recently i installed custom rom on my canvas hd and after that my sim cards r not getting detected. I tried all the possible ways ranging from,
1.Goto engineer mode and type EGMR+="......", bt result AT command failed to send
2. using SN write tools,
3.MTK droid tools
4. MAUI/META 3G tool
5.replacing MPOB_01 file in NVRAM_IMEI
5 din work!
using 2,3,4 tools the imei gets writtten but when the phone gets restarted invalid imei & the phone's baseband version is also nil!
none of them worked with my phone, so please me out and find a solution.
a116bharath said:
recently i installed custom rom on my canvas hd and after that my sim cards r not getting detected. I tried all the possible ways ranging from,
1.Goto engineer mode and type EGMR+="......", bt result AT command failed to send
2. using SN write tools,
3.MTK droid tools
4. MAUI/META 3G tool
5.replacing MPOB_01 file in NVRAM_IMEI
5 din work!
using 2,3,4 tools the imei gets writtten but when the phone gets restarted invalid imei & the phone's baseband version is also nil!
none of them worked with my phone, so please me out and find a solution.
Click to expand...
Click to collapse
Goto settings > about phone and then check the baseband version. Is it showing " unknown"?
If u r having unknown baseband error then you have to format your a116 using sp flash tools and then again using sp flash tools you have to flash stock rom to you a116. Afterwards use enter engineering mode to enter imei
arnabkhanra said:
Goto settings > about phone and then check the baseband version. Is it showing " unknown"?
If u r having unknown baseband error then you have to format your a116 using sp flash tools and then again using sp flash tools you have to flash stock rom to you a116. Afterwards use enter engineering mode to enter imei
Click to expand...
Click to collapse
Thanks a lot..! u saved my day!
Related
Good day People,
I don't want to beat around the bush so, I installed customROM works fine. then I reverted back to stockROM then IMEI is gone.
I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
Can someone help me. I don't know if I am on the right thread but it says ask anything.
Thanks in Advance.
phaw16 said:
Good day People,
I don't want to beat around the bush so, I installed customROM works fine. then I reverted back to stockROM then IMEI is gone.
I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
Can someone help me. I don't know if I am on the right thread but it says ask anything.
Thanks in Advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2400829
Press Thanks if helped.
hnkotnis said:
Try this
http://forum.xda-developers.com/showthread.php?t=2400829
Press Thanks if helped.
Click to expand...
Click to collapse
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
Hello can you provide me a link where i can download cherry mobile fuze stock firmware thanks you very much
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
hey dude .did your phone fix??
a114 user mt6582
hi dude did u resolve that ..now i got that problem man ..the thing which happend to u turned to me just formatted completley and now suffering...searching solutions for two days....jus tell me if u find the solution dude ... email to [email protected]
we have a same problem.
I fixed my phone (FUZE) ... .
just flash the phone in Firmware with "SEC_RO" file.
Fix IMEI, at least for MT6589 Gigabyte GSmart Aku A1 (if *#06# show Invalid IMEI):
Call *#*#3646633#*#* Engineer mode, Connectivity, CDS Info, Radio Info,
Phone 1: AT+EGMR=1,7,"myIMEI" <send>
Phone 2: AT+EGMR=1,10,"myIMEI2" <send>
Hello @phaw16, @nandhu.crab19 : Can you resolve that problem?
I have the same here my phone is Blu Dash 5.5 D470u with mt6582 processor.
The meta mode is failed to connect. Drivers are ok.
guys i need your help to fix back my Kata T-mini 4.4.2 [MTK6582]. i just did a flash recovery using the recovery tool app. after the flash it reboot automatically but then no signal shown when i check it using the MTK Tool showing "null IMEI andi unknown baseband". when i open the wifi cant connect to any network. hoping someone cud help me here. i tried already all the methods on how to recovery the imei but still not working. and my phablet cant be read in SP Flash tools.
Basicly loaded a dual sim rom on a single sim Acer Liquid Z200.
was helped so far in this thread: http://forum.xda-developers.com/and...ms-cwm-root-acer-liquid-t2960787/post59482099 by @Shreps, but somehow i got this message that due to the 10 post rule i wasnt able to post anymore.
Downloaded the last zip file, but CMW doesnt seem to recognize my SD card.
Tried to load the rom with adb using sideload, but get the message cant find device.
Is it possible to load another version of CMW, mount it with USB and flash the zip file from the pc? And can i use any CMW file or are the custom made for each type of phone/brand?
Any other suggestions, got no clue what to do now
edit 18-3-15:
Tried to re-load CWM with Smart Phone Flash Tool and got this PMT changed for the ROM; it must be downloaded
Update:
Did a format of the device using Flash Tool, MTK USB poort was loaded and was able to flash the ROM for dual SIM.
@stef951
Try to flash this firmware from a Recovery :
update-Acer_AV0K0_Z200_1.012.00_EMEA_GEN1S-sds.zip
It's the stock firmware Single SIM EMEA GEN1s, you should back to your original firmware.
Click to expand...
Click to collapse
used recovery to install the firmware for sinlge SIM.
However now stuck with IMEI issues.
Used Mobile Uncle Tool and MTK Engineering to get into Engineering mode, but get this message: "cannot find engineer mode app"
*#*#3646633#*#* doesnt do anything. Possible that Engineer mode isnt installed? And is it possible to install it on my device?
Tried to load IMEI with MTK droid gave me a message "Changes will come into force after reset", but nothing changed -_-
Any other options on this IMEI matter.....?
