the sch-i545, 4.3 and MJ7.
Im trying to use odin to flash stock but i keep getting this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried another .tar and im now getting the firmware upgrade encountered an issue. please select recovery in kies & try again.
I am completely lost and activating my old droidx till this can be fixed.
Click to expand...
Click to collapse
You're using an MDK Odin tar...you need to use an MJ7 Odin tar instead.
Sent from my SCH-I545 using XDA Premium 4 mobile app
I found this file
N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5
looks like same error in odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So where do i go from here?
Denots said:
I found this file
N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5
looks like same error in odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So where do i go from here?
Click to expand...
Click to collapse
Thats for the note 3. Here download this
I tried odin a few times on all of the tar's i have and continued to get the "succeed0/fail1" error but now i can boot up the phone to how i was before the "firmware upgrade error"
Waiting for the file you linked to finish downloading then giving it a try.
UPDATE
The file you linked worked, back on stock now time to get to rooting.
Denots said:
I tried odin a few times on all of the tar's i have and continued to get the "succeed0/fail1" error but now i can boot up the phone to how i was before the "firmware upgrade error"
Waiting for the file you linked to finish downloading then giving it a try.
UPDATE
The file you linked worked, back on stock now time to get to rooting.
Click to expand...
Click to collapse
You're welcome.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Ive been trying to fix my Samsung S3 GT- I9300, stuck on Samsung Logo, when i go to android system recovery, i get alot of errors,starting with cant mount efs then followed by alot of red colored errors,data factory reset , wipe partitions, wipe cache is giving errors also, when i go to download mode and tried flashing thru Odin with stock firmware from sammobile using only the PDA/AP
I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar
but gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help!, i dont know what to do next.
zansan said:
Ive been trying to fix my Samsung S3 GT- I9300, stuck on Samsung Logo, when i go to android system recovery, i get alot of errors,starting with cant mount efs then followed by alot of red colored errors,data factory reset , wipe partitions, wipe cache is giving errors also, when i go to download mode and tried flashing thru Odin with stock firmware from sammobile using only the PDA/AP
I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar
but gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OLBGNB1_I9300DXUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help!, i dont know what to do next.
Click to expand...
Click to collapse
Try flashing the latest TWRP through Odin. Download it from their website 2.8.6.1 in .tar format and flash. Then flash the stock firmware.
Hey all,
My sch-i545 is stuck in download mode, cannot boot. I want to delete everything and start over.
I downloaded the stock 5.0.1 rom, which what i believe was on it before it soft bricked, and every time I try to run odin with the md5 the program becomes unresponsive. Any ideas???
Download this one. It's official stock:
ODIN v3.10:
https://drive.google.com/file/d/0B4RU_ZH5QUASNmxLX3JpejBXREE/view?usp=docslist_api
OC1 image:
https://drive.google.com/file/d/0B4RU_ZH5QUASaU9LcDJ3WWZfdXM/view?usp=docslist_api
Sent from my SCH-I545 using Tapatalk
Thank you for the file. so this time it does not crash odin, but now it says complete write operation failed.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUGOC1_I545VZWGOC1_CL4584173_QB4517016_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Try to use 3.09. It's the only one that worked for me.
Odin 3.0.9 seems to work better, but it fails at a certain point per below.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUGOC1_I545VZWGOC1_CL4584173_QB4517016_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> persdata.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Any thoughts? :-\
You'll want to flash the first link in this one:
http://forum.xda-developers.com/gal...pment/odin-i545vrugoc1-factory-image-t3160125
What you are trying to flash is a ROM someone put together I believe. It's not the exact factory image and is probably not wiping all the bad files.
Thank you for the help so far, but I still have the same problem with writing. It fails after about 7 minutes.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUGOC1_I545VZWGOC1_I545VRUGOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Any ideas? :-\
Download the PIT file and flash that along with the ROM
Sent from my draconis using Tapatalk
I have a pit file from December 2013, the only one I could find. Still have no luck getting it to flash when using that PIT
Any ideas?
Nanometer45 said:
Any ideas?
Click to expand...
Click to collapse
Are you using the stock USB cable you know the Samsung one?
I tried 3 different cables. the one that worked? The USB cable I just got for my S6. Thanks for your help!