Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Sthony said:
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Click to expand...
Click to collapse
I'm not entirely sure if this is what you need to do, but...I had 1.83 stock locked, then used the the OTA 2.3.4 zip, then I flashed the Pudding through RSD 5.3.1, and finally I had to use the "moto-fastboot oem unlock" command to unlock my device. I believe I got the same error before doing the unlock command. Confirm with someone else besides me. I don't want to be responsible for anything you do.
Sthony said:
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Click to expand...
Click to collapse
If you can get into RSD protocol, flash 4.1.57 full sbf, update to 4.1.83, try again.
OSNPA said:
If you can get into RSD protocol, flash 4.1.57 full sbf, update to 4.1.83, try again.
Click to expand...
Click to collapse
I can get into RSD. But i updated through the OTA 2.3.4 zip. Im not to sure if its safe to flash older SBF files.
Its safe as long as u used kenneth version
Sent from my MB860 using XDA Premium App
unknownerr said:
I'm not entirely sure if this is what you need to do, but...I had 1.83 stock locked, then used the the OTA 2.3.4 zip, then I flashed the Pudding through RSD 5.3.1, and finally I had to use the "moto-fastboot oem unlock" command to unlock my device. I believe I got the same error before doing the unlock command. Confirm with someone else besides me. I don't want to be responsible for anything you do.
Click to expand...
Click to collapse
Thanks.. Had really nothing to lose, so i took the gamble. Finished with the fastboot unlock by navigating through the options. Unlocked the BL.Then the phone rebooted back to gingerbread.
Xenocyde said:
Its safe as long as u used kenneth version
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
No I updated through System recovery.
kenneth version worked for me!
Your lucky you didn't flash any sbfs because you would have hard bricked. Good call on finishing unlock that's exactly how I had to do it. For anyone else if you flashed the ota don't flash any sbfs.
Sent from my MB860 using Tapatalk
I really throws the same error, what should I do? what is the easiest method
fix? thanks
Jnewell05 said:
Your lucky you didn't flash any sbfs because you would have hard bricked. Good call on finishing unlock that's exactly how I had to do it. For anyone else if you flashed the ota don't flash any sbfs.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Just so we're all on the same page, it IS alright to flash fruit cakes. Just a side note...
in this thread talking about flash version 4.1.57 of Kenneth (correct?), someone could help me a bit because they do not find it.
I am not necessarily a noob at this because I did a lot of this stuff on my old HTC Aria. But I was trying to unlock my BL doing 2.3.4 steps on 2.3.6 and I managed to get this error:
Code:
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Availible modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery (NO BP)
Vol up to select, vol down for next choice.
Now I think what happened was that I didn't have my phone USB plug plugged into the back port instead I had it in the front one and caused it to fail.
Does anyone know if it's possible to save my phone, and if so what I could do to unlock boot loader for 2.3.6 or 4.5.141.
[EDIT] I forgot to do the fastboot oem unlock which resolved this issue. Phone says unlocked and everything!
[EDIT] I forgot to do the fastboot oem unlock which resolved this issue. Phone says unlocked and everything!
i got the same problem u used the automatic unlock program.......my phone wont get detected my computer am using a laptop ////
I have a question. My friend has a Atrix 4G and I think He soft Bricked it. I took a look at it and I turns on then shows :
SVF: 105:1:2
Failed to boot 0x1000
then says something about svflash or etc and turns off right then and there. is there any way to fix this?
AZNSNSAZN said:
I have a question. My friend has a Atrix 4G and I think He soft Bricked it. I took a look at it and I turns on then shows :
SVF: 105:1:2
Failed to boot 0x1000
then says something about svflash or etc and turns off right then and there. is there any way to fix this?
Click to expand...
Click to collapse
Looks like a hard brick. What did your friend do exactly? What firmware version he had and if he had tried to flash a SBF, what is the version of the SBF?
Share some more details so that we can narrow down on the problem.
Hello! I was plundering with the Jellybeans Eu retail rom today - and the phone seems to have bricked itself in Fastboot Flash Mode - leaving me with RSD lite v6.0 not being able to flash anything. Is there any solution to this? Any way to flash back to stock of some sort?
This flash is the one i tried to flash on my EU Razr Maxx.