Finally found a solution to enter Engineering mode, type *#*#2237332846633#*#*
When i try to change the IMEI with AT commad get a message AT command is failed to send
Tried Uncle tools, but unaible to acces engineering mode with this app.
I can enter a valid IMEI in MTK tools, but after reboot its still unknown.
Tried to copy a new MP0B_001 file to the NVD_IMEI folder
but all failed :crying:
Still searching for the solution, but if someone over here can help me out it would be appreciated.
Phone is not reading SIM card neither, is this because of the IMEI issue?
Acer Z200 Working again!!!
GOT MY PHONE BACK TO LIFE!!!
Lost the serial number and IMEI, had to write them back to NVRAM using Maui META tool.
Tutorial how to found on http://www.gizbeat.com/6058/how-to-...-for-mtk6582-mtk6572-mtk6592-mtk6589-mtk6595/
In the attached ZIP the files i used for the Maui META tool
Android_Gadget_CDC_driver, CDC driver didnt got installed so had to do this manually.
MTK6572 database: BPLGUInfoCustomAppSrcP_MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P3_1_wg_n
If you have the serial and IMEI number, go to method B under Restoring Values and add the manaully.
When loading the MTK6572 database i also got a warning: execution warning nvram database file is inconsistent with target load
Ignored the warning and just writed the serial and IMEI to the device.
Disconnected, rebooted and got a working serial and IMEI.
So happy that the damn thing got working again.
bro I saw your successful post about Acer Z200. but I can't install CDC Serial Driver .
. how to Install Manually ? Android_Gadget_CDC_driver, CDC driver.
Can you explain to me.
Thanks in advanced
i have infinix zero 3 .i flashed stock firmware by flash tools by misktake i choose format + download option .i lost my imei num.i try every method to write imei permanently but i fail.. it give error in meta mode .(when mobile is in meta mode ) says no response from other write (error given by sn write tools, ) chip in zero 3 is mt6795 .. anyone hrlp me how can i restore my imei permanently
asdafasdas said:
i have infinix zero 3 .i flashed stock firmware by flash tools by misktake i choose format + download option .i lost my imei num.i try every method to write imei permanently but i fail.. it give error in meta mode .(when mobile is in meta mode ) says no response from other write (error given by sn write tools, ) chip in zero 3 is mt6795 .. anyone hrlp me how can i restore my imei permanently
Click to expand...
Click to collapse
Try ...using mobile uncle tools...it might work for you if not sp flash is your only alternative
Hello xda users,
Yesterday I flashed a custom rom (Darksense) on my elephone p9000. Everything went fine, that's what I thought.
My imei are changed to 111111111111111 and 222222222222222 , I cant receive sms and calls anymore.
Is there any way to change imei for the elephone p9000 ?
I was looking on engineer mode but...
There's no 'cds informations' on this phone.
Thanks in advance for any help.
reflash the stock rom and then follow the video https://youtu.be/w9POQK3kf6U
Reinstalled the Stock ROM but there's still no 'cds informations'
I'm really lost, cant receive any sms nor call :crying:
http://bbs.elephone.hk/thread-12457-1-1.html#.WBzMwPqLQdU
This method returns me that error: "Execution Warning : NVRAM database file is inconsistent with target load"
Still having the imei problem. My phone is a toy right now.
Can anyone give me some help ?
Been waiting for months now to see if the IMEI can be recovered. At this point it's a glorified PDA...
Moved on to bigger better things...
Managed to fix it !
Thanks to @jay98shankar
1) http://www.needrom.com/download/android-6-stock-20160401/ Sign up and download this (dont download the latest official rom(810) this is the only rom which can help you)
2) Flash using sp flash
3) Go to engineer mode you'll find CDS Information
4) Avoid formating your phone using sp tool just - formating made all this problem
Starkkk said:
Managed to fix it !
Thanks to @jay98shankar
1) http://www.needrom.com/download/android-6-stock-20160401/ Sign up and download this (dont download the latest official rom(810) this is the only rom which can help you)
2) Flash using sp flash
3) Go to engineer mode you'll find CDS Information
4) Avoid formating your phone using sp tool just - formating made all this problem
Click to expand...
Click to collapse
Trid this before but hell, try again.
Same results - after entering AT+EGMR"IMEI" (imei number, not IMEI....) I hit Send AT Command and get " INFO - This command is not allowed in UserBuild"
Still no love.....
@ultramag69
Add a space between AT+ and EGMR.
The command must looks like that:
For IMEI 1: AT+ EGMR=1,7,”YOUR NEW IMEI"
For IMEI 2: AT+ EGMR=1,10,”YOUR NEW IMEI"
Starkkk said:
@ultramag69
Add a space between AT+ and EGMR.
The command must looks like that:
For IMEI 1: AT+ EGMR=1,7,”YOUR NEW IMEI"
For IMEI 2: AT+ EGMR=1,10,”YOUR NEW IMEI"
Click to expand...
Click to collapse
Did as you said -
INFO.
AT command is sent:
+CME ERROR: 100
is displayed...
About ready to throw out the window....
Might just use as a codi remote... This is taking too much energy for a Peice Of Sh!t phone...
Download MauiMeta 3G, install the drivers for P9000. I think you can use the same drivers as SP flash tool. Run Mauimeta, choose something like "flash imei", laod file witch is named MDDB_**********.EDB. Shut down your phone, press on start and turn your phone on. Write your imei into the textfields and flash it. (For me it worked only with Stockrom)