9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip
I have tried several Fastboot flashes after this, but the phone gives me " AP Fastboot Flash Mode (S) ( Flash Failed )
and RSD Lite v6.0 gives me "Failed Flashing - Phone returned FAIL"
And nothing shows up on the left hand side of RSD ( ESN N\A, Technology N\A, etc. )
Any help for this? Maybe i did something wrong the first time i flashed?
-Firsty out!
----
EDIT:
Problem solved by using a USB2.0 port on my computer... darn these tiny things!
I need some help with my cellphone, when the system starts it loops in motorola logo.
Yesterday a friend gave me an Atrix 4G with this problem. I don't know what version of android it was using or if the bootloader was locked so i tried to repair it by flashing an stock 2.3.4 .sbf with RSD Lite but it fails and windows give me an error with "qhsusb_dload failed to install the driver". Then i tried to install the stock 2.3.6 and the process fails again but this time there is no qhsusb_dload problem or at least windows doesn't shows it.
RSD Lite gave me this:Failed flashing process. Interface AP-OS: Error flashing subscriber unit. Device API Error: 0xE0020090 Address: 0x2000 Command: BIN (0xe0323090); phone connected
I can enter RSD protocol support and Fastboot without problem.
I will appreciate any advice and help!!!!
Hello ALL!
I have problem with my Atrix. I've read a lot of threads... but now I really need expert opinion.
1) I tried to use RDS Lite 5.3.1 to reprogram my Moto with sbf (http://forum.xda-developers.com/show....php?t=1125944) file taking into account HOW TO FLASH A SBF: on the first page of this thread. I have 4.5.91 version (I bought my phone about mounth ago in amazon). I put my device in RSD Protocol Mode, but RSD Lite did not see my phone.
what could be a reason? what could I do?
2) I tried another mode: BP HW Bypass RSD
There was message on the phone screen:
" BP HW Bypass RSD
Starting USB3 Hardware Bypass RSD Mode
BP switched to RSD mode"
in this case RSD Lite see my Motorola
(
Bootload Version v0x00110
Phone type: Production (30098D9D3030313430310810060B)
Model
Flash MDM6600
)
I tried to flash with sbf file Atrix 4G - US MB860
Branding: AT&T US
Version: 4.5.91 NO DOWNGRADE
Android Version: 2.3.4 NEW!
Bootloader Version: N/A
Webtop version: N/A
Requires RSD Lite 5.0.0
Requires Moto Android (De)packer 1.3 to edit.
Firsly I renamed 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf to 1FF.sbf. Pressed start. After fisrt task went to 100% had Error:
"Status:
Failed flashing process. Phone(0000)Phone is not compatible with multi-interface super file (0x703B; phone connected)".
3) Android recovery mode doesn't work. After standard procedure, I had message on the phone screen:
" Android recovery
Failed to boot 2"
Do you need any additional information?
Do you have any suggestions?
OxmooseXD said:
Hello ALL!
I have problem with my Atrix. I've read a lot of threads... but now I really need expert opinion.
1) I tried to use RDS Lite 5.3.1 to reprogram my Moto with sbf (http://forum.xda-developers.com/show....php?t=1125944) file taking into account HOW TO FLASH A SBF: on the first page of this thread. I have 4.5.91 version (I bought my phone about mounth ago in amazon). I put my device in RSD Protocol Mode, but RSD Lite did not see my phone.
what could be a reason? what could I do?
2) I tried another mode: BP HW Bypass RSD
There was message on the phone screen:
" BP HW Bypass RSD
Starting USB3 Hardware Bypass RSD Mode
BP switched to RSD mode"
in this case RSD Lite see my Motorola
(
Bootload Version v0x00110
Phone type: Production (30098D9D3030313430310810060B)
Model
Flash MDM6600
)
I tried to flash with sbf file Atrix 4G - US MB860
Branding: AT&T US
Version: 4.5.91 NO DOWNGRADE
Android Version: 2.3.4 NEW!
Bootloader Version: N/A
Webtop version: N/A
Requires RSD Lite 5.0.0
Requires Moto Android (De)packer 1.3 to edit.
Firsly I renamed 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf to 1FF.sbf. Pressed start. After fisrt task went to 100% had Error:
"Status:
Failed flashing process. Phone(0000)Phone is not compatible with multi-interface super file (0x703B; phone connected)".
3) Android recovery mode doesn't work. After standard procedure, I had message on the phone screen:
" Android recovery
Failed to boot 2"
Do you need any additional information?
Do you have any suggestions?
Click to expand...
Click to collapse
http://sbf.droid-developers.org